Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fluorescent Sensor for Copper(II) and Cyanide Ions via the Complexation-Decomplexation Mechanism with Di(bissulfonamido)spirobifluorene.

ABSTRACT: A novel spirobifluorene derivative bearing two bissulfonamido groups is successfully synthesized by Sonogashira coupling. This compound exhibits a strong fluorescence quenching by Cu(II) ion in a 50% mixture between acetonitrile and 20 mM pH 7.0 N-(2-hydroxyethyl)piperazine-N'-ethanesulfonic acid (HEPES) buffer with a detection limit of 98.2 nM. However, this sensor also shows ratiometric signal shifts from blue to yellow in the presence of Zn(II), Pb(II), and Hg(II) ions. The static quenching mechanism is verified by the signal reversibility using ethylenediaminetetraacetic acid (EDTA) and the Stern-Volmer plots at varying temperatures. The Cu(II)-spirobifluorene complex shows a highly selective fluorescence enhancement upon the addition of CN^- ion with the detection limit of 390 nM. The application of this complex for quantitative analysis of spiked CN^- ion in real water samples resulted in good recoveries.

SUBMITTER: Silpcharu K

PROVIDER: S-EPMC8246698 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Peptoid-Based Fluorescent Sensor for Cyanide Detection.

Project description:Peptoids, N-substituted glycine oligomers, are versatile peptidomimetics with diverse biomedical applications. However, strategies to the development of novel fluorescent peptoids as chemical sensors have not been extensively explored, yet. Here, we synthesized a novel peptoid-based fluorescent probe in which a coumarin moiety was incorporated via copper(I)-catalyzed azide-alkyne cycloaddition reaction. Fluorescence of the newly generated coumarin-peptoid was dramatically quenched upon coordination of the Cu(2+) ion, and the resulting peptoid-Cu(2+) complex exhibited significant Turn-ON fluorescence following the addition of CN(-). The rapid and reversible response, combined with cyanide selectivity of the synthesized peptoid, reflects a multistep photo-process and supports its utility as a new type of CN(-) sensor.

| S-EPMC6273317 | biostudies-literature

Study on Removal Mechanism for Copper Cyanide Complex Ions in Water: Ion Species Differences and Evolution Process.

Project description:A large amount of cyanide-containing wastewater is discharged during electrode material synthesis. Among them, cyanides will form metal-cyanide complex ions which possess high stability, making it challenging to separate them from these wastewaters. Therefore, it is imperative to understand the complexation mechanism of cyanide ions and heavy metal ions from wastewater in order to obtain a deep insight into the process of cyanide removal. This study employs Density Functional Theory (DFT) calculations to reveal the complexation mechanism of metal-cyanide complex ions formed by the interaction of Cu+ and CN- in copper cyanide systems and its transformation patterns. Quantum chemical calculations show that the precipitation properties of Cu(CN)43- can assist in the removal of CN-. Therefore, transferring other metal-cyanide complex ions to Cu(CN)43- can achieve deep removal. OLI studio 11.0 analyzed the optimal process parameters of Cu(CN)43- under different conditions and determined the optimal process parameters of the removal depth of CN-. This work has the potential to contribute to the future preparation of related materials such as CN- removal adsorbents and catalysts and provide theoretical foundations for the development of more efficient, stable, and environmentally friendly next-generation energy storage electrode materials.

| S-EPMC10048877 | biostudies-literature

Metal oxide QD based ultrasensitive microsphere fluorescent sensor for copper, chromium and iron ions in water.

Project description:Herein we developed a rapid, cheap, and water-soluble ultra-sensitive ZnO quantum dot (QD) based metal sensor for detecting different hazardous metal ions up to the picomolar range in water. Various spectroscopic and microscopic techniques confirmed the formation of 2.15 ± 0.46 μm of ZnO QD conjugated CMC microspheres (ZCM microspheres) which contain 5.5 ± 0.5 nm fluorescent zinc oxide (ZnO) QDs. Our system, as a promising sensor, exhibited excellent photostability and affinity towards various heavy metal ions. The detection limits were calculated to be 16 pM for Cu2+ and 0.18 nM for Cr6+ ions which are better than previously reported values. The simple fluorescence 'turn off' property of our ZCM microsphere sensor system can serve a two-in-one purpose by not only detecting the heavy metals but also quantifying them. Nonetheless, pattern recognition for different heavy metals helped us to detect and identify multiple heavy metal ions. Finally, their practical applications on real samples also demonstrated that the ZCM sensor can be effectively utilized for detection of Cr6+, Fe3+, Cu2+ present in the real water samples. This study may inspire future research and design of target fluorescent metal oxide QDs with specific functions.

| S-EPMC9050156 | biostudies-literature

A Telechelic Fluorescent Indicator Based on Polymer Conformational Change for Free Copper(II) Ions

Project description: Not available

| S-EPMC10708570 | biostudies-literature

A novel dihydro phenylquinazolinone-based two-in-one colourimetric chemosensor for nickel(ii), copper(ii) and its copper complex for the fluorescent colourimetric nanomolar detection of the cyanide anion.

Project description:Currently, considerable efforts have been devoted to the detection and quantification of hazardous multi-analytes using a single probe. Herein, we have developed a simple, environment-friendly colourimetric sensor for the sensitive, selective and rapid detection of Ni2+ and Cu2+ ions using a simple organic Schiff base ligand L in methanol-Tris-HCl buffer (1 : 1 v/v, 10 mM, pH = 7.2). The probe L exhibited a binding-induced colour change from colourless to yellow and fluorescence quenching in the presence of both Ni2+ and Cu2+ ions. The interactions between L and the respective metal ions were studied by Job's plot, electrospray ionisation-mass spectrometry (ESI-MS), Fourier-transform infrared spectroscopy (FT-IR), density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations. The limit of detection (LOD) of L towards Ni2+ and Cu2+ was calculated to be 7.4 × 10-7 M and 4.9 × 10-7 M, respectively. Furthermore, the L-Cu2+ complex could be used as a new cascade fluorescent-colourimetric sensor to detect CN- ions with a very low level of detection (40 nM). Additionally, L could operate in a wide pH range, and thus was successfully applied for the detection and quantification of Ni2+ and Cu2+ in environmental samples, and for building OR- and IMPLICATION-type logic gates.

| S-EPMC9058604 | biostudies-literature

A Pentapeptide with Tyrosine Moiety as Fluorescent Chemosensor for Selective Nanomolar-Level Detection of Copper(II) Ions.

Project description:Herein, we have investigated principally with the use of UV and fluorescence (steady-state and time-resolved) spectroscopy the interactions between selected pentapeptides with tyrosine residue (EYHHQ, EHYHQ, EHHQY, and KYHHE) and various metal ions (Cu2+, Mn2+, Co2+, Ni2+, Zn2+, Cr3+, Cd2+, Ag+, Pb2+, Sr2+, Ba2+, Ca2+, Mg2+, Al3+, Fe2+, and Ga3+) in order to establish the relationship between the position of a tyrosine residue in the peptide sequence and the metal ion-binding properties. Among the peptides studied, EHYHQ was evaluated as an efficient and selective ligand for developing a chemosensor for the detection of copper(II) ions. While significant fluorescence emission quenching was observed for that peptide in the presence of Cu2+ cations, other metal cations used at the same and at considerably higher concentrations caused a negligible change of the fluorescence emission spectrum, indicating a high selectivity of EHYHQ for Cu2+ ions. Under optimum conditions, fluorescence intensity was inversely proportional to the concentration of Cu2+ ions. The limit of detection of Cu2+ ions with the use of EHYHQ was determined at the level of 26.6 nM. The binding stoichiometry of the complexes of the studied peptides with Cu2+ ions was evaluated spectrophotometrically and fluorimetrically (as in the case of EHYHQ confirmed by mass spectrometry) and found to be 1:2 (Cu2+-peptide) for all the investigated systems. Furthermore, the stability constant (K) values of these complexes were determined. The reversibility of the proposed Cu2+ ions sensor was confirmed, the pH range where the sensor acts was determined, while its analytical performance was compared with some other reported recently fluorescent sensors. The mechanism of the interactions between EHYHQ and Cu2+ was proposed on the basis of NMR spectroscopy investigations.

| S-EPMC7037753 | biostudies-literature

A sensitive and selective BINOL based ratiometric fluorescence sensor for the detection of cyanide ions.

Project description:A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN-). The optical study revealed that BBCN exhibited unique spectral changes only with cyanide ions in the presence of other competing ions. Besides, an apparent fluorescent colour change from green to blue was observed. A clear linear relationship was observed between the fluorescence ratiometric ratio of BBCN and the concentration of CN- with a reasonably low detection limit (LOD) of 189 nM (507 ppb). The optical response was due to the nucleophilic addition of CN- to the dicyanovinyl group of the sensor, which compromises the probe's intramolecular charge transfer. This mechanism was well confirmed by Job's plot, 1H-NMR and ESI-MS studies. BBCN showed immediate spectral response towards (1 second) CN- and detection could be realized in a broad pH window. Furthermore, the practical utility of BBCN was studied by test paper-based analysis and the detection of CN- in various water resources.

| S-EPMC9029250 | biostudies-literature

Synthesis of a novel fluorescent sensor bearing dansyl fluorophores for the highly selective detection of mercury (II) ions.

Project description:A new macromolecule possessing two dansyl moieties and based on 2-[4-(2-aminoethylthio)butylthio]ethanamine was prepared as a fluorescent sensor and its mercury sensing properties toward various transition metal, alkali, and alkali earth ions were investigated. The designed compound exhibited pronounced Hg2+-selective ON-OFF type fluorescence switching upon binding. The new compound provided highly selective sensing to Hg2+ in acetonitrile-water solvent mixtures with a detection limit of 2.49 x 10(-7) M or 50 ppb. The molecular modeling results indicated that ions-recognition of the sensor originated from a self assembly process of the reagent and Hg2+ to form a helical wrapping structure with the favorable electrostatic interactions of Hg2+coordinated with sulfur, oxygen, nitrogen atoms and aromatic moieties.

| S-EPMC6257345 | biostudies-literature

Fluorescent Mechanism of a Highly Selective Probe for Copper(II) Detection: A Theoretical Study

Project description:A highly selective probe for copper(II) detection based

| S-EPMC10193560 | biostudies-literature

A selective detection approach for copper(ii) ions using a hydrazone-based colorimetric sensor: spectroscopic and DFT study.

Project description:The development of an efficient and miniaturized analytical approach to determine trace levels of toxic ions in aqueous fluids presents a current research challenge. Hydrazone-based chemosensors are considered potential candidates due to their high sensitivity and selectivity towards heavy metal ions. Computational techniques can be properly implemented to elucidate possible modes of ligand-metal interaction and provide an in-depth understanding of the chemistry involved. The present study reports the use of 3-hydroxy-5-nitrobenzaldehyde-4-hydroxybenzoylhydrazone (3-HNHBH) ligand for highly sensitive, quick and re-usable colorimetric sensing of copper(ii) ions in aqueous media. DFT calculations suggest that the complexation of 3-HNHBH with copper(ii) ions adopts a seesaw coordination geometry and results in the largest HOMO-LUMO gap and most effective coulombic interaction compared to Zn and Ni counterparts. It demonstrated a high selectivity towards copper ions with a detection limit of 0.34 μg L-1. The ligand was readily regenerated using a 0.5 M HCl solution, indicating its feasibility to be used as a re-usable sensor for the convenient detection of copper ions in aqueous media. The influence of metal interference, pH and solvents on the selectivity and regeneration of the ligand was also investigated.

| S-EPMC9091284 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data