Monitoring Symptoms of Infectious Diseases: Perspectives for Printed Wearable Sensors.
Ontology highlight
ABSTRACT:
SUBMITTER: Al-Halhouli A
PROVIDER: S-EPMC8229808 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Wearable sensor device technologies, which enable continuous monitoring of biological information from the human body, are promising in the fields of sports, healthcare, and medical applications. Further thinness, light weight, flexibility and low-cost are significant requirements for making the devices attachable onto human tissues or clothes like a patch. Here we demonstrate a flexible and printed circuit system consisting of an enzyme-based amperometric sensor, feedback control and amplification circuits based on organic thin-film transistors. The feedback control and amplification circuits based on pseudo-CMOS inverters were successfuly integrated by printing methods on a plastic film. This simple system worked very well like a potentiostat for electrochemical measurements, and enabled the quantitative and real-time measurement of lactate concentration with high sensitivity of 1?V/mM and a short response time of a hundred seconds.
| S-EPMC5913266 | biostudies-literature
Project description:Electrochemical sensor systems with integrated amplifier circuits play an important role in measuring physiological signals via in situ human perspiration analysis. Signal processing circuitry based on organic thin-film transistors (OTFTs) have significant potential in realizing wearable sensor devices due to their superior mechanical flexibility and biocompatibility. Here, we demonstrate a novel potentiometric electrochemical sensing system comprised of a potassium ion (K+) sensor and amplifier circuits employing OTFT-based pseudo-CMOS inverters, which have a highly controllable switching voltage and closed-loop gain. The ion concentration sensitivity of the fabricated K+ sensor was 34?mV/dec, which was amplified to 160?mV/dec (by a factor of 4.6) with high linearity. The developed system is expected to help further the realization of ultra-thin and flexible wearable sensor devices for healthcare applications.
| S-EPMC5834464 | biostudies-literature
Project description:We propose watch-type sweat rate sensors capable of automatic natural ventilation by integrating miniaturized thermo-pneumatic actuators, and experimentally verify their performances and applicability. Previous sensors using natural ventilation require manual ventilation process or high-power bulky thermo-pneumatic actuators to lift sweat rate detection chambers above skin for continuous measurement. The proposed watch-type sweat rate sensors reduce operation power by minimizing expansion fluid volume to 0.4?ml through heat circuit modeling. The proposed sensors reduce operation power to 12.8% and weight to 47.6% compared to previous portable sensors, operating for 4?hours at 6?V batteries. Human experiment for thermal comfort monitoring is performed by using the proposed sensors having sensitivity of 0.039 (pF/s)/(g/m2h) and linearity of 97.9% in human sweat rate range. Average sweat rate difference for each thermal status measured in three subjects shows (32.06?±?27.19) g/m2h in thermal statuses including 'comfortable', 'slightly warm', 'warm', and 'hot'. The proposed sensors thereby can discriminate and compare four stages of thermal status. Sweat rate measurement error of the proposed sensors is less than 10% under air velocity of 1.5?m/s corresponding to human walking speed. The proposed sensors are applicable for wearable and portable use, having potentials for daily thermal comfort monitoring applications.
| S-EPMC5775419 | biostudies-other
Project description:BackgroundMobility impairment is common in people with multiple sclerosis (PwMS) and there is a need to assess mobility in remote settings. Here, we apply a novel wireless, skin-mounted, and conformal inertial sensor (BioStampRC, MC10 Inc.) to examine gait characteristics of PwMS under controlled conditions. We determine the accuracy and precision of BioStampRC in measuring gait kinematics by comparing to contemporary research-grade measurement devices.MethodsA total of 45 PwMS, who presented with diverse walking impairment (Mild MS = 15, Moderate MS = 15, Severe MS = 15), and 15 healthy control subjects participated in the study. Participants completed a series of clinical walking tests. During the tests participants were instrumented with BioStampRC and MTx (Xsens, Inc.) sensors on their shanks, as well as an activity monitor GT3X (Actigraph, Inc.) on their non-dominant hip. Shank angular velocity was simultaneously measured with the inertial sensors. Step number and temporal gait parameters were calculated from the data recorded by each sensor. Visual inspection and the MTx served as the reference standards for computing the step number and temporal parameters, respectively. Accuracy (error) and precision (variance of error) was assessed based on absolute and relative metrics. Temporal parameters were compared across groups using ANOVA.ResultsMean accuracy±precision for the BioStampRC was 2±2 steps error for step number, 6±9ms error for stride time and 6±7ms error for step time (0.6-2.6% relative error). Swing time had the least accuracy±precision (25±19ms error, 5±4% relative error) among the parameters. GT3X had the least accuracy±precision (8±14% relative error) in step number estimate among the devices. Both MTx and BioStampRC detected significantly distinct gait characteristics between PwMS with different disability levels (p<0.01).ConclusionBioStampRC sensors accurately and precisely measure gait parameters in PwMS across diverse walking impairment levels and detected differences in gait characteristics by disability level in PwMS. This technology has the potential to provide granular monitoring of gait both inside and outside the clinic.
| S-EPMC5298289 | biostudies-literature
Project description:Background: While preliminary evidence suggests that sensors may be employed to detect presence of low mood it is still unclear whether they can be leveraged for measuring depression symptom severity. This study evaluates the feasibility and performance of assessing depressive symptom severity by using behavioral and physiological features obtained from wristband and smartphone sensors. Method: Participants were thirty-one individuals with Major Depressive Disorder (MDD). The protocol included 8 weeks of behavioral and physiological monitoring through smartphone and wristband sensors and six in-person clinical interviews during which depression was assessed with the 17-item Hamilton Depression Rating Scale (HDRS-17). Results: Participants wore the right and left wrist sensors 92 and 94% of the time respectively. Three machine-learning models estimating depressive symptom severity were developed-one combining features from smartphone and wearable sensors, one including only features from the smartphones, and one including features from wrist sensors-and evaluated in two different scenarios. Correlations between the models' estimate of HDRS scores and clinician-rated HDRS ranged from moderate to high (0.46 [CI: 0.42, 0.74] to 0.7 [CI: 0.66, 0.74]) and had moderate accuracy with Mean Absolute Error ranging between 3.88 ± 0.18 and 4.74 ± 1.24. The time-split scenario of the model including only features from the smartphones performed the best. The ten most predictive features in the model combining physiological and mobile features were related to mobile phone engagement, activity level, skin conductance, and heart rate variability. Conclusion: Monitoring of MDD patients through smartphones and wrist sensors following a clinician-rated HDRS assessment is feasible and may provide an estimate of changes in depressive symptom severity. Future studies should further examine the best features to estimate depressive symptoms and strategies to further enhance accuracy.
| S-EPMC7775362 | biostudies-literature
Project description:Civil infrastructure is expanding around the world. The ever-growing trend toward urbanization drives the demand for new investments. However, the new constructions and gradual deterioration of those already existing, especially bridges, give rise to concerns about their proper maintenance. To improve safety and drive down maintenance costs of civil structures, there is a need for inexpensive sensing systems capable of reliable and automated monitoring. In this study, we present a new concept of thin-film strain sensors arranged in an array with a concentric layout that is incorporated into a flexible substrate sheet. The designed sensor array is intended to analyze strains in the proximity of round holes made at the crack tips, found in the investigated construction elements of civil structures. In this study, the performance of the sensor array was demonstrated using measurements taken on a highway bridge in one of the largest cities in Japan. We show that it can measure local strain distribution and indicate a region with risk for crack formation. The demonstrated results show new area of potential applications for the printed strain sensors in monitoring civil structures.
| S-EPMC7180977 | biostudies-literature
Project description:Polymeric sensors on fabrics have vast potential toward the development of versatile applications, particularly when the ready-made wearable or fabric can be directly coated. However, traditional coating approaches, such as solution-based methods, have limitations in achieving uniform and thin films because of the poor surface wettability of fabrics. Herein, to realize a uniform poly(3,4-ethylenedioxythiophene) (PEDOT) layer on various everyday fabrics, we use oxidative chemical vapor deposition (oCVD). The oCVD technique is a unique method capable of forming patterned polymer films with controllable thicknesses while maintaining the inherent advantages of fabrics, such as exceptional mechanical stability and breathability. Utilizing the superior characteristics of oCVD PEDOT, we succeed in fabricating blood pressure– and respiratory rate–monitoring sensors by directly depositing and patterning PEDOT on commercially available disposable gloves and masks, respectively. Those results are expected to pave efficient and facile ways for skin-compatible and affordable sensors for personal health care monitoring.
| S-EPMC8519566 | biostudies-literature
Project description:INTRODUCTION:Falling is among the most serious clinical problems in Parkinson's disease (PD). We used body-worn sensors (falls detector worn as a necklace) to quantify the hazard ratio of falls in PD patients in real life. METHODS:We matched all 2063 elderly individuals with self-reported PD to 2063 elderly individuals without PD based on age, gender, comorbidity, and living conditions. We analyzed fall events collected at home via a wearable sensor. Fall events were collected either automatically using the wearable falls detector or were registered by a button push on the same device. We extracted fall events from a 2.5-year window, with an average follow-up of 1.1?years. All falls included were confirmed immediately by a subsequent telephone call. The outcomes evaluated were (1) incidence rate of any fall, (2) incidence rate of a new fall after enrollment (ie, hazard ratio), and (3) 1-year cumulative incidence of falling. RESULTS:The incidence rate of any fall was higher among self-reported PD patients than controls (2.1 vs. 0.7 falls/person, respectively; P?<?.0001). The incidence rate of a new fall after enrollment (ie, hazard ratio) was 1.8 times higher for self-reported PD patients than controls (95% confidence interval, 1.6-2.0). CONCLUSION:Having PD nearly doubles the incidence of falling in real life. These findings highlight PD as a prime "falling disease." The results also point to the feasibility of using body-worn sensors to monitor falls in daily life. © 2019 The Authors. Movement Disorders published by Wiley Periodicals, Inc. on behalf of International Parkinson and Movement Disorder Society.
| S-EPMC7003816 | biostudies-literature
Project description:Accurate monitoring of motion and sleep states is critical for human health assessment, especially for a healthy life, early diagnosis of diseases, and medical care. In this work, a smart wearable sensor (SWS) based on a dual-channel triboelectric nanogenerator was presented for a real-time health monitoring system. The SWS can be worn on wrists, ankles, shoes, or other parts of the body and cloth, converting mechanical triggers into electrical output. By analyzing these signals, the SWS can precisely and constantly monitor and distinguish various motion states, including stepping, walking, running, and jumping. Based on the SWS, a fall-down alarm system and a sleep quality assessment system were constructed to provide personal healthcare monitoring and alert family members or doctors via communication devices. It is important for the healthy growth of the young and special patient groups, as well as for the health monitoring and medical care of the elderly and recovered patients. This work aimed to broaden the paths for remote biological movement status analysis and provide diversified perspectives for true-time and long-term health monitoring, simultaneously.
| S-EPMC8064435 | biostudies-literature
Project description:The right to health as a fundamental human right is enshrined in the World Health Organization's charter and has been reaffirmed in international agreements spanning decades. This new journal reminds us of the essential characteristic of poverty as a violent abuse of human rights. The context of poverty - its social, political and economic dimensions - remain in the reader's mind as evidence is provided on technical solutions to managing the infectious diseases that afflict poor populations world-wide. Applying a health systems framework to a discussion on infectious diseases of poverty emerges from the papers in this journal's first edition. Many of the articles discuss treatments, indicating the importance of pharmaceuticals for neglected diseases. Delivery strategies to reach impoverished populations also figure within this first round of papers. Innovative programs that provide diagnostics and treatment for infectious diseases to hard-to-reach rural and urban communities are needed clearly needed, and some good examples are discussed here. Future editions will explore other health system components, broadening the evidence base to increase understanding of effective and sustainable interventions to reduce the burden of infectious disease among the poor. The editors are to be congratulated on the release of this inaugural issue of the journal Infectious Diseases of Poverty. We look forward to reading subsequent editions.
| S-EPMC3710094 | biostudies-literature