Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nanoporosity of Carbon-Sulfur Nanocomposites toward the Lithium-Sulfur Battery Electrochemistry.

ABSTRACT: An ideal high-loading carbon-sulfur nanocomposite would enable high-energy-density lithium-sulfur batteries to show high electrochemical utilization, stability, and rate capability. Therefore, in this paper, we investigate the effects of the nanoporosity of various porous conductive carbon substrates (e.g., nonporous, microporous, micro/mesoporous, and macroporous carbons) on the electrochemical characteristics and cell performances of the resulting high-loading carbon-sulfur composite cathodes. The comparison analysis of this work demonstrates the importance of having high microporosity in the sulfur cathode substrate. The high-loading microporous carbon-sulfur cathode attains a high sulfur loading of 4 mg cm^-2 and sulfur content of 80 wt% at a low electrolyte-to-sulfur ratio of 10 µL mg^-1. The lithium-sulfur cell with the microporous carbon-sulfur cathode demonstrates excellent electrochemical performances, attaining a high discharge capacity approaching 1100 mA∙h g^-1, a high-capacity retention of 75% after 100 cycles, and superior high-rate capability of C/20-C/3 with excellent reversibility.

SUBMITTER: Yu CH

PROVIDER: S-EPMC8228317 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High sulfur-containing carbon polysulfide polymer as a novel cathode material for lithium-sulfur battery.

Project description:The lithium-sulfur battery, which offers a high energy density and is environmental friendly, is a promising next generation of rechargeable energy storage system. However, despite these attractive attributes, the commercialization of lithium-sulfur battery is primarily hindered by the parasitic reactions between the Li metal anode and dissolved polysulfide species from the cathode during the cycling process. Herein, we synthesize the sulfur-rich carbon polysulfide polymer and demonstrate that it is a promising cathode material for high performance lithium-sulfur battery. The electrochemical studies reveal that the carbon polysulfide polymer exhibits superb reversibility and cycle stability. This is due to that the well-designed structure of the carbon polysulfide polymer has several advantages, especially, the strong chemical interaction between sulfur and the carbon framework (C-S bonds) inhibits the shuttle effect and the ? electrons of the carbon polysulfide compound enhance the transfer of electrons and Li+. Furthermore, as-prepared carbon polysulfide polymer-graphene hybrid cathode achieves outstanding cycle stability and relatively high capacity. This work highlights the potential promise of the carbon polysulfide polymer as the cathode material for high performance lithium-sulfur battery.

| S-EPMC5595856 | biostudies-other

Waste Windshield-Derived Silicon/Carbon Nanocomposites as High-Performance Lithium-Ion Battery Anodes.

Project description:Silicon has emerged as the most promising high-capacity material for lithium-ion batteries. Waste glass can be a potential low cost and environmentally benign silica resource enabling production of nanosized silicon at the industry level. Windshields are generally made of laminated glass comprising two separate glass bonded together with a layer of polyvinyl butyral sandwiched between them. Herein, silicon/carbon nanocomposites are fabricated from windshields for the first time via magnesiothermic reduction and facile carbonization process using both waste glass and polyvinyl butyral as silica and carbon sources, respectively. High purity reduced silicon has unique 3-dimensional nanostructure with large surface area. Furthermore, the incorporation of carbon in silicon enable to retain the composite anodes highly conductive and mechanically robust, thus providing enhanced cycle stability.

| S-EPMC5772056 | biostudies-literature

Solar-Driven Rechargeable Lithium-Sulfur Battery.

Project description:Solar cells and rechargeable batteries are two key technologies for energy conversion and storage in modern society. Here, an integrated solar-driven rechargeable lithium-sulfur battery system using a joint carbon electrode in one structure unit is proposed. Specifically, three perovskite solar cells are assembled serially in a single substrate to photocharge a high energy lithium-sulfur (Li-S) battery, accompanied by direct conversion of the solar energy to chemical energy. In the subsequent discharge process, the chemical energy stored in the Li-S battery is further converted to electrical energy. Therefore, the newly designed battery is capable of achieving solar-to-chemical energy conversion under solar-driven conditions, and subsequently delivering electrical energy from the stored chemical energy. With an optimized structure design, a high overall energy conversion efficiency of 5.14% is realized for the integrated battery. Moreover, owing to the self-adjusting photocharge advantage, the battery system can retain high specific capacity up to 762.4 mAh g-1 under a high photocharge rate within 30 min, showing an effective photocharging feature.

| S-EPMC6685504 | biostudies-literature

TiO<sub>2</sub>/Porous Carbon Composite-Decorated Separators for Lithium/Sulfur Battery.

Project description:The practical application of lithium/sulfur (Li/S) batteries is hindered by the migration of soluble polysulfides (Li2Sn, 4???n???8) from cathode to anode, leading to poor electrochemical stability of the cell. To address this issue, in the present study, a TiO2/porous carbon (TiO2/PC) composite-coated Celgard 2400 separator was successfully fabricated and used as a polysulfide barrier for the Li/S battery. In TiO2/PC, the highly conductive PC with three-dimensional ordered porous structure physically constrains polysulfides and at the same time serves as an additional upper current collector. On the other hand, the TiO2 on the surface of PC chemically adsorbed polysulfides during the charge/discharge process. Due to the physical and chemical adsorption properties of TiO2/PC composite coating layer, an initial discharge capacity of 926 mAh g-1 at 0.1 C and a low fading rate (75% retention after 150?cycles) were achieved. Moreover, in the rate capability test, the discharge capacity for the TiO2/PC-modified Li/S battery was recovered to 728 mAh g-1 at 0.1 C after high-rate cycling and remained ~?88% of the initial reversible capacity.

| S-EPMC6538749 | biostudies-literature

Aspergillus flavus Conidia-derived Carbon/Sulfur Composite as a Cathode Material for High Performance Lithium-Sulfur Battery.

Project description:A novel approach was developed to prepare porous carbon materials with an extremely high surface area of 2459.6?m(2)g(-1) by using Aspergillus flavus conidia as precursors. The porous carbon serves as a superior cathode material to anchor sulfur due to its uniform and tortuous morphology, enabling high capacity and good cycle lifetime in lithium sulfur-batteries. Under a current rate of 0.2?C, the carbon-sulfur composites with 56.7?wt% sulfur loading deliver an initial capacity of 1625?mAh g(-1), which is almost equal to the theoretical capacity of sulfur. The good performance may be ascribed to excellent electronic networks constructed by the high-surface-area carbon species. Moreover, the semi-closed architecture of derived carbons can effectively retard the polysulfides dissolution during charge/discharge, resulting in a capacity of 940?mAh g(-1) after 120 charge/discharge cycles.

| S-EPMC4702123 | biostudies-literature

Co3O4-NP embedded mesoporous carbon rod with enhanced electrocatalytic conversion in lithium-sulfur battery.

Project description:Lithium-sulfur battery has been considered to be one of the promising alternatives to the traditional lithium-ion battery due to its high theoretical energy density and saving-cost. However, the sluggish reaction during the decomposition of lithium sulfide results in a low specific capacity and poor cycling stability. Herein Co3O4 nano-particle embedded mesoporous carbon rod (Co3O4@MCR) was prepared through a template method to accommodate sulfur as cathode of lithium-sulfur battery. The resultant composite was characterized by Raman spectra, XRD, TEM, SEM, etc. The electrochemical investigation demonstrated that Co3O4@MCR composite exhibits enhanced electrocatalytic performance in lithium-sulfur battery, which was confirmed by cyclic voltammograms, galvanostatic charge-discharge testing, and study of sulfide oxidation using linear sweep voltammetry. With the current density of 0.2?A/g, the specific discharge capacity can be achieved up to more than 1000 mAh/g after 100 cycles. The enhanced electrocatalytic conversion from Co3O4@MCR leads to a low over-potential, fast lithium-ion kinetics and sulfide oxidation reaction.

| S-EPMC6208390 | biostudies-literature

Synthesis and characterization of electrospun molybdenum dioxide-carbon nanofibers as sulfur matrix additives for rechargeable lithium-sulfur battery applications.

Project description:One-dimensional molybdenum dioxide-carbon nanofibers (MoO2-CNFs) were prepared using an electrospinning technique followed by calcination, using sol-gel precursors and polyacrylonitrile (PAN) as a processing aid. The resulting samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, Brunauer-Emmet-Teller (BET) surface area measurements, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). MoO2-CNFs with an average diameter of 425-575 nm obtained after heat treatment were used as a matrix to prepare sulfur/MoO2-CNF cathodes for lithium-sulfur (Li-S) batteries. The polysulfide adsorption and electrochemical performance tests demonstrated that MoO2-CNFs did not only act as polysulfide reservoirs to alleviate the shuttle effect, but also improve the electrochemical reaction kinetics during the charge-discharge processes. The effect of MoO2-CNF heat treatment on the cycle performance of sulfur/MoO2-CNFs electrodes was examined, and the data showed that MoO2-CNFs calcined at 850 °C delivered optimal performance with an initial capacity of 1095 mAh g-1 and 860 mAh g-1 after 50 cycles. The results demonstrated that sulfur/MoO2-CNF composites display a remarkably high lithium-ion diffusion coefficient, low interfacial resistance and much better electrochemical performance than pristine sulfur cathodes.

| S-EPMC5789398 | biostudies-literature

Lamellar Polypyrene Based on Attapulgite-Sulfur Composite for Lithium-Sulfur Battery.

Project description:We report on the preparation and characterization of a novel lamellar polypyrrole using an attapulgite-sulfur composite as a hard template. Pretreated attapulgite was utilized as the carrier of elemental sulfur and the attapulgite-sulfur-polypyrrole (AT @400 °C-S-PPy) composite with 50 wt.% sulfur was obtained. The structure and morphology of the composite were characterized with infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). An AT @400 °C-S-PPy composite was further utilized as the cathode material for lithium-sulfur batteries. The first discharge specific capacity of this kind of battery reached 1175 mAh/g at a 0.1 C current rate and remained at 518 mAh/g after 100 cycles with capacity retention close to 44%. In the rate test, compared with the polypyrrole-sulfur (PPy-S) cathode material, the AT @400 °C-S-PPy cathode material showed lower capacity at a high current density, but it showed higher capacity when the current came back to a low current density, which was attributed to the "recycling" of pores and channels of attapulgite. Therefore, the lamellar composite with special pore structure has great value in improving the performance of lithium-sulfur batteries.

| S-EPMC8306344 | biostudies-literature

Leaf-Like Graphene-Oxide-Wrapped Sulfur for High-Performance Lithium-Sulfur Battery.

Project description:Carbon/sulfur composites are attracting extensive attention because of their improved performances for Li-S batteries. However, the achievements are generally based on the low S-content in the composites and the low S-loading on the electrode. Herein, a leaf-like graphene oxide (GO), which includes an inherent carbon nanotube midrib in the GO plane, is synthesized for preparing GO/S composites. Owing to the inherent high conductivity of carbon nanotube midribs and the abundant surface groups of GO for S-immobilization, the composite with an S-content of 60 wt% exhibits ultralong cycling stability over 1000 times with a low capacity decay of 0.033% per cycle and a high rate up to 4C. When the S-content is increased to 75 wt%, the composite still shows a perfect cycling performance over 1000 cycles. Even with the high S-loading of 2.7 mg cm-2 on the electrode and the high S-content of 85 wt%, it still shows a promising cycling performance over 600 cycles.

| S-EPMC5115426 | biostudies-literature

Fluorine-Modulated MXene-Derived Catalysts for Multiphase Sulfur Conversion in Lithium-Sulfur Battery.

Project description:Fluorine owing to its inherently high electronegativity exhibits charge delocalization and ion dissociation capabilities; as a result, there has been an influx of research studies focused on the utilization of fluorides to optimize solid electrolyte interfaces and provide dynamic protection of electrodes to regulate the reaction and function performance of batteries. Nonetheless, the shuttle effect and the sluggish redox reaction kinetics emphasize the potential bottlenecks of lithium-sulfur batteries. Whether fluorine modulation regulate the reaction process of Li-S chemistry? Here, the TiOF/Ti3C2 MXene nanoribbons with a tailored F distribution were constructed via an NH4F fluorinated method. Relying on in situ characterizations and electrochemical analysis, the F activates the catalysis function of Ti metal atoms in the consecutive redox reaction. The positive charge of Ti metal sites is increased due to the formation of O-Ti-F bonds based on the Lewis acid-base mechanism, which contributes to the adsorption of polysulfides, provides more nucleation sites and promotes the cleavage of S-S bonds. This facilitates the deposition of Li2S at lower overpotentials. Additionally, fluorine has the capacity to capture electrons originating from Li2S dissolution due to charge compensation mechanisms. The fluorine modulation strategy holds the promise of guiding the construction of fluorine-based catalysts and facilitating the seamless integration of multiple consecutive heterogeneous catalytic processes.

| S-EPMC11319705 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data