Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

3D sub-nanometer analysis of glucose in an aqueous solution by cryo-atom probe tomography.

ABSTRACT: Atom Probe Tomography (APT) is currently a well-established technique to analyse the composition of solid materials including metals, semiconductors and ceramics with up to near-atomic resolution. Using an aqueous glucose solution, we now extended the technique to frozen solutions. While the mass signals of the common glucose fragments C_xH_y and C_xO_yH_z overlap with (H₂O)_nH from water, we achieved stoichiometrically correct values via signal deconvolution. Density functional theory (DFT) calculations were performed to investigate the stability of the detected pyranose fragments. This paper demonstrates APT's capabilities to achieve sub-nanometre resolution in tracing whole glucose molecules in a frozen solution by using cryogenic workflows. We use a solution of defined concentration to investigate the chemical resolution capabilities as a step toward the measurement of biological molecules. Due to the evaporation of nearly intact glucose molecules, their position within the measured 3D volume of the solution can be determined with sub-nanometre resolution. Our analyses take analytical techniques to a new level, since chemical characterization methods for cryogenically-frozen solutions or biological materials are limited.

SUBMITTER: Schwarz TM

PROVIDER: S-EPMC8172843 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Cryo-focused ion beam preparation of perovskite based solar cells for atom probe tomography.

Project description:Focused-ion beam lift-out and annular milling is the most common method used for obtaining site specific specimens for atom probe tomography (APT) experiments and transmission electron microscopy. However, one of the main limitations of this technique comes from the structural damage as well as chemical degradation caused by the beam of high-energy ions. These aspects are especially critical in highly-sensitive specimens. In this regard, ion beam milling under cryogenic conditions has been an established technique for damage mitigation. Here, we implement a cryo-focused ion beam approach to prepare specimens for APT measurements from a quadruple cation perovskite-based solar cell device with 19.7% efficiency. As opposed to room temperature FIB milling we found that cryo-milling considerably improved APT results in terms of yield and composition measurement, i.e. halide loss, both related to less defects within the APT specimen. Based on our approach we discuss the prospects of reliable atom probe measurements of perovskite based solar cell materials. An insight into the field evaporation behavior of the organic-inorganic molecules that compose the perovskite material is also given with the aim of expanding the applicability of APT experiments towards nano-characterization of complex organo-metal materials.

| S-EPMC6964857 | biostudies-literature

Aqueous Solution-Processed Nanometer-Thin Crystalline Indium Ytterbium Oxide Thin-Film Transistors.

Project description:We demonstrate the growth of ultra-thin (~5 nm) indium ytterbium oxide (In-Yb-O) thin film using a simple vacuum-free aqueous solution approach for the first time. The influences of Yb addition on the microstructural, chemical, optical, and electrical properties of In2O3 are well investigated. The analyses indicate that Yb dopant could suppress oxygen vacancy defects effectively owing to the lower standard electrode potential, lower electronegativity, and stronger metal-oxide bond strength than that of In. The optimized In-Yb-O thin-film transistors (TFTs) exhibit excellent electrical performance (mobility of 8 cm2/Vs and on/off ratio of ~108) and enhanced stability. The triumph of In-Yb-O TFTs is owing to the high quality In2O3 matrix, the remarkable suppressor of Yb, and the nanometer-thin and atomically smooth nature (RMS: ~0.26 nm) of channel layer. Therefore, the eco-friendly water-induced ultra-thin In-Yb-O channel provides an excellent opportunity for future large-scale and cost-effective electronic applications.

| S-EPMC9000645 | biostudies-literature

The Piezoresponse in WO<sub>3</sub> Thin Films Due to N<sub>2</sub>-Filled Nanovoids Enrichment by Atom Probe Tomography.

Project description:Tungsten trioxide (WO3) is a versatile n-type semiconductor with outstanding chromogenic properties highly used to fabricate sensors and electrochromic devices. We present a comprehensive experimental study related to piezoresponse with piezoelectric coefficient d33 = 35 pmV-1 on WO3 thin films ~200 nm deposited using RF-sputtering onto alumina (Al2O3) substrate with post-deposit annealing treatment of 400 °C in a 3% H2/N2-forming gas environment. X-ray diffraction (XRD) confirms a mixture of orthorhombic and tetragonal phases of WO3 with domains with different polarization orientations and hysteresis behavior as observed by piezoresponse force microscopy (PFM). Furthermore, using atom probe tomography (APT), the microstructure reveals the formation of N2-filled nanovoids that acts as strain centers producing a local deformation of the WO3 lattice into a non-centrosymmetric structure, which is related to piezoresponse observations.

| S-EPMC9960742 | biostudies-literature

Nanoscale analysis of frozen honey by atom probe tomography.

Project description:Three-dimensional reconstruction of the analysed volume is one of the main goals of atom probe tomography (APT) and can deliver nearly atomic resolution (~ 0.2 nm spatial resolution) and chemical information with a mass sensitivity down to the ppm range. Extending this technique to frozen biological systems would have an enormous impact on the structural analysis of biomolecules. In previous works, we have shown that it is possible to measure frozen liquids with APT. In this paper, we demonstrate the ability of APT to trace nanoscale precipitation in frozen natural honey. While the mass signals of the common sugar fragments CxHy and CxOyHz overlap with (H2O)nH from water, we achieved correct stoichiometric values via different interpretation approaches for the peaks and thus determined the water content reliably. Next, we use honey to investigate the spatial resolution capabilities as a step toward the measurement of biological molecules in solution in 3D with sub-nanometer resolution. This may take analytical techniques to a new level, since methods of chemical characterization for cryogenic samples, especially biological samples, are still limited.

| S-EPMC9587987 | biostudies-literature

Computational separation of conformational heterogeneity using cryo-electron tomography and 3D sub-volume averaging.

Project description:We have previously used cryo-electron tomography combined with sub-volume averaging and classification to obtain 3D structures of macromolecular assemblies in cases where a single dominant species was present, and applied these methods to the analysis of a variety of trimeric HIV-1 and SIV envelope glycoproteins (Env). Here, we extend these studies by demonstrating automated, iterative, missing wedge-corrected 3D image alignment and classification methods to distinguish multiple conformations that are present simultaneously. We present a method for measuring the spatial distribution of the vector elements representing distinct conformational states of Env. We identify data processing strategies that allow clear separation of the previously characterized closed and open conformations, as well as unliganded and antibody-liganded states of Env when they are present in mixtures. We show that identifying and removing spikes with the lowest signal-to-noise ratios improves the overall accuracy of alignment between individual Env sub-volumes, and that alignment accuracy, in turn, determines the success of image classification in assessing conformational heterogeneity in heterogeneous mixtures. We validate these procedures for computational separation by successfully separating and reconstructing distinct 3D structures for unliganded and antibody-liganded as well as open and closed conformations of Env present simultaneously in mixtures.

| S-EPMC3350607 | biostudies-literature

Cytotoxic sub-nanometer aqueous platinum clusters as potential antitumoral agents.

Project description:Ligand-free sub-nanometer metal clusters (MCs) of Pt, Ir, Rh, Au and Cu, are prepared here in neat water and used as extremely active (nM) antitumoral agents for HeLa and A2870 cells. The preparation just consists of adding the biocompatible polymer ethylene-vinyl alcohol (EVOH) to an aqueous solution of the corresponding metal salt, to give liters of a MC solution after filtration of the polymer. Since the MC solution is composed of just neat metal atoms and water, the intrinsic antitumoral activity of the different sub-nanometer metal clusters can now fairly be evaluated. Pt clusters show an IC50 of 0.48 μM for HeLa and A2870 cancer cells, 23 times higher than that of cisplatin and 1000 times higher than that of Pt NPs, and this extremely high cytotoxicity also occurs for cisplatin-resistant (A2870 cis) cells, with a resistance factor of 1.4 (IC50 = 0.68 μM). Rh and Ir clusters showed an IC50 ∼ 1 μM. Combined experimental and computational studies support an enhanced internalization and cytotoxic activation.

| S-EPMC9724608 | biostudies-literature

Field evaporation and atom probe tomography of pure water tips.

Project description:Measuring biological samples by atom probe tomography (APT) in their natural environment, i.e. aqueous solution, would take this analytical method, which is currently well established for metals, semi-conductive materials and non-metals, to a new level. It would give information about the 3D chemical structure of biological systems, which could enable unprecedented insights into biological systems and processes, such as virus protein interactions. For this future aim, we present as a first essential step the APT analysis of pure water (Milli-Q) which is the main component of biological systems. After Cryo-preparation, nanometric water tips are field evaporated with assistance by short laser pulses. The obtained data sets of several tens of millions of atoms reveal a complex evaporation behavior. Understanding the field evaporation process of water is fundamental for the measurement of more complex biological systems. For the identification of the individual signals in the mass spectrum, DFT calculations were performed to prove the stability of the detected molecules.

| S-EPMC7680140 | biostudies-literature

Polarized Neutrons Observed Nanometer-Thick Crystalline Ice Plates in Frozen Glucose Solution.

Project description:Spin-contrast-variation (SCV) small-angle neutron scattering (SANS) is a technique to determine the nanostructure of composite materials from the scattering of polarized neutrons that changes with proton polarization of samples. The SCV-SANS enabled us to determine structure of nanoice crystals that were generated in rapidly frozen sugar solutions by separating the overlapped signals from the nanoice crystals and frozen amorphous solutions. In the frozen glucose solution, we found that the nanoice crystals formed a planar structure with a radius larger than several tens of nanometers and a thickness of 2.5 ± 0.5 nm, which was close to the critical nucleation size of ice crystals in supercooled water. This result suggests that the glucose molecules were preferentially bound to a specific face of nanoice crystals and then blocked the crystal growth perpendicular to that face.

| S-EPMC10476184 | biostudies-literature

Reconstructing virus structures from nanometer to near-atomic resolutions with cryo-electron microscopy and tomography.

Project description:The past few decades have seen tremendous advances in single-particle electron -cryo-microscopy (cryo-EM). The field has matured to the point that near-atomic resolution density maps can be generated for icosahedral viruses without the need for crystallization. In parallel, substantial progress has been made in determining the structures of nonicosahedrally arranged proteins in viruses by employing either single-particle cryo-EM or cryo-electron tomography (cryo-ET). Implicit in this course have been the availability of a new generation of electron cryo-microscopes and the development of the computational tools that are essential for generating these maps and models. This methodology has enabled structural biologists to analyze structures in increasing detail for virus particles that are in different morphogenetic states. Furthermore, electron imaging of frozen, hydrated cells, in the process of being infected by viruses, has also opened up a new avenue for studying virus structures "in situ". Here we present the common techniques used to acquire and process cryo-EM and cryo-ET data and discuss their implications for structural virology both now and in the future.

| S-EPMC3954858 | biostudies-literature

Sub-10 Nanometer Feature Size in Silicon Using Thermal Scanning Probe Lithography.

Project description:High-resolution lithography often involves thin resist layers which pose a challenge for pattern characterization. Direct evidence that the pattern was well-defined and can be used for device fabrication is provided if a successful pattern transfer is demonstrated. In the case of thermal scanning probe lithography (t-SPL), highest resolutions are achieved for shallow patterns. In this work, we study the transfer reliability and the achievable resolution as a function of applied temperature and force. Pattern transfer was reliable if a pattern depth of more than 3 nm was reached and the walls between the patterned lines were slightly elevated. Using this geometry as a benchmark, we studied the formation of 10-20 nm half-pitch dense lines as a function of the applied force and temperature. We found that the best pattern geometry is obtained at a heater temperature of ∼600 °C, which is below or close to the transition from mechanical indentation to thermal evaporation. At this temperature, there still is considerable plastic deformation of the resist, which leads to a reduction of the pattern depth at tight pitch and therefore limits the achievable resolution. By optimizing patterning conditions, we achieved 11 nm half-pitch dense lines in the HM8006 transfer layer and 14 nm half-pitch dense lines and L-lines in silicon. For the 14 nm half-pitch lines in silicon, we measured a line edge roughness of 2.6 nm (3σ) and a feature size of the patterned walls of 7 nm.

| S-EPMC5746844 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data