Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhancing the Catalytic Performance of NiO during the Transesterification of Waste Cooking Oil Using a Diatomite Carrier and an Integrated Ni⁰ Metal: Response Surface Studies.

ABSTRACT: Two types of NiO-based composites (NiO@diatomite and Ni/NiO@diatomite) were synthesized as modified products of enhanced catalytic performances during the transesterification reactions of waste cooking oil. The influence of the diatomite substrate and the integration of metallic Ni⁰ in inducing the catalytic activity were evaluated in a series of transesterification reactions. The experimental conditions were adjusted according to the response surface methodology and the central composite statistical design. Experimentally, the diatomite substrate and the Ni⁰ metal induced the efficiency of the reaction to achieve a yield of 73.4% (NiO@diatomite) and 91% (Ni/NiO@diatomite), respectively, as compared to 66% for the pure phase (NiO). This was obtained under experimental conditions of 80 °C temperature, 100 min time, 12:1 methanol/oil molar ratio, and 3.75 wt % loading. The theoretical optimization functions of the designs suggested enhancement to the experimental conditions to achieve a yield of 76.3% by NiO@diatomite and 93.2% by Ni/NiO@diatomite. This reflected the role of the diatomite substrate in enhancing the surface area, the adsorption of fatty acids, and the exposure of the catalytic sites in addition to the effect of the Ni⁰ metal in enhancing the catalytic reactivity of the final product. Finally, the biodiesel produced over Ni/NiO@diatomite as the best product was of acceptable properties according to the international standards.

SUBMITTER: Bin Jumah MN

PROVIDER: S-EPMC8154151 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Co-transesterification of waste cooking oil, algal oil and dimethyl carbonate over sustainable nanoparticle catalysts.

Project description:Key challenges for the application of biodiesel include their high acid value, high viscosity, and low ester content. It is essential to develop later-generation biodiesel from unexploited non-food resources for a more sustainable future. Reuse of biowaste is critically important to address these issues of food safety and sustainability. Thus, the co-transesterification of waste cooking oil (WCO), algal oil (AO) and dimethyl carbonate (DMC) for the synthesis of fatty acid methyl esters (FAMEs) was investigated over a series of nanoparticle catalysts containing calcium, magnesium, potassium or nickel under mild reaction conditions. Nanoparticle catalyst samples were prepared from biowaste sources of chicken manure (CM), water hyacinth (WH) and algal bloom (AB), and characterized using XRD, Raman and FESEM techniques for the heterogeneous production of biodiesel. The catalyst was initially prepared by calcination at 850 °C for 4 h in a major presence of CaxMgyCO3, KCl and K2CO3. The WCO and AO co-conversion of 98% and FAMEs co-selectivity of 95% were obtained over CM nanoparticle catalyst under the reaction conditions of 80 °C, 20 mins and DMC to oil molar ratio of 6:1 with 3% catalyst loading and 3% methanol addition. Under the optimum condition, the density, viscosity, and cetane number of the biodiesel were in the range of diesel standards. Nanoparticle catalysts have been proven as a promising sustainable material in the catalytic transesterification of WCO and AO with the major presence of calcium, magnesium and potassium. This study highlights a sustainable approach via biowaste utilization for the enhancement of biodiesel quality with high ester content, low acid value, high cetane number, and low viscosity.

| S-EPMC7494454 | biostudies-literature

Reversible metathesis of ammonia in an acyclic germylene-Ni0 complex.

Project description:Carbenes, a class of low-valent group 14 ligand, have shifted the paradigm in our understanding of the effects of supporting ligands in transition-metal reactivity and catalysis. We now seek to move towards utilizing the heavier group 14 elements in effective ligand systems, which can potentially surpass carbon in their ability to operate via 'non-innocent' bond activation processes. Herein we describe our initial results towards the development of scalable acyclic chelating germylene ligands (viz. 1a/b), and their utilization in the stabilization of Ni0 complexes (viz. 4a/b), which can readily and reversibly undergo metathesis with ammonia with no net change of oxidation state at the GeII and Ni0 centres, through ammonia bonding at the germylene ligand as opposed to the Ni0 centre. The DFT-derived metathesis mechanism, which surprisingly demonstrates the need for three molecules of ammonia to achieve N-H bond activation, supports reversible ammonia binding at GeII, as well as the observed reversibility in the overall reaction.

| S-EPMC8179610 | biostudies-literature

Thermodynamic Modulation of Dihydrogen Activation Through Rational Ligand Design in GeII-Ni0 Complexes.

Project description:A family of chelating aryl-functionalized germylene ligands has been developed and employed in the synthesis of their corresponding 16-electron Ni0 complexes (PhiPDippGeAr·Ni·IPr; PhiPDipp = {[Ph2PCH2Si(iPr)2](Dipp)N}-; IPr = [{(H)CN(Dipp)}2C:]; Dipp = 2,6-iPr2C6H3). These complexes demonstrate the ability to cooperatively and reversibly activate dihydrogen at the germylene-nickel interface under mild conditions (1.5 atm H2, 298 K). We show that the thermodynamics of the dihydrogen activation process can be modulated by tuning the electronic nature of the germylene ligands, with an increase in the electron-withdrawing character displaying more exergonic ΔG298 values, as ascertained through NMR spectroscopic Van't Hoff analyses for all systems. This is also shown to correlate with experimental 31P NMR and UV/vis absorption data as well as with computationally derived parameters such as Ge-Ni bond order and Ni/Ge NPA charge, giving a thorough understanding of the modulating effect of ligand design on this reversible, cooperative bond activation reaction. Finally, the utility of this modulation was demonstrated in the catalytic dehydrocoupling of phenylsilane, whereby systems that disfavor dihydrogen activation are more efficient catalysts, aligning with H2-elimination being the rate-limiting step. A density functional theory analysis supports cooperative activation of the Si-H moiety in PhSiH3.

| S-EPMC11345810 | biostudies-literature

Ni(0)-promoted activation of Csp2 -H and Csp2 -O bonds.

Project description:A dinickel(0)-N2 complex, stabilized with a rigid acridane-based PNP pincer ligand, was studied for its ability to activate C(sp2)-H and C(sp2)-O bonds. Stabilized by a Ni-μ-N2-Na+ interaction, it activates C-H bonds of unfunctionalized arenes, affording nickel-aryl and nickel-hydride products. Concomitantly, two sodium cations get reduced to Na(0), which was identified and quantified by several methods. Our experimental results, including product analysis and kinetic measurements, strongly suggest that this C(sp2)-H activation does not follow the typical oxidative addition mechanism occurring at a low-valent single metal centre. Instead, via a bimolecular pathway, two powerfully reducing nickel ions cooperatively activate an arene C-H bond and concomitantly reduce two Lewis acidic alkali metals under ambient conditions. As a novel synthetic protocol, nickel(ii)-aryl species were directly synthesized from nickel(ii) precursors in benzene or toluene with excess Na under ambient conditions. Furthermore, when the dinickel(0)-N2 complex is accessed via reduction of the nickel(ii)-phenyl species, the resulting phenyl anion deprotonates a C-H bond of glyme or 15-crown-5 leading to C-O bond cleavage, which produces vinyl ether. The dinickel(0)-N2 species then cleaves the C(sp2)-O bond of vinyl ether to produce a nickel(ii)-vinyl complex. These results may provide a new strategy for the activation of C-H and C-O bonds mediated by a low valent nickel ion supported by a structurally rigidified ligand scaffold.

| S-EPMC8317657 | biostudies-literature

Composite Ni/NiO-Cr2O3 Catalyst for Alkaline Hydrogen Evolution Reaction.

Project description:We report a Ni-Cr/C electrocatalyst with unprecedented mass-activity for the hydrogen evolution reaction (HER) in alkaline electrolyte. The HER kinetics of numerous binary and ternary Ni-alloys and composite Ni/metal-oxide/C samples were evaluated in aqueous 0.1 M KOH electrolyte. The highest HER mass-activity was observed for Ni-Cr materials which exhibit metallic Ni as well as NiO x and Cr2O3 phases as determined by X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) analysis. The onset of the HER is significantly improved compared to numerous binary and ternary Ni-alloys, including Ni-Mo materials. It is likely that at adjacent Ni/NiO x sites, the oxide acts as a sink for OHads, while the metallic Ni acts as a sink for the Hads intermediate of the HER, thus minimizing the high activation energy of hydrogen evolution via water reduction. This is confirmed by in situ XAS studies that show that the synergistic HER enhancement is due to NiO x content and that the Cr2O3 appears to stabilize the composite NiO x component under HER conditions (where NiO x would typically be reduced to metallic Ni0). Furthermore, in contrast to Pt, the Ni(O x )/Cr2O3 catalyst appears resistant to poisoning by the anion exchange ionomer (AEI), a serious consideration when applied to an anionic polymer electrolyte interface. Furthermore, we report a detailed model of the double layer interface which helps explain the observed ensemble effect in the presence of AEI.

| S-EPMC4501498 | biostudies-literature

Bioremediation of cooking oil waste using lipases from wastes.

Project description:Cooking oil waste leads to well-known environmental impacts and its bioremediation by lipase-based enzymatic activity can minimize the high cytotoxic potential. In addition, they are among the biocatalysts most commercialized worldwide due to the versatility of reactions and substrates. However, although lipases are able to process cooking oil wastes, the products generated from this process do not necessarily become less toxic. Thus, the aim of the current study is to analyze the bioremediation of lipase-catalyzed cooking oil wastes, as well as their effect on the cytotoxicity of both the oil and its waste before and after enzymatic treatment. Thus, assessed the post-frying modification in soybean oil and in its waste, which was caused by hydrolysis reaction catalyzed by commercial and home-made lipases. The presence of lipases in the extracts obtained from orange wastes was identified by zymography. The profile of the fatty acid esters formed after these reactions was detected and quantified through gas chromatography and fatty acids profile compared through multivariate statistical analyses. Finally, the soybean oil and its waste, with and without enzymatic treatment, were assessed for toxicity in cytotoxicity assays conducted in vitro using fibroblast cell culture. The soybean oil wastes treated with core and frit lipases through transesterification reaction were less toxic than the untreated oils, thus confirming that cooking oil wastes can be bioremediated using orange lipases.

| S-EPMC5657992 | biostudies-literature

Two-Step Synthesis of Heptacyclo[6.6.0.02,6 .03,13 .04,11 .05,9 .010,14 ] tetradecane from Norbornadiene: Mechanism of the Cage Assembly and Post-synthetic Functionalization.

Project description:A selective and scalable two-step approach to the dimerization of norbornadiene (NBD) into its thermodynamically most stable dimer, heptacyclo[6.6.0.02,6 .03,13 .04,11 .05,9 .010,14 ] tetradecane, (HCTD) is reported. Calculations indicate that the reaction starts with the Rh-catalyzed stepwise homo Diels-Alder cyclisation of NBD into its exo-cis-endo dimer. Treatment of this compound with acid promotes its evolution to HCTD via a [1,2]-sigmatropic rearrangement. The assemblies of 7,12-disubstituted cages from 7-(alkyl/aryl) NBDs, as well as the selective post-synthetic C-H functionalization of the core HCTD scaffold at position C1, or positions C1 and C4 are described.

| S-EPMC7756769 | biostudies-literature

A Waste-Minimized Approach to Cassar-Heck Reaction Based on POLITAG-Pd0 Heterogeneous Catalyst and Recoverable Acetonitrile Azeotrope.

Project description:Three different Pd0 -based heterogeneous catalysts were developed and tested in the Cassar-Heck reaction (i. e., copper-free Sonogashira reaction) aiming at the definition of a waste minimized protocol. The cross-linked polymeric supports used in this investigation were designed to be adequate for different reaction media and were decorated with different pincer-type ionic ligands having the role of stabilizing the formation and dimension of palladium nanoparticles. Among the ionic tags tested, bis-imidazolium showed the best performances in terms of efficiency and durability of the metal catalytic system. Eventually, aqueous acetonitrile azeotrope was selected as the reaction medium as it allowed the best catalytic efficiency combined with easy recovery and reuse. Finally, the synergy between the selected catalyst and reaction medium allowed to obtain highly satisfactory isolated yields of a variety of substrates while using a low amount of metal catalyst. The high performance of the designed POLymeric Ionic TAG (POLITAG)-Pd0 , along with its good selectivity achieved in a copper-free process, also led to a simplified purification procedure allowing the minimization of the waste generated as also proven by the very low E-factor values (1.4-5) associated.

| S-EPMC8457221 | biostudies-literature

Magneto-structural Correlations in Ni2+-Halide···Halide-Ni2+ Chains.

Project description:We present the magnetic properties of a new family of S = 1 molecule-based magnets, NiF2(3,5-lut)4·2H2O and NiX2(3,5-lut)4, where X = HF2, Cl, Br, or I (lut = lutidine C7H9N). Upon creation of isolated Ni-X···X-Ni and Ni-F-H-F···F-H-F-Ni chains separated by bulky and nonbridging lutidine ligands, the effect that halogen substitution has on the magnetic properties of transition-metal-ion complexes can be investigated directly and in isolation from competing processes such as Jahn-Teller distortions. We find that substitution of the larger halide ions turns on increasingly strong antiferromagnetic interactions between adjacent Ni2+ ions via a novel through-space two-halide exchange. In this process, the X···X bond lengths in the Br and I materials are more than double the van der Waals radius of X yet can still mediate significant magnetic interactions. We also find that a simple model based on elongation/compression of the Ni2+ octahedra cannot explain the observed single-ion anisotropy in mixed-ligand compounds. We offer an alternative that takes into account the difference in the electronegativity of axial and equatorial ligands.

| S-EPMC8753652 | biostudies-literature

Oxidative Dehydrogenation of Ethane: Superior Nb2O5-NiO/Ni-Foam Catalyst Tailored by Tuning Morphology of NiO-Precursors Grown on a Ni-Foam.

Project description:Large-scale shale gas exploitation greatly enriches ethane resources, making the oxidative dehydrogenation of ethane to ethylene quite fascinating, but the qualified catalyst with unique combination of enhanced activity/selectivity, enhanced heat transfer, and low pressure drop presents a grand challenge. Herein, a high-performance Nb2O5-NiO/Ni-foam catalyst engineered from nano- to macroscale for this reaction is tailored by finely tuning the performance-relevant Nb2O5-NiO interaction that is strongly dependent on NiO-precursor morphology. Three NiO-precursors of different morphologies (clump, rod, and nanosheet) were directly grown onto Ni-foam followed by Nb2O5 modification to obtain the catalyst products. Notably, the one from the NiO-precursor of nanosheet achieves the highest ethylene yield, in nature, because of markedly diminished unselective oxygen species due to enhanced interaction between Nb2O5 and NiO nanosheet. An advanced catalyst is developed by further thinning the NiO-precursor nanosheet, which achieves 60% conversion with 80% selectivity and is stable for at least 240 h.

| S-EPMC6833484 | biostudies-literature