Dataset Information

Straw-Based Activated Carbon: Optimization of the Preparation Procedure and Performance of Volatile Organic Compounds Adsorption.

ABSTRACT: Straw is one of the largest agricultural biowastes and a potential alternative precursor of activated carbon. Activated carbon prepared from different types of straw have great differences in structure and adsorption performance. In order to explore the performance of different straw-based activated carbon in volatile organic compounds adsorption, five common straws were selected as potential source materials for the preparation of SAC. The straw-based activated carbons were prepared and characterized via a thermo-gravimetric analysis, scanning electron microscope and the Brunauer-Emmett-Teller method. Among the five straw-based activated carbons, millet straw-derived activated carbon exhibited superior properties in S_BET, S_mic and adsorption capacities of both toluene and ethyl acetate. Furthermore, the preparation process of millet straw activated carbon was optimized via response surface methodology, using carbonization temperature, carbonization time and impregnation ratio as variables and toluene adsorption capacity, ethyl acetate adsorption capacity and activated carbon yield as responses. The optimal preparation conditions include a carbonization temperature of 572 °C, carbonization time of 1.56 h and impregnation ratio (ZnCl₂/PM, w/w) of 1.60, which was verified experimentally, resulting in millet straw activated carbon with a toluene adsorption capacity of 321.9 mg/g and ethyl acetate adsorption capacity of 240.4 mg/g. Meanwhile, the adsorption isothermals and regeneration performance of millet straw activated carbon prepared under the optimized conditions were evaluated. The descriptive ability of the isothermals via the Redlich-Peterson equation suggests a heterogeneous surface on millet straw activated carbon. Recyclability testing has shown that millet straw activated carbon maintained a stable adsorption capacity throughout the second to fifth cycles. The results of this work indicate that millet straw activated carbon may be a potential volatile organic compound adsorbent for industrial application.

SUBMITTER: Li Z

PROVIDER: S-EPMC8232107 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Knowledge of organic compounds adsorption by adsorbents is essential for evaluating the environmental fates of organic compounds and removing them from the environment. Linear adsorption, as a supplement to the traditionally nonlinear adsorption, was previously proposed for the linear sorption of organic compounds on the mesoporous surface of carbon nanotubes (CNTs) in multi-solute system. However, CNTs are not the ideal adsorbent to verify the linear adsorption mechanism, because of their partition-like phase components such as mobile graphene layers that could be responsible for the linear sorption through linear partition mechanism instead, and thus the linear adsorption theory was argued. In this study, therefore, mesoporous activated carbon (MAC), widely accepted as the model free of partition phase components, was selected as an adsorbent to investigate the adsorption of typical organic compounds in the bi-solute system for verifying whether the linear adsorption phenomenon existed or not. The isotherm of nitrobenzene on MAC was changed from nonlinear to linear with 4-nitrophenol up to 1400 mg/L, and the linear isotherm slope decreased more as 4-nitrophenol concentration increased until 4000 mg/L. It agreed with the characteristics of adsorption (i.e., competition) but not partition (i.e., noncompetition), confirming the existence of linear adsorption. The isotherm linearity was attributed to the reduction of adsorption interactions by displacement and multilayer adsorption. Moreover, linear adsorption of apolar compounds on MAC could occur with apolar or polar competitors, while for polar compounds, linear adsorption could occur with only polar competitors. The observed linear sorption and the competition of organic compounds in the bi-solute system on MAC free of partition phase components verified that the linear adsorption existed, which gives a new insight into the adsorption theory for organic compounds. The results could provide better fundamental theory of adsorption for improving the accuracy of environmental risk assessment of organic pollution and enhancing the efficiency of organic pollution control in the environment.

Project description:This study investigated the removal of Total Organic Carbon (TOC) from produced water by batch adsorption process using adsorbents developed from Multi-Walled Carbon Nanotubes (MWCNTs). The MWCNTs, synthesized by catalytic chemical vapour deposition method using kaolin-supported tri-metallic (iron-cobalt-nickel) catalyst were purified by H2SO4/HNO3 and then functionalized with 1-pyrenebutanoic acid N-hydroxyl succinimidyl ester (PSE). The raw, purified and functionalized MWCNTs were characterized by High Resolution Scanning Electron Microscopy (HRSEM), High Resolution Transmission Electron Microscopy (HRTEM), Brunauer-Emmett-Teller (BET) and Fourier Transform Infrared Spectroscopy (FTIR). In the results, HRSEM/HRTEM revealed the structure, purity and also confirmed the attachment of the PSE molecule onto the nano-adsorbent(s). The BET surface areas of MWCNTs, PMWCNTs and FMWCNTs were 970.17, 869.25 and 831.80 m2/g, respectively while the FTIR established the existence of surface functional groups. The functionalized MWCNTs (FMWCNTs) nano-adsorbent showed superior performance efficiency (93.6%) than the purified MWCNTs (PMWCNTs) (79.2%) as examined under the same batch adsorption condition: 0.02 g adsorbent dosage, 10-90 min contact time and 30 °C solution temperature probably, due the improved wettability resulted from incorporation of PSE. Subsequently, Central Composite Design (CCD) was applied to optimize the process parameters for the sorption of TOC onto FMWCNTs. The CCD in the response surface methodology predicted 260 mg/g adsorption capacity of FMWCNTs in the removal of TOC at the optimum condition of 49.70 min contact time, 34.81 °C solution temperature, and 0.02 g adsorbent dosage. The kinetics data were best described by pseudo-second-order model and thermodynamic parameters suggested that the process was feasible, spontaneous and exothermic. It can be inferred from the various analysis conducted that the developed FMWCNTs nano-adsorbent is effective for removal of TOC from oil-produced water and may be explored for removal of organic contaminants from other industrial wastewater.

Dataset Information

Straw-Based Activated Carbon: Optimization of the Preparation Procedure and Performance of Volatile Organic Compounds Adsorption.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets