Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improved Device Distribution in High-Performance SiN_x Resistive Random Access Memory via Arsenic Ion Implantation.

ABSTRACT: Large device variation is a fundamental challenge for resistive random access memory (RRAM) array circuit. Improved device-to-device distributions of set and reset voltages in a SiN_x RRAM device is realized via arsenic ion (As⁺) implantation. Besides, the As⁺-implanted SiN_x RRAM device exhibits much tighter cycle-to-cycle distribution than the nonimplanted device. The As⁺-implanted SiN_x device further exhibits excellent performance, which shows high stability and a large 1.73 × 10³ resistance window at 85 °C retention for 10⁴ s, and a large 10³ resistance window after 10⁵ cycles of the pulsed endurance test. The current-voltage characteristics of high- and low-resistance states were both analyzed as space-charge-limited conduction mechanism. From the simulated defect distribution in the SiN_x layer, a microscopic model was established, and the formation and rupture of defect-conductive paths were proposed for the resistance switching behavior. Therefore, the reason for such high device performance can be attributed to the sufficient defects created by As⁺ implantation that leads to low forming and operation power.

SUBMITTER: Yen TJ

PROVIDER: S-EPMC8226572 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

a-SiNx:H-based ultra-low power resistive random access memory with tunable Si dangling bond conduction paths.

Project description:The realization of ultra-low power Si-based resistive switching memory technology will be a milestone in the development of next generation non-volatile memory. Here we show that a high performance and ultra-low power resistive random access memory (RRAM) based on an Al/a-SiNx:H/p(+)-Si structure can be achieved by tuning the Si dangling bond conduction paths. We reveal the intrinsic relationship between the Si dangling bonds and the N/Si ratio x for the a-SiNx:H films, which ensures that the programming current can be reduced to less than 1 μA by increasing the value of x. Theoretically calculated current-voltage (I-V) curves combined with the temperature dependence of the I-V characteristics confirm that, for the low-resistance state (LRS), the Si dangling bond conduction paths obey the trap-assisted tunneling model. In the high-resistance state (HRS), conduction is dominated by either hopping or Poole-Frenkel (P-F) processes. Our introduction of hydrogen in the a-SiNx:H layer provides a new way to control the Si dangling bond conduction paths, and thus opens up a research field for ultra-low power Si-based RRAM.

| S-EPMC4623785 | biostudies-other

Improved Intrinsic Nonlinear Characteristics of Ta2O5/Al2O3-Based Resistive Random-Access Memory for High-Density Memory Applications.

Project description:The major hindrance for high-density application of two-terminal resistive random-access memory (RRAM) array design is unintentional sneak path leakage through adjacent cells. Herein, we propose a bilayer structure of Ta2O5/Al2O3-based bipolar type RRAM by evaluating the intrinsic nonlinear characteristics without integration with an additional transistor and selector device. We conducted X-ray photoelectron spectroscopy (XPS) analysis with different etching times to verify Ta2O5/Al2O3 layers deposited on the TiN bottom electrode. The optimized nonlinear properties with current suppression are obtained by varying Al2O3 thickness. The maximum nonlinearity (~71) is achieved in a Ta2O5/Al2O3 (3 nm) sample. Furthermore, we estimated the comparative read margin based on the I-V characteristics with different thicknesses of Al2O3 film for the crossbar array applications. We expect that this study about the effect of the Al2O3 tunnel barrier thickness on Ta2O5-based memristors could provide a guideline for developing a selector-less RRAM application.

| S-EPMC7560462 | biostudies-literature

Short-Term Memory Dynamics of TiN/Ti/TiO2/SiOx/Si Resistive Random Access Memory.

Project description:In this study, we investigated the synaptic functions of TiN/Ti/TiO2/SiOx/Si resistive random access memory for a neuromorphic computing system that can act as a substitute for the von-Neumann computing architecture. To process the data efficiently, it is necessary to coordinate the information that needs to be processed with short-term memory. In neural networks, short-term memory can play the role of retaining the response on temporary spikes for information filtering. In this study, the proposed complementary metal-oxide-semiconductor (CMOS)-compatible synaptic device mimics the potentiation and depression with varying pulse conditions similar to biological synapses in the nervous system. Short-term memory dynamics are demonstrated through pulse modulation at a set pulse voltage of -3.5 V and pulse width of 10 ms and paired-pulsed facilitation. Moreover, spike-timing-dependent plasticity with the change in synaptic weight is performed by the time difference between the pre- and postsynaptic neurons. The SiOx layer as a tunnel barrier on a Si substrate provides highly nonlinear current-voltage (I-V) characteristics in a low-resistance state, which is suitable for high-density synapse arrays. The results herein presented confirm the viability of implementing a CMOS-compatible neuromorphic chip.

| S-EPMC7559005 | biostudies-literature

Detection of bovine serum albumin using hybrid TiO2 + graphene oxide based Bio - resistive random access memory device.

Project description:Bio - molecules detection and their quantification with a high precision is essential in modern era of medical diagnostics. In this context, the memristor device which can change its resistance state is a promising technique to sense the bio - molecules. In this work, detection of the Bovine Serum Albumin (BSA) protein using resistive switching memristors based on TiO2 and TiO2?+?graphene oxide (GO) is explored. The sensitivity of BSA detection is found to be 4?mg/mL. Both the devices show an excellent bipolar resistive switching with an on/off ratio of 73 and 100 respectively, which essentially demonstrates that the device with GO, distinguishes the resistance states with a high precision. The enhanced performance in the GO inserted device (~?650 cycles) is attributed to the prevention of multi-dimensional and random growth of conductive paths.

| S-EPMC6834672 | biostudies-literature

Sustained Resistive Switching in a Single Cu:7,7,8,8-tetracyanoquinodimethane Nanowire: A Promising Material for Resistive Random Access Memory.

Project description:We report a new type of sustained and reversible unipolar resistive switching in a nanowire device made from a single strand of Cu:7,7,8,8-tetracyanoquinodimethane (Cu:TCNQ) nanowire (diameter <100?nm) that shows high ON/OFF ratio (~10(3)), low threshold voltage of switching (~3.5?V) and large cycling endurance (>10(3)). This indicates a promising material for high density resistive random access memory (ReRAM) device integration. Switching is observed in Cu:TCNQ single nanowire devices with two different electrode configuration: symmetric (C-Pt/Cu:TCNQ/C-Pt) and asymmetric (Cu/Cu:TCNQ/C-Pt), where contacts connecting the nanowire play an important role. This report also developed a method of separating out the electrode and material contributions in switching using metal-semiconductor-metal (MSM) device model along with a direct 4-probe resistivity measurement of the nanowire in the OFF as well as ON state. The device model was followed by a phenomenological model of current transport through the nanowire device which shows that lowering of potential barrier at the contacts likely occur due to formation of Cu filaments in the interface between nanowire and contact electrodes. We obtain quantitative agreement of numerically analyzed results with the experimental switching data.

| S-EPMC4887791 | biostudies-literature

Modeling of electron conduction in contact resistive random access memory devices as random telegraph noise.

Project description:The intense development and study of resistive random access memory (RRAM) devices has opened a new era in semiconductor memory manufacturing. Resistive switching and carrier conduction inside RRAM films have become critical issues in recent years. Electron trapping/detrapping behavior is observed and investigated in the proposed contact resistive random access memory (CR-RAM) cell. Through the fitting of the space charge limiting current (SCLC) model, and analysis in terms of the random telegraph noise (RTN) model, the temperature-dependence of resistance levels and the high-temperature data retention behavior of the contact RRAM film are successfully and completely explained. Detail analyses of the electron capture and emission from the traps by forward and reverse read measurements provide further verifications for hopping conduction mechanism and current fluctuation discrepancies.

| S-EPMC3331868 | biostudies-other

Unraveling the Role of Polydopamines in Resistive Switching in Al/Polydopamine/Al Structure for Organic Resistive Random-Access Memory.

Project description:In an era of rapidly evolving artificial intelligence and 5G communications technologies, massive data storage and processing are required for the real-time operation of digital processors in conventional wearable devices. However, classical von-Neumann architecture computers are limited by bottleneck-related issues. As a solution, resistive random-access memory (RRAM) devices are being considered as next generation in-memory computing devices. Among various materials, a polydopamine (PDA) is an attractive candidate for the fabrication of wearable and flexible RRAM devices. Herein, an aluminum/PDA/aluminum structure is proposed to investigate the influence of the PDA layer on resistive switching. The resistance-switching characteristics of an Al/PDA/Al structure are investigated by changing the PDA's coating time and an on/off ratio of 2.48 × 103 is recorded. X-ray photoelectron spectroscopy reveals the presence of an Al2O3 layer in Al/PDA/Al structure, and the contents of oxygen vacancies are changed according to PDA coating time. Conductive filaments in the PDA/Al structure are confirmed by conductive atomic-force microscopy. As an application, a flexible Al/PDA/Al structure is fabricated using polyethylene terephthalate substrate and its operation is successfully confirmed. These results describe the resistive-switching characteristics, including oxygen vacancies, of Al/PDA/Al structures and provide new ways of understanding the resistive-switching mechanism of PDA-based RRAM devices.

| S-EPMC9332170 | biostudies-literature

Low-Power Resistive Switching Characteristic in HfO2/TiOx Bi-Layer Resistive Random-Access Memory.

Project description:Resistive random-access memory devices with atomic layer deposition HfO2 and radio frequency sputtering TiOx as resistive switching layers were fabricated successfully. Low-power characteristic with 1.52 μW set power (1 μA@1.52 V) and 1.12 μW reset power (1 μA@1.12 V) was obtained in the HfO2/TiOx resistive random-access memory (RRAM) devices by controlling the oxygen content of the TiOx layer. Besides, the influence of oxygen content during the TiOx sputtering process on the resistive switching properties would be discussed in detail. The investigations indicated that "soft breakdown" occurred easily during the electrical forming/set process in the HfO2/TiOx RRAM devices with high oxygen content of the TiOx layer, resulting in high resistive switching power. Low-power characteristic was obtained in HfO2/TiOx RRAM devices with appropriately high oxygen vacancy density of TiOx layer, suggesting that the appropriate oxygen vacancy density in the TiOx layer could avoid "soft breakdown" through the whole dielectric layers during forming/set process, thus limiting the current flowing through the RRAM device and decreasing operating power consumption.

| S-EPMC6509306 | biostudies-literature

Improved Stability and Controllability in ZrN-Based Resistive Memory Device by Inserting TiO2 Layer.

Project description:In this work, the enhanced resistive switching of ZrN-based resistive switching memory is demonstrated by embedding TiO2 layer between Ag top electrode and ZrN switching layer. The Ag/ZrN/n-Si device exhibits unstable resistive switching as a result of the uncontrollable Ag migration. Both unipolar and bipolar resistive switching with high RESET current were observed. Negative-SET behavior in the Ag/ZrN/n-Si device makes set-stuck, causing permanent resistive switching failure. On the other hand, the analogue switching in the Ag/TiO2/ZrN/n-Si device, which could be adopted for the multi-bit data storage applications, is obtained. The gradual switching in Ag/TiO2/ZrN/n-Si device is achieved, possibly due to the suppressed Ag diffusion caused by TiO2 inserting layer. The current-voltage (I-V) switching characteristics of Ag/ZrN/n-Si and Ag/TiO2/ZrN/n-Si devices can be well verified by pulse transient. Finally, we established that the Ag/TiO2/ZrN/n-Si device is suitable for neuromorphic application through a comparison study of conductance update. This paper paves the way for neuromorphic application in nitride-based memristor devices.

| S-EPMC7600328 | biostudies-literature

A Novel Read Scheme for Large Size One-Resistor Resistive Random Access Memory Array.

Project description:The major issue of RRAM is the uneven sneak path that limits the array size. For the first time record large One-Resistor (1R) RRAM array of 128x128 is realized, and the array cells at the worst case still have good Low-/High-Resistive State (LRS/HRS) current difference of 378?nA/16?nA, even without using the selector device. This array has extremely low read current of 9.7??A due to both low-current RRAM device and circuit interaction, where a novel and simple scheme of a reference point by half selected cell and a differential amplifier (DA) were implemented in the circuit design.

| S-EPMC5301214 | biostudies-other