Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Lamellar Polypyrene Based on Attapulgite-Sulfur Composite for Lithium-Sulfur Battery.

ABSTRACT: We report on the preparation and characterization of a novel lamellar polypyrrole using an attapulgite-sulfur composite as a hard template. Pretreated attapulgite was utilized as the carrier of elemental sulfur and the attapulgite-sulfur-polypyrrole (AT @400 °C-S-PPy) composite with 50 wt.% sulfur was obtained. The structure and morphology of the composite were characterized with infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). An AT @400 °C-S-PPy composite was further utilized as the cathode material for lithium-sulfur batteries. The first discharge specific capacity of this kind of battery reached 1175 mAh/g at a 0.1 C current rate and remained at 518 mAh/g after 100 cycles with capacity retention close to 44%. In the rate test, compared with the polypyrrole-sulfur (PPy-S) cathode material, the AT @400 °C-S-PPy cathode material showed lower capacity at a high current density, but it showed higher capacity when the current came back to a low current density, which was attributed to the "recycling" of pores and channels of attapulgite. Therefore, the lamellar composite with special pore structure has great value in improving the performance of lithium-sulfur batteries.

SUBMITTER: Wang J

PROVIDER: S-EPMC8306344 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Construction of Polypyrrole-Coated CoSe2 Composite Material for Lithium-Sulfur Battery

Project description:Lithium-sulfur batteries with high theoretical energy density and cheap cost can meet people’s need for efficient energy storage, and have become a focus of the research on lithium-ion batteries. However, owing to their poor conductivity and “shuttle effect”, lithium-sulfur batteries are difficult to commercialize. In order to solve this problem, herein a polyhedral hollow structure of cobalt selenide (CoSe2) was synthesized by a simple one-step carbonization and selenization method using metal-organic bone MOFs (ZIF-67) as template and precursor. CoSe2 is coated with conductive polymer polypyrrole (PPy) to settle the matter of poor electroconductibility of the composite and limit the outflow of polysulfide compounds. The prepared CoSe2@PPy-S composite cathode shows reversible capacities of 341 mAh g−1 at 3 C, and good cycle stability with a small capacity attenuation rate of 0.072% per cycle. The structure of CoSe2 can have certain adsorption and conversion effects on polysulfide compounds, increase the conductivity after coating PPy, and further enhance the electrochemical property of lithium-sulfur cathode material.

| S-EPMC10005037 | biostudies-literature

Sustainable Sulfur-rich Copolymer/Graphene Composite as Lithium-Sulfur Battery Cathode with Excellent Electrochemical Performance.

Project description:A sulfur-rich copolymer, poly(S-r-C-a) has been synthesized via a sustainable route, showing the utility of two major industrial wastes- elemental sulfur (petroleum waste) and cardanol (agro waste), to explore its potential as cathode material for Li-S batteries. The sulfur-rich copolymer exhibited a reduction in the active material dissolution into the electrolyte and a low self-discharge rate behavior during the rest time compared to an elemental sulfur cathode, indicating the chemical confinement of sulfur units. The presence of organosulfur moieties in copolymer suppress the irreversible deposition of end-discharge products on electrode surfaces and thus improve the electrochemical performances of Li-S batteries. This sulfur copolymer offered a reversible capacity of 892 mA h g(-1) at 2nd cycle and maintained the capacity of 528 mA h g(-1) after 50 cycles at 200 mA g(-1). Reduced graphene oxide (rGO) prepared via a sustainable route was used as a conductive filler to extract the better electrochemical performances from this sulfur copolymer. Such sustainable origin batteries prepared via economically viable showed an improved specific capacity of ~975 mA h g(-1) after 100 cycles at 200 mA g(-1) current rate with capacity fading of 0.15% per cycle and maintained a stable performance over 500 cycles at 2000 mA g(-1).

| S-EPMC4848474 | biostudies-literature

TiO<sub>2</sub>/Porous Carbon Composite-Decorated Separators for Lithium/Sulfur Battery.

Project description:The practical application of lithium/sulfur (Li/S) batteries is hindered by the migration of soluble polysulfides (Li2Sn, 4???n???8) from cathode to anode, leading to poor electrochemical stability of the cell. To address this issue, in the present study, a TiO2/porous carbon (TiO2/PC) composite-coated Celgard 2400 separator was successfully fabricated and used as a polysulfide barrier for the Li/S battery. In TiO2/PC, the highly conductive PC with three-dimensional ordered porous structure physically constrains polysulfides and at the same time serves as an additional upper current collector. On the other hand, the TiO2 on the surface of PC chemically adsorbed polysulfides during the charge/discharge process. Due to the physical and chemical adsorption properties of TiO2/PC composite coating layer, an initial discharge capacity of 926 mAh g-1 at 0.1 C and a low fading rate (75% retention after 150?cycles) were achieved. Moreover, in the rate capability test, the discharge capacity for the TiO2/PC-modified Li/S battery was recovered to 728 mAh g-1 at 0.1 C after high-rate cycling and remained ~?88% of the initial reversible capacity.

| S-EPMC6538749 | biostudies-literature

Aspergillus flavus Conidia-derived Carbon/Sulfur Composite as a Cathode Material for High Performance Lithium-Sulfur Battery.

Project description:A novel approach was developed to prepare porous carbon materials with an extremely high surface area of 2459.6?m(2)g(-1) by using Aspergillus flavus conidia as precursors. The porous carbon serves as a superior cathode material to anchor sulfur due to its uniform and tortuous morphology, enabling high capacity and good cycle lifetime in lithium sulfur-batteries. Under a current rate of 0.2?C, the carbon-sulfur composites with 56.7?wt% sulfur loading deliver an initial capacity of 1625?mAh g(-1), which is almost equal to the theoretical capacity of sulfur. The good performance may be ascribed to excellent electronic networks constructed by the high-surface-area carbon species. Moreover, the semi-closed architecture of derived carbons can effectively retard the polysulfides dissolution during charge/discharge, resulting in a capacity of 940?mAh g(-1) after 120 charge/discharge cycles.

| S-EPMC4702123 | biostudies-literature

A Lamellar Yolk-Shell Lithium-Sulfur Battery Cathode Displaying Ultralong Cycling Life, High Rate Performance, and Temperature Tolerance.

Project description:The shuttling behavior and slow conversion kinetics of the intermediate lithium polysulfides are the severe obstacles for the application of lithium-sulfur (Li-S) batteries over a wide temperature range. Here, an engineered lamellar yolk-shell structure of In2 O3 @void@carbon for the Li-S battery cathode is developed for the first time to construct a powerful barrier that effectively inhibits the shuttling of polysulfides. On the basis of the unique nanochannel-containing morphology, the continuous kinetic transformation of sulfur and polysulfides is confined in a stable framework, which is demonstrated by using X-ray nanotomography. The constructed Li-S battery exhibits a high cycling capability over 1000 cycles at 1.0 C with a capacity decay rate as low as 0.038% per cycle, good rate performance, and temperature tolerance at -10, 25, and 50 °C. A nondestructive in situ monitoring method of the interfacial reaction resistance in different cycling stages is proposed, which provides a new analysis perspective for the development of emerging electrochemical energy-storage systems.

| S-EPMC8787391 | biostudies-literature

Solar-Driven Rechargeable Lithium-Sulfur Battery.

Project description:Solar cells and rechargeable batteries are two key technologies for energy conversion and storage in modern society. Here, an integrated solar-driven rechargeable lithium-sulfur battery system using a joint carbon electrode in one structure unit is proposed. Specifically, three perovskite solar cells are assembled serially in a single substrate to photocharge a high energy lithium-sulfur (Li-S) battery, accompanied by direct conversion of the solar energy to chemical energy. In the subsequent discharge process, the chemical energy stored in the Li-S battery is further converted to electrical energy. Therefore, the newly designed battery is capable of achieving solar-to-chemical energy conversion under solar-driven conditions, and subsequently delivering electrical energy from the stored chemical energy. With an optimized structure design, a high overall energy conversion efficiency of 5.14% is realized for the integrated battery. Moreover, owing to the self-adjusting photocharge advantage, the battery system can retain high specific capacity up to 762.4 mAh g-1 under a high photocharge rate within 30 min, showing an effective photocharging feature.

| S-EPMC6685504 | biostudies-literature

Multi-Dimensional Composite Frame as Bifunctional Catalytic Medium for Ultra-Fast Charging Lithium-Sulfur Battery.

Project description:The shuttle effect of soluble lithium polysulfides (LiPSs) between electrodes and slow reaction kinetics lead to extreme inefficiency and poor high current cycling stability, which limits the commercial application of Li-S batteries. Herein, the multi-dimensional composite frame has been proposed as the modified separator (MCCoS/PP) of Li-S battery, which is composed of CoS2 nanoparticles on alkali-treated MXene nanosheets and carbon nanotubes. Both experiments and theoretical calculations show that bifunctional catalytic activity can be achieved on the MCCoS/PP separator. It can not only promote the liquid-solid conversion in the reduction process, but also accelerate the decomposition of insoluble Li2S in the oxidation process. In addition, LiPSs shuttle effect has been inhibited without a decrease in lithium-ion transference numbers. Simultaneously, the MCCoS/PP separator with good LiPSs adsorption capability arouses redistribution and fixing of active substances, which is also beneficial to the rate performance and cycling stability. The Li-S batteries with the MCCoS/PP separator have a specific capacity of 368.6 mAh g-1 at 20C, and the capacity decay per cycle is only 0.033% in 1000 cycles at 7C. Also, high area capacity (6.34 mAh cm-2) with a high sulfur loading (7.7 mg cm-2) and a low electrolyte/sulfur ratio (7.5 μL mg-1) is achieved.

| S-EPMC9537413 | biostudies-literature

Nanoporosity of Carbon-Sulfur Nanocomposites toward the Lithium-Sulfur Battery Electrochemistry.

Project description:An ideal high-loading carbon-sulfur nanocomposite would enable high-energy-density lithium-sulfur batteries to show high electrochemical utilization, stability, and rate capability. Therefore, in this paper, we investigate the effects of the nanoporosity of various porous conductive carbon substrates (e.g., nonporous, microporous, micro/mesoporous, and macroporous carbons) on the electrochemical characteristics and cell performances of the resulting high-loading carbon-sulfur composite cathodes. The comparison analysis of this work demonstrates the importance of having high microporosity in the sulfur cathode substrate. The high-loading microporous carbon-sulfur cathode attains a high sulfur loading of 4 mg cm-2 and sulfur content of 80 wt% at a low electrolyte-to-sulfur ratio of 10 µL mg-1. The lithium-sulfur cell with the microporous carbon-sulfur cathode demonstrates excellent electrochemical performances, attaining a high discharge capacity approaching 1100 mA∙h g-1, a high-capacity retention of 75% after 100 cycles, and superior high-rate capability of C/20-C/3 with excellent reversibility.

| S-EPMC8228317 | biostudies-literature

Leaf-Like Graphene-Oxide-Wrapped Sulfur for High-Performance Lithium-Sulfur Battery.

Project description:Carbon/sulfur composites are attracting extensive attention because of their improved performances for Li-S batteries. However, the achievements are generally based on the low S-content in the composites and the low S-loading on the electrode. Herein, a leaf-like graphene oxide (GO), which includes an inherent carbon nanotube midrib in the GO plane, is synthesized for preparing GO/S composites. Owing to the inherent high conductivity of carbon nanotube midribs and the abundant surface groups of GO for S-immobilization, the composite with an S-content of 60 wt% exhibits ultralong cycling stability over 1000 times with a low capacity decay of 0.033% per cycle and a high rate up to 4C. When the S-content is increased to 75 wt%, the composite still shows a perfect cycling performance over 1000 cycles. Even with the high S-loading of 2.7 mg cm-2 on the electrode and the high S-content of 85 wt%, it still shows a promising cycling performance over 600 cycles.

| S-EPMC5115426 | biostudies-literature

Fluorine-Modulated MXene-Derived Catalysts for Multiphase Sulfur Conversion in Lithium-Sulfur Battery.

Project description:Fluorine owing to its inherently high electronegativity exhibits charge delocalization and ion dissociation capabilities; as a result, there has been an influx of research studies focused on the utilization of fluorides to optimize solid electrolyte interfaces and provide dynamic protection of electrodes to regulate the reaction and function performance of batteries. Nonetheless, the shuttle effect and the sluggish redox reaction kinetics emphasize the potential bottlenecks of lithium-sulfur batteries. Whether fluorine modulation regulate the reaction process of Li-S chemistry? Here, the TiOF/Ti3C2 MXene nanoribbons with a tailored F distribution were constructed via an NH4F fluorinated method. Relying on in situ characterizations and electrochemical analysis, the F activates the catalysis function of Ti metal atoms in the consecutive redox reaction. The positive charge of Ti metal sites is increased due to the formation of O-Ti-F bonds based on the Lewis acid-base mechanism, which contributes to the adsorption of polysulfides, provides more nucleation sites and promotes the cleavage of S-S bonds. This facilitates the deposition of Li2S at lower overpotentials. Additionally, fluorine has the capacity to capture electrons originating from Li2S dissolution due to charge compensation mechanisms. The fluorine modulation strategy holds the promise of guiding the construction of fluorine-based catalysts and facilitating the seamless integration of multiple consecutive heterogeneous catalytic processes.

| S-EPMC11319705 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data