Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Exploration of Driver Posture Monitoring Using Pressure Sensors with Lower Resolution.

ABSTRACT: Pressure sensors are good candidates for measuring driver postural information, which is indicative for identifying driver's intention and seating posture. However, monitoring systems based on pressure sensors must overcome the price barriers in order to be practically feasible. This study, therefore, was dedicated to explore the possibility of using pressure sensors with lower resolution for driver posture monitoring. We proposed pressure features including center of pressure, contact area proportion, and pressure ratios to recognize five typical trunk postures, two typical left foot postures, and three typical right foot postures. The features from lower-resolution mapping were compared with those from high-resolution Xsensor pressure mats on the backrest and seat pan. We applied five different supervised machine-learning techniques to recognize the postures of each body part and used leave-one-out cross-validation to evaluate their performance. A uniform sampling method was used to reduce number of pressure sensors, and five new layouts were tested by using the best classifier. Results showed that the random forest classifier outperformed the other classifiers with an average classification accuracy of 86% using the original pressure mats and 85% when only 8% of the pressure sensors were available. This study demonstrates the feasibility of using fewer pressure sensors for driver posture monitoring and suggests research directions for better sensor designs.

SUBMITTER: Zhao M

PROVIDER: S-EPMC8151731 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Patient Posture Monitoring System Based on Flexible Sensors.

Project description:Monitoring patients using vision cameras can cause privacy intrusion problems. In this paper, we propose a patient position monitoring system based on a patient cloth with unobtrusive sensors. We use ﬂexible sensors based on polyvinylidene ﬂuoride, which is a ﬂexible piezoelectric material. Theﬂexiblesensorsareinsertedintopartsclosetothekneeandhipoftheloosepatientcloth. We measure electrical signals from the sensors caused by the piezoelectric effect when the knee and hip in the cloth are bent. The measured sensor outputs are transferred to a computer via Bluetooth. We use a custom-made program to detect the position of the patient through a rule-based algorithm and the sensor outputs. The detectable postures are based on six human motions in and around a bed. The proposed system can detect the patient positions with a success rate over 88 percent for three patients.

| S-EPMC5375870 | biostudies-literature

Lower Body Kinematics Monitoring in Running Using Fabric-Based Wearable Sensors and Deep Convolutional Neural Networks.

Project description:Continuous kinematic monitoring of runners is crucial to inform runners of inappropriate running habits. Motion capture systems are the gold standard for gait analysis, but they are spatially limited to laboratories. Recently, wearable sensors have gained attention as an unobtrusive method to analyze performance metrics and the health conditions of runners. In this study, we developed a system capable of estimating joint angles in sagittal, frontal, and transverse planes during running. A prototype with fiber strain sensors was fabricated. The positions of the sensors on the pelvis were optimized using a genetic algorithm. A cohort of ten people completed 15 min of running at five different speeds for gait analysis by our prototype device. The joint angles were estimated by a deep convolutional neural network in inter- and intra-participant scenarios. In intra-participant tests, root mean square error (RMSE) and normalized root mean square error (NRMSE) of less than 2.2° and 5.3%, respectively, were obtained for hip, knee, and ankle joints in sagittal, frontal, and transverse planes. The RMSE and NRMSE in inter-participant tests were less than 6.4° and 10%, respectively, in the sagittal plane. The accuracy of this device and methodology could yield potential applications as a soft wearable device for gait monitoring of runners.

| S-EPMC6928687 | biostudies-literature

Intracompartmental Pressure Monitoring Using a Handheld Pressure Monitoring System.

Project description:Introduction:We describe the correct technique for measuring compartment pressure with a handheld device to diagnose compartment syndrome. Step 1 Device Preparation:Proper preparation of the handheld pressure monitoring device (Stryker Surgical, Kalamazoo, Michigan) is critical to ensure that the device performs appropriately. Step 2 Identification of the Compartment of Interest:The needle must be placed in the proper location to appropriately measure a compartment's pressure. Step 3 Injection:Inject saline solution from the pressure monitoring device to clear any soft tissue from the side port on the needle that could result in inaccurate pressure measurements. Step 4 Stabilization and Pressure Reading:The pressure must reach a stable state before it is recorded; different pressure thresholds for decompression have been recommended in the literature. Step 5 Repeat Measurements:As mistakes can be made with any single measurement, accuracy may be improved by repeating steps 1 through 4 and averaging the results. Step 6 Additional Compartments:After the reading is obtained, move on to any additional compartment(s) that need to be evaluated, repeating the steps listed above. Results:The handheld intracompartmental monitoring device with a side-ported needle has been shown to be extremely accurate in the laboratory.IndicationsContraindicationsPitfalls & Challenges.

| S-EPMC6221417 | biostudies-other

Monitoring cooperative binding using electrochemical DNA-based sensors.

Project description:Electrochemical DNA-based (E-DNA) sensors are utilized to detect a variety of targets including complementary DNA, small molecules, and proteins. These sensors typically employ surface-bound single-stranded oligonucleotides that are modified with a redox-active molecule on the distal 3' terminus. Target-induced flexibility changes of the DNA probe alter the efficiency of electron transfer between the redox active methylene blue and the electrode surface, allowing for quantitative detection of target concentration. While numerous studies have utilized the specific and sensitive abilities of E-DNA sensors to quantify target concentration, no studies to date have demonstrated the ability of this class of collision-based sensors to elucidate biochemical-binding mechanisms such as cooperativity. In this study, we demonstrate that E-DNA sensors fabricated with various lengths of surface-bound oligodeoxythymidylate [(dT)n] sensing probes are able to quantitatively distinguish between cooperative and noncooperative binding of a single-stranded DNA-binding protein. Specifically, we demonstrate that oligo(dT) E-DNA sensors are able to quantitatively detect nM levels (50 nM-4 ?M) of gene 32 protein (g32p). Furthermore, the sensors exhibit signal that is able to distinguish between the cooperative binding of the full-length g32p and the noncooperative binding of the core domain (*III) fragment to single-stranded DNA. Finally, we demonstrate that this binding is both probe-length- and ionic-strength-dependent. This study illustrates a new quantitative property of this powerful class of biosensor and represents a rapid and simple methodology for understanding protein-DNA binding mechanisms.

| S-EPMC4303326 | biostudies-literature

Piezoelectric polymer nanofibers for pressure sensors and their applications in human activity monitoring.

Project description:Miniaturized, wearable and self-powered sensors are crucial for applications in artificial intelligence, robotics, healthcare, and communication devices. In particular, piezoelectric polymer-based sensing systems have the advantages of light weight, large piezoelectricity and mechanical flexibility, offering great opportunities in flexible and stretchable electronic devices. Herein, free-standing large-size nanofiber (NF) membranes have been fabricated by an electrospinning technique. Our results show that the as-synthesized P(VDF-TrFE) NFs are pure β-phase and exhibit excellent mechanical and thermal properties. Besides having high sensitivity and operational stability, the fibrous sensor can generate remarkable electrical signals from applied pressure, with an output voltage of 18.1 V, output current of 0.177 μA, and power density of 22.9 μW cm-2. Moreover, such sensors also produce significant electrical performance of up to a few volts under human mechanical stress, thereby allowing for the monitoring of biomechanical movement of the human foot, elbow, and finger. Our study sheds light onto the use of piezoelectric polymers for flexible self-powered sensing electronics and wearable devices.

| S-EPMC9054528 | biostudies-literature

Rate-based structural health monitoring using permanently installed sensors.

Project description:Permanently installed sensors are becoming increasingly ubiquitous, facilitating very frequent in situ measurements and consequently improved monitoring of 'trends' in the observed system behaviour. It is proposed that this newly available data may be used to provide prior warning and forecasting of critical events, particularly system failure. Numerous damage mechanisms are examples of positive feedback; they are 'self-accelerating' with an increasing rate of damage towards failure. The positive feedback leads to a common time-response behaviour which may be described by an empirical relation allowing prediction of the time to criticality. This study focuses on Structural Health Monitoring of engineering components; failure times are projected well in advance of failure for fatigue, creep crack growth and volumetric creep damage experiments. The proposed methodology provides a widely applicable framework for using newly available near-continuous data from permanently installed sensors to predict time until failure in a range of application areas including engineering, geophysics and medicine.

| S-EPMC5627375 | biostudies-literature

Model-based monitoring of diffuser fouling using standard sensors.

Project description:Fouling of fine-pore diffusers can cause substantial aeration energy wastage. It remains challenging to monitor their condition and decide the optimal time for labour-intensive and costly cleaning actions. In this study, we show that data from standard sensors (airflow rate, dissolved oxygen concentration, pressure and airflow valve position), which are fed to simple models, can track the diffuser's condition. Additionally, the parameter estimation of diffuser dynamic wet pressure, oxygen transfer rate, respiration rate and the joint alpha fouling factor (αF) was facilitated by an active fault detection inspired method. The method executes a sequence with piecewise constant valve positions via the control system. As a result, airflow rates in a sequence similar to a staircase are obtained, which simplifies the estimation of dissolved oxygen dynamics and airflow rate dynamics. The proposed method was evaluated on a full scale over 18 months and successfully detected a reduced cleaning in the diffusers and several sensor-related disturbances. Ultimately, the findings motivate further research on how modelling combined with repetitive process disturbances can leverage data-driven insights from standard instrumentation.

| S-EPMC8473778 | biostudies-literature

Programmable assembly of pressure sensors using pattern-forming bacteria.

Project description:Biological systems can generate microstructured materials that combine organic and inorganic components and possess diverse physical and chemical properties. However, these natural processes in materials fabrication are not readily programmable. Here, we use a synthetic-biology approach to assemble patterned materials. We demonstrate programmable fabrication of three-dimensional (3D) materials by printing engineered self-patterning bacteria on permeable membranes that serve as a structural scaffold. Application of gold nanoparticles to the colonies creates hybrid organic-inorganic dome structures. The dynamics of the dome structures' response to pressure is determined by their geometry (colony size, dome height, and pattern), which is easily modified by varying the properties of the membrane (e.g., pore size and hydrophobicity). We generate resettable pressure sensors that process signals in response to varying pressure intensity and duration.

| S-EPMC6003419 | biostudies-literature

Diagnosing Masked Hypertension Using Ambulatory Blood Pressure Monitoring, Home Blood Pressure Monitoring, or Both?

Project description:Guidelines recommend measuring out-of-clinic blood pressure (BP) to identify masked hypertension (MHT) defined by out-of-clinic BP in the hypertensive range among individuals with clinic-measured BP not in the hypertensive range. The aim of this study was to determine the overlap between ambulatory BP monitoring (ABPM) and home BP monitoring (HBPM) for the detection of MHT. We analyzed data from 333 community-dwelling adults not taking antihypertensive medication with clinic BP <140/90 mm Hg in the IDH study (Improving the Detection of Hypertension). Any MHT was defined by the presence of daytime MHT (mean daytime BP ≥135/85 mm Hg), 24-hour MHT (mean 24-hour BP ≥130/80 mm Hg), or nighttime MHT (mean nighttime BP ≥120/70 mm Hg). Home MHT was defined as mean BP ≥135/85 mm Hg on HBPM. The prevalence of MHT was 25.8% for any MHT and 11.1% for home MHT. Among participants with MHT on either ABPM or HBPM, 29.5% had MHT on both ABPM and HBPM; 61.1% had MHT only on ABPM; and 9.4% of participants had MHT only on HBPM. After multivariable adjustment and compared with participants without MHT on ABPM and HBPM, those with MHT on both ABPM and HBPM and only on ABPM had a higher left ventricular mass index (mean difference [SE], 12.7 [2.9] g/m2, P<0.001; and 4.9 [2.1] g/m2, P=0.022, respectively), whereas participants with MHT only on HBPM did not have an increased left ventricular mass index (mean difference [SE], -1.9 [4.8] g/m2, P=0.693). These data suggest that conducting ABPM will detect many individuals with MHT who have an increased cardiovascular disease risk.

| S-EPMC6207212 | biostudies-literature

Center of Pressure Displacement of Standing Posture during Rapid Movements Is Reorganised Due to Experimental Lower Extremity Muscle Pain.

Project description:BackgroundPostural control during rapid movements may be impaired due to musculoskeletal pain. The purpose of this study was to investigate the effect of experimental knee-related muscle pain on the center of pressure (CoP) displacement in a reaction time task condition.MethodsNine healthy males performed two reaction time tasks (dominant side shoulder flexion and bilateral heel lift) before, during, and after experimental pain induced in the dominant side vastus medialis or the tibialis anterior muscles by hypertonic saline injections. The CoP displacement was extracted from the ipsilateral and contralateral side by two force plates and the net CoP displacement was calculated.ResultsCompared with non-painful sessions, tibialis anterior muscle pain during the peak and peak-to-peak displacement for the CoP during anticipatory postural adjustments (APAs) of the shoulder task reduced the peak-to-peak displacement of the net CoP in the medial-lateral direction (P<0.05). Tibialis anterior and vastus medialis muscle pain during shoulder flexion task reduced the anterior-posterior peak-to-peak displacement in the ipsilateral side (P<0.05).ConclusionsThe central nervous system in healthy individuals was sufficiently robust in maintaining the APA characteristics during pain, although the displacement of net and ipsilateral CoP in the medial-lateral and anterior-posterior directions during unilateral fast shoulder movement was altered.

| S-EPMC4683030 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data