Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Simultaneous Fe₃O₄ Nanoparticle Formation and Catalyst-Driven Hydrothermal Cellulose Degradation.

ABSTRACT: Breakdown and utilization of cellulose are critical for the bioenergy sector; however, current cellulose-to-energy conversion schemes often consume large quantities of unrecoverable chemicals, or are expensive, due to the need for enzymes or high temperatures. In this paper, we demonstrate a new method for converting cellulose into soluble compounds using a mixture of Fe²⁺ and Fe³⁺ as catalytic centers for the breakdown, yielding Fe₃O₄ nanoparticles during the hydrothermal process. Iron precursors transformed more than 61% of microcrystalline cellulose into solutes, with the composition of the solute changing with the initial Fe³⁺ concentration. The primary products of the breakdown of cellulose were a range of aldaric acids with different molecular weights. The nanoparticles have concentration-dependent tuneable sizes between 6.7 and 15.8 nm in diameter. The production of value-added nanomaterials at low temperatures improves upon the economics of traditional cellulose-to-energy conversion schemes with the precursor value increasing rather than deteriorating over time.

SUBMITTER: Wotton A

PROVIDER: S-EPMC8153760 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Hydrolysis of Cellulose by a Mesoporous Carbon-Fe₂(SO₄)₃/γ-Fe₂O₃ Nanoparticle-Based Solid Acid Catalyst.

Project description:Carbon-based solid acid catalysts have shown significant potential in a wide range of applications, and they have been successfully synthesized using simple processes. Magnetically separable mesoporous carbon composites also have enormous potential, especially in separation and adsorption technology. However, existing techniques have been unable to produce a magnetically separable mesoporous solid acid catalyst because no suitable precursors have been identified. Herein we describe a magnetically separable, mesoporous solid acid catalyst synthesized from a newly developed mesoporous carbon-γ-Fe2O3 nanoparticle composite. This material exhibits an equivalent acid density and catalytic activity in the hydrolysis of microcrystalline cellulose, to that of the cellulose-derived conventional catalyst. Since it is magnetically separable, this material can be readily recovered and reused, potentially reducing the environmental impact of industrial processes to which it is applied.

| S-EPMC4746576 | biostudies-literature

Bioethanol Production from Unpretreated Cellulose under Neutral Selfsustainable Hydrolysis/Hydrogenolysis Conditions Promoted by the Heterogeneous Pd/Fe3O4 Catalyst.

Project description:The direct conversion of untreated microcrystalline cellulose into C2-C3 alcohols, through a one-pot process promoted by the heterogeneous bimetallic Pd/Fe3O4 catalyst, is presented. The process is selfsustainable without the addition of external molecular hydrogen or acid/basic promoters and is mainly selective toward ethanol. At 240 °C, a complete cellulose conversion was reached after 12 h with an ethanol molar selectivity of 51% among liquid products. The synergistic effect played by water (which aids in the chemical pretreatment means of cellulose through the hydrolysis process) and the Pd/Fe3O4 catalyst (which catalyzes the hydrogenolysis reaction driving the pattern of obtained products) is elucidated.

| S-EPMC6648557 | biostudies-literature

Simultaneous in vivo PET/MRI using fluorine-18 labeled Fe3O4@Al(OH)3 nanoparticles: comparison of nanoparticle and nanoparticle-labeled stem cell distribution.

Project description:BackgroundMesenchymal stem cells (MSCs) have shown potential for treatment of different diseases. However, their working mechanism is still unknown. To elucidate this, the non-invasive and longitudinal tracking of MSCs would be beneficial. Both iron oxide-based nanoparticles (Fe3O4 NPs) for magnetic resonance imaging (MRI) and radiotracers for positron emission tomography (PET) have shown potential as in vivo cell imaging agents. However, they are limited by their negative contrast and lack of spatial information as well as short half-life, respectively. In this proof-of-principle study, we evaluated the potential of Fe3O4@Al(OH)3 NPs as dual PET/MRI contrast agents, as they allow stable binding of [18F]F- ions to the NPs and thus, NP visualization and quantification with both imaging modalities.Results18F-labeled Fe3O4@Al(OH)3 NPs (radiolabeled NPs) or mouse MSCs (mMSCs) labeled with these radiolabeled NPs were intravenously injected in healthy C57Bl/6 mice, and their biodistribution was studied using simultaneous PET/MRI acquisition. While liver uptake of radiolabeled NPs was seen with both PET and MRI, mMSCs uptake in the lungs could only be observed with PET. Even some initial loss of fluoride label did not impair NPs/mMSCs visualization. Furthermore, no negative effects on blood cell populations were seen after injection of either the NPs or mMSCs, indicating good biocompatibility.ConclusionWe present the application of novel 18F-labeled Fe3O4@Al(OH)3 NPs as safe cell tracking agents for simultaneous PET/MRI. Combining both modalities allows fast and easy NP and mMSC localization and quantification using PET at early time points, while MRI provides high-resolution, anatomic background information and long-term NP follow-up, hereby overcoming limitations of the individual imaging modalities.

| S-EPMC7326875 | biostudies-literature

Magnetic Activated-ATP@Fe3O4 Nanocomposite as an Efficient Fenton-Like Heterogeneous Catalyst for Degradation of Ethidium Bromide.

Project description:Magnetic attapulgite-Fe3O4 nanocomposites (ATP-Fe3O4) were prepared by coprecipitation of Fe3O4 on ATP. The composites were characterized by scanning electron microscopey, X-ray diffractometry, Brunauer-Emmett-Teller analysis, X-ray photoelectron spectroscopy, energy dispersive spectrometer and transmission electron microscopy. Surface characterization showed that Fe3O4 particles with an average size of approximately 15 nm were successfully embedded in matrix of ATP. The capacity of the Fe3O4-activated ATP (A-ATP@Fe3O4) composites for catalytic degradation of ethidium bromide (EtBr, 80 mg/L) at different pH values, hydrogen peroxide (H2O2) concentrations, temperatures, and catalyst dosages was investigated. EtBr degradation kinetics studies indicated that the pseudo-first-order kinetic constant was 2.445 min-1 at T = 323 K and pH 2.0 with 30 mM H2O2, and 1.5 g/L of A-ATP@Fe3O4. Moreover, a regeneration study suggested that A-ATP@Fe3O4 maintained over 80% of its maximal EtBr degradation ability after five successive cycles. The effects of the iron concentrations and free radical scavengers on EtBr degradation were studied to reveal possible catalytic mechanisms of the A-ATP@Fe3O4 nanocomposites. Electron Paramagnetic Resonance revealed both hydroxyl (∙OH) and superoxide anion (∙O2-) radicals were involved in EtBr degradation. Radical scavenging experiment suggested EtBr degradation was mainly ascribed to ∙OH radicals, which was generated by reaction between Fe2+ and H2O2 on the surface of A-ATP@Fe3O4.

| S-EPMC5519544 | biostudies-literature

Synthesis of a MnO2/Fe3O4/diatomite nanocomposite as an efficient heterogeneous Fenton-like catalyst for methylene blue degradation.

Project description:Heterogeneous Fenton-like catalysts with the activation of peroxymonosulfate (PMS), which offer the advantages of fast reaction rate, wide functional pH range and cost efficiency, have attracted great interest in wastewater treatment. In this study, a novel magnetic MnO2/Fe3O4/diatomite nanocomposite is synthesized and then used as heterogeneous Fenton-like catalyst to degrade the organic pollutant methylene blue (MB) with the activation of PMS. The characterization results show that the Fe3O4 nanoparticles and nanoflower-like MnO2 are evenly distributed layer-by-layer on the surface of diatomite, which can be readily magnetically separated from the solution. The as-prepared catalyst, compared with other Fenton-like catalysts, shows a superb MB degradation rate of nearly 100% in 45 min in the pH range of 4 to 8 and temperature range of 25 to 55 °C. Moreover, the nanocomposite shows a good mineralization rate of about 60% in 60 min and great recyclability with a recycle efficiency of 86.78% after five runs for MB. The probable mechanism of this catalytic system is also proposed as a synergistic effect between MnO2 and Fe3O4.

| S-EPMC6036966 | biostudies-literature

Effective Visible Light-Driven Photocatalytic Degradation of Ciprofloxacin over Flower-like Fe3O4/Bi2WO6 Composites.

Project description:Photocatalytic degradation of organic pollution is a vital path to deal with environmental problems. Here, a direct Z-scheme 2D/2D heterojunction of a Fe3O4/Bi2WO6 photocatalyst is fabricated for the degradation of ciprofloxacin by a self-assembly strategy. Furthermore, to characterize the morphology of the obtained composite photocatalysts, various kinds of characterization methods were employed like XRD, XPS, SEM, and TEM. It is indicated that the flower-like photocatalyst is composed of nanosheets. Comparable photocatalysts were prepared by controlling the hydrothermal temperature and the iron content. In the photocatalytic degradation of ciprofloxacin (CIP) in water, under visible light irradiation, FB-180 (synthesized at 180 °C with 4% iron content) presents approximately 99.7% degradation efficiency in only 15 min. Meanwhile, during photocatalytic degradation reactions, the Fe3O4/Bi2WO6 heterojunction also displayed excellent stability, which still kept above 90% degradation efficiency after five consecutive cycles. UV-Vis DRS and M-S analyses showed that the Fe3O4/Bi2WO6 catalyst has a strong visible light absorption capacity and the transfer pathway of photo-induced charge carriers. PL, EIS, and TPR showed that Fe3O4/Bi2WO6 has an efficient separation and transfer rate of the photo-generated carriers. ESR analysis proved that the superoxide radical (•O2 -) and hydroxyl radical (•OH) play a major role in the Fe3O4/Bi2WO6 photocatalytic system. This special 2D/2D heterojunction we proposed may have huge potential for marine pollution treatment by photocatalysis degradation with dramatically boosted activities.

| S-EPMC7818623 | biostudies-literature

Synthesis of 2-Nitro-2,3-Unsaturated Glycosides by a Nanomagnetic Catalyst Fe3O4@C@Fe(III).

Project description:A sustainable magnetic core-shell nanocatalyst Fe3O4@C@Fe(III) was successfully applied in the synthesis of a series of 2-nitro-2,3-unsaturated O-glycosides with excellent yields (up to 89%) and high stereoselectivity (α:β > 19:1). The substrate ranges are widely applicable, including different kinds of alcohols and even structurally complex acceptors. In addition, phenols could be applied in good yields. Moreover, the catalyst could be easily separated from the reaction by the application of an external magnetic force and reused a minimum of five times without any significant decrease in catalytic performance.

| S-EPMC9130751 | biostudies-literature

Selective Heterogeneous Fenton Degradation of Formaldehyde Using the Fe-ZSM-5 Catalyst

Project description: Not available

| S-EPMC11206745 | biostudies-literature

Iron and sulfide nanoparticle formation and transport in nascent hydrothermal vent plumes.

Project description:Deep-sea hydrothermal vents are a significant source of dissolved metals to the global oceans, producing midwater plumes enriched in metals that are transported thousands of kilometers from the vent source. Particle precipitation upon emission of hydrothermal fluids controls metal speciation and the magnitude of metal export. Here, we document metal sulfide particles, including pyrite nanoparticles, within the first meter of buoyant plumes from three high-temperature vents at the East Pacific Rise. We observe a zone of particle settling 10-20 cm from the orifice, indicated by stable sulfur isotopes; however, we also demonstrate that nanoparticulate pyrite (FeS2) is not removed from the plume and can account for over half of the filtered Fe (≤0.2 µm) up to one meter from the vent orifice. The persistence of nanoparticulate pyrite demonstrates that it is an important mechanism for near-vent Fe stabilisation and highlights the potential role of nanoparticles in element transport.

| S-EPMC6453976 | biostudies-literature

Selective assembly of Au-Fe3O4 nanoparticle hetero-dimers.

Project description:Hetero-dimeric magnetic nanoparticles of the type Au-Fe3O4 have been synthesised from separately prepared, differently shaped (spheres and cubes), monodisperse nanoparticles. This synthesis was achieved by the following steps: (a) Mono-functionalising each type of nanoparticles with aldehyde functional groups through a solid support approach, where nanoparticle decorated silica nanoparticles were fabricated as an intermediate step; (b) Derivatising the functional faces with complementary functionalities (e.g. amines and carboxylic acids); (c) Dimerising the two types of particles via amide bond formation. The resulting hetero-dimers were characterised by high-resolution TEM, Fourier transform IR spectroscopy and other appropriate methods. Graphical AbstractNano-LEGO: Assembling two types of separately prepared nanoparticles into a hetero-dimer is the first step towards complex nano-architectures. This study shows a solid support approach to combine a gold and a magnetite nanocrystal.

| S-EPMC4569660 | biostudies-literature