Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation of Polymer-Immobilized Polyimide Films Using Hot Pressing and Titania Coatings.

ABSTRACT: Recent studies have revealed that polymer molecules at film surfaces exhibit unique physical properties compared to those in bulk. On the other hand, such a topic has not been extensively focused for the cases of rigid polymers such as polyimide (PI). This study investigated whether hot pressing could induce the immobilization of other polymers, poly(4-vinylphenol) (PVP), on PI film surfaces. Results supported the immobilization of PVP on the PI film surfaces, and the increase of hot-press temperature resulted in the increase of the immobilization amount of PVP. The mechanism of immobilization is discussed considering the effects of hot pressing on the interactions between PVP and PI at the interfaces of their films. Sol-gel titania coatings were further conducted to the obtained PVP-immobilized PI films. The effect of PVP immobilization on formability and the adhesion of titania layers on the film surfaces were evaluated. These results demonstrate that hot pressing of other polymers is a useful approach for the surface modification of PI films, particularly introducing certain functional groups, and indicate that the polymer immobilization mechanism might be correlated with the surface physical properties of PI films.

SUBMITTER: Hashizume M

PROVIDER: S-EPMC8154877 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Preparation of Network-Structured Carbon Nanofiber Mats Based on PAN Blends Using Electrospinning and Hot-Pressing Methods for Supercapacitor Applications.

Project description:In this work, we prepared network-structured carbon nanofibers using polyacrylonitrile blends (PAN150 and PAN85) with different molecular weights (150,000 and 85,000 g mol-1) as precursors through electrospinning/hot-pressing methods and stabilization/carbonization processes. The obtained PAN150/PAN85 polymer nanofibers (PNFs; PNF-73, PNF-64 and PNF-55) with different weight ratios of 70/30, 60/40 and 50/50 (w/w) provided good mechanical and electrochemical properties due to the formation of physically bonded network structures between the blended PAN nanofibers during the hot-processing/stabilization processes. The resulting carbonized PNFs (cPNFs; cPNF-73, cPNF-64, and cPNF-55) were utilized as anode materials for supercapacitor applications. cPNF-73 exhibited a good specific capacitance of 689 F g-1 at 1 A g-1 in a three-electrode set-up compared to cPNF-64 (588 F g-1 at 1 A g-1) and cPNF-55 (343 F g-1 at 1 A g-1). In addition, an asymmetric hybrid cPNF-73//NiCo2O4 supercapacitor device also showed a good specific capacitance of 428 F g-1 at 1 A g-1 compared to cPNF-64 (400 F g-1 at 1 A g-1) and cPNF-55 (315 F g-1 at 1 A g-1). The cPNF-73-based device showed a good energy density of 1.74 W h kg-1 (0.38 W kg-1) as well as an excellent cyclic stability (83%) even after 2000 continuous charge-discharge cycles at a current density of 2 A g-1.

| S-EPMC8467548 | biostudies-literature

Conducting polymer-based multilayer films for instructive biomaterial coatings.

Project description:To demonstrate the design, fabrication and testing of conformable conducting biomaterials that encourage cell alignment.Thin conducting composite biomaterials based on multilayer films of poly(3.4-ethylenedioxythiophene) derivatives, chitosan and gelatin were prepared in a layer-by-layer fashion. Fibroblasts were observed with fluorescence microscopy and their alignment (relative to the dipping direction and direction of electrical current passed through the films) was determined using ImageJ.Fibroblasts adhered to and proliferated on the films. Fibroblasts aligned with the dipping direction used during film preparation and this was enhanced by a DC current.We report the preparation of conducting polymer-based films that enhance the alignment of fibroblasts on their surface which is an important feature of a variety of tissues.

| S-EPMC5137882 | biostudies-other

Preparation of Ni nanoparticles by liquid-phase reduction to fabricate metal nanoparticle-polyimide composite films.

Project description:Nickel-nanoparticle-containing polyimide composite films were prepared by liquid-phase reduction of Ni2+ ions with potassium borohydride (KBH4). The nanoparticles were amorphous with diameters of approximately 10-20 nm, depending on the KBH4 concentration and reduction temperature. At high KBH4 concentrations, the nanoparticles appeared to contain various nickel boride species. The number of nanoparticles and Ni content both increased upon repeated adsorption/reduction of Ni2+ ions, where the particle growth was inhibited by the rigid polymer chain and the formation of smaller particles was favored.

| S-EPMC9060965 | biostudies-literature

Adhesion and Stability of Nanocellulose Coatings on Flat Polymer Films and Textiles.

Project description:Renewable nanocellulose materials received increased attention owing to their small dimensions, high specific surface area, high mechanical characteristics, biocompatibility, and compostability. Nanocellulose coatings are among many interesting applications of these materials to functionalize different by composition and structure surfaces, including plastics, polymer coatings, and textiles with broader applications from food packaging to smart textiles. Variations in porosity and thickness of nanocellulose coatings are used to adjust a load of functional molecules and particles into the coatings, their permeability, and filtration properties. Mechanical stability of nanocellulose coatings in a wet and dry state are critical characteristics for many applications. In this work, nanofibrillated and nanocrystalline cellulose coatings deposited on the surface of polymer films and textiles made of cellulose, polyester, and nylon are studied using atomic force microscopy, ellipsometry, and T-peel adhesion tests. Methods to improve coatings' adhesion and stability using physical and chemical cross-linking with added polymers and polycarboxylic acids are analyzed in this study. The paper reports on the effect of the substrate structure and ability of nanocellulose particles to intercalate into the substrate on the coating adhesion.

| S-EPMC7397189 | biostudies-literature

Hot Oscillatory Pressing of Carbon Nanotube-Reinforced Copper Matrix Nanocomposite.

Project description:Carbon nanotube reinforced copper matrix nanocomposites have great potential in machinery, microelectronics, and other applications. The materials are usually prepared by powder metallurgy processes, in which consolidation is a key step for high performance. To improve the density and mechanical properties, the authors explored the use of hot oscillatory pressing (HOP) to prepare this material. A carbon nanotube reinforced copper matrix nanocomposite was synthesized by both HOP and hot pressing (HP) at various temperatures, respectively. The samples prepared by HOP exhibited significantly higher density and hardness than those prepared by HP at the same temperature, and this was because the oscillatory pressure of HOP produced remarkable plastic deformation in copper matrix during sintering. With the decrease of sintering temperature in HOP, the amount of deformation defect increased gradually, playing a key role in the increasing hardness. This work proves experimentally for the first time that HOP can produce much more plastic deformation than HP to promote densification, and that HOP could be a very promising technique for preparing high-performance carbon nanotube reinforced copper matrix nanocomposites.

| S-EPMC8471937 | biostudies-literature

Preparation of large-area ultrathin carbon semiconductors converted from conjugated microporous polymer films.

Project description:Two-dimensional carbon semiconductors have aroused great attention due to their unique structures and novel properties, showing potential applications in emerging electronic and optoelectronic devices. In this work, we reported an effective strategy to controllable prepare ultrathin carbon nanofilms (CNFs) by combining in situ-growth and stepwise thermal annealing, with the features of large-area, tunable properties and nanoscale thickness. The structures, morphologies and electrical properties of these as-prepared CNFs were characterized systematically. Impressively, tunable electrical properties from low to semi- and high conductivity could be precisely achieved through stepwise annealing of conjugated microporous polymer films. By introducing CNF-750 as the active channel layer, the transistor exhibited a typical p-type semiconductor property. Moreover, by further coupling CNF-750 with carbon dots (CDs) as a photoresponse layer, the as-fabricated all-carbon diode based on CDs/CNF-750 heterostructure film showed high ultraviolet (UV) light response.

| S-EPMC9064592 | biostudies-literature

Transparent Self-Cleaning Coatings Based on Colorless Polyimide/Silica Sol Nanocomposite.

Project description:We herein report transparent self-cleaning coatings based on polyimide-fluorinated silica sol (PIFSS) nanocomposite. Polyamic acid-silica sol (PASS) suspensions were synthesized by adding four different amounts of a silica sol suspension to each end-capped polyamic acid solution. The PASS suspensions were spin-coated on glass slides, thermally imidized and treated with triethoxy-1H,1H,2H,2H-perfluorodecylsilane (TEFDS) to prepare PIFSS coatings. The PIFSS coatings showed high resistance to separation from glass substrates and thermal stability. Furthermore, the PIFSS coatings on the glass substrate could be cleanly removed using polar aprotic solvents and repeated coating was possible. As the amount of silica sol particles in the PIFSS coating was increased, the hydrophobic contact angle increased. Among them, PIFSS-10 and PIFSS-15 coatings showed nearly superhydrophobic contact angles (144° and 148°, respectively) and good self-cleaning property. It was confirmed by SEM and AFM studies that their hydrophobic and self-cleaning properties are due to uniform particle distribution and relatively high surface roughness. PIFSS-10 coating showed a high transmittance value (88%) at 550 nm and good self-cleaning property, therefore suitable as a transparent self-cleaning coating. The advantages of the coating are that the fabrication process is simple, and the substrate is reusable. The PIFSS coating is expected to be applied in solar cell panels, windows, lenses and safety goggles.

| S-EPMC8659165 | biostudies-literature

Highly Thermal Conductive Graphite Films Derived from the Graphitization of Chemically Imidized Polyimide Films.

Project description:With the large-scale application and high-speed operation of electronic equipment, the thermal diffusion problem presents an increasing requirement for effective heat dissipation materials. Herein, high thermal conductive graphite films were fabricated via the graphitization of polyimide (PI) films with different amounts of chemical catalytic reagent. The results showed that chemically imidized PI (CIPI) films exhibit a higher tensile strength, thermal stability, and imidization degree than that of purely thermally imidized PI (TIPI) films. The graphite films derived from CIPI films present a more complete crystal orientation and ordered arrangement. With only 0.72% chemical catalytic reagent, the graphitized CIPI film achieved a high thermal conductivity of 1767 W·m-1·K-1, which is much higher than that of graphited TIPI film (1331 W·m-1·K-1), with an increase of 32.8%. The high thermal conductivity is attributed to the large in-plane crystallite size and high crystal integrity. It is believed that the chemical imidization method prioritizes the preparation of high-quality PI films and helps graphite films achieve an excellent performance.

| S-EPMC8840353 | biostudies-literature

Response of osteoblasts on amine-based polymer coatings cor-relates with the amino group density

Project description:The integration of implants can be improved by physical but mainly by chemical modifications of the implant surface. It has already been shown that amine-based coatings improve cell attachment, cell migration, and intracellular signaling. The aim of this study was to determine the role of the amino group density in this positive cell response by developing controlled amino-rich nano-layers. Using Clariom S microarrays to perform genome-wide expression profilng, changes in adhesion related genes after cultivation of osteoblast-like cells on an amino group-rich coating could be seen.

2023-10-04 | GSE237945 | GEO

Germanane Monolayer Films as Antibacterial Coatings.

Project description:Germanane (GeH), a graphane analogue, has attracted significant interest because of its optoelectronic properties; however, the environmental and biological effects of GeH have scarcely been investigated so far. Here we report a facile approach based on the Langmuir-Schaefer deposition to produce homogeneous and dense GeH monolayer films on various substrates. In view of possible applications and to extend the use of GeH to unexplored fields, we investigated its antibacterial activity for the first time and found that this promising 2D structure exhibits remarkable antibacterial activity against both Gram-negative and Gram-positive bacterial strains.

| S-EPMC8025679 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data