Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Heptazine-Based π-Conjugated Materials for Light-Emitting.

ABSTRACT: On the basis of planar and relatively rigid nitrogen-rich heterocyclic system of the heptazine core, heptazine-based π-conjugated materials have aroused widespread attention over the past decade by virtue of the fascinating electronic, optical, thermal, and mechanical properties in the fields of light-emitting, photocatalysis, sensors, environmental remediation, and so forth. However, there are still several obstacles to be solved before practical applications, such as low photoluminescence quantum efficiencies for light-emitting and weak visible absorption for photocatalysis. To further enhance various properties of heptazine-based π-conjugated materials, a series of strategies have been developed, including ingenious molecular design and modification, novel synthetic, and preparation methods. In this review, the significant progress of monomeric and polymeric heptazine-based π-conjugated materials and their applications typically in light-emitting are reviewed, which is beneficial for the acceleration of practical applications of heptazine-based materials and devices.

SUBMITTER: Li J

PROVIDER: S-EPMC8249734 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhanced Electroluminescence Based on a <i>π</i>-Conjugated Heptazine Derivative by Exploiting Thermally Activated Delayed Fluorescence.

Project description:Heptazine derivatives have attracted much attention over the past decade by virtue of intriguing optical, photocatalytic as well as electronic properties in the fields of hydrogen evolution, organic optoelectronic technologies and so forth. Here, we report a simple π-conjugated heptazine derivative (HAP-3DF) possessing an n→π* transition character which exhibits enhanced electroluminescence by exploiting thermally activated delayed fluorescence (TADF). Green-emitting HAP-3DF shows relatively low photoluminescence quantum efficiencies (Φ p) of 0.08 in toluene and 0.16 in doped film with bis(2-(diphenylphosphino)phenyl) ether oxide (DPEPO) as the matrix. Interestingly, the organic light-emitting diode (OLED) incorporating 8 wt% HAP-3DF:DPEPO as an emitting layer achieved a high external quantum efficiency (EQE) of 3.0% in view of the fairly low Φ p of 0.16, indicating the presence of TADF stemming from n→π* transitions. As the matrix changing from DPEPO to 1,3-di (9H-carbazol-9-yl)benzene (mCP), a much higher Φ p of 0.56 was found in doped film accompanying yellow emission. More importantly, enhanced electroluminescence was observed from the OLED containing 8 wt% HAP-3DF:mCP as an emitting layer, and a rather high EQE of 10.8% along with a low roll-off was realized, which should be ascribed to the TADF process deriving from exciplex formation.

| S-EPMC8155250 | biostudies-literature

Through-Space Conjugated Electron Transport Materials for Improving Efficiency and Lifetime of Organic Light-Emitting Diodes.

Project description:Thermally stable electron transport (ET) materials with high electron mobility and high triplet state energy level are highly desired for the fabrication of efficient and stable organic light-emitting diodes (OLEDs). Herein, a new design strategy of constructing through-space conjugated folded configuration is proposed to explore robust ET materials, opposite to the widely used planar configuration. By bonding two quinolines to the 9,10-positions of phenanthrene, two novel folded molecules with high thermal and morphological stabilities and high triplet state energy levels (>2.7 eV) are created. These folded molecules possess excellent ET ability with electron mobilities of three orders of magnitude higher than those of linear and planar counterparts. Theoretical calculation and crystallography analysis demonstrate the through-space conjugated folded configuration has not only reduced reorganization energy but also enlarged charge transfer integral at various dimensions, bringing about efficient multi-dimensional ET, independent of molecular orientation. By adopting the folded molecule as ET layers, OLEDs with no matter delayed fluorescence or phosphorescence emitters can achieve high external quantum efficiencies and long operational lifetimes simultaneously. This work paves a new avenue towards robust ET materials to improve efficiency and stability of OLEDs.

| S-EPMC9130898 | biostudies-literature

Efficient Exciplex-Based Deep-Blue Organic Light-Emitting Diodes Employing a Bis(4-fluorophenyl)amine-Substituted Heptazine Acceptor.

Project description:The realization of a deep-blue-emitting exciplex system is a herculean task in the field of organic light-emitting diodes (OLEDs) on account of a large red-shifted and broadened exciplex emission spectrum in comparison to those of the corresponding single compounds. Herein, 2,5,8-tris(di(4-fluorophenyl)amine)-1,3,4,6,7,9,9b-heptaazaphenalene (HAP-3FDPA) was designed as an electron acceptor by integrating three bis(4-fluorophenyl)amine groups into a heptazine core, while 1,3-di(9H-carbazol-9-yl)benzene (mCP) possessing two electron-donating carbazole moieties was chosen as the electron donor. Excitingly, the exciplex system of 8 wt% HAP-3FDPA:mCP exhibited deep-blue emission and a high photoluminescence quantum yield of 53.2%. More importantly, an OLED containing this exciplex system as an emitting layer showed deep-blue emission with Commission Internationale de l'Eclairage coordinates of (0.16, 0.12), a peak luminance of 15,148 cd m-2, and a rather high maximum external quantum efficiency of 10.2% along with a low roll-off. This study not only reports an efficient exciplex-based deep-blue emitter but also presents a feasible pathway to construct highly efficient deep-blue OLEDs based on exciplex systems.

| S-EPMC8466596 | biostudies-literature

Rational Design of π-Conjugated Tricoordinated Organoboron Derivatives With Thermally Activated Delayed Fluorescent Properties for Application in Organic Light-Emitting Diodes.

Project description:A series of donor-acceptor (D-A) tricoordinated organoboron derivatives (1-10) have been systematically investigated for thermally activated delayed fluorescent (TADF)-based organic light-emitting diode (OLED) materials. The calculated results show that the designed molecules exhibit small singlet-triplet energy gap (ΔE ST) values. Density functional theory (DFT) analysis indicated that the designed molecules display an efficient separation between donor and acceptor fragments because of a small overlap between donor and acceptor fragments on HOMOs and LUMOs. Furthermore, the delayed fluorescence emission color can be tuned effectively by introduction of different polycyclic aromatic fragments in parent molecule 1. The calculated results show that molecules 2, 3, and 4 possess more significant Stokes shifts and red emission with small ΔE ST values. Nevertheless, other molecules exhibit green (1, 7, and 8), light green (6 and 10), and blue (5 and 9) emissions. Meanwhile, they are potential ambipolar charge transport materials except that 4 and 10 can serve as electron and hole transport materials only, respectively. Therefore, we proposed a rational way for the design of efficient TADF materials as well as charge transport materials for OLEDs simultaneously.

| S-EPMC7554541 | biostudies-literature

Development of Novel Solid-State Light-Emitting Materials Based on Pentafluorinated Tolane Fluorophores.

Project description:We herein describe the synthesis of novel pentafluorinated tolane fluorophores, which possess an extended π-conjugated structure with a large molecular dipole moment along the longitudinal axis. We also report a detailed evaluation of both the photophysical and thermal behaviors of these fluorophores. All molecules displayed photoluminescence (PL) characteristics in both the crystalline state and in dilute solutions. The large longitudinal dipole moment induced solvatochromic PL behavior, which switched sensitively with changes in the solvent polarity. In addition, incorporation of the fluorinated tolane-based solid-state light-emitting moiety into the polymer side chain was found to be responsible for the PL characteristics observed in the solid state. It was also noteworthy that the polymerization protocol led to a significant enhancement in the thermal stability, with the thermal decomposition temperature increased by 90 °C. Accordingly, novel solid-state light-emitting materials with high thermal stabilities were successfully developed as promising candidates for use in light-emitting and optoelectronic applications.

| S-EPMC6644817 | biostudies-literature

Phosphine Sulfide-Based Bipolar Host Materials for Blue Phosphorescent Organic Light-Emitting Diodes.

Project description:Three phosphine sulfide-based bipolar host materials, vizCzPhPS, DCzPhPS, and TCzPhPS, were facilely prepared through a one-pot synthesis in excellent yields. The developed hosts exhibit superior thermal stabilities with the decomposition temperatures (Td) all exceeding 350 °C and the melting temperatures (Tm) over 200 °C. In addition, their triplet energy (ET) levels are estimated to be higher than 3.0 eV, illustrating that they are applicable to serve as hosts for blue phosphorescent organic light-emitting diodes (PhOLEDs). The maxima luminance, current efficiency (CE), power efficiency (PE), and external quantum efficiency (EQE) of 17,223 cd m-2, 36.7 cd A-1, 37.5 lm W-1, and 17.5% are achieved for the blue PhOLEDs hosted by CzPhPS. The PhOLEDs based on DCzPhPS and TCzPhPS show inferior device performance than that of CzPhPS, which might be ascribed to the deteriorated charge transporting balance as the increased number of the constructed carbazole units in DCzPhPS and TCzPhPS molecules would enhance the hole-transporting ability of the devices to a large extent. Our study demonstrates that the bipolar hosts derived from phosphine sulfide have enormous potential applications in blue PhOLEDs, and the quantity of donors should be well controlled to exploit highly efficient phosphine sulfide-based hosts.

| S-EPMC8271492 | biostudies-literature

Novel Conjugated Side Chain Fluorinated Polymers Based on Fluorene for Light-Emitting and Ternary Flash Memory Devices.

Project description:Three novel conjugated polymers based on 9,9'-dioctylfluorene unit and isoindolo[2,1-a]benzimidazol-11-one with different fluorine substituents (0, 2 and 4) were synthesized. PLED and resistive memory devices based on these polymers were prepared consequently. PLED based on four-fluorinated polymer showed the highest maximum brightness of 3192?cd?m-2 with almost 5-fold increase of current efficiency 8-fold increase of external quantum efficiency compared to that of the other two, and all the PLEDs exhibited good emission stability with no noticeable change of electroluminescence even under high voltage of 10?V. The memory device of doubly-fluorinated polymer exhibited ternary flash behavior with threshold voltages below -2.5?V, while device of four-fluorinated polymer possessed ON/OFF current ratio above 104. Impact of fluorine substitutions on the performance of devices were briefly investigated. The results revealed that the improvement of device performance might not scale with the increasing number of fluorine substitutions, and the four-fluorine-substituted polymer and doubly-fluorinated polymer could be encouraging materials for applications of PLED and resistive memory device and worth of further design of other new polymer systems.

| S-EPMC6797500 | biostudies-literature

Stacking multiple connecting functional materials in tandem organic light-emitting diodes.

Project description:Tandem device is an important architecture in fabricating high performance organic light-emitting diodes and organic photovoltaic cells. The key element in making a high performance tandem device is the connecting materials stack, which plays an important role in electric field distribution, charge generation and charge injection. For a tandem organic light-emitting diode (OLED) with a simple Liq/Al/MoO3 stack, we discovered that there is a significant current lateral spreading causing light emission over an extremely large area outside the OLED pixel when the Al thickness exceeds 2?nm. This spread light emission, caused by an inductive electric field over one of the device unit, limits one's ability to fabricate high performance tandem devices. To resolve this issue, a new connecting materials stack with a C60 fullerene buffer layer is reported. This new structure permits optimization of the Al metal layer in the connecting stack and thus enables us to fabricate an efficient tandem OLED having a high 155.6?cd/A current efficiency and a low roll-off (or droop) in current efficiency.

| S-EPMC5320488 | biostudies-literature

Rational design of quinoxaline-based bipolar host materials for highly efficient red phosphorescent organic light-emitting diodes.

Project description:Two novel bipolar carbazole/diphenylquinoxaline-based host materials 3-(2,3-diphenylquinoxalin-6-yl)-9-phenyl-9H-carbazole (M1) and 3-(4-(2,3-diphenylquinoxalin-6-yl)phenyl)-9-phenyl-9H-carbazole (M2) have been rationally designed and synthesized. The phenyl spacer between the functionalized quinoxaline moiety and the carbazole moiety is also introduced to investigate its influence on their photophysical properties. The chemical structures, and thermal, photophysical and electrochemical properties of the two host materials were characterized and explored in detail. Red phosphorescent light-emitting diodes with M1 and M2 as hosts were prepared to explore their electroluminescent properties. Both M1 and M2 host-based red devices exhibit outstanding electroluminescent performance. For example, two red devices all realize good red emission with the maximum at 594 nm, the maximum external quantum efficiency and luminance can reach 14.66% and 28 619 cd m-2 for M1-based devices and 15.07% and 28 818 cd m-2 for M2-based devices, indicating compounds M1 and M2 designed in this work have potential applications in the development of high-performance monochrome and white OLEDs.

| S-EPMC9062477 | biostudies-literature

Dopant-Free π-Conjugated Hole Transport Materials for Highly Stable and Efficient Perovskite Solar Cells.

Project description:Current high-efficiency hybrid perovskite solar cells (PSCs) have been fabricated with doped hole transfer material (HTM), which has shown short-term stability. Doping applied in HTMs for PSCs can enhance the hole mobility and PSCs' power conversion efficiency, while the stability of PSCs will be significantly decreased due to inherent hygroscopic properties and chemical incompatibility. Development of dopant-free HTM with high hole mobility is a challenge and of utmost importance. In this review, a series of selected and typical π-conjugated dopant-free hole transport materials, mainly regarding small molecules, are reviewed, which could consequently help to further design high-performance dopant-free HTMs. In addition, an outline of the molecular design concept and also the perspective of ideal dopant-free HTMs were explored.

| S-EPMC8012559 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data