Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrochemical Discrimination of Salbutamol from Its Excipients in Ventolin^TM at Nanoporous Gold Microdisc Arrays.

ABSTRACT: The emergence of specific drug-device combination products in the inhalable pharmaceutical industry demands more sophistication of device functionality in the form of an embedded sensing platform to increase patient safety and extend patent coverage. Controlling the nebuliser function at a miniaturised, integrated electrochemical sensing platform with rapid response time and supporting novel algorithms could deliver such a technology offering. Development of a nanoporous gold (NPG) electrochemical sensor capable of creating a unique fingerprint signal generated by inhalable pharmaceuticals provided the impetus for our study of the electrooxidation of salbutamol, which is the active bronchodilatory ingredient in Ventolin^TM formulations. It was demonstrated that, at NPG-modified microdisc electrode arrays, salbutamol is distinguishable from the chloride excipient present at 0.0154 M using linear sweep voltammetry and can be detected amperometrically. In contrast, bare gold microdisc electrode arrays cannot afford such discrimination, as the potential for salbutamol oxidation and chloride adsorption reactions overlap. The discriminative power of NPG originates from the nanoconfinement effect for chloride in the internal pores of NPG, which selectively enhances the electron transfer kinetics of this more sluggish reaction relative to that of the faster, diffusion-controlled salbutamol oxidation. Sensing was performed at a fully integrated three-electrode cell-on-chip using Pt as a quasi-reference electrode.

SUBMITTER: Nagle LC

PROVIDER: S-EPMC8226559 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ordered arrays of nanoporous gold nanoparticles.

Project description:A combination of a "top-down" approach (substrate-conformal imprint lithography) and two "bottom-up" approaches (dewetting and dealloying) enables fabrication of perfectly ordered 2-dimensional arrays of nanoporous gold nanoparticles. The dewetting of Au/Ag bilayers on the periodically prepatterned substrates leads to the interdiffusion of Au and Ag and the formation of an array of Au-Ag alloy nanoparticles. The array of alloy nanoparticles is transformed into an array of nanoporous gold nanoparticles by a following dealloying step. Large areas of this new type of material arrangement can be realized with this technique. In addition, this technique allows for the control of particle size, particle spacing, and ligament size (or pore size) by varying the period of the structure, total metal layer thickness, and the thickness ratio of the as-deposited bilayers.

| S-EPMC3458611 | biostudies-literature

Electrochemical tuning of the optical properties of nanoporous gold.

Project description:Using optical in-situ measurements in an electrochemical environment, we study the electrochemical tuning of the transmission spectrum of films from the nanoporous gold (NPG) based optical metamaterial, including the effect of the ligament size. The long wavelength part of the transmission spectrum around 800?nm can be reversibly tuned via the applied electrode potential. The NPG behaves as diluted metal with its transition from dielectric to metallic response shifted to longer wavelengths. We find that the applied potential alters the charge carrier density to a comparable extent as in experiments on gold nanoparticles. However, compared to nanoparticles, a NPG optical metamaterial, due to its connected structure, shows a much stronger and more broadband change in optical transmission for the same change in charge carrier density. We were able to tune the transmission through an only 200?nm thin sample by 30%. In combination with an electrolyte the tunable NPG based optical metamaterial, which employs a very large surface-to-volume ratio is expected to play an important role in sensor applications, for photoelectrochemical water splitting into hydrogen and oxygen and for solar water purification.

| S-EPMC5343422 | biostudies-literature

Electrochemical Behavior of Nanoporous Gold/Polypyrrole Supercapacitor under Deformation.

Project description:Due to the high demand of wearable electronics, flexible supercapacitors have been extensively developed in recent years. Yet, the effect of deformation in the interior electrode material suffered in practical applications on the performance received less attention. Here, we study the electrochemical behavior of macroscopic nanoporous gold/polypyrrole (NPG/PPy) in situ under compression deformation. Dealloying-driven NPG, a network constructed by bi-continuous nano-scaled ligaments and pores, can serve as a compression-tolerant substrate for PPy supercapacitor material. The electrochemical capacitance of NPG/PPy subjected to compression deformation is revealed to decrease at the scan rates and discharge current densities applied in this work. At the same time, the charge transfer resistance of NPG/PPy is found to increase. This electrochemical behavior is due to the locally reduced mass transport of electrolyte caused by the formation of new connections between the neighboring ligaments under the application of compression loads. The fundamental understanding of the effect of deformation on the performance of energy storage materials revealed in this study paves the way for their practical application in wearable devices.

| S-EPMC9267961 | biostudies-literature

Electrochemical annealing of nanoporous gold by application of cyclic potential sweeps.

Project description:An electrochemical method for annealing the pore sizes of nanoporous gold (NPG) is reported. The pore sizes of NPG can be increased by electrochemical cycling with the upper potential limit being just at the onset of gold oxide formation. This study has been performed in electrolyte solutions including potassium chloride, sodium nitrate and sodium perchlorate. Scanning electron microscopy images have been used for ligament and pore size analysis. We examine the modifications of NPG due to annealing using electrochemical impedance spectroscopy, and cyclic voltammetry and offer a comparison of the surface coverage using the gold oxide stripping method as well as the method in which electrochemically accessible surface area is determined by using a diffusing redox probe. The effect of additives adsorbed on the NPG surface when subjected to annealing in different electrolytes as well as the subsequent structural changes in NPG are also reported. The effect of the annealing process on the application of NPG as a substrate for glucose electro-oxidation is briefly examined.

| S-EPMC4350776 | biostudies-literature

Microneedle-based nanoporous gold electrochemical sensor for real-time catecholamine detection.

Project description:Dopamine (DA), epinephrine (EP), and norepinephrine (NEP) are the main catecholamine of clinical interest, as they play crucial roles in the regulation of nervous and cardiovascular systems and are involved in some brain behaviors, such as stress, panic, anxiety, and depression. Therefore, there is an urgent need for a reliable sensing device able to provide their continuous monitoring in a minimally invasive manner. In this work, the first highly nanoporous gold (h-nPG) microneedle-based sensor is presented for continuous monitoring of catecholamine in interstitial fluid (ISF). The h-nPG microneedle-based gold electrode was prepared by a simple electrochemical self-templating method that involves two steps, gold electrodeposition and hydrogen bubbling at the electrode surface, realized by sweeping the potential between + 0.8 V and 0 V vs Ag/AgCl for 25 scans in a 10 mM HAuCl4 solution containing 2.5 M NH4Cl, and successively applying a fixed potential of - 2 V vs Ag/AgCl for 60 s. The resulting microneedle-based h-nPG sensor displays an interference-free total catecholamine detection expressed as NEP concentration, with a very low LOD of 100 nM, excellent sensitivity and stability, and fast response time (< 4 s). The performance of the h-nPG microneedle array sensor was successively assessed in artificial ISF and in a hydrogel skin model at typical physiological concentrations.

| S-EPMC8989844 | biostudies-literature

Anomalous Trends in Nucleic Acid-Based Electrochemical Biosensors with Nanoporous Gold Electrodes.

Project description:Molecular diagnostics have significantly advanced the early detection of diseases, where electrochemical sensing of biomarkers has shown considerable promise. For a nucleic acid-based electrochemical sensor with signal-off behavior, the performance is evaluated by percent signal suppression (% ss), which indicates the change in current after hybridization. The % ss is generally due to more redox molecules (e.g., methylene blue) associating with the probe DNA bases in the single-strand form than the double-strand form upon hybridization with the target nucleic acid. Nanostructured electrodes generally enhance electrochemical sensor performance via several mechanisms, including increased number of capture probes per electrode volume and unique nanoscale transport phenomena. Here, we employ nanoporous gold (np-Au) as a model electrode material to study the influence of probe immobilization solution concentration on sensor performance and the underlying mechanisms. Unlike planar gold (pl-Au) electrodes, where % ss reaches a steady state with increasing concentration of the grafting solution, the % ss displays peak performance at certain grafting solution concentrations followed by rapid deterioration and reversal of the % ss polarity, suggesting an unexpected case of increased charge transfer upon hybridization. Fluorometric assessments of electrochemically desorbed nucleic acids for different electrode morphologies reveal that a significant amount of DNA molecules (unhybridized and hybridized) remain within the nanopores posthybridization. Analysis of electrochemical signals (e.g., square wave voltammogram shape) suggests that the large unbound nucleic acid concentration may be altering the modes of methylene blue interaction with the nucleic acids and charge transfer to the electrode surfaces.

| S-EPMC6751010 | biostudies-literature

Surface Defects Improved SERS Activity of Nanoporous Gold Prepared by Electrochemical Dealloying

Project description:Nanoporous metals possess excellent catalytic and optical properties that are related with surface morphology. Here, we modulated the ligament surface of nanoporous gold (NPG) by controlling electrochemical dealloying and obtained NPG with an improved enhancement of its surface-enhanced Raman scattering (SERS) property. We found that both high-density atomic steps and kinks on the curved surfaces and high-content silver atoms close to the ligament surface contributed to the high SERS ability. The presented strategy will be useful for the fabrication of nanoporous metal with an excellent surface that is needed for sensing, conversion, and catalytic.

| S-EPMC9824599 | biostudies-literature

Electrochemical detection of dopamine using periodic cylindrical gold nanoelectrode arrays.

Project description:Dopamine is a key molecule in neurotransmission and has been known to be responsible for several neurological diseases. Hence, its sensitive and selective detection is important for the early diagnosis of diseases related to abnormal levels of dopamine. In this study, we reported a new cylindrical gold nanoelectrode (CAuNE) platform fabricated via sequential laser interference lithography and electrochemical deposition. Among the fabricated electrodes, CAuNEs with a diameter of 700 nm, 150 s deposited, was found to be the best for electrochemical dopamine detection. According to cyclic voltammetry results, the linear range of the CAuNE-700 nm was 1-100 µM of dopamine with a limit of detection (LOD) of 5.83 µM. Moreover, owing to the homogeneous periodic features of CAuNEs, human neural cells were successfully cultured and maintained for more than 5 days in vitro without the use of any extracellular matrix proteins and dopamine was detectable in the presence of these cells on the electrode. Therefore, we concluded that the developed dopamine sensing platform CAuNE can be used for many applications including early diagnosis of neurological diseases; function tests of dopaminergic neurons derived from various stem cell sources; and toxicity assessments of drugs, chemicals, and nanomaterials on human neuronal cells.

| S-EPMC6145913 | biostudies-literature

Molecularly imprinted polymer decorated nanoporous gold for highly selective and sensitive electrochemical sensors.

Project description:Electrochemical nanosensors based on nanoporous gold leaf (NPGL) and molecularly imprinted polymer (MIP) are developed for pharmaceutical analysis by using metronidazole (MNZ) as a model analyte. NPGL, serving as the loading platform for MIP immobilization, possesses large accessible surface area with superb electric conductivity, while electrochemically synthesized MIP thin layer affords selectivity for specific recognition of MNZ molecules. For MNZ determination, the hybrid electrode shows two dynamic linear range of 5 × 10(-11) to 1 × 10(-9) mol L(-1) and 1 × 10(-9) to 1.4 × 10(-6) mol L(-1) with a remarkably low detection limit of 1.8 × 10(-11) mol L(-1) (S/N = 3). In addition, the sensor exhibits high binding affinity and selectivity towards MNZ with excellent reproducibility and stability. Finally, the reliability of MIP-NPGL for MNZ detection is proved in real fish tissue samples, demonstrating the potential for the proposed electrochemical sensors in monitoring drug and biological samples.

| S-EPMC4287724 | biostudies-other

From Chip Size to Wafer-Scale Nanoporous Gold Reliable Fabrication Using Low Currents Electrochemical Etching.

Project description:We report a simple, scalable route to wafer-size processing for fabrication of tunable nanoporous gold (NPG) by the anodization process at low constant current in a solution of hydrofluoric acid and dimethylformamide. Microstructural, optical, and electrochemical investigations were employed for a systematic analysis of the sample porosity evolution while increasing the anodization duration, namely the small angle X-ray scattering (SAXS) technique and electrochemical impedance spectroscopy (EIS). Whereas the SAXS analysis practically completes the scanning electronic microscopy (SEM) investigations and provides data about the impact of the etching time on the nanoporous gold layers in terms of fractal dimension and average pore surface area, the EIS analysis was used to estimate the electroactive area, the associated roughness factor, as well as the heterogeneous electron transfer rate constant. The bridge between the analyses is made by the scanning electrochemical microscopy (SECM) survey, which practically correlates the surface morphology with the electrochemical activity. The results were correlated to endorse the control over the gold film nanostructuration process deposited directly on the substrate that can be further subjected to different technological processes, retaining its properties. The results show that the anodization duration influences the surface area, which subsequently modifies the properties of NPG, thus enabling tuning the samples for specific applications, either optical or chemical.

| S-EPMC7700230 | biostudies-literature