Browse
Submit Data
Databases
API
Help

Dataset Information

35 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effects of ZnMgO Electron Transport Layer on the Performance of InP-Based Inverted Quantum Dot Light-Emitting Diodes.

ABSTRACT: An environment-friendly inverted indium phosphide red quantum dot light-emitting diode (InP QLED) was fabricated using Mg-doped zinc oxide (ZnMgO) as the electron transport layer (ETL). The effects of ZnMgO ETL on the performance of InP QLED were investigated. X-ray diffraction (XRD) analysis indicated that ZnMgO film has an amorphous structure, which is similar to zinc oxide (ZnO) film. Comparison of morphology between ZnO film and ZnMgO film demonstrated that Mg-doped ZnO film remains a high-quality surface (root mean square roughness: 0.86 nm) as smooth as ZnO film. The optical band gap and ultraviolet photoelectron spectroscopy (UPS) analysis revealed that the conduction band of ZnO shifts to a more matched position with InP quantum dot after Mg-doping, resulting in the decrease in turn-on voltage from 2.51 to 2.32 V. In addition, the ratio of irradiation recombination of QLED increases from 7% to 25% using ZnMgO ETL, which can be attributed to reduction in trap state by introducing Mg ions into ZnO lattices. As a result, ZnMgO is a promising material to enhance the performance of inverted InP QLED. This work suggests that ZnMgO has the potential to improve the performance of QLED, which consists of the ITO/ETL/InP QDs/TCTA/MoO₃/Al, and Mg-doping strategy is an efficient route to directionally regulate ZnO conduction bands.

SUBMITTER: Zhang B

PROVIDER: S-EPMC8151885 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Optimizing the PMMA Electron-Blocking Layer of Quantum Dot Light-Emitting Diodes.

Project description:Quantum dots (QDs) are promising candidates for producing bright, color-pure, cost-efficient, and long-lasting QD-based light-emitting diodes (QDLEDs). However, one of the significant problems in achieving high efficiency of QDLEDs is the imbalance between the rates of charge-carrier injection into the emissive QD layer and their transport through the device components. Here we investigated the effect of the parameters of the deposition of a poly (methyl methacrylate) (PMMA) electron-blocking layer (EBL), such as PMMA solution concentration, on the characteristics of EBL-enhanced QDLEDs. A series of devices was fabricated with the PMMA layer formed from acetone solutions with concentrations ranging from 0.05 to 1.2 mg/mL. The addition of the PMMA layer allowed for an increase of the maximum luminance of QDLED by a factor of four compared to the control device without EBL, that is, to 18,671 cd/m2, with the current efficiency increased by an order of magnitude and the turn-on voltage decreased by ~1 V. At the same time, we have demonstrated that each particular QDLED characteristic has a maximum at a specific PMMA layer thickness; therefore, variation of the EBL deposition conditions could serve as an additional parameter space when other QDLED optimization approaches are being developed or implied in future solid-state lighting and display devices.

| S-EPMC8401809 | biostudies-literature

Double Metal Oxide Electron Transport Layers for Colloidal Quantum Dot Light-Emitting Diodes.

Project description:The performance of colloidal quantum dot light-emitting diodes (QD-LEDs) have been rapidly improved since metal oxide semiconductors were adopted for an electron transport layer (ETL). Among metal oxide semiconductors, zinc oxide (ZnO) has been the most generally employed for the ETL because of its excellent electron transport and injection properties. However, the ZnO ETL often yields charge imbalance in QD-LEDs, which results in undesirable device performance. Here, to address this issue, we introduce double metal oxide ETLs comprising ZnO and tin dioxide (SnO2) bilayer stacks. The employment of SnO2 for the second ETL significantly improves charge balance in the QD-LEDs by preventing spontaneous electron injection from the ZnO ETL and, as a result, we demonstrate 1.6 times higher luminescence efficiency in the QD-LEDs. This result suggests that the proposed double metal oxide ETLs can be a versatile platform for QD-based optoelectronic devices.

| S-EPMC7221608 | biostudies-literature

Effect of Air Exposure of ZnMgO Nanoparticle Electron Transport Layer on Efficiency of Quantum-Dot Light-Emitting Diodes.

Project description:We demonstrate the effect of air exposure on optical and electrical properties of ZnMgO nanoparticles (NPs) typically exploited as an electron transport layer in Cd-based quantum-dot light-emitting diodes (QLEDs). We analyze the roles of air components in modifying the electrical properties of ZnMgO NPs, which reveals that H2O enables the reduction of hole leakage while O2 alters the character of charge transport due to its ability to trap electrons. As a result, the charge balance in the QDs layer is improved, which is confirmed by voltage-dependent measurements of photoluminescence quantum yield. The maximum external quantum efficiency is improved over 2-fold and reaches the value of 9.5% at a luminance of 104 cd/m2. In addition, we investigate the problem of electron leakage into the hole transport layer and show that trap-mediated electron transport in the ZnMgO layer caused by adsorbed O2 ensures a higher leakage threshold. This work also provides an insight into the possible disadvantages of device contact with air as well as problems and challenges that might occur during open-air fabrication of QLEDs.

| S-EPMC8288913 | biostudies-literature

Stability of Quantum-Dot Light Emitting Diodes with Alkali Metal Carbonates Blending in Mg Doped ZnO Electron Transport Layer.

Project description:We report here the fabrication of highly efficient and long-lasting quantum-dot light emitting diodes (QLEDs) by blending various alkali metal carbonate in magnesium (Mg) doped zinc oxide (ZnO) (MZO) electron transport layer (ETL). Alkali metal carbonates blending in MZO, X2CO3:MZO, control the band-gap, electrical properties, and thermal stability. This can therefore enhance the operational lifetime of QLEDs. It is found that the conductivity of X2CO3:MZO film can be controlled and the thermal stability of ETLs could be improved by X2CO3 blending in MZO. The inverted red QLEDs (R-QLEDs) with Cs2CO3:MZO, Rb2CO3:MZO, and K2CO3:MZO ETLs exhibited the operational lifetime of 407 h for the R-QLEDs with Cs2CO3:MZO, 620 h with Rb2CO3:MZO and 94 h with K2CO3:MZO ETLs at T95 with the initial luminance of 1000 cd/m2. Note that all red QLEDs showed the high brightness over 150,000 cd/m2. But the R-QLEDs with Na2CO3:MZO and Li2CO3:MZO ETLs exhibited shorter operational lifetime and poor brightness than the R-QLED with pristine MZO ETL.

| S-EPMC7761844 | biostudies-literature

Quasi-Shell-Growth Strategy Achieves Stable and Efficient Green InP Quantum Dot Light-Emitting Diodes.

Project description:Indium phosphide (InP) based quantum dots (QDs) have been known as an ideal alternative to heavy metals including QDs light emitters, such as cadmium selenium (CdSe) QDs, and show great promise in the next-generation solid-state lighting and displays. However, the electroluminescence performance of green InP QDs is still inferior to their red counterparts, due to the higher density of surface defects and the wider particle size distribution. Here, a quasi-shell-growth strategy for the growth of highly luminescent green InP/ZnSe/ZnS QDs is reported, in which the zinc and selenium monomers are added at the initial nucleation of InP stage to adsorb on the surface of InP cores that create a quasi-ZnSe shell rather than a bulk ZnSe shell. The quasi-ZnSe shell reduces the surface defects of InP core by passivating In-terminated vacancies, and suppresses the Ostwald ripening of InP core at high temperatures, leading to a photoluminescence quantum yield of 91% with a narrow emission linewidth of 36 nm for the synthesized InP/ZnSe/ZnS QDs. Consequently, the light-emitting diodes based on the green QDs realize a maximum luminance of 15606 cd m-2 , a peak external quantum efficiency of 10.6%, and a long half lifetime of > 5000 h.

| S-EPMC9313472 | biostudies-literature

Inverted quantum dot light emitting diodes using polyethylenimine ethoxylated modified ZnO.

Project description:Colloidal quantum dots (QDs) are an emerging class of new materials due to their unique physical properties. In particular, colloidal QD based light emitting diodes (QDLEDs) have been extensively studied and developed for the next generation displays and solid-state lighting. Among a number of approaches to improve performance of the QDLEDs, the most practical one is optimization of charge transport and charge balance in the recombination region. Here, we suggest a polyethylenimine ethoxylated (PEIE) modified ZnO nanoparticles (NPs) as electron injection and transport layer for inverted structure red CdSe-ZnS based QDLED. The PEIE surface modifier, incorporated on the top of the ZnO NPs film, facilitates the enhancement of both electron injection into the CdSe-ZnS QD emissive layer by lowering the workfunction of ZnO from 3.58?eV to 2.87?eV and charge balance on the QD emitter. As a result, this device exhibits a low turn-on voltage of 2.0-2.5?V and has maximum luminance and current efficiency values of 8600?cd/m(2) and current efficiency of 1.53?cd/A, respectively. The same scheme with ZnO NPs/PEIE layer has also been used to successfully fabricate green, blue, and white QDLEDs.

| S-EPMC4354089 | biostudies-other

Quantum-Dot Light-Emitting Diodes with Nitrogen-Doped Carbon Nanodot Hole Transport and Electronic Energy Transfer Layer.

Project description:Electroluminescence efficiency is crucial for the application of quantum-dot light-emitting diodes (QD-LEDs) in practical devices. We demonstrate that nitrogen-doped carbon nanodot (N-CD) interlayer improves electrical and luminescent properties of QD-LEDs. The N-CDs were prepared by solution-based bottom up synthesis and were inserted as a hole transport layer (HTL) between other multilayer HTL heterojunction and the red-QD layer. The QD-LEDs with N-CD interlayer represented superior electrical rectification and electroluminescent efficiency than those without the N-CD interlayer. The insertion of N-CD layer was found to provoke the Förster resonance energy transfer (FRET) from N-CD to QD layer, as confirmed by time-integrated and -resolved photoluminescence spectroscopy. Moreover, hole-only devices (HODs) with N-CD interlayer presented high hole transport capability, and ultraviolet photoelectron spectroscopy also revealed that the N-CD interlayer reduced the highest hole barrier height. Thus, more balanced carrier injection with sufficient hole carrier transport feasibly lead to the superior electrical and electroluminescent properties of the QD-LEDs with N-CD interlayer. We further studied effect of N-CD interlayer thickness on electrical and luminescent performances for high-brightness QD-LEDs. The ability of the N-CD interlayer to improve both the electrical and luminescent characteristics of the QD-LEDs would be readily exploited as an emerging photoactive material for high-efficiency optoelectronic devices.

| S-EPMC5388879 | biostudies-literature

Color-Stable White Organic Light-Emitting Diodes Utilizing a Blue-Emitting Electron-Transport Layer.

Project description:We have fabricated efficient and color-stable white organic light-emitting diodes (WOLEDs) based on a simple double-layer device structure consisting of a blue-emitting oligoquinoline electron-transport layer and a poly(N-vinyl carbazole) layer doped with phosphorescent green and red iridium emitters. Pure white color with the CIE coordinates from (0.30, 0.31) to (0.34, 0.37) in the whole operating bias voltage range and luminous efficiency higher than 7 cd/A at a brightness up to 12?000 cd/m2 was achieved. These results demonstrate a new strategy to realizing easily processable, highly efficient, and color-stable WOLEDs with a simple structure.

| S-EPMC6645075 | biostudies-literature

Polymeric Hole Transport Materials for Red CsPbI3 Perovskite Quantum-Dot Light-Emitting Diodes.

Project description:In this study, the performances of red CsPbI3-based all-inorganic perovskite quantum-dot light-emitting diodes (IPQLEDs) employing polymeric crystalline Poly(3-hexylthiophene-2,5-diyl) (P3HT), poly(9-vinycarbazole) (PVK), Poly(N,N'-bis-4-butylphenyl-N,N'-bisphenyl)benzidine (Poly-TPD) and 9,9-Bis[4-[(4-ethenylphenyl)methoxy]phenyl]-N2,N7-di-1-naphthalenyl-N2,N7-diphenyl-9H-fluorene-2,7-diamine (VB-FNPD) as the hole transporting layers (HTLs) have been demonstrated. The purpose of this work is an attempt to promote the development of device structures and hole transporting materials for the CsPbI3-based IPQLEDs via a comparative study of different HTLs. A full-coverage quantum dot (QD) film without the aggregation can be obtained by coating it with VB-FNPD, and thus, the best external quantum efficiency (EQE) of 7.28% was achieved in the VB-FNPD device. We also reported a standing method to further improve the degree of VB-FNPD polymerization, resulting in the improved device performance, with the EQE of 8.64%.

| S-EPMC7999490 | biostudies-literature

Enhancing the performance of blue quantum-dot light-emitting diodes through the incorporation of polyethylene glycol to passivate ZnO as an electron transport layer.

Project description:The balance between charge transport and charge injection is always a key factor in enhancing the performance of quantum-dot light-emitting diodes (QD-LEDs), particularly for the blue QDs due to their large optical band gap and relatively low valence band level compared with their green and red counterparts. High performance blue QD-LEDs have been demonstrated by blending polyethylene glycol (PEG) into solution-processed ZnO nanocrystals as the electron transport layer. PEG can effectively tune the electron mobility of ZnO and simultaneously passivate its surface defect states. As a result, the maximum current efficiency (CE) and external quantum efficiency (EQE) of the blue QD-LEDs increased from 4.33 cd A-1 and 9.98% for pure ZnO to 8.03 cd A-1 and 14.84% for 4% PEG blended into ZnO, respectively. Furthermore, operational lifetime of the device is also significantly improved from 8.95 h to 25.06 h. This result indicates that PEG is a promising material for regulating the charge balance of the blue QD-LEDs.

| S-EPMC9054690 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data