Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Detection of bovine serum albumin using hybrid TiO₂ + graphene oxide based Bio - resistive random access memory device.

ABSTRACT: Bio - molecules detection and their quantification with a high precision is essential in modern era of medical diagnostics. In this context, the memristor device which can change its resistance state is a promising technique to sense the bio - molecules. In this work, detection of the Bovine Serum Albumin (BSA) protein using resistive switching memristors based on TiO₂ and TiO₂?+?graphene oxide (GO) is explored. The sensitivity of BSA detection is found to be 4?mg/mL. Both the devices show an excellent bipolar resistive switching with an on/off ratio of 73 and 100 respectively, which essentially demonstrates that the device with GO, distinguishes the resistance states with a high precision. The enhanced performance in the GO inserted device (~?650 cycles) is attributed to the prevention of multi-dimensional and random growth of conductive paths.

SUBMITTER: Sahu DP

PROVIDER: S-EPMC6834672 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Detection of bovine serum albumin using hybrid TiO2 + graphene oxide based Bio - resistive random access memory device.

Sahu Dwipak Prasad DP Jammalamadaka S Narayana SN

Scientific reports 20191106 1

Bio - molecules detection and their quantification with a high precision is essential in modern era of medical diagnostics. In this context, the memristor device which can change its resistance state is a promising technique to sense the bio - molecules. In this work, detection of the Bovine Serum Albumin (BSA) protein using resistive switching memristors based on TiO2 and TiO2 + graphene oxide (GO) is explored. The sensitivity of BSA detection is found to be 4 mg/mL. Both ...[more]

PMID: 31695093

Similar Datasets

Low-Power Resistive Switching Characteristic in HfO2/TiOx Bi-Layer Resistive Random-Access Memory.

Project description:Resistive random-access memory devices with atomic layer deposition HfO2 and radio frequency sputtering TiOx as resistive switching layers were fabricated successfully. Low-power characteristic with 1.52 μW set power (1 μA@1.52 V) and 1.12 μW reset power (1 μA@1.12 V) was obtained in the HfO2/TiOx resistive random-access memory (RRAM) devices by controlling the oxygen content of the TiOx layer. Besides, the influence of oxygen content during the TiOx sputtering process on the resistive switching properties would be discussed in detail. The investigations indicated that "soft breakdown" occurred easily during the electrical forming/set process in the HfO2/TiOx RRAM devices with high oxygen content of the TiOx layer, resulting in high resistive switching power. Low-power characteristic was obtained in HfO2/TiOx RRAM devices with appropriately high oxygen vacancy density of TiOx layer, suggesting that the appropriate oxygen vacancy density in the TiOx layer could avoid "soft breakdown" through the whole dielectric layers during forming/set process, thus limiting the current flowing through the RRAM device and decreasing operating power consumption.

| S-EPMC6509306 | biostudies-literature

Improved Device Distribution in High-Performance SiNx Resistive Random Access Memory via Arsenic Ion Implantation.

Project description:Large device variation is a fundamental challenge for resistive random access memory (RRAM) array circuit. Improved device-to-device distributions of set and reset voltages in a SiNx RRAM device is realized via arsenic ion (As+) implantation. Besides, the As+-implanted SiNx RRAM device exhibits much tighter cycle-to-cycle distribution than the nonimplanted device. The As+-implanted SiNx device further exhibits excellent performance, which shows high stability and a large 1.73 × 103 resistance window at 85 °C retention for 104 s, and a large 103 resistance window after 105 cycles of the pulsed endurance test. The current-voltage characteristics of high- and low-resistance states were both analyzed as space-charge-limited conduction mechanism. From the simulated defect distribution in the SiNx layer, a microscopic model was established, and the formation and rupture of defect-conductive paths were proposed for the resistance switching behavior. Therefore, the reason for such high device performance can be attributed to the sufficient defects created by As+ implantation that leads to low forming and operation power.

| S-EPMC8226572 | biostudies-literature

Multi-level characteristics of TiOx transparent non-volatile resistive switching device by embedding SiO2 nanoparticles.

Project description:TiOx-based resistive switching devices have recently attracted attention as a promising candidate for next-generation non-volatile memory devices. A number of studies have attempted to increase the structural density of resistive switching devices. The fabrication of a multi-level switching device is a feasible method for increasing the density of the memory cell. Herein, we attempt to obtain a non-volatile multi-level switching memory device that is highly transparent by embedding SiO2 nanoparticles (NPs) into the TiOx matrix (TiOx@SiO2 NPs). The fully transparent resistive switching device is fabricated with an ITO/TiOx@SiO2 NPs/ITO structure on glass substrate, and it shows transmittance over 95% in the visible range. The TiOx@SiO2 NPs device shows outstanding switching characteristics, such as a high on/off ratio, long retention time, good endurance, and distinguishable multi-level switching. To understand multi-level switching characteristics by adjusting the set voltages, we analyze the switching mechanism in each resistive state. This method represents a promising approach for high-performance non-volatile multi-level memory applications.

| S-EPMC8110581 | biostudies-literature

Resistive Switching of Sub-10 nm TiO? Nanoparticle Self-Assembled Monolayers.

Project description:Resistively switching devices are promising candidates for the next generation of non-volatile data memories. Such devices are up to now fabricated mainly by means of top-down approaches that apply thin films sandwiched between electrodes. Recent works have demonstrated that resistive switching (RS) is also feasible on chemically synthesized nanoparticles (NPs) in the 50 nm range. Following this concept, we developed this approach further to the sub-10 nm range. In this work, we report RS of sub-10 nm TiO? NPs that were self-assembled into monolayers and transferred onto metallic substrates. We electrically characterized these monolayers in regard to their RS properties by means of a nanorobotics system in a scanning electron microscope, and found features typical of bipolar resistive switching.

| S-EPMC5707587 | biostudies-literature

Sustained Resistive Switching in a Single Cu:7,7,8,8-tetracyanoquinodimethane Nanowire: A Promising Material for Resistive Random Access Memory.

Project description:We report a new type of sustained and reversible unipolar resistive switching in a nanowire device made from a single strand of Cu:7,7,8,8-tetracyanoquinodimethane (Cu:TCNQ) nanowire (diameter <100?nm) that shows high ON/OFF ratio (~10(3)), low threshold voltage of switching (~3.5?V) and large cycling endurance (>10(3)). This indicates a promising material for high density resistive random access memory (ReRAM) device integration. Switching is observed in Cu:TCNQ single nanowire devices with two different electrode configuration: symmetric (C-Pt/Cu:TCNQ/C-Pt) and asymmetric (Cu/Cu:TCNQ/C-Pt), where contacts connecting the nanowire play an important role. This report also developed a method of separating out the electrode and material contributions in switching using metal-semiconductor-metal (MSM) device model along with a direct 4-probe resistivity measurement of the nanowire in the OFF as well as ON state. The device model was followed by a phenomenological model of current transport through the nanowire device which shows that lowering of potential barrier at the contacts likely occur due to formation of Cu filaments in the interface between nanowire and contact electrodes. We obtain quantitative agreement of numerically analyzed results with the experimental switching data.

| S-EPMC4887791 | biostudies-literature

Modeling of electron conduction in contact resistive random access memory devices as random telegraph noise.

Project description:The intense development and study of resistive random access memory (RRAM) devices has opened a new era in semiconductor memory manufacturing. Resistive switching and carrier conduction inside RRAM films have become critical issues in recent years. Electron trapping/detrapping behavior is observed and investigated in the proposed contact resistive random access memory (CR-RAM) cell. Through the fitting of the space charge limiting current (SCLC) model, and analysis in terms of the random telegraph noise (RTN) model, the temperature-dependence of resistance levels and the high-temperature data retention behavior of the contact RRAM film are successfully and completely explained. Detail analyses of the electron capture and emission from the traps by forward and reverse read measurements provide further verifications for hopping conduction mechanism and current fluctuation discrepancies.

| S-EPMC3331868 | biostudies-other

Unraveling the Role of Polydopamines in Resistive Switching in Al/Polydopamine/Al Structure for Organic Resistive Random-Access Memory.

Project description:In an era of rapidly evolving artificial intelligence and 5G communications technologies, massive data storage and processing are required for the real-time operation of digital processors in conventional wearable devices. However, classical von-Neumann architecture computers are limited by bottleneck-related issues. As a solution, resistive random-access memory (RRAM) devices are being considered as next generation in-memory computing devices. Among various materials, a polydopamine (PDA) is an attractive candidate for the fabrication of wearable and flexible RRAM devices. Herein, an aluminum/PDA/aluminum structure is proposed to investigate the influence of the PDA layer on resistive switching. The resistance-switching characteristics of an Al/PDA/Al structure are investigated by changing the PDA's coating time and an on/off ratio of 2.48 × 103 is recorded. X-ray photoelectron spectroscopy reveals the presence of an Al2O3 layer in Al/PDA/Al structure, and the contents of oxygen vacancies are changed according to PDA coating time. Conductive filaments in the PDA/Al structure are confirmed by conductive atomic-force microscopy. As an application, a flexible Al/PDA/Al structure is fabricated using polyethylene terephthalate substrate and its operation is successfully confirmed. These results describe the resistive-switching characteristics, including oxygen vacancies, of Al/PDA/Al structures and provide new ways of understanding the resistive-switching mechanism of PDA-based RRAM devices.

| S-EPMC9332170 | biostudies-literature

Short-Term Memory Dynamics of TiN/Ti/TiO2/SiOx/Si Resistive Random Access Memory.

Project description:In this study, we investigated the synaptic functions of TiN/Ti/TiO2/SiOx/Si resistive random access memory for a neuromorphic computing system that can act as a substitute for the von-Neumann computing architecture. To process the data efficiently, it is necessary to coordinate the information that needs to be processed with short-term memory. In neural networks, short-term memory can play the role of retaining the response on temporary spikes for information filtering. In this study, the proposed complementary metal-oxide-semiconductor (CMOS)-compatible synaptic device mimics the potentiation and depression with varying pulse conditions similar to biological synapses in the nervous system. Short-term memory dynamics are demonstrated through pulse modulation at a set pulse voltage of -3.5 V and pulse width of 10 ms and paired-pulsed facilitation. Moreover, spike-timing-dependent plasticity with the change in synaptic weight is performed by the time difference between the pre- and postsynaptic neurons. The SiOx layer as a tunnel barrier on a Si substrate provides highly nonlinear current-voltage (I-V) characteristics in a low-resistance state, which is suitable for high-density synapse arrays. The results herein presented confirm the viability of implementing a CMOS-compatible neuromorphic chip.

| S-EPMC7559005 | biostudies-literature

Azurin/CdSe-ZnS-Based Bio-Nano Hybrid Structure for Nanoscale Resistive Memory Device.

Project description:In the present study, we propose a method for bio-nano hybrid formation by coupling a redox metalloprotein, Azurin, with CdSe-ZnS quantum dot for the development of a nanoscale resistive memory device. The covalent interaction between the two nanomaterials enables a strong and effective binding to form an azurin/CdSe-ZnS hybrid, and also enabled better controllability to couple with electrodes to examine the memory function properties. Morphological and optical properties were performed to confirm both hybrid formations and also their individual components. Current-Voltage (I-V) measurements on the hybrid nanostructures exhibited bistable current levels towards the memory function device, that and those characteristics were unnoticeable on individual nanomaterials. The hybrids showed good retention characteristics with high stability and durability, which is a promising feature for future nanoscale memory devices.

| S-EPMC5551846 | biostudies-other

Random Lasing at Localization Transition in a Colloidal Suspension (TiO2@Silica).

Project description:Anderson localization of light and random lasing in this critical regime is an open research frontier, which besides being a basic research topic could also lead to important applications. This article investigates the random laser action at the localization transition in a strongly disordered scattering medium composed of a colloidal suspension of core-shell nanoparticles (TiO2@Silica) in ethanol solution of Rhodamine 6G. The classical superfluorescence band of the random laser was measured separately by collecting the emission at the back of the samples, showing a linear dependence with pumping fluence without gain depletion. However, frontal collection showed saturation of the absorption and emission. Narrow peaks of approximately equal intensity are observed on top of the classical superfluorescence band, indicating suppression of the interaction between the peaks modes. The linewidth of these peaks is lower than that of the passive modes of the scattering medium. A method called fraction of absorbed pumping allowed us to infer that this peak's mode (localized modes) is confined to a shallow region near the input-pumping border.

| S-EPMC6641038 | biostudies-literature