Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Resolving the Geometry/Charge Puzzle of the c(2 × 2)-Cl Cu(100) Electrode.

ABSTRACT: Potential-induced changes in charge and surface structure are significant drivers of the reactivity of electrochemical interfaces but are frequently difficult to decouple from the effects of surface solvation. Here, we consider the Cu(100) surface with a c(2 × 2)-Cl adlayer, a model surface with multiple geometry measurements under both ultrahigh vacuum and electrochemical conditions. Under aqueous electrochemical conditions, the measured Cu-Cl interplanar separation (d_Cu-Cl) increases by at least 0.3 Å relative to that under ultrahigh vacuum conditions. This large geometry change is unexpected for a hydrophobic surface, and it requires invoking a negative charge on the Cl-covered surface which is much greater than expected from the work function and our capacitance measurements. To resolve this inconsistency we employ ab initio calculations and find that the Cu-Cl separation increases with charging at a rate of 0.7 Å/e^- per Cl atom. The larger Cu-Cl bond distance increases the surface dipole and, therefore, the work function of the interface, contributing to the negative charge under fixed potential electrochemical conditions. Interactions with water are not needed to explain either the large charge or large Cu-Cl interplanar spacing of this surface under electrochemical conditions.

SUBMITTER: Schwarz K

PROVIDER: S-EPMC8237333 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Plasma-assisted oxidation of Cu(100) and Cu(111).

Project description:Oxidized copper surfaces have attracted significant attention in recent years due to their unique catalytic properties, including their enhanced hydrocarbon selectivity during the electrochemical reduction of CO2. Although oxygen plasma has been used to create highly active copper oxide electrodes for CO2RR, how such treatment alters the copper surface is still poorly understood. Here, we study the oxidation of Cu(100) and Cu(111) surfaces by sequential exposure to a low-pressure oxygen plasma at room temperature. We used scanning tunnelling microscopy (STM), low energy electron microscopy (LEEM), X-ray photoelectron spectroscopy (XPS), near edge X-ray absorption fine structure spectroscopy (NEXAFS) and low energy electron diffraction (LEED) for the comprehensive characterization of the resulting oxide films. O2-plasma exposure initially induces the growth of 3-dimensional oxide islands surrounded by an O-covered Cu surface. With ongoing plasma exposure, the islands coalesce and form a closed oxide film. Utilizing spectroscopy, we traced the evolution of metallic Cu, Cu2O and CuO species upon oxygen plasma exposure and found a dependence of the surface structure and chemical state on the substrate's orientation. On Cu(100) the oxide islands grow with a lower rate than on the (111) surface. Furthermore, while on Cu(100) only Cu2O is formed during the initial growth phase, both Cu2O and CuO species are simultaneously generated on Cu(111). Finally, prolonged oxygen plasma exposure results in a sandwiched film structure with CuO at the surface and Cu2O at the interface to the metallic support. A stable CuO(111) surface orientation is identified in both cases, aligned to the Cu(111) support, but with two coexisting rotational domains on Cu(100). These findings illustrate the possibility of tailoring the oxidation state, structure and morphology of metallic surfaces for a wide range of applications through oxygen plasma treatments.

| S-EPMC8565394 | biostudies-literature

Mechanism Investigations on Water Gas Shift Reaction over Cu(111), Cu(100), and Cu(211) Surfaces.

Project description:Cu-based catalysts are commonly applied in low-temperature water gas shift (WGS) reactions, owing to their low cost and high catalytic activity. The influence of different Cu surfaces on catalytic activity and mechanism over the WGS reaction remains unclear. In this work, the effect of different structures of surfaces on the WGS mechanism is studied using density functional theory (DFT). Three surface terminations (Cu(100), Cu(111), and Cu(211)) of Cu are considered, and the coordination number (CN) of the active Cu site is in the range from 7 to 9. The most stable surface is Cu(211). Then, d-band center values are calculated, which decrease in the following sequence: Cu(211) > Cu(100) > Cu(111). This shows that d-band center values decrease with increasing coordination number. The increase in the centers of the d-band leads to an increase in the adsorption strength of CO and H2O adsorbates, which is in line with the theory of the d-band center. In addition, the further calculated mechanism for WGS reaction over three different Cu surfaces illustrates that the carboxyl path is the most favorable mechanism, and the rate-determining step is H2O dissociation. Cu(211) shows excellent WGS catalytic performance, better than the Cu(100) and Cu(111) surfaces. This work provides theoretical insights into the rational design of highly active Cu-based catalysts toward WGS reaction.

| S-EPMC8811938 | biostudies-literature

Resolving the puzzle of single-atom silver dispersion on nanosized ?-Al2O3 surface for high catalytic performance.

Project description:Ag/?-Al2O3 is widely used for catalyzing various reactions, and its performance depends on the valence state, morphology and dispersion of Ag species. However, detailed anchoring mechanism of Ag species on ?-Al2O3 remains largely unknown. Herein, we reveal that the terminal hydroxyls on ?-Al2O3 are responsible for anchoring Ag species. The abundant terminal hydroxyls existed on nanosized ?-Al2O3 can lead to single-atom silver dispersion, thereby resulting in markedly enhanced performance than the Ag cluster on microsized ?-Al2O3. Density-functional-theory calculations confirm that Ag atom is mainly anchored by the terminal hydroxyls on (100) surface, forming a staple-like local structure with each Ag atom bonded with two or three terminal hydroxyls. Our finding resolves the puzzle on why the single-atom silver dispersion can be spontaneously achieved only on nanosized ?-Al2O3, but not on microsized ?-Al2O3. The obtained insight into the Ag species dispersion will benefit future design of more efficient supported Ag catalysts.

| S-EPMC6985108 | biostudies-literature

Structure of the (Bi)carbonate Adlayer on Cu(100) Electrodes.

Project description:(Bi)carbonate adsorption on Cu(100) in 0.1 M KHCO3 has been studied by in situ scanning tunneling microscopy. Coexistence of different ordered adlayer phases with ( 2${\sqrt{2}}$ ×6 2${\sqrt{2}}$ )R45° and (4×4) unit cells was observed in the double layer potential regime. The adlayer is rather dynamic and undergoes a reversible order-disorder phase transition at 0 V vs. the reversible hydrogen electrode. Density functional calculations indicate that the adlayer consists of coadsorbed carbonate and water molecules and is strongly stabilized by liquid water in the adjacent electrolyte.

| S-EPMC9827965 | biostudies-literature

Torso geometry reconstruction and body surface electrode localization using three-dimensional photography.

Project description:We conducted a prospective clinical study (n=14; 29% female) to assess the accuracy of a three-dimensional (3D) photography-based method of torso geometry reconstruction and body surface electrodes localization. The position of 74 body surface electrocardiographic (ECG) electrodes (diameter 5mm) was defined by two methods: 3D photography, and CT (marker diameter 2mm) or MRI (marker size 10×20mm) imaging. Bland-Altman analysis showed good agreement in X (bias -2.5 [95% limits of agreement (LoA) -19.5 to 14.3] mm), Y (bias -0.1 [95% LoA -14.1 to 13.9] mm), and Z coordinates (bias -0.8 [95% LoA -15.6 to 14.2] mm), as defined by the CT/MRI imaging, and 3D photography. The average Hausdorff distance between the two torso geometry reconstructions was 11.17±3.05mm. Thus, accurate torso geometry reconstruction using 3D photography is feasible. Body surface ECG electrodes coordinates as defined by the CT/MRI imaging, and 3D photography, are in good agreement.

| S-EPMC5776048 | biostudies-literature

Implementation of Geometry-Dependent Charge Flux into the Polarizable AMOEBA+ Potential.

Project description:Molecular dynamics (MD) simulations employing classical force fields (FFs) have been widely used to model molecular systems. The important ingredient of the current FFs, atomic charge, remains fixed during MD simulations despite the atomic environment or local geometry changes. This approximation hinders the transferability of the potential being used in multiple phases. Here we implement a geometry-dependent charge flux (GDCF) model into the multipole-based AMOEBA+ polarizable potential. The CF in the current work explicitly depends on the local geometry (bond and angle) of the molecule. To our knowledge, this is the first study that derives energy and force expressions due to GDCF in a multipole-based polarizable FF framework. Due to the inclusion of GDCF, the AMOEBA+ water model is noticeably improved in terms of describing the monomer properties, cluster binding/interaction energy, and a variety of liquid properties, including the infrared spectra that previous flexible water models were not able to capture.

| S-EPMC7384396 | biostudies-literature

Competing charge transfer pathways at the photosystem II-electrode interface.

Project description:The integration of the water-oxidation enzyme photosystem II (PSII) into electrodes allows the electrons extracted from water oxidation to be harnessed for enzyme characterization and to drive novel endergonic reactions. However, PSII continues to underperform in integrated photoelectrochemical systems despite extensive optimization efforts. Here we carried out protein-film photoelectrochemistry using spinach and Thermosynechococcus elongatus PSII, and we identified a competing charge transfer pathway at the enzyme-electrode interface that short-circuits the known water-oxidation pathway. This undesirable pathway occurs as a result of photo-induced O2 reduction occurring at the chlorophyll pigments and is promoted by the embedment of PSII in an electron-conducting fullerene matrix, a common strategy for enzyme immobilization. Anaerobicity helps to recover the PSII photoresponse and unmasks the onset potentials relating to the QA/QB charge transfer process. These findings impart a fuller understanding of the charge transfer pathways within PSII and at photosystem-electrode interfaces, which will lead to more rational design of pigment-containing photoelectrodes in general.

| S-EPMC5113757 | biostudies-literature

Twisted Intramolecular Charge Transfer (TICT) Controlled by Dimerization: An Overlooked Piece of the TICT Puzzle.

Project description:Organic dyes have shown high efficiencies in solar cells, which is mainly attributed to the push-pull strategy present in such dyes upon attaching to the semiconductor surfaces. We deeply studied the fundamental photophysical properties of cyanoacrylic dyes, mostly the L1 dye, and found unique emission properties that depend on many factors such as the solvent polarity and the concentration of the dye and could present a complete emission picture about this family of dyes. The L1 dye shows an intramolecular charge transfer (ICT) emission state at low concentrations (approximately nanomolar scale) and shows a twisted intramolecular charge transfer (TICT) emission state in specific solvents upon increasing the concentration to the micromolar scale. Moreover, the associated emission lifetimes of the ICT and TICT states of the L1 dye depend on solvent basicity, highlighting the role of hydrogen bond formation on controlling such states. Density functional theory calculations are performed to gain insight into the photophysical properties of the dye and revealed that H-bonding between the carboxylic groups triggers the dimerization at low concentrations. Using femtosecond transient absorption, we assigned the rate of TICT formation to be in the range (160-650 fs)-1, depending on the size of the studied cyanoacrylic dye. Therefore, we add herein a new dimension for controlling the formation of the TICT state, in addition to the solvent polarity and acceptor strength parameters. These findings are not limited to the studied dyes, and we expect that numerous organic carboxylic acids dyes show similar properties.

| S-EPMC8154600 | biostudies-literature

Design and Construction of Cu(OH)2/Ni3S2 Composite Electrode on Cu Foam by Two-Step Electrodeposition.

Project description:A Cu(OH)2/Ni3S2 composite has been designed and in situ constructed on Cu foam substrate by facile two-step electrodeposition. Cu(OH)2 is achieved on Cu foam by galvanostatic electrodeposition, and the subsequent coating of Ni3S2 is realized by cyclic voltammetric (CV) electrodeposition. The introduction of Cu(OH)2 provides skeleton support and a large specific surface area for the Ni3S2 electrodeposition. Benefiting from the selection of different components and preparation technology, the Cu(OH)2/Ni3S2 composite exhibits enhanced electrochemical properties with a high specific capacitance of 4.85 F cm-2 at 2 mA cm-2 and long-term cyclic stability at 80.84% (4000 cycles).

| S-EPMC8878843 | biostudies-literature

Carbons with Regular Pore Geometry Yield Fundamental Insights into Supercapacitor Charge Storage.

Project description:We conduct molecular dynamics simulations of electrical double-layer capacitors (EDLCs) using a library of ordered, porous carbon electrode materials called zeolite templated carbons (ZTCs). The well-defined pore shapes of the ZTCs enable us to determine the influence of pore geometry on both charging dynamics and charge storage mechanisms in EDLCs, also referred to as supercapacitors. We show that charging dynamics are negatively correlated with the pore-limiting diameter of the electrode material and display signatures of both progressive charging and ion trapping. However, the equilibrium capacitance, unlike charging dynamics, is not strongly correlated to commonly used, purely geometric descriptors such as pore size. Instead, we find a strong correlation of capacitance to the charge compensation per carbon (CCpC), a descriptor we define in this work as the average charge of the electrode atoms within the coordination shell of a counterion. A high CCpC indicates efficient charge storage, as the strong partial charges of the electrode are able to screen counterion charge, enabling higher ion loading and thus more charge storage within the electrode at a fixed applied voltage. We determine that adsorption sites with a high CCpC tend to be found within pockets with a smaller radius of curvature, where the counterions are able to minimize their distance with multiple points on the electrode surface, and therefore induce stronger local partial charges.

| S-EPMC6891853 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data