Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Pooled Testing Strategies for SARS-CoV-2 diagnosis: A comprehensive review.

ABSTRACT: SARS-CoV-2 has surged across the globe causing the ongoing COVID-19 pandemic. Systematic testing to facilitate index case isolation and contact tracing is needed for efficient containment of viral spread. The major bottleneck in leveraging testing capacity has been the lack of diagnostic resources. Pooled testing is a potential approach that could reduce cost and usage of test kits. This method involves pooling individual samples and testing them 'en bloc'. Only if the pool tests positive, retesting of individual samples is performed. Upon reviewing recent articles on this strategy employed in various SARS-CoV-2 testing scenarios, we found substantial diversity emphasizing the requirement of a common protocol. In this article, we review various theoretically simulated and clinically validated pooled testing models and propose practical guidelines on applying this strategy for large scale screening. If implemented properly, the proposed approach could contribute to proper utilization of testing resources and flattening of infection curve.

SUBMITTER: Daniel EA

PROVIDER: S-EPMC8127528 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Pooled Saliva Specimens for SARS-CoV-2 Testing.

Project description:We evaluated saliva (SAL) specimens for SARS-CoV-2 reverse transcriptase PCR (RT-PCR) testing by comparison of 459 prospectively paired nasopharyngeal (NP) or midturbinate (MT) swabs from 449 individuals with the aim of using saliva for asymptomatic screening. Samples were collected in a drive-through car line for symptomatic individuals (n = 380) and in the emergency department (ED) (n = 69). The percentages of positive and negative agreement of saliva compared to nasopharyngeal swab were 81.1% (95% confidence interval [CI], 65.8% to 90.5%) and 99.8% (95% CI, 98.7% to 100%), respectively. The percent positive agreement increased to 90.0% (95% CI, 74.4% to 96.5%) when considering only samples with moderate to high viral load (cycle threshold [CT ] for the NP, ≤34). Pools of five saliva specimens were also evaluated on three platforms, bioMérieux NucliSENS easyMAG with ABI 7500Fast (CDC assay), Hologic Panther Fusion, and Roche Cobas 6800. The average loss of signal upon pooling was 2 to 3 CT values across the platforms. The sensitivities of detecting a positive specimen in a pool compared with testing individually were 94%, 90%, and 94% for the CDC 2019-nCoV real-time RT-PCR, Panther Fusion SARS-CoV-2 assay, and Cobas SARS-CoV-2 test, respectively, with decreased sample detection trending with lower viral load. We conclude that although pooled saliva testing, as collected in this study, is not quite as sensitive as NP/MT testing, saliva testing is adequate to detect individuals with higher viral loads in an asymptomatic screening program, does not require swabs or viral transport medium for collection, and may help to improve voluntary screening compliance for those individuals averse to various forms of nasal collections.

| S-EPMC8106731 | biostudies-literature

Pooled Saliva Specimens for SARS-CoV-2 Testing.

Project description:We evaluated saliva (SAL) specimens for SARS-CoV-2 RT-PCR testing by comparison of 459 prospectively paired nasopharyngeal (NP) or mid-turbinate (MT) swabs from 449 individuals with the aim of using saliva for asymptomatic screening. Samples were collected in a drive-through car line for symptomatic individuals (N=380) and in the emergency department (ED) (N=69). The percent positive and negative agreement of saliva compared to nasopharyngeal swab were 81.1% (95% CI: 65.8% - 90.5%) and 99.8% (95% CI: 98.7% - 100%), respectively. The sensitivity increased to 90.0% (95% CI: 74.4% - 96.5%) when considering only samples with moderate to high viral load (Cycle threshold (Ct) for the NP <=34). Pools of five saliva specimens were also evaluated on three platforms: bioMérieux NucliSENS easyMAG with ABI 7500Fast (CDC assay), Hologic Panther Fusion, and Roche COBAS 6800. The median loss of signal upon pooling was 2-4 Ct values across the platforms. The sensitivity of detecting a positive specimen in a pool compared with testing individually was 100%, 93%, and 95% for CDC 2019-nCoV Real-Time RT-PCR, Panther Fusion® SARS-CoV-2 assay, and cobas® SARS-CoV-2 test respectively, with decreased sample detection trending with lower viral load. We conclude that although pooled saliva testing, as collected in this study, is not quite as sensitive as NP/MT testing, saliva testing is adequate to detect individuals with higher viral loads in an asymptomatic screening program, does not require swabs or viral transport media for collection, and may help to improve voluntary screening compliance for those individuals averse to various forms of nasal collections.

| S-EPMC7553188 | biostudies-literature

SARS-CoV-2 vaccines strategies: a comprehensive review of phase 3 candidates.

Project description:The new SARS-CoV-2 virus is an RNA virus that belongs to the Coronaviridae family and causes COVID-19 disease. The newly sequenced virus appears to originate in China and rapidly spread throughout the world, becoming a pandemic that, until January 5th, 2021, has caused more than 1,866,000 deaths. Hence, laboratories worldwide are developing an effective vaccine against this disease, which will be essential to reduce morbidity and mortality. Currently, there more than 64 vaccine candidates, most of them aiming to induce neutralizing antibodies against the spike protein (S). These antibodies will prevent uptake through the human ACE-2 receptor, thereby limiting viral entrance. Different vaccine platforms are being used for vaccine development, each one presenting several advantages and disadvantages. Thus far, thirteen vaccine candidates are being tested in Phase 3 clinical trials; therefore, it is closer to receiving approval or authorization for large-scale immunizations.

| S-EPMC7900244 | biostudies-literature

A theoretical simulation of SARS-CoV-2 pooled testing: Pooled sample collection outperforms pooled RNA extraction.

Project description: Not available

| S-EPMC8282448 | biostudies-literature

Increased SARS-CoV-2 Testing Capacity with Pooled Saliva Samples.

Project description:We analyzed feasibility of pooling saliva samples for severe acute respiratory syndrome coronavirus 2 testing and found that sensitivity decreased according to pool size: 5 samples/pool, 7.4% reduction; 10 samples/pool, 11.1%; and 20 samples/pool, 14.8%. When virus prevalence is >2.6%, pools of 5 require fewer tests; when <0.6%, pools of 20 support screening strategies.

| S-EPMC8007323 | biostudies-literature

A comprehensive review about SARS-CoV-2.

Project description:The coronavirus disease (COVID-19) was first identified in China, December 2019. Since then, it has spread the length and breadth of the world at an unprecedented, alarming rate. Severe acute respiratory syndrome coronavirus (SARS-CoV)-2, which causes COVID-19, has much in common with its closest homologs, SARS-CoV and Middle East respiratory syndrome-CoV. The virus-host interaction of SARS-CoV-2 uses the same receptor, ACE2, which is similar to that of SARS-CoV, which spreads through the respiratory tract. Patients with COVID-19 report symptoms including mild-to-severe fever, cough and fatigue; very few patients report gastrointestinal infections. There are no specific antiviral strategies. A few strong medications are under investigation, so we have to focus on proposals which ought to be taken to forestall this infection in a living host.

| S-EPMC7664148 | biostudies-literature

Controlling SARS-CoV-2 in schools using repetitive testing strategies.

Project description:SARS-CoV-2 remains a worldwide emergency. While vaccines have been approved and are widely administered, there is an ongoing debate whether children should be vaccinated or prioritized for vaccination. Therefore, in order to mitigate the spread of more transmissible SARS-CoV-2 variants among children, the use of non-pharmaceutical interventions is still warranted. We investigate the impact of different testing strategies on the SARS-CoV-2 infection dynamics in a primary school environment, using an individual-based modelling approach. Specifically, we consider three testing strategies: (1) symptomatic isolation, where we test symptomatic individuals and isolate them when they test positive, (2) reactive screening, where a class is screened once one symptomatic individual was identified, and (3) repetitive screening, where the school in its entirety is screened on regular time intervals. Through this analysis, we demonstrate that repetitive testing strategies can significantly reduce the attack rate in schools, contrary to a reactive screening or a symptomatic isolation approach. However, when a repetitive testing strategy is in place, more cases will be detected and class and school closures are more easily triggered, leading to a higher number of school days lost per child. While maintaining the epidemic under control with a repetitive testing strategy, we show that absenteeism can be reduced by relaxing class and school closure thresholds.

| S-EPMC9255973 | biostudies-literature

Pooled testing for SARS-CoV-2 infection in an automated high-throughput platform.

Project description:BackgroundActive detection of SARS-CoV-2 infection through testing is elementary for the control of COVID-19 pandemic. The implementation of large-scale RT-PCR testing has led to a rise in the demand for testing kits whose availability is always a concern.ObjectiveTo find out the feasibility of pooled testing in a high-throughput platform.MethodologyPooled testing was conducted in Roche cobas 6800 in 2 methods. Firstly, the simple two-stage testing algorithm was conducted for 1410 samples individually and then as pooled samples. Secondly, we evaluated the sensitivity of cobas 6800 for the detection of a single positive sample within a pool of negative samples.ResultsImplementing the five-sample Dorfman pooling to test 1410 samples, we identified 42 (2.9%) individual SARS-CoV-2-positive samples and 27 (9.5%) positive pool samples. The pooling strategy precisely identified all the positive samples. All individually negative samples were also accurately determined by pooling. There was 100% sensitivity of detecting positive samples in a pool of negative samples even up to 1:64 dilution. There was a threefold increase in total throughput in one-third of the cost per day.ConclusionA high-throughput platform such as Cobas 6800 can effectively increase the testing capacity by twofold to threefold by adopting the pooled testing strategy for successful management of SARS-CoV-2 and helping in the containment of community transmission.

| S-EPMC8274989 | biostudies-literature

Diagnostics for SARS-CoV-2 detection: A comprehensive review of the FDA-EUA COVID-19 testing landscape.

Project description:The rapidly spreading outbreak of COVID-19 disease is caused by the SARS-CoV-2 virus, first reported in December 2019 in Wuhan, China. As of June 17, 2020, this virus has infected over 8.2 million people but ranges in symptom severity, making it difficult to assess its overall infection rate. There is a need for rapid and accurate diagnostics to better monitor and prevent the spread of COVID-19. In this review, we present and evaluate two main types of diagnostics with FDA-EUA status for COVID-19: nucleic acid testing for detection of SARS-CoV-2 RNA, and serological assays for detection of SARS-CoV-2 specific IgG and IgM patient antibodies, along with the necessary sample preparation for accurate diagnoses. In particular, we cover and compare tests such as the CDC 2019-nCoV RT-PCR Diagnostic Panel, Cellex's qSARS-CoV-2 IgG/IgM Rapid Test, and point-of-care tests such as Abbott's ID NOW COVID-19 Test. Antibody testing is especially important in understanding the prevalence of the virus in the community and to identify those who have gained immunity. We conclude by highlighting the future of COVID-19 diagnostics, which include the need for quantitative testing and the development of emerging biosensors as point-of-care tests.

| S-EPMC7368663 | biostudies-literature

SARS-CoV-2 testing strategies for outbreak mitigation in vaccinated populations.

Project description:Although COVID-19 vaccines are globally available, waning immunity and emerging vaccine-evasive variants of concern have hindered the international response and transition to a post-pandemic era. Testing to identify and isolate infectious individuals remains the most proactive strategy for containing an ongoing COVID-19 outbreak. We developed a stochastic, compartmentalized model to simulate the impact of using Reverse Transcriptase Polymerase Chain Reaction (RT-PCR) assays, rapid antigen tests, and vaccinations on SARS-CoV-2 spread. We compare testing strategies across an example high-income country (the United States) and low- and middle-income country (India). We detail the optimal testing frequency and coverage in the US and India to mitigate an emerging outbreak even in a vaccinated population: overall, maximizing testing frequency is most important, but having high testing coverage remains necessary when there is sustained transmission. A resource-limited vaccination strategy still requires high-frequency testing to minimize subsequent outbreaks and is 16.50% more effective in reducing cases in India than the United States. Tailoring testing strategies to transmission settings can help effectively reduce disease burden more than if a uniform approach were employed without regard to epidemiological variability across locations.

| S-EPMC9278727 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data