Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Waste-Minimized Approach to Cassar-Heck Reaction Based on POLITAG-Pd⁰ Heterogeneous Catalyst and Recoverable Acetonitrile Azeotrope.

ABSTRACT: Three different Pd⁰ -based heterogeneous catalysts were developed and tested in the Cassar-Heck reaction (i. e., copper-free Sonogashira reaction) aiming at the definition of a waste minimized protocol. The cross-linked polymeric supports used in this investigation were designed to be adequate for different reaction media and were decorated with different pincer-type ionic ligands having the role of stabilizing the formation and dimension of palladium nanoparticles. Among the ionic tags tested, bis-imidazolium showed the best performances in terms of efficiency and durability of the metal catalytic system. Eventually, aqueous acetonitrile azeotrope was selected as the reaction medium as it allowed the best catalytic efficiency combined with easy recovery and reuse. Finally, the synergy between the selected catalyst and reaction medium allowed to obtain highly satisfactory isolated yields of a variety of substrates while using a low amount of metal catalyst. The high performance of the designed POLymeric Ionic TAG (POLITAG)-Pd⁰ , along with its good selectivity achieved in a copper-free process, also led to a simplified purification procedure allowing the minimization of the waste generated as also proven by the very low E-factor values (1.4-5) associated.

SUBMITTER: Valentini F

PROVIDER: S-EPMC8457221 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultra-Small Pd(0) Nanoparticles into a Designed Semisynthetic Lipase: An Efficient and Recyclable Heterogeneous Biohybrid Catalyst for the Heck Reaction under Mild Conditions.

Project description:A novel heterogeneous enzyme-palladium (Pd) (0) nanoparticles (PdNPs) bionanohybrid has been synthesized by an efficient, green, and straightforward methodology. A designed Geobacillus thermocatenulatus lipase (GTL) variant genetically and then chemically modified by the introduction of a tailor-made cysteine-containing complementary peptide- was used as the stabilizing and reducing agent for the in situ formation of ultra-small PdNPs nanoparticles embedded on the protein structure. This bionanohybrid was an excellent catalyst in the synthesis of trans-ethyl cinnamate by Heck reaction at 65 °C. It showed the best catalytic performance in dimethylformamide (DMF) containing 10⁻25% of water as a solvent but was also able to catalyze the reaction in pure DMF or with a higher amount of water as co-solvent. The recyclability and stability were excellent, maintaining more than 90% of catalytic activity after five cycles of use.

| S-EPMC6225421 | biostudies-literature

Glycolysis of Poly(Ethylene Terephthalate) Using Biomass-Waste Derived Recyclable Heterogeneous Catalyst.

Project description:Plastic production has increased by almost 200-fold annually from 2 million metric tons per year in 1950s to 359 million metric tons in 2018. With this rapidly increasing production, plastic pollution has become one of the most demanding environmental issues and tremendous efforts have been initiated by the research community for its disposal. In this present study, we reported for the first time, a biomass-waste-derived heterogeneous catalyst prepared from waste orange peel for the depolymerisation of poly(ethylene terephthalate) (PET) to its monomer, bis(2-hydroxyethyl terephthalate) (BHET). The prepared orange peel ash (OPA) catalyst was well-characterised using techniques such as IR, inductively coupled plasma (ICP)-OES (Optical Emission Spectrometry), XRD, X-ray fluorescence (XRF), SEM, energy-dispersive X-ray spectroscopy (EDX), TEM, BET (Brunauer-Emmett-Teller) and TGA. The catalyst was found to be composed of basic sites, high surface area, and a notable type-IV N2 adsorption-desorption isotherm indicating the mesoporous nature of the catalyst, which might have eventually enhanced the rate of the reaction as well as the yield of the product. The catalyst completely depolymerises PET within 90 min, producing 79% of recrystallised BHET. The ability of reusing the catalysts for 5 consecutive runs without significant depreciation in the catalytic activity and its eco- and environmental-friendliness endorses this protocol as a greener route for PET recycling.

| S-EPMC7794874 | biostudies-literature

(Acetonitrile-?N)penta-carbonyl-tungsten(0).

Project description:The acetonitrile ligand in the title compound, [W(CH(3)CN)(CO)(5)], is coordinated end-on to a penta-carbonyl-tungsten(0) fragment with a W-N bond length of 2.186?(4)?Å, completing an octa-hedral coordination environment around the W atom.

| S-EPMC3120401 | biostudies-literature

Polyionic polymers--heterogeneous media for metal nanoparticles as catalyst in Suzuki-Miyaura and Heck-Mizoroki reactions under flow conditions.

Project description:The preparation of monolithic polyionic supports which serve as efficient heterogeneous supports for palladium(0) nanoparticles is described. These functionalized polymers were incorporated inside a flow reactor and employed in Suzuki-Miyaura and Heck cross couplings under continuous flow conditions.

| S-EPMC2707061 | biostudies-literature

Supported Cu<sup>0</sup> nanoparticles catalyst for controlled radical polymerization reaction and block-copolymer synthesis.

Project description:The synthesis of Cu0 nanoparticles on different supports and their activity in controlled living radical polymerization processes is presented. The type of support influences the final size of the copper nanoparticles as well as their adhesion to the support. These aspects have a direct influence on the characteristics of the polymers obtained. The best results were obtained for SiO2 particles, which afforded a good molecular weight distribution (Mw/Mn?=?1.25). The activity, recovery and recycling of the catalyst was explored for ultrafast polymerization reaction of butyl acrylate. Further, the terminal bromine reactivity was used for the synthesis of a block poly(n butyl acrylate-block-styrene). The influence of ligand type on the control of the reaction was studied. Also, a straightforward polymerization procedure without any ligand afforded a polydispersity value of 1.38.

| S-EPMC5583343 | biostudies-literature

Graphene Oxide Foam Supported Titanium(IV): Recoverable Heterogeneous Catalyst for Efficient, Selective Oxidation of Arylalkyl Sulfides to Sulfoxides Under Mild Conditions.

Project description:An efficient and environmentally friendly method was designed for the oxidation of sulfides to sulfoxides with a recyclable, carbon-skeleton-based heterogeneous catalyst developed by titanium sulfate [Ti(SO4)2] mineralization on the surface of graphene oxide foam [Ti(SO4)2@GOF] by using 30 wt% H2O2 as oxidant. Several different substituted sulfides were examined to explore the scope of substrates of the selective oxidation. The excellent reusability and durability of Ti(SO4)2@GOF was demonstrated by recycling experiments and the catalyst was further applied in the preparation of pantoprazole sodium in a one-pot process.

| S-EPMC5543132 | biostudies-literature

POLITAG-M-F as Heterogeneous Organocatalyst for the Waste-Minimized Synthesis of β-Azido Carbonyl Compounds in Batch and under Flow Conditions.

Project description:We herein report a waste minimization protocol for the β-azidation of α,β-unsaturated carbonyl compounds using TMSN3. The selection of the appropriate catalyst (POLITAG-M-F), in combination with the reaction medium, resulted in enhanced catalytic efficiency and a low environmental footprint. The thermal and mechanical stability of the polymeric support allowed us to recover the POLITAG-M-F catalyst for up to 10 consecutive runs. The CH3CN:H2O azeotrope has a 2-fold positive effect on the process, increasing the efficiency of the protocol and minimizing waste generation. Indeed, the azeotropic mixture, used as a reaction medium and for the workup procedure, was recovered by distillation, leading to an easy and environmentally friendly procedure for product isolation in high yield and with a low E-factor. A comprehensive evaluation of the environmental profile was performed by the calculation of different green metrics (AE, RME, MRP, 1/SF) and a comparison with other literature available protocols. A flow protocol was defined to scale-up the process, and up to 65 mmol of substrates were efficiently converted with a productivity of 0.3 mmol/min.

| S-EPMC9945162 | biostudies-literature

Encaging palladium(0) in layered double hydroxide: A sustainable catalyst for solvent-free and ligand-free Heck reaction in a ball mill.

Project description:In this paper, the synthesis of a cheap, reusable and ligand-free Pd catalyst supported on MgAl layered double hydroxides (Pd/MgAl-LDHs) by co-precipitation and reduction methods is described. The catalyst was used in Heck reactions under high-speed ball milling (HSBM) conditions at room temperature. The effects of milling-ball size, milling-ball filling degree, reaction time, rotation speed and grinding auxiliary category, which would influence the yields of mechanochemical Heck reactions, were investigated in detail. The characterization results of XRD, ICP-MS and XPS suggest that Pd/MgAl-LDHs have excellent textural properties with zero-valence Pd on its layers. The reaction results indicate that the catalyst could be utilized in HSBM systems to afford a wide range of Heck coupling products in satisfactory yields. Furthermore, this catalyst could be easily recovered and reused for at least ?ve times without signi?cant loss of catalytic activity.

| S-EPMC5564263 | biostudies-literature

Plastic Waste Conversion over a Refinery Waste Catalyst.

Project description:Polypropylene (PP) makes up a large share of our plastic waste. We investigated the conversion of PP over the industrial Fluid Catalytic Cracking catalyst (FCC-cat) used to produce gasoline from crude oil fractions. We studied transport limitations arising from the larger size of polymers compared to the crude oil-based feedstock by testing the components of this catalyst separately. Infrared spectroscopy and confocal fluorescence microscopy revealed the role of the FCC matrix in aromatization, and the zeolite Y domains in coking. An equilibrium catalyst (ECAT), discarded during FCC operation as waste, produced the same aromatics content as a fresh FCC-cat, while coking decreased significantly, likely due to the reduced accessibility and activity of the zeolite domains and an enhanced cracking activity of the matrix due to metal deposits present in ECAT. This mechanistic understanding provides handles for further improving the catalyst composition towards higher aromatics selectivity.

| S-EPMC8362022 | biostudies-literature

Levulinic Acid Production from Waste Corncob Biomass Using an Environmentally Benign WO3-Grafted ZnCo2O4@CeO2 Bifunctional Heterogeneous Catalyst

Project description:Herein, a novel and

| S-EPMC9835630 | biostudies-literature