Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

SARS-CoV-2 Disinfection of Air and Surface Contamination by TiO₂ Photocatalyst-Mediated Damage to Viral Morphology, RNA, and Protein.

ABSTRACT: SARS-CoV-2 is the causative agent of COVID-19, which is a global pandemic. SARS-CoV-2 is transmitted rapidly via contaminated surfaces and aerosols, emphasizing the importance of environmental disinfection to block the spread of virus. Ultraviolet C radiation and chemical compounds are effective for SARS-CoV-2 disinfection, but can only be applied in the absence of humans due to their toxicities. Therefore, development of disinfectants that can be applied in working spaces without evacuating people is needed. Here we showed that TiO₂-mediated photocatalytic reaction inactivates SARS-CoV-2 in a time-dependent manner and decreases its infectivity by 99.9% after 20 min and 120 min of treatment in aerosol and liquid, respectively. The mechanistic effects of TiO₂ photocatalyst on SARS-CoV-2 virion included decreased total observed virion count, increased virion size, and reduced particle surface spike structure, as determined by transmission electron microscopy. Damage to viral proteins and genome was further confirmed by western blotting and RT-qPCR, respectively. The multi-antiviral effects of TiO₂-mediated photocatalytic reaction implies universal disinfection potential for different infectious agents. Notably, TiO₂ has no adverse effects on human health, and therefore, TiO₂-induced photocatalytic reaction is suitable for disinfection of SARS-CoV-2 and other emerging infectious disease-causing agents in human habitation.

SUBMITTER: Matsuura R

PROVIDER: S-EPMC8161138 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

SARS-CoV-2 air and surface contamination in residential settings.

Project description:SARS-CoV-2 transmission occurs mainly indoors, through virus-laden airborne particles. Although the presence and infectivity of SARS-CoV-2 in aerosol are now acknowledged, the underlying circumstances for its occurrence are still under investigation. The contamination of domiciliary environments during the isolation of SARS-CoV-2-infected patients in their respective rooms in individual houses and in a nursing home was investigated by collecting surface and air samples in these environments. Surface contamination was detected in different contexts, both on high and low-touch surfaces. To determine the presence of virus particles in the air, two sampling methodologies were used: air and deposition sampling. Positive deposition samples were found in sampling locations above the patient's height, and SARS-CoV-2 RNA was detected in impactation air samples within a size fraction below 2.5 μm. Surface samples rendered the highest positivity rate and persistence for a longer period. The presence of aerosolized SARS-CoV-2 RNA occurred mainly in deposition samples and closer to symptom onset. To evaluate the infectivity of selected positive samples, SARS-CoV-2 viability assays were performed, but our study was not able to validate the virus viability. The presented results confirm the presence of aerosolized SARS-CoV-2 RNA in indoor compartments occupied by COVID-19 patients with mild symptoms, in the absence of aerosol-generating clinical procedures.

| S-EPMC9610309 | biostudies-literature

Inactivation of SARS-CoV-2 and photocatalytic degradation by TiO2 photocatalyst coatings

Project description:The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causative agent of the COVID-19, which is a global pandemic, has infected more than 552 million people, and killed more than 6.3 million people. SARS-CoV-2 can be transmitted through airborne route in addition to direct contact and droplet modes, the development of disinfectants that can be applied in working spaces without evacuating people is urgently needed. TiO2 is well known with some features of the purification, antibacterial/sterilization, making it could be developed disinfectants that can be applied in working spaces without evacuating people. Facing the severe epidemic, we expect to fully expand the application of our proposed effective approach of mechanical coating technique (MCT), which can be prepared on a large-scale fabrication of an easy-to-use TiO2/Ti photocatalyst coating, with hope to curb the epidemic. The photocatalytic inactivation of SARS-CoV-2 and influenza virus, and the photocatalytic degradation of acetaldehyde (C2H4O) and formaldehyde (CH2O) has been investigated. XRD and SEM results show that anatase TiO2 successfully coats on the surface of Ti coatings, while the crystal structure of anatase TiO2 can be increased during the following oxidation in air. The catalytic activity towards methylene blue of TiO2/Ti coating balls has been significantly enhanced by the followed oxidation in air, showing a very satisfying photocatalytic degradation of C2H4O and CH2O. Notably, the TiO2/Ti photocatalyst coating balls demonstrate a significant antiviral activity, with a decrease rate of virus reached 99.96% for influenza virus and 99.99% for SARS-CoV-2.

| S-EPMC9512902 | biostudies-literature

Water-Assisted Hole Trapping at the Highly Curved Surface of Nano-TiO2 Photocatalyst.

Project description:Heterogeneous photocatalysis is vital in solving energy and environmental issues that this society is confronted with. Although photocatalysts are often operated in the presence of water, it has not been yet clarified how the interaction with water itself affects charge dynamics in photocatalysts. Using water-coverage-controlled steady and transient infrared absorption spectroscopy and large-model (?800 atoms) ab initio calculations, we clarify that water enhances hole trapping at the surface of TiO2 nanospheres but not of well-faceted nanoparticles. This water-assisted effect unique to the nanospheres originates from water adsorption as a ligand at a low-coordinated Ti-OH site or through robust hydrogen bonding directly to the terminal OH at the highly curved nanosphere surface. Thus, the interaction with water at the surface of nanospheres can promote photocatalytic reactions of both oxidation and reduction by elongating photogenerated carrier lifetimes. This morphology-dependent water-assisted effect provides a novel and rational basis for designing and engineering nanophotocatalyst morphology to improve photocatalytic performances.

| S-EPMC5916465 | biostudies-literature

Detection of air and surface contamination by SARS-CoV-2 in hospital rooms of infected patients.

Project description:Understanding the particle size distribution in the air and patterns of environmental contamination of SARS-CoV-2 is essential for infection prevention policies. Here we screen surface and air samples from hospital rooms of COVID-19 patients for SARS-CoV-2 RNA. Environmental sampling is conducted in three airborne infection isolation rooms (AIIRs) in the ICU and 27 AIIRs in the general ward. 245 surface samples are collected. 56.7% of rooms have at least one environmental surface contaminated. High touch surface contamination is shown in ten (66.7%) out of 15 patients in the first week of illness, and three (20%) beyond the first week of illness (p?=?0.01, ?2 test). Air sampling is performed in three of the 27 AIIRs in the general ward, and detects SARS-CoV-2 PCR-positive particles of sizes >4?µm and 1-4?µm in two rooms, despite these rooms having 12 air changes per hour. This warrants further study of the airborne transmission potential of SARS-CoV-2.

| S-EPMC7260225 | biostudies-literature

Air and surface contamination by SARS-CoV-2 virus in a tertiary hospital in Wuhan, China.

Project description:BackgroundFew studies have explored air and surface contamination by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in healthcare settings.MethodsAir and surface samples were collected from the isolation wards and intensive care units designated for coronavirus disease 2019 (COVID-19) patients. Clinical data and the results of nasopharyngeal specimen and serum antibody testing were also collected for the patient sample.ResultsA total of 367 air and surface swab samples were collected from the patient care areas of 15 patients with mild COVID-19 and nine patients with severe/critical COVID-19. Only one air sample taken during the intubation procedure tested positive. High-touch surfaces were slightly more likely to be contaminated with SARS-CoV-2 RNA than low-touch surfaces. Contamination rates were slightly higher near severe/critical patients than near mild patients, although this difference was not statistically significant (p > 0.05). Surface contamination was still found near the patients with both positive IgG and IgM.ConclusionsAir and surface contamination with viral RNA was relatively low in these healthcare settings after the enhancement of infection prevention and control. Environmental contamination could still be found near seroconverted patients, suggesting the need to maintain constant vigilance in healthcare settings to reduce healthcare-associated infection during the COVID-19 pandemic.

| S-EPMC7384415 | biostudies-literature

UVC disinfects SARS-CoV-2 by induction of viral genome damage without apparent effects on viral morphology and proteins.

Project description:Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has been a pandemic threat worldwide and causes severe health and economic burdens. Contaminated environments, such as personal items and room surfaces, are considered to have virus transmission potential. Ultraviolet C (UVC) light has demonstrated germicidal ability and removes environmental contamination. UVC has inactivated SARS-CoV-2; however, the underlying mechanisms are not clear. It was confirmed here that UVC 253.7 nm, with a dose of 500 μW/cm2, completely inactivated SARS-CoV-2 in a time-dependent manner and reduced virus infectivity by 10-4.9-fold within 30 s. Immunoblotting analysis for viral spike and nucleocapsid proteins showed that UVC treatment did not damage viral proteins. The viral particle morphology remained intact even when the virus completely lost infectivity after UVC irradiation, as observed by transmission electronic microscopy. In contrast, UVC irradiation-induced genome damage was identified using the newly developed long reverse-transcription quantitative-polymerase chain reaction (RT-qPCR) assay, but not conventional RT-qPCR. The six developed long RT-PCR assays that covered the full-length viral genome clearly indicated a negative correlation between virus infectivity and UVC irradiation-induced genome damage (R2 ranging from 0.75 to 0.96). Altogether, these results provide evidence that UVC inactivates SARS-CoV-2 through the induction of viral genome damage.

| S-EPMC8257663 | biostudies-literature

Surface Disinfection

Project description:The patient-care areas in a dental setting become contaminated with bacterial and viral pathogens during patient treatment. Incorporating standard precautions set forth by CDC and OSHA guidelines will reduce the risk of disease transmission. Contaminated environmental surfaces, including clinical contact and housekeeping surfaces, become a reservoir of infectious material with the potential to spread an infection to health-care personnel and patients. Transmission of pathogens can occur by direct or indirect contact of clinical contact surfaces and the hands of health-care personnel. Proper infection control protocol of these surfaces includes cleaning, disinfecting, and the use of barriers to prevent the spread of infectious pathogens. This chapter will provide an overview of the disinfection protocol of environmental surfaces in the dental setting. The topics include the various chemical formulations of hospital disinfectants and their proper use, as well as physical barriers that aim to reduce the degree of contamination in the dental treatment area thus decreasing the probability of cross-infection and disease transmission.

| S-EPMC7120455 | biostudies-literature

SARS-CoV-2 surface and air contamination in an acute healthcare setting during the first and second pandemic waves.

Project description:BackgroundSurfaces and air in healthcare facilities can be contaminated with severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). Previously, the authors identified SARS-CoV-2 RNA on surfaces and air in their hospital during the first wave of the coronavirus disease 2019 pandemic (April 2020).AimTo explore whether the profile of SARS-CoV-2 surface and air contamination had changed between April 2020 and January 2021.MethodsThis was a prospective, cross-sectional, observational study in a multi-site London hospital. In January 2021, surface and air samples were collected from comparable areas to those sampled in April 2020, comprising six clinical areas and a public area. SARS-CoV-2 was detected using reverse transcription polymerase chain reaction and viral culture. Sampling was also undertaken in two wards with natural ventilation alone. The ability of the prevalent variants at the time of the study to survive on dry surfaces was evaluated.FindingsNo viable virus was recovered from surfaces or air. Five percent (N=14) of 270 surface samples and 4% (N=1) of 27 air samples were positive for SARS-CoV-2, which was significantly lower than in April 2020 [52% (N=114) of 218 surface samples and 48% (N=13) of 27 air samples (P<0.001, Fisher's exact test)]. There was no clear difference in the proportion of surface and air samples positive for SARS-CoV-2 RNA based on the type of ventilation in the ward. All variants tested survived on dry surfaces for >72 h, with a <3-log10 reduction in viable count.ConclusionThis study suggests that enhanced infection prevention measures have reduced the burden of SARS-CoV-2 RNA on surfaces and air in healthcare facilities.

| S-EPMC9683853 | biostudies-literature

Environmental surface and air contamination in severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) patient rooms by disease severity.

Project description:BackgroundThe coronavirus disease 2019 (COVID-19) continues to spread around the world. In addition to community-acquired infections, nosocomial infections are also a major social concern. The likelihood of environmental contamination and transmission of the virus based on disease severity is unknown.MethodsWe collected nasopharyngeal, environmental and air samples from patients with COVID-19 admitted to the National Centre for Global Health and Medicine between January 29th and February 29th, 2020. The patients were classified by severity of disease. The collected samples were tested using severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) real-time reverse transcription polymerase chain reaction (real-time RT-PCR).ResultsSARS-CoV-2 was not detected in a subset of 11 air samples. Of the 141 environmental samples collected from three patient bays and two single rooms, four samples tested positive for SARS-CoV-2 by real-time RT-PCR. Detections were made on the surface of a stethoscope used in the care of a patient with severe disease, on the intubation tube of a patient classified as critical (and on ventilator management), and on the surface of a gown worn by the nurse providing care.ConclusionsRegardless of the patients' disease severity, SARS-CoV-2 was detected on very few environmental surfaces. However, detection of SARS-CoV-2 on stethoscopes used in the care of multiple patients and on the surface of gowns worn by clinical staff indicates that medical devices may be linked to the spread of infection.

| S-EPMC7550981 | biostudies-literature

Surface contamination with SARS-CoV-2: A systematic review.

Project description:Little is known about contaminated surfaces as a route of transmission for SARS-CoV- 2 and a systematic review is missing and urgently needed to provide guidelines for future research studies. As such, the aim of the present study was to review the current scientific knowledge and to summarize the existing studies in which SARS-CoV-2 has been detected in inanimate surfaces. This systematic review includes studies since the emergence of SARS-CoV-2, available in PubMed/MEDLINE and Scopus. Duplicate publications were removed, and exclusion criteria was applied to eliminate unrelated studies, resulting in 37 eligible publications. The present study provides the first overview of SARS-CoV-2 detection in surfaces. The highest detection rates occurred in hospitals and healthcare facilities with COVID-19 patients. Contamination with SARS-CoV-2 on surfaces was detected in a wide range of facilities and surfaces. There is a lack of studies performing viability testing for SARS-CoV-2 recovered from surfaces, and consequently it is not yet possible to assess the potential for transmission via surfaces.

| S-EPMC8302502 | biostudies-literature