Highly sensitive active pixel image sensor array driven by large-area bilayer MoS2 transistor circuitry.
Ontology highlight
ABSTRACT:
SUBMITTER: Hong S
PROVIDER: S-EPMC8196169 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Soft bioelectronic devices provide new opportunities for next-generation implantable devices owing to their soft mechanical nature that leads to minimal tissue damages and immune responses. However, a soft form of the implantable optoelectronic device for optical sensing and retinal stimulation has not been developed yet because of the bulkiness and rigidity of conventional imaging modules and their composing materials. Here, we describe a high-density and hemispherically curved image sensor array that leverages the atomically thin MoS2-graphene heterostructure and strain-releasing device designs. The hemispherically curved image sensor array exhibits infrared blindness and successfully acquires pixelated optical signals. We corroborate the validity of the proposed soft materials and ultrathin device designs through theoretical modeling and finite element analysis. Then, we propose the ultrathin hemispherically curved image sensor array as a promising imaging element in the soft retinal implant. The CurvIS array is applied as a human eye-inspired soft implantable optoelectronic device that can detect optical signals and apply programmed electrical stimulation to optic nerves with minimum mechanical side effects to the retina.
| S-EPMC5698290 | biostudies-literature
Project description:Conventional imaging and recognition systems require an extensive amount of data storage, pre-processing, and chip-to-chip communications as well as aberration-proof light focusing with multiple lenses for recognizing an object from massive optical inputs. This is because separate chips (i.e., flat image sensor array, memory device, and CPU) in conjunction with complicated optics should capture, store, and process massive image information independently. In contrast, human vision employs a highly efficient imaging and recognition process. Here, inspired by the human visual recognition system, we present a novel imaging device for efficient image acquisition and data pre-processing by conferring the neuromorphic data processing function on a curved image sensor array. The curved neuromorphic image sensor array is based on a heterostructure of MoS2 and poly(1,3,5-trimethyl-1,3,5-trivinyl cyclotrisiloxane). The curved neuromorphic image sensor array features photon-triggered synaptic plasticity owing to its quasi-linear time-dependent photocurrent generation and prolonged photocurrent decay, originated from charge trapping in the MoS2-organic vertical stack. The curved neuromorphic image sensor array integrated with a plano-convex lens derives a pre-processed image from a set of noisy optical inputs without redundant data storage, processing, and communications as well as without complex optics. The proposed imaging device can substantially improve efficiency of the image acquisition and recognition process, a step forward to the next generation machine vision.
| S-EPMC7683533 | biostudies-literature
Project description:The application of field-effect transistor (FET) devices with atomically thin channels as sensors has attracted significant attention, where the adsorption of atoms/molecules on the channels can be detected by the change in the properties of FET. Thus, to further enhance the chemical sensitivity of FETs, we developed a method to distinguish the chemical properties of adsorbates from the electric behavior of FET devices. Herein, we explored the variation in the FET properties of an MoS2-FET upon visible light injection and the effect of molecule adsorption for chemical recognition. By injecting light, the drain current (I d) increased from the light-off state, which is defined as (ΔI d)ph. We examined this effect using CuPc molecules deposited on the channel. The (ΔI d)ph vs. wavelength continuous spectrum in the visible region showed a peak at the energy for the excitation from the highest occupied orbital (HOMO) to the molecule-induced state (MIS). The energy position and the intensity of this feature showed a sensitive variation with the adsorption of the CuPc molecule and are in good agreement with previously reported photo-absorption spectroscopy data, indicating that this technique can be employed for chemical recognition.
| S-EPMC9037302 | biostudies-literature
Project description:Two-dimensional molybdenum disulfide (MoS2) has been extensively investigated in the field of optoelectronic devices. However, most reported MoS2 phototransistors are fabricated using the mechanical exfoliation method to obtain micro-scale MoS2 flakes, which is laboratory- feasible but not practical for the future industrial fabrication of large-scale pixel arrays. Recently, wafer-scale MoS2 growth has been rapidly developed, but few results of uniform large-scale photoelectric devices were reported. Here, we designed a 12 × 12 pixels pixel array image sensor fabricated on a 2 cm × 2 cm monolayer MoS2 film grown by chemical vapor deposition (CVD). The photogating effect induced by the formation of trap states ensures a high photoresponsivity of 364 AW-1, which is considerably superior to traditional CMOS sensors (≈0.1 AW-1). Experimental results also show highly uniform photoelectric properties in this array. Finally, the concatenated image obtained by laser lighting stencil and photolithography mask demonstrates the promising potential of 2D MoS2 for future optoelectrical applications.
| S-EPMC9739261 | biostudies-literature
Project description:Layered materials such as graphite and transition metal dichalcogenides have extremely anisotropic mechanical properties owing to orders of magnitude difference between in-plane and out-of-plane interatomic interaction strengths. Although effects of mechanical perturbations on either intralayer or interlayer interactions have been extensively investigated, mutual correlations between them have rarely been addressed. Here, we show that layered materials have an inevitable coupling between in-plane uniaxial strain and interlayer shear. Because of this, the uniaxial in-plane strain induces an anomalous splitting of the degenerate interlayer shear phonon modes such that the split shear mode along the tensile strain is not softened but hardened contrary to the case of intralayer phonon modes. We confirm the effect by measuring Raman shifts of shear modes of bilayer MoS2 under strain. Moreover, by analyzing the splitting, we obtain an unexplored off-diagonal elastic constant, demonstrating that Raman spectroscopy can determine almost all mechanical constants of layered materials.
| S-EPMC5678169 | biostudies-literature
Project description:Measuring the behavior of redox-active molecules in space and time is crucial for understanding chemical and biological systems and for developing new technologies. Optical schemes are noninvasive and scalable, but usually have a slow response compared to electrical detection methods. Furthermore, many fluorescent molecules for redox detection degrade in brightness over long exposure times. Here, we show that the photoluminescence of "pixel" arrays of monolayer MoS2 can image spatial and temporal changes in redox molecule concentration. Because of the strong dependence of MoS2 photoluminescence on doping, changes in the local chemical potential substantially modulate the photoluminescence of MoS2, with a sensitivity of 0.9 mV / Hz on a 5 μm × 5 μm pixel, corresponding to better than parts-per-hundred changes in redox molecule concentration down to nanomolar concentrations at 100-ms frame rates. This provides a new strategy for visualizing chemical reactions and biomolecules with a two-dimensional material screen.
| S-EPMC6839941 | biostudies-literature
Project description:Monolayer molybdenum disulfide (MoS2) possesses a desirable direct bandgap with moderate carrier mobility, whereas graphene (Gr) exhibits a zero bandgap and excellent carrier mobility. Numerous approaches have been suggested for concomitantly realizing high on/off current ratio and high carrier mobility in field-effect transistors, but little is known to date about the effect of two-dimensional layered materials. Herein, we propose a Gr/MoS2 heterojunction platform, i.e., junction field-effect transistor (JFET), that enhances the carrier mobility by a factor of ~ 10 (~ 100 cm2 V-1 s-1) compared to that of monolayer MoS2, while retaining a high on/off current ratio of ~ 108 at room temperature. The Fermi level of Gr can be tuned by the wide back-gate bias (VBG) to modulate the effective Schottky barrier height (SBH) at the Gr/MoS2 heterointerface from 528 meV (n-MoS2/p-Gr) to 116 meV (n-MoS2/n-Gr), consequently enhancing the carrier mobility. The double humps in the transconductance derivative profile clearly reveal the carrier transport mechanism of Gr/MoS2, where the barrier height is controlled by electrostatic doping.
| S-EPMC7403303 | biostudies-literature
Project description:Second-harmonic generation (SHG) is a non-linear optical process, where two photons coherently combine into one photon of twice their energy. Efficient SHG occurs for crystals with broken inversion symmetry, such as transition metal dichalcogenide monolayers. Here we show tuning of non-linear optical processes in an inversion symmetric crystal. This tunability is based on the unique properties of bilayer MoS2, that shows strong optical oscillator strength for the intra- but also interlayer exciton resonances. As we tune the SHG signal onto these resonances by varying the laser energy, the SHG amplitude is enhanced by several orders of magnitude. In the resonant case the bilayer SHG signal reaches amplitudes comparable to the off-resonant signal from a monolayer. In applied electric fields the interlayer exciton energies can be tuned due to their in-built electric dipole via the Stark effect. As a result the interlayer exciton degeneracy is lifted and the bilayer SHG response is further enhanced by an additional two orders of magnitude, well reproduced by our model calculations. Since interlayer exciton transitions are highly tunable also by choosing twist angle and material combination our results open up new approaches for designing the SHG response of layered materials.
| S-EPMC8617052 | biostudies-literature
Project description:Sensors based on two-dimensional (2D) field-effect transistors (FETs) are extremely sensitive and can detect charged analytes with attomolar limits of detection (LOD). Despite some impressive LODs, the operating mechanisms and factors that determine the signal-to-noise ratio in 2D FET-based sensors remain poorly understood. These uncertainties, coupled with an expansive design space for sensor layout and analyte positioning, result in a field with many reported highlights but limited collective progress. Here, we provide insight into sensing mechanisms of 2D molybdenum disulfide (MoS2) FETs by realizing precise control over the position and charge of an analyte using a customized atomic force microscope (AFM), with the AFM tip acting as an analyte. The sensitivity of the MoS2 FET channel is revealed to be nonuniform, manifesting sensitive hotspots with locations that are stable over time. When the charge of the analyte is varied, an asymmetry is observed in the device drain-current response, with analytes acting to turn the device off leading to a 2.5× increase in the signal-to-noise ratio (SNR). We developed a numerical model, applicable to all FET-based charge-detection sensors, that confirms our experimental observation and suggests an underlying mechanism. Further, extensive characterization of a set of different MoS2 FETs under various analyte conditions, coupled with the numerical model, led to the identification of three distinct SNRs that peak with dependence on the layout and operating conditions used for a sensor. These findings reveal the important role of analyte position and coverage in determining the optimal operating bias conditions for maximal sensitivity in 2D FET-based sensors, which provides key insights for future sensor design and control.
| S-EPMC7895328 | biostudies-literature
Project description:Von Neumann architecture-based computing, while widely successful in personal computers and embedded systems, faces inherent challenges including the von Neumann bottleneck, particularly amidst the ongoing surge of data-intensive tasks. Neuromorphic computing, designed to integrate arithmetic, logic, and memory operations, has emerged as a promising solution for improving energy efficiency and performance. This approach requires the construction of an artificial synaptic device that can simultaneously perform signal processing, learning, and memory operations. We present a photo-synaptic device with 32 analog multi-states by exploiting field-effect transistors based on the lateral heterostructures of two-dimensional (2D) WS2 and MoS2 monolayers, formed through a two-step metal-organic chemical vapor deposition process. These lateral heterostructures offer high photoresponsivity and enhanced efficiency of charge trapping at the interface between the heterostructures and SiO2 due to the presence of the WS2 monolayer with large trap densities. As a result, it enables the photo-synaptic transistor to implement synaptic behaviors of long-term plasticity and high recognition accuracy. To confirm the feasibility of the photo-synapse, we investigated its synaptic characteristics under optical and electrical stimuli, including the retention of excitatory post-synaptic currents, potentiation, habituation, nonlinearity factor, and paired-pulse facilitation. Our findings suggest the potential of versatile 2D material-synapse with a high density of device integration.
| S-EPMC10959970 | biostudies-literature