Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

In Situ Regeneration of Copper-Coated Gas Diffusion Electrodes for Electroreduction of CO₂ to Ethylene.

ABSTRACT: A key challenge for carbon dioxide reduction on Cu-based catalysts is its low faradic efficiency (FE) and selectivity towards higher-value products, e.g., ethylene. The main factor limiting the possibilities of long-term applications of Cu-based gas diffusion electrodes (GDE) is a relatively fast drop in the catalytic activity of copper layers. One of the solutions to the catalyst stability problem may be an in situ reconstruction of the catalyst during the process. It was observed that the addition of a small amount of copper lactate to the electrolyte results in increased Faradaic efficiency for ethylene formation. Moreover, the addition of copper lactate increases the lifetime of the catalytic layer ca. two times and stabilizes the Faradaic efficiency of the electroreduction of CO₂ to ethylene at ca. 30%. It can be concluded that in situ deposition of copper through reduction of copper lactate complexes present in the electrolyte provides new, stable, and selective active sites, promoting the reduction of CO₂ to ethylene.

SUBMITTER: Bisztyga-Szklarz M

PROVIDER: S-EPMC8228262 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Nanostructured Copper-Based Electrodes Electrochemically Synthesized on a Carbonaceous Gas Diffusion Membrane with Catalytic Activity for the Electroreduction of CO2.

Project description:In this work, four different 4 cm2-sized nanostructured Cu-based electrocatalysts have been designed by a one-step electrodeposition process of Cu metal on a three-dimensional carbonaceous membrane. One consisted of Cu0, and the other three were obtained by further simple oxidative treatments. Morphological, structural, and electrochemical investigations on the four materials were carried out by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, linear sweep voltammetry, and potential-controlled electrolysis. All the electrocatalysts showed promising catalytic activities toward CO2 electroreduction in liquid phase, with a remarkable selectivity toward acetic acid achieved when using the oxidized materials. In particular, the best electrocatalytic activity was observed for the Cu2O-Cu0 catalyst, working at a relatively low potential (-0.4 V vs RHE), which exhibited a stable and low current density of 0.46 mA cm-2 and a productivity of 308 μmol gcat-1 h-1. These results were attributed to the nanostructured morphology that is characterized by many void spaces and by a high surface area, which should guarantee a large number of CuI and Cu0 catalytic active sites. Moreover, kinetic analyses and preliminary studies about catalyst regeneration highlighted the stability of the best-performing catalyst.

| S-EPMC8662620 | biostudies-literature

B-Cu-Zn Gas Diffusion Electrodes for CO2 Electroreduction to C2+ Products at High Current Densities.

Project description:Electroreduction of CO2 to multi-carbon products has attracted considerable attention as it provides an avenue to high-density renewable energy storage. However, the selectivity and stability under high current densities are rarely reported. Herein, B-doped Cu (B-Cu) and B-Cu-Zn gas diffusion electrodes (GDE) were developed for highly selective and stable CO2 conversion to C2+ products at industrially relevant current densities. The B-Cu GDE exhibited a high Faradaic efficiency of 79 % for C2+ products formation at a current density of -200 mA cm-2 and a potential of -0.45 V vs. RHE. The long-term stability for C2+ formation was substantially improved by incorporating an optimal amount of Zn. Operando Raman spectra confirm the retained Cu+ species under CO2 reduction conditions and the lower overpotential for *OCO formation upon incorporation of Zn, which lead to the excellent conversion of CO2 to C2+ products on B-Cu-Zn GDEs.

| S-EPMC8048895 | biostudies-literature

H2, CO2, ethylene gas recirculation reactor

Project description:RECIRCULATION OF H2, CO2, AND ETHYLENE IMPROVES YIELDS AND CARBON FIXATION OF ANAEROBIC FERMENTATION

| PRJEB41050 | ENA

Toward CO2 Electroreduction under Controlled Mass Flow Conditions: A Combined Inverted RDE and Gas Chromatography Approach.

Project description:The use of rotating disk electrodes (RDEs) is probably the most convenient way of studying simple electrode reactions under well-defined transport conditions. Standard RDEs become, however, less expedient when the studied electrode process is a complex one, leading to the formation of various reaction products. In these cases, the accurate detection and quantification of the formed products are desirable. If the formed products are gaseous, then the usual way of quantifying them is the use of online gas chromatography (GC), a method that is not compatible with open RDE cells. In order to overcome these difficulties, we present here a sophisticated inverted RDE (iRDE) cell design. The design combines various advantages: it is amenable to the same mathematical treatment as standard (downward-facing) RDEs; it can be operated airtight and coupled to online GC; and due to its upward-facing design, the electrode surface is less prone to blockage by any formed gas bubbles. The iRDE&GC design is tested using simple model reactions and is demonstratively used for studying the electrochemical reduction of CO2, accompanied by parasitic hydrogen evolution, on a silver electrode.

| S-EPMC7307836 | biostudies-literature

Gas Diffusion Electrodes on the Electrosynthesis of Controllable Iron Oxide Nanoparticles.

Project description:The electrosynthesis of iron oxide nanoparticles offers a green route, with significant energy and environmental advantages. Yet, this is mostly restricted by the oxygen solubility in the electrolyte. Gas-diffusion electrodes (GDEs) can be used to overcome that limitation, but so far they not been explored for nanoparticle synthesis. Here, we develop a fast, environmentally-friendly, room temperature electrosynthesis route for iron oxide nanocrystals, which we term gas-diffusion electrocrystallization (GDEx). A GDE is used to generate oxidants and hydroxide in-situ, enabling the oxidative synthesis of a single iron salt (e.g., FeCl2) into nanoparticles. Oxygen is reduced to reactive oxygen species, triggering the controlled oxidation of Fe2+ to Fe3+, forming Fe3-xO4-x (0 ≤ x ≤ 1). The stoichiometry and lattice parameter of the resulting oxides can be controlled and predictively modelled, resulting in highly-defective, strain-heavy nanoparticles. The size of the nanocrystals can be tuned from 5 nm to 20 nm, with a large saturation magnetization range (23 to 73 A m2 kg-1), as well as minimal coercivity (~1 kA m-1). Using only air, NaCl, and FeCl2, a biocompatible approach is achieved, besides a remarkable level of control over key parameters, with a view on minimizing the addition of chemicals for enhanced production and applications.

| S-EPMC6814830 | biostudies-literature

Selective electroreduction of CO2 to acetone by single copper atoms anchored on N-doped porous carbon.

Project description:Efficient electroreduction of CO2 to multi-carbon products is a challenging reaction because of the high energy barriers for CO2 activation and C-C coupling, which can be tuned by designing the metal centers and coordination environments of catalysts. Here, we design single atom copper encapsulated on N-doped porous carbon (Cu-SA/NPC) catalysts for reducing CO2 to multi-carbon products. Acetone is identified as the major product with a Faradaic efficiency of 36.7% and a production rate of 336.1??g?h-1. Density functional theory (DFT) calculations reveal that the coordination of Cu with four pyrrole-N atoms is the main active site and reduces the reaction free energies required for CO2 activation and C-C coupling. The energetically favorable pathways for CH3COCH3 production from CO2 reduction are proposed and the origin of selective acetone formation on Cu-SA/NPC is clarified. This work provides insight into the rational design of efficient electrocatalysts for reducing CO2 to multi-carbon products.

| S-EPMC7229121 | biostudies-literature

Cu2O Nanoparticles with Both {100} and {111} Facets for Enhancing the Selectivity and Activity of CO2 Electroreduction to Ethylene.

Project description:Cu2O nanoparticles (NPs) enclosed with different crystal facets, namely, c-Cu2O NPs with {100} facets, o-Cu2O NPs with {111} facets, and t-Cu2O NPs with both {111} and {100} facets, are prepared and their electrocatalytic properties for the reduction of CO2 to C2H4 are evaluated. It is shown that the selectivity and activity of the C2H4 production depend strongly on the crystal facets exposed in Cu2O NPs. The selectivities for the C2H4 production increases in the order, c-Cu2O < o-Cu2O < t-Cu2O, (with FEC2H4 = 38%, 45%, and 59%, respectively). This study suggests that Cu2O NPs are more likely responsible for the selectivity and activity for the C2H4 production than the metallic Cu NPs produced on the surface of Cu2O NPs. This work provides a new route for enhancing the selectivity of the electrocatalytic CO2 reduction by crystal facet engineering.

| S-EPMC7080533 | biostudies-literature

Electroformation of Giant Vesicles on Indium Tin Oxide (ITO)-Coated Poly(ethylene terephthalate) (PET) Electrodes.

Project description:Electroformation of cell-sized lipid membrane vesicles (giant vesicles, GVs) from egg yolk phosphatidylcholine was examined using a poly(ethylene terephthalate) sheet coated with indium tin oxide (ITO-PET) as the electrode material. With sinusoidal ac voltage, GV formation occurred in a similar manner to that on an ITO-glass electrode widely used in electroformation. Difference in the specific electrical resistance of ITO-PET did not significantly affect electroformation. The present results indicate that ITO-PET may be used as more flexible and less expensive electrode material in electroformation. In order to obtain insights into electroformation, other electric voltage forms, static dc and dc pulses, were also tested in place of commonly used sinusoidal ac. Under the present conditions, the best GV formation was observed with dc pulses of negative polarity. The result with static dc demonstrated that the mechanical vibration of swelling lipid seen with sinusoidal ac voltage was not essential for GV formation. On the positive electrode, the electroswelling of lipid mainly yielded non-spherical membranous objects. Pre-application of positive dc voltage on lipid hindered GV formation in electroswelling of the lipid with ac.

| S-EPMC4021930 | biostudies-literature

Cathodized copper porphyrin metal-organic framework nanosheets for selective formate and acetate production from CO2 electroreduction.

Project description:An efficient and selective Cu catalyst for CO2 electroreduction is highly desirable since current catalysts suffer from poor selectivity towards a series of products, such as alkenes, alcohols, and carboxylic acids. Here, we used copper(ii) paddle wheel cluster-based porphyrinic metal-organic framework (MOF) nanosheets for electrocatalytic CO2 reduction and compared them with CuO, Cu2O, Cu, a porphyrin-Cu(ii) complex and a CuO/complex composite. Among them, the cathodized Cu-MOF nanosheets exhibit significant activity for formate production with a faradaic efficiency (FE) of 68.4% at a potential of -1.55 V versus Ag/Ag+. Moreover, the C-C coupling product acetate is generated from the same catalyst together with formate at a wide voltage range of -1.40 V to -1.65 V with the total liquid product FE from 38.8% to 85.2%. High selectivity and activity are closely related to the cathodized restructuring of Cu-MOF nanosheets. With the combination of X-ray diffraction, X-ray photoelectron spectroscopy, high resolution transmission electron microscopy and Fourier transform infrared spectroscopy, we find that Cu(ii) carboxylate nodes possibly change to CuO, Cu2O and Cu4O3, which significantly catalyze CO2 to formate and acetate with synergistic enhancement from the porphyrin-Cu(ii) complex. This intriguing phenomenon provides a new opportunity for the rational design of high-performance Cu catalysts from pre-designed MOFs.

| S-EPMC6385528 | biostudies-other

Biofunctionalized conductive polymers enable efficient CO2 electroreduction.

Project description:Selective electrocatalysts are urgently needed for carbon dioxide (CO2) reduction to replace fossil fuels with renewable fuels, thereby closing the carbon cycle. To date, noble metals have achieved the best performance in energy yield and faradaic efficiency and have recently reached impressive electrical-to-chemical power conversion efficiencies. However, the scarcity of precious metals makes the search for scalable, metal-free, CO2 reduction reaction (CO2RR) catalysts all the more important. We report an all-organic, that is, metal-free, electrocatalyst that achieves impressive performance comparable to that of best-in-class Ag electrocatalysts. We hypothesized that polydopamine-a conjugated polymer whose structure incorporates hydrogen-bonded motifs found in enzymes-could offer the combination of efficient electrical conduction, together with rendered active catalytic sites, and potentially thereby enable CO2RR. Only by developing a vapor-phase polymerization of polydopamine were we able to combine the needed excellent conductivity with thin film-based processing. We achieve catalytic performance with geometric current densities of 18 mA cm-2 at 0.21 V overpotential (-0.86 V versus normal hydrogen electrode) for the electrosynthesis of C1 species (carbon monoxide and formate) with continuous 16-hour operation at >80% faradaic efficiency. Our catalyst exhibits lower overpotentials than state-of-the-art formate-selective metal electrocatalysts (for example, 0.5 V for Ag at 18 mA cm-1). The results confirm the value of exploiting hydrogen-bonded sequences as effective catalytic centers for renewable and cost-efficient industrial CO2RR applications.

| S-EPMC5544399 | biostudies-other