Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thermal and Humidity Stability of Mixed Spacer Cations 2D Perovskite Solar Cells.

ABSTRACT: In this article, two different types of spacer cations, 1,4-butanediamonium (BDA²⁺) and 2-phenylethylammonium (PEA⁺) are co-used to prepare the perovskite precursor solutions with the formula of (BDA)_1- _a (PEA₂) _a MA₄Pb₅X₁₆. By simply mixing the two spacer cations, the self-assembled polycrystalline films of (BDA)_0.8(PEA₂)_0.2MA₄Pb₅X₁₆ are obtained, and BDA²⁺ is located in the crystal grains and PEA⁺ is distributed on the surface. The films display a small exciton binding energy, uniformly distributed quantum wells and improved carrier transport. Besides, utilizing mixed spacer cations also induces better crystallinity and vertical orientation of 2D perovskite (BDA)_0.8(PEA₂)_0.2MA₄Pb₅X₁₆ films. Thus, a power conversion efficiency (PCE) of 17.21% is achieved in the optimized perovskite solar cells with the device structure of ITO/PEDOT:PSS/Perovskite/PCBM/BCP/Ag. In addition, the complementary humidity and thermal stability are obtained, which are ascribed to the enhanced interlayer interaction by BDA²⁺ and improved moisture resistance by the hydrophobic group of PEA⁺. The encapsulated devices are retained over 95% or 75% of the initial efficiency after storing 500 h in ambient air under 40 ± 5% relative humidity or 100 h in nitrogen at 60 °C.

SUBMITTER: Yu H

PROVIDER: S-EPMC8224444 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Effects of Annealing Conditions on Mixed Lead Halide Perovskite Solar Cells and Their Thermal Stability Investigation.

Project description:In this work, efficient mixed organic cation and mixed halide (MA0.7FA0.3Pb(I0.9Br0.1)?) perovskite solar cells are demonstrated by optimizing annealing conditions. AFM, XRD and PL measurements show that there is a better perovskite film quality for the annealing condition at 100 °C for 30 min. The corresponding device exhibits an optimized PCE of 16.76% with VOC of 1.02 V, JSC of 21.55 mA/cm² and FF of 76.27%. More importantly, the mixed lead halide perovskite MA0.7FA0.3Pb(I0.9Br0.1)? can significantly increase the thermal stability of perovskite film. After being heated at 80 °C for 24 h, the PCE of the MA0.7FA0.3Pb(I0.9Br0.1)? device still remains at 70.00% of its initial value, which is much better than the control MAPbI? device, where only 46.50% of its initial value could be preserved. We also successfully fabricated high-performance flexible mixed lead halide perovskite solar cells based on PEN substrates.

| S-EPMC5551880 | biostudies-other

2D perovskite stabilized phase-pure formamidinium perovskite solar cells.

Project description:Compositional engineering has been used to overcome difficulties in fabricating high-quality phase-pure formamidinium perovskite films together with its ambient instability. However, this comes alongside an undesirable increase in bandgap that sacrifices the device photocurrent. Here we report the fabrication of phase-pure formamidinium-lead tri-iodide perovskite films with excellent optoelectronic quality and stability. Incorporation of 1.67?mol% of 2D phenylethylammonium lead iodide into the precursor solution enables the formation of phase-pure formamidinium perovskite with an order of magnitude enhanced photoluminescence lifetime. The 2D perovskite spontaneously forms at grain boundaries to protect the formamidinium perovskite from moisture and suppress ion migration. A stabilized power conversion efficiency (PCE) of 20.64% (certified stabilized PCE of 19.77%) is achieved with a short-circuit current density exceeding 24?mA?cm-2 and an open-circuit voltage of 1.130?V, corresponding to a loss-in-potential of 0.35?V, and significantly enhanced operational stability.

| S-EPMC6070510 | biostudies-literature

Influence of voids on the thermal and light stability of perovskite solar cells.

Project description:The formation of voids in perovskite films close to the buried interface has been reported during film deposition. These voids are thought to limits the efficiency and stability of perovskite solar cells (PSCs). Here, we studied the voids formed during operation in perovskite films that were optimized during the solution deposition process to avoid voids. New voids formed during operation are found to assemble along grain boundaries at the bottom interface, caused by the loss of residual solvent and conversion of amorphous phase to crystalline phase. Unexpectedly, the formation of these voids did not negatively affect the stability of PSCs. Decreasing the amorphous region in perovskites by thermal annealing decreased the positive iodide interstitial density, and improved the light stability of PSCs. The annealed devices maintained 90% of their initial efficiency and light soaking for 1900 hours at open circuit condition under 1-sun illumination at 50°C.

| S-EPMC9506713 | biostudies-literature

The Relation of Phase-Transition Effects and Thermal Stability of Planar Perovskite Solar Cells.

Project description:A power conversion efficiency of over 20% has been achieved in CH3NH3PbI3-based perovskite solar cells (PSC), however, low thermal stability associated with the presence of a phase transition between tetragonal and cubic structures near room temperature is a major issue that must be overcome for future practical applications. Here, the influence of the phase transition on the thermal stability of PSCs is investigated in detail by comparing four kinds of perovskite films with different compositions of halogen atoms and organic components. Thermally stimulated current measurements reveal that a large number of carrier traps are generated in solar cells with the perovskite CH3NH3PbI3 as a light absorber after operation at 85 °C, which is higher than the phase-transition temperature. Electrochemical impedance spectroscopy measurements further exclude effects of a possible morphology change on the formation of carrier traps. These carrier traps are detrimental to the thermal stability. The thermogravimetric analysis does not show a decomposition for any of the materials in the temperature range relevant for operation. The perovskite alloys do not have this phase transition, resulting in effectively suppressed formation of carrier traps. PSCs with improved thermal stability under the standard thermal cycling test are demonstrated.

| S-EPMC6325570 | biostudies-literature

Engineering fluorinated-cation containing inverted perovskite solar cells with an efficiency of >21% and improved stability towards humidity.

Project description:Efficient and stable perovskite solar cells with a simple active layer are desirable for manufacturing. Three-dimensional perovskite solar cells are most efficient but need to have improved environmental stability. Inclusion of larger ammonium salts has led to a trade-off between improved stability and efficiency, which is attributed to the perovskite films containing a two-dimensional component. Here, we show that addition of 0.3 mole percent of a fluorinated lead salt into the three-dimensional methylammonium lead iodide perovskite enables low temperature fabrication of simple inverted solar cells with a maximum power conversion efficiency of 21.1%. The perovskite layer has no detectable two-dimensional component at salt concentrations of up to 5 mole percent. The high concentration of fluorinated material found at the film-air interface provides greater hydrophobicity, increased size and orientation of the surface perovskite crystals, and unencapsulated devices with increased stability to high humidity.

| S-EPMC7782759 | biostudies-literature

Spacer layer design for efficient fully printable mesoscopic perovskite solar cells.

Project description:The spacer layer is a key component of fully printable mesoscopic perovskite solar cells, but its precise characteristics are far from being understood in relation to the device design. In the present work, we perform a detailed systematic study on the effects of spacer parameters, such as size of building blocks, layer thickness, etc., on properties of the perovskite filler, insulating ability and performance of fully printable mesoscopic perovskite solar cells by combining the techniques of time-resolved photoluminescence, high-resolution TEM, insulating resistance measurements, impedance spectroscopy and J-V characteristics. Drawing on the deep understanding from these studies, we formulate key principles, which are anticipated to guide the design of the advanced spacer layer for fully printable mesoscopic perovskite solar cells.

| S-EPMC9072001 | biostudies-literature

Long-Term Stability Analysis of 3D and 2D/3D Hybrid Perovskite Solar Cells Using Electrochemical Impedance Spectroscopy.

Project description:Despite the remarkable progress in perovskite solar cells (PSCs), their instability and rapid degradation over time still restrict their commercialization. A 2D capping layer has been proved to overcome the stability issues; however, an in-depth understanding of the complex degradation processes over a prolonged time at PSC interfaces is crucial for improving their stability. In the current work, we investigated the stability of a triple cation 3D ([(FA0.83MA0.17)Cs0.05]Pb(I0.83Br0.17)3) and 2D/3D PSC fabricated by a layer-by-layer deposition technique (PEAI-based 2D layer over triple cation 3D perovskite) using a state-of-art characterization technique: electrochemical impedance spectroscopy (EIS). A long-term stability test over 24 months was performed on the 3D and 2D/3D PSCs with an initial PCE of 18.87% and 20.21%, respectively, to suggest a more practical scenario. The current-voltage (J-V) and EIS results showed degradation in both the solar cell types; however, a slower degradation rate was observed in 2D/3D PSCs. Finally, the quantitative analysis of the key EIS parameters affected by the degradation in 3D and 2D/3D PSCs were discussed.

| S-EPMC7763814 | biostudies-literature

Thermal Stability of RNA Structures with Bulky Cations in Mixed Aqueous Solutions.

Project description:Bulky cations are used to develop nucleic-acid-based technologies for medical and technological applications in which nucleic acids function under nonaqueous conditions. In this study, the thermal stability of RNA structures was measured in the presence of various bulky cations in aqueous mixtures with organic solvents or polymer additives. The stability of oligonucleotide, transfer RNA, and polynucleotide structures was decreased in the presence of salts of tetrabutylammonium and tetrapentylammonium ions, and the stability and salt concentration dependences were dependent on cation sizes. The degree to which stability was dependent on salt concentration was correlated with reciprocals of the dielectric constants of mixed solutions, regardless of interactions between the cosolutes and RNA. Our results show that organic solvents affect the strength of electrostatic interactions between RNA and cations. Analysis of ion binding to RNA indicated greater enhancement of cation binding to RNA single strands than to duplexes in media with low dielectric constants. Furthermore, background bulky ions changed the dependence of RNA duplex stability on the concentration of metal ion salts. These unique properties of large tetraalkylammonium ions are useful for controlling the stability of RNA structures and its sensitivity to metal ion salts.

| S-EPMC5052467 | biostudies-literature

One-Year stable perovskite solar cells by 2D/3D interface engineering.

Project description:Despite the impressive photovoltaic performances with power conversion efficiency beyond 22%, perovskite solar cells are poorly stable under operation, failing by far the market requirements. Various technological approaches have been proposed to overcome the instability problem, which, while delivering appreciable incremental improvements, are still far from a market-proof solution. Here we show one-year stable perovskite devices by engineering an ultra-stable 2D/3D (HOOC(CH2)4NH3)2PbI4/CH3NH3PbI3 perovskite junction. The 2D/3D forms an exceptional gradually-organized multi-dimensional interface that yields up to 12.9% efficiency in a carbon-based architecture, and 14.6% in standard mesoporous solar cells. To demonstrate the up-scale potential of our technology, we fabricate 10 × 10?cm2 solar modules by a fully printable industrial-scale process, delivering 11.2% efficiency stable for >10,000?h with zero loss in performances measured under controlled standard conditions. This innovative stable and low-cost architecture will enable the timely commercialization of perovskite solar cells.

| S-EPMC5461484 | biostudies-literature

Inverted perovskite solar cells with enhanced lifetime and thermal stability enabled by a metallic tantalum disulfide buffer layer.

Project description:Perovskite solar cells (PSCs) have proved their potential for delivering high power conversion efficiencies (PCE) alongside low fabrication cost and high versatility. The stability and the PCE of PSCs can readily be improved by implementing engineering approaches that entail the incorporation of two-dimensional (2D) materials across the device's layered configuration. In this work, two-dimensional (2D) 6R-TaS2 flakes were exfoliated and incorporated as a buffer layer in inverted PSCs, enhancing the device's PCE, lifetime and thermal stability. A thin buffer layer of 6R-TaS2 flakes was formed on top of the electron transport layer to facilitate electron extraction, thus improving the overall device performance. The optimized devices reach a PCE of 18.45%, representing a 12% improvement compared to the reference cell. The lifetime stability measurements of the devices under ISOS-L2, ISOS-D1, ISOS-D1I and ISOS-D2I protocols revealed that the TaS2 buffer layer retards the intrinsic, thermally activated degradation processes of the PSCs. Notably, the devices retain more than the 80% of their initial PCE over 330 h under continuous 1 Sun illumination at 65 °C.

| S-EPMC9419768 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data