Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Coffee Grounds-Derived CNPs for Efficient Cr(VI) Water Remediation.

ABSTRACT: Carbon nanomaterials are a group of materials characterized by sp²/sp³ carbon backbone which, combined with surface atoms and/or chemical groups, ensures peculiar physical chemical features for a wide range of applications. Among these materials, carbon dots and carbon nanoparticles belong to carbon nanomaterials with a few nanometer dimensions. In this work, carbon nanoparticles were produced from spent coffee grounds as sustainable carbon source through a simple, cheap and eco-friendly procedure according to an oxidation process (at controlled temperature) driven by hydrogen peroxide. Atomic Force Microscope (AFM) and fluorescence, UV-Vis absorption, FT-IR and Raman spectroscopy were used to assess the formation of carbon nanomaterials of about 10 nm with the typical emission and absorption properties of carbon dots and peculiar surface features. In fact, the presence of heteroatoms, i.e., phosphorus, and the carbonyl/carboxyl surface groups on carbon nanoparticles, was proposed to confer peculiar properties allowing the fast Mn(VII) reduction to Mn(II) at neutral pH and the Cr(VI) reduction to Cr(III) in weak acid aqueous media.

SUBMITTER: Bettini S

PROVIDER: S-EPMC8143114 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Impact of an in-situ Cr(VI)-contaminated site remediation on the groundwater.

Project description:This study presents the latest results of the groundwater monitoring of a research project, which tested an innovative pump and treat method in combination with an in-situ remediation. This technique was assessed on an abandoned site in Austria, where two hot spots of hexavalent chromium (Cr(VI)) were located. For the in-situ remediation, a strong reducing agent (sodium dithionite) was injected into the underground to reduce Cr(VI) to Cr(III) by using different injection strategies. Throughout this treatment, part of the Cr(VI) is mobilized and not instantly reduced. To prevent a further spreading of the mobilized Cr(VI), the pump and treat method, which uses zero-valent iron to clean the groundwater, was installed downgradient of the hot spots. Based on the groundwater sample analyses, it was possible to distinguish different remediation phases, characterized by excess chromate and excess sulfite. During the excess sulfite conditions, Cr(VI) was successfully removed from the system, but after terminating the sodium dithionite injection, the Cr(VI) rebounded.

| S-EPMC7190687 | biostudies-literature

Graphite Whiskers Derived from Waste Coffee Grounds Treated at High Temperature.

Project description:Graphite whiskers (GWs) are obtained from coffee grounds (CGs) treated at 2500 °C for 1 h in the presence of Ar gas at 1 atm. The majority of the GWs formed inside the CGs shell are rod-like with a conical tip with diameter and length in the range between 1 to 3 µm and 4 to 10 µm, respectively. At first, the carbon layer might be grown in a turbostratic manner, and then progressively graphitized at higher temperature. The strong G' peak intensity might be induced by the disclination of graphitized carbon layers.

| S-EPMC6686167 | biostudies-literature

Efficient Reduction of Cr(VI) with Carbon Quantum Dots.

Project description:Hexavalent chromium (Cr(VI)) pollution is a global problem, and the reduction of highly toxic Cr(VI) to less toxic Cr(III) is considered to be an effective method to address Cr(VI) pollution. In this study, low-toxicity carbon quantum dots (CQDs) were used to reduce Cr(VI) in wastewater. The results show that CQDs can directly reduce Cr(VI) at pH 2 and can achieve a reduction efficiency of 94% within 120 min. It is observed that under pH higher than 2, CQDs can activate peroxymonosulfate (PMS) to produce reactive oxygen species (ROS) for the reduction of Cr(VI) and the reduction efficiency can reach 99% within 120 min even under neutral conditions. The investigation of the mechanism shows that the hydroxyl groups on the surface of CQDs can be directly oxidized by Cr(VI) because of the higher redox potential of Cr(VI) at pH 2. As the pH increases, the carbonyl groups on the surface of CQDs can activate PMS to generate ROS, O2 •-, and 1O2, which result in Cr(VI) being reduced. To facilitate the practical application of CQDs, the treatment of Cr(VI) in real water samples by CQDs was simulated and the method reduced Cr(VI) from an initial concentration of 5 mg/L to only 8 μg/L in 150 min, which is below the California water quality standard of 10 μg/L. The study provides a new method for the removal of Cr(VI) from wastewater and a theoretical basis for practical application.

| S-EPMC9280965 | biostudies-literature

Cr-Detector: A simple chemosensing system for onsite Cr (VI) detection in water.

Project description:Due to the increase in urbanization and industrialization, the load of toxicants in the environment is alarming. The most common toxicants, including heavy metals and metalloids such as hexavalent Chromium, have severe pathophysiological impacts on humans and other aquatic biotas. Therefore, developing a portable rapid detection device for such toxicants in the aquatic environment is necessary. This work portrays the development of a field-portable image analysis device coupled with 3,3',5,5'-tetramethylbenzidine (TMB) as a sensing probe for chromium (VI) detection in the aquatic ecosystem. Sensor parameters, such as reagent concentration, reaction time, etc., were optimized for the sensor development and validation using a commercial UV-Vis spectrophotometer. The chemoreceptor integrated with a uniform illumination imaging system (UIIS) revealed the system's applicability toward Cr(VI) detection. The calibration curve using the R-value of image parameters allows Cr(VI) detection in the linear range of 25 to 600 ppb, which covers the prescribed permissible limit by various regulatory authorities. Furthermore, the adjusted R2 = 0.992 of the linear fit and correlation coefficients of 0.99018 against the spectrophotometric method signifies the suitability of the developed system. This TMB-coupled field-portable sensing system is the first-ever reported image analysis-based technology for detecting a wide range of Cr(VI) in aquatic ecosystems to our knowledge.

| S-EPMC10763940 | biostudies-literature

Remediation of chromium-slag leakage with electricity cogeneration via a urea-Cr(VI) cell.

Project description:Chromium pollution has been historically widespread throughout the world. Most available remediation technologies often require energy consumption. This study is aimed to develop electrochemical remediation for Cr(VI) in chromium-slag leakage with self-generated electricity. Dynamic leaching experiments of chromium-slag samples were conducted to survey the release and leaching behavior of Cr(VI). Based on previous work, a unique urea-Cr(VI) was designed, in which urea was employed as the fuel and Cr(VI) from the leakage of the dichromate slag served as the oxidant. Furthermore, the electrochemical results showed that the removal percent of Cr(VI) was more than 96% after 18 h with the leakage Cr(VI) concentration of 2.69 mM. The open circuit potential (OCP) varied in the range of 1.56 ~ 1.59 V under different initial Cr(VI) leakage concentrations. The approach explores the feasibility of the promising technique without the need of energy input for simultaneous chromium-slag remediation and generation of electricity.

| S-EPMC4148671 | biostudies-other

Speciation Analysis of Cr(VI) and Cr(III) in Water with Surface-Enhanced Raman Spectroscopy.

Project description:Identifying and quantifying chromium in water are important for the protection of precious water resources from chromium pollution. Standard methods however are unable to easily distinguish toxic hexavalent chromium, Cr(VI), from innocuous trivalent chromium, Cr(III), are time-consuming, or require large sample quantity. We show in this report that Cr(VI) and Cr(III) in water can be differentiated based on their distinct spectral features of surface-enhanced Raman scattering (SERS). Their SERS signals exhibit different pH dependences: the SERS features of Cr(VI) and Cr(III) are most prominent at pH values of 10 and 5.5, respectively. The obtained limit of detection of Cr(VI) in water is below 0.1 mg/L. Both concentration curves of their SERS signals show Langmuir sorption isotherm behavior. A procedure was developed to quantify Cr(VI) concentration based on the direct retrieval or addition method with an error of 10%. Finally, the SERS detection of Cr(VI) is shown to be insensitive to co-present Cr(III). The developed SERS procedure offers potential to monitor toxic chromium in fields.

| S-EPMC7841920 | biostudies-literature

Dataset on statistical reduction of highly water-soluble Cr (VI) into Cr (III) using RSM.

Project description:With the excellent solubility, mobility, bioaccumulation and carcinogenesis, hexavalent chromium Cr (VI), widely exists in various industrial effluents such as chrome plating, metal finishing, pigments, and tanning. Cr (VI) is one of the toxic metal pollutants among all the heavy metals. Therefore, the purpose of this work was to convert highly water-soluble Cr (VI) into Cr (III) species using electrocoagulation (EC) process. The Box-Behnken design (BBD) as was applied to investigate the effects of major operating variables and optimization conditions. The predicted values of responses obtained using the model is agreed well with the experimental data. This work demonstrated that the Cr (VI) is entirely converted into Cr (III) in solid-phases in electrocoagulation process. It was also found that reduction increased with current density that suggesting that the reduction efficiency is closely related to the generation of floc.

| S-EPMC6377185 | biostudies-literature

Advancing Cr(VI) Electroreduction: A Redox Mediator to Catalyze the Electrochemical Reduction of Cr(VI) in Water While Preventing Fouling of Carbon Electrodes.

Project description:Hexavalent chromium is a contaminant of concern and is found in drinking water supplies. Electrochemical methods are well-suited to accomplish the reduction of toxic Cr(VI) to Cr(III). However, high overpotentials and plating of Cr(III) products on electrodes have stymied the development of efficacious purification methods. The Cr(VI) reduction reaction necessitates the transfer of multiple protons and electrons, which is accompanied by a high kinetic barrier. Following recent advances in the electrocatalytic energy storage community, we report that the use of [Fe(CN)6]3- as a small molecular electrocatalyst not only diminishes the overpotential for Cr(VI) reduction on carbon electrodes by 0.575 V, but also prevents electrode fouling by mediating solution-phase homogeneous electron transfers.

| S-EPMC10853914 | biostudies-literature

Polyacrylonitrile/Aminated Polymeric Nanosphere Nanofibers as Efficient Adsorbents for Cr(VI) Removal.

Project description:In this work, polyacrylonitrile/aminated polymeric nanosphere (PAN/APN) nanofibers were prepared by electrospinning of monodispersed aminated polymeric nanospheres (APNs) for removal of Cr(VI) from aqueous solution. Characterization results showed that obtained PAN/APNs possessed nitrogen functionalization. Furthermore, the adsorption application results indicated that PAN/APN nanofibers exhibited a high adsorption capacity of 556 mg/g at 298 K for Cr(VI) removal. The kinetic data showed that the adsorption process fits the pseudo-second order. A thermodynamic study revealed that the adsorption of Cr(VI) was spontaneous and endothermic. The coexisting ions Na+, Ca2+, K+, Cl-, NO3- and PO43- had little influence on Cr(VI) adsorption, while SO42- in solution dramatically decreased the removal performance. In the investigation of the removal mechanism, relative results indicated that the adsorption behavior possibly involved electrostatic adsorption, redox reaction and chelation. PAN/APN nanofibers can detoxify Cr(VI) to Cr(III) and subsequently chelate Cr(III) on its surface. The unique structure and nitrogen functionalization of PAN/APN nanofibers make them novel and prospective candidates in heavy metal removal.

| S-EPMC9611933 | biostudies-literature

Facile preparation of hybrid porous polyanilines for highly efficient Cr(vi) removal.

Project description:In the present work, leucoemeraldine-based hybrid porous polyanilines (LHPPs) have been synthesized by the Friedel-Crafts reaction of leucoemeraldine and octavinylsilsesquioxane (OVS) for Cr(vi) removal. The resulting LHPPs were characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy and N2 adsorption-desorption. The findings indiated that the LHPPs were amorphous, with apparent surface areas (S BET) in the range of 147 to 388 m2 g-1 and total volumes in the range of 0.13 to 0.44 cm3 g-1. Cr(vi) removal experiments displayed that the LHPPs exhibited highly efficient Cr(vi) removal performance. The maximum Cr(vi) removal capacity of LHPP-1 was 990.1 mg g-1 at 308 K and pH 1, which is higher than those of other reported polyaniline-based adsorbents. The adsorption process was a spontaneous, endothermic and chemical adsorption process. The adsorption behavior agreed well with Langmuir models and pseudo second-order equations. X-ray photoelectron spectroscopy and Fourier transformed infrared (FTIR) spectroscopy analysis revealed that the highly efficient Cr(vi) removal performance can be mainly attributed to the existence of numerous amine and imine groups on the surface of the LHPPs; these can function as adsorption active sites for Cr(vi) removal through electrostatic adsorption and reduction to Cr(iii) under acidic conditions. Moreover, the LHPPs exhibited excellent adsorption selectivity for Cr(vi) despite the presence of other metal ions (K+, Cu2+, Mn2+) and anions (NO3 -, SO4 2-). Therefore, the LHPPs have potential applications for Cr(vi) removal in industrial wastewater.

| S-EPMC9086322 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data