Differences in the effects of BMI on bone microstructure between loaded and unloaded bones assessed by HR-pQCT in Japanese postmenopausal women.
Ontology highlight
ABSTRACT: Objectives
The relationship between weight-related load and bone mineral density (BMD)/bone microstructure under normal load conditions using high-resolution peripheral quantitative computed tomography (HR-pQCT) remains unconfirmed. The study aims to investigate the differences in effect of body mass index (BMI) on BMD/bone microstructure of loaded and unloaded bones, respectively, in Japanese postmenopausal women.Methods
Fifty-seven postmenopausal women underwent HR-pQCT on the tibia and radius. Correlation analysis, principal component (PC) analysis, and hierarchical multiple regression were performed to examine the relationship between BMI and HR-pQCT parameters.Results
Several microstructural parameters of the tibia and radius correlated with BMI through a simple correlation analysis, and these relationships remained unchanged even with an age-adjusted partial correlation analysis. PC analysis was conducted using seven bone microstructure parameters. The first PC (PC1) reflected all parameters of trabecular and cortical bone microstructures, except for cortical porosity, whereas the second PC (PC2) reflected only cortical bone microstructure. Hierarchical multiple regression analysis indicated that BMI was more strongly related to BMD/bone microstructure in the tibia than in the radius. Furthermore, BMI was associated with trabecular/cortical BMD, and PC1 (not PC2) of the tibia and radius. Thus, BMI was strongly related to the trabecular bone microstructure rather than the cortical bone microstructure.Conclusions
Our data confirmed that BMI is associated with volumetric BMD and trabecular bone microstructure parameters in the tibia and radius. However, although BMI may be more related to HR-pQCT parameters in the tibia than in the radius, the magnitude of association is modest.
SUBMITTER: Fujii N
PROVIDER: S-EPMC8261728 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Numerous clinical cohorts are exposed to reduced skeletal loading and associated bone loss, including surgical patients, stroke and spinal cord injury victims, and women on bed rest during pregnancy. In this context, understanding disuse-related bone loss is critical to developing interventions to prevent fractures and the associated morbidity, mortality, and cost to the health care system. The aim of this pilot study was to use high-resolution peripheral QCT (HR-pQCT) to examine changes in trabecular and cortical microstructure and biomechanics during a period of non weight bearing (WB) and during recovery following return to normal WB. Surgical patients requiring a 6-week non WB period (n=12, 34.8±7.7 yrs) were scanned at the affected and contralateral tibia prior to surgery, after the 6-week non WB period, and 6 and 13 weeks after returning to full WB. At the affected ultradistal tibia, integral vBMD (including both trabecular and cortical compartments) decreased with respect to baseline (-1.2%), trabecular number increased (+5.6%), while trabecular thickness (-5.4%), separation (-4.6%), and heterogeneity (-7.2%) decreased (all p<0.05). Six weeks after return to full WB, trabecular structure measures reverted to baseline levels. In contrast, integral vBMD continued to decrease after 6 (-2.0%, p<0.05) and 13 weeks (-2.5%, p=0.07) of full WB. At the affected distal site, the disuse period resulted in increased porosity (+16.1%, p<0.005), which remained elevated after 6 weeks (+16.8%, p<0.01) and after 13 weeks (+16.2%, p<0.05). A novel topological analysis applied to the distal tibia cortex demonstrated increased number of canals with surface topology ("slabs" +21.7%, p<0.01) and curve topology ("tubes" +15.0%, p<0.05) as well as increased number of canal junctions (+21.4%, p<0.05) following the disuse period. Porosity increased uniformly through increases in both pore size and number. Finite element analysis at the ultradistal tibia showed decreased stiffness and failure load (-2.8% and -2.4%, p<0.01) following non WB. These biomechanical predictions remained depressed following 6 and 13 weeks of full WB. Finite element analysis at the distal site followed similar trends. Our results suggest that detectable microstructural and biomechanical degradation occurs--particularly within the cortical compartment--as a result of non WB and persists following return to normal loading. A better understanding of these microstructural changes and their short- and long-term influence on biomechanics may have clinical relevance in the context of disuse-related fracture prevention.
| S-EPMC4041600 | biostudies-literature
Project description:Black women have lower fracture risk compared with white women, which may be partly explained by improved volumetric bone mineral density (vBMD) and bone microarchitecture primarily within the cortical bone compartment. To determine if there are differences in trabecular microstructure, connectivity, and alignment according to race/ethnicity, we performed individual trabecular segmentation (ITS) analyses on high-resolution peripheral quantitative computed tomography (HR-pQCT) scans of the distal radius and tibia in 273 peri- and postmenopausal black (n = 100) and white (n = 173) women participating in the Study of Women's Health Across the Nation in Boston. Unadjusted analyses showed that black women had greater trabecular plate volume fraction, plate thickness, plate number density, and plate surface area along with greater axial alignment of trabeculae, whereas white women had greater trabecular rod tissue fraction (p < 0.05 for all). Adjustment for clinical covariates augmented these race/ethnicity-related differences in plates and rods, such that white women had greater trabecular rod number density and rod-rod connectivity, whereas black women continued to have superior plate structural characteristics and axial alignment (p < 0.05 for all). These differences remained significant after adjustment for hip BMD and trabecular vBMD. In conclusion, black women had more plate-like trabecular morphology and higher axial alignment of trabeculae, whereas white women had more rod-like trabeculae. These differences may contribute to the improved bone strength and lower fracture risk observed in black women. © 2016 American Society for Bone and Mineral Research.
| S-EPMC5413370 | biostudies-literature
Project description:PurposeIn adults with long-term HIV infection, low bone density and increased fracture risk have emerged as significant comorbidities. Our aim was to assess the association of exercise, nutrition, and medications with bone quality in adults with long-term HIV infection.MethodsForty-three adults with HIV infection were enrolled (median BMI 25.7, range 18.2-35.6 kg/m2; median age 57, range 50-69 years). Participants underwent ultradistal radius and tibia high-resolution peripheral quantitative CT (HR-pQCT). Questionnaires included the revised Community Healthy Activities Model Program for Seniors (CHAMPS), the Mini Nutritional Assessment (MNA) as well as medication assessments. Multivariable linear regression models were used to evaluate the association of exercise, nutritional status, tenofovir disoproxil fumarate (TDF) and protease inhibitor (PI) use with bone density and microstructure, adjusting for demographic risk factors.ResultsIn regression models, higher nutrition scores were associated with higher tibia cortical thickness (R2 = 0.23; β = 0.03; p = 0.044) and higher radius cortical BMD (R2 = 0.43; β = 8.4; p = 0.026). Higher weekly frequency of all physical activities was significantly associated with higher radius trabecular BMD (R2 = 0.38; β = 0.96; p = 0.050), higher radius trabecular number (R2 = 0.31; β = 0.01; p = 0.026), lower tibia and radius trabecular separation (tibia: R2 = 0.30; β = -0.003; p = 0.038; radius: R2 = 0.35; β = -0.003; p = 0.021), and higher radius bone stiffness (R2 = 0.45; β = 0.38; p = 0.047). Higher frequency of bone loading physical activities was significantly associated with higher tibia trabecular density (R2 = 0.44; β = 4.06; p = 0.036), higher tibia bone stiffness (R2 = 0.46; β = 3.06; p = 0.050), and higher tibia estimated failure load (R2 = 0.46; β = 0.17; p = 0.049). TDF used in combination with a PI was associated with lower radius trabecular BMD (R2 = 0.39; β = -41.2; p = 0.042), lower radius trabecular number (R2 = 0.34; β = -0.44; p = 0.009) and greater radius trabecular separation (R2 = 0.42; β = 0.16; p = 0.002), while TDF use without a PI was not associated with reduced bone quality.ConclusionsIn adults with HIV infection, malnutrition is associated with poor cortical bone quality, while reduced frequency of physical activities and specifically reduced frequency of mechanical loading activities are associated with deficient trabecular bone structure and reduced estimates of bone strength. TDF use in combination with a PI is associated with deleterious effects on trabecular bone structure.
| S-EPMC10259492 | biostudies-literature
Project description:The investigation of cortical porosity is an important aspect of understanding biological, pathoetiological, and biomechanical processes occurring within the skeleton. With the emergence of HR-pQCT as a noninvasive tool suitable for clinical use, cortical porosity at appendicular sites can be directly visualized in vivo. The aim of this study was to introduce a novel topological analysis of the cortical pore network for HR-pQCT data and determine the influence of resolution on measures of cortical pore network microstructure and topology.Cadaveric radii were scanned using HR-pQCT at two different voxel sizes (41 and 82 μm) and also using μCT at a voxel size of 18 μm. HR-pQCT and μCT image sets were spatially coregistered. Segmentation and quantification of cortical porosity (Ct.Po) and mean pore diameter (Ct.Po.Dm) were achieved using an established extended cortical analysis technique. Topological classification of individual pores was performed using topology-preserving skeletonization and multicolor dilation algorithms. Based on the pore skeleton topological classification, the following parameters were quantified: total number of planar surface-skeleton canals (N.Slabs), tubular curve-skeleton canals (N.Tubes), and junction elements (N.Junctions), mean slab volume (Slab.Vol), mean tube volume (Tube.Vol), mean slab orientation (Slab.θ), mean tube orientation (Tube.θ), N.Slabs/N.Tubes, and integral (total) slab volume/integral tube volume (iSlab.Vol/iTube.Vol). An in vivo reproducibility study was also conducted to assess short-term precision of the topology parameters. Precision error was characterized using root mean square coefficient of variation (RMSCV%).Correlations to μCT values for Ct.Po were significant for both the 41 and 82 μm HR-pQCT data (41: r(2) = 0.82, p < 0.001, 82: r(2) = 0.75, p < 0.001). For Ct.Po.Dm, only the 41 μm data were significantly predictive of μCT values (r(2) = 0.72, p < 0.01) Data at both HR-pQCT voxel sizes were strongly predictive of the μCT values for N.Slabs (41: r(2) = 0.93, p < 0.001; 82: r(2) = 0.84, p < 0.001), N.Tubes (41: r(2) = 0.94, p < 0.001; 82: r(2) = 0.84, p < 0.001), and N.Junctions (41: r(2) = 0.93, p < 0.001; 82: r(2) = 0.78, p < 0.001), though proportional bias was evident in these correlations. Weak correlations were seen for iSlab.Vol/iTube.Vol at both voxel sizes (41: r(2) = 0.52, p < 0.01; 82: r(2) = 0.39, p < 0.05). Slab.Vol was significantly correlated to μCT data at 41 μm (r(2) = 0.60, p < 0.01) but not at 82 μm, while Tube.Vol was significantly correlated at both voxel sizes (41: r(2) = 0.79, p < 0.001; 82: r(2) = 0.68, p < 0.01). In vivo precision error for these parameters ranged from 2.31 to 9.68 RMSCV%.Strong correlations between μCT- and HR-pQCT-derived measurements were found, particularly in HR-pQCT images obtained at 41 μm. These data are in agreement with our previous study investigating the effect of voxel size on standard HR-pQCT metrics of trabecular and cortical microstructure, and extend our previous findings to include topological descriptors of the cortical pore network.
| S-EPMC3895089 | biostudies-other
Project description:Osteoporosis is typically diagnosed by dual-energy X-ray absorptiometry (DXA) measurements of areal bone mineral density (aBMD). Emerging technologies, such as high-resolution peripheral quantitative computed tomography (HR-pQCT), may increase the diagnostic accuracy of DXA and enhance our mechanistic understanding of decreased bone strength in osteoporosis. Women with (n = 68) and without (n = 101) a history of postmenopausal fragility fracture had aBMD measured by DXA, trabecular plate and rod microarchitecture measured by HR-pQCT image-based individual trabecula segmentation (ITS) analysis, and whole bone and trabecular bone stiffness by microfinite element analysis (µFEA) of HR-pQCT images at the radius and tibia. DXA T-scores were similar in women with and without fractures at the spine, hip, and 1/3 radius, but lower in fracture subjects at the ultradistal radius. Trabecular microarchitecture of fracture subjects was characterized by preferential reductions in trabecular plate bone volume, number, and connectivity over rod trabecular parameters, loss of axially aligned trabeculae, and a more rod-like trabecular network. In addition, decreased thickness and size of trabecular plates were observed at the tibia. The differences between groups were greater at the radius than the tibia for plate number, rod bone volume fraction and number, and plate-rod and rod-rod junction densities. Most differences between groups remained after adjustment for T-score by DXA. At a fixed bone volume fraction, trabecular plate volume, number, and connectivity were directly associated with bone stiffness. In contrast, rod volume, number, and connectivity were inversely associated with bone stiffness. In summary, HR-pQCT-based ITS and µFEA measurements discriminate fracture status in postmenopausal women independent of DXA measurements. Moreover, these results suggest that preferential loss of plate-like trabeculae contribute to lower trabecular bone and whole bone stiffness in women with fractures. We conclude that HR-pQCT-based ITS and µFEA measurements increase our understanding of the microstructural pathogenesis of fragility fracture in postmenopausal women.
| S-EPMC3290758 | biostudies-literature
Project description:Anorexia nervosa (AN) is associated with decreased bone mineral density and increased risk of fracture. The aim of this study was to assess bone geometry, volumetric bone mineral density (vBMD), trabecular microarchitecture and estimated failure load in weight-bearing vs. non-weight-bearing bones in AN. We included twenty-five females with AN, and twenty-five female controls matched on age and height. Bone geometry, vBMD and trabecular microarchitecture were assessed using high-resolution peripheral quantitative computed tomography of the distal radius and tibia. At both sites, cortical perimeter and total bone area were similar in patients and controls. Total vBMD was lower in the AN group in the tibia (p < 0.0005) but not in the radius. In the tibia, cortical thickness was approximately 25% lower (p < 0.0005) in the AN group, whereas there was no significant difference in the radius. In terms of trabecular microarchitecture, all indices [bone volume/tissue volume (BV/TV); trabecular thickness (Tb.Th.), trabecular number (Tb.N) and trabecular spacing (Tb.Sp.)] were impaired in AN in the tibia (p values range < 0.01-0.0001). In the radius, BV/TV and Tb.N were lower (p < 0.05 and p < 0.001, respectively); Tb.Sp. was higher (p < 0.001), whereas Tb.Th. did not differ, compared to controls. Estimated failure load was lower in patients in both the radius and the tibia (p < 0.0005 and p < 0.0001, respectively), most pronounced in the tibia. In conclusion, the impairment of cortical thickness and estimated failure load were significantly more pronounced in the weight-bearing tibia, compared to the non-weight-bearing radius, implying a direct effect of low body weight on bone loss in AN.
| S-EPMC5486942 | biostudies-literature
Project description:There is an increasing interest in understanding teleost bone biomechanics in several scientific communities, for instance as interesting biomaterials with specific structure-function relationships. Intermuscular bones of teleost fish have previously been described to play a role in the mechanical force transmission between muscle and bone, but their biomechanical properties are not yet fully described. Here, we have investigated intermuscular bones (IBs) of the North Atlantic Herring with regard to their structure and micro-architecture, mineral-related properties, and micro-mechanical tensile properties. A total of 115 IBs from 18 fish were investigated. One cohort of IBs, containing 20 bones from 2 smaller fish and 23 bones of 3 larger fish, was used for mechanical testing, wide-angle X-ray scattering, and scanning electron microscopy. Another cohort, containing 36 bones from 7 smaller fish and 36 bones from 6 larger fish, was used for microCT. Results show some astonishing properties of the IBs: (i) IBs present higher ductility, lower Young's modulus but similar strength and TMD (Tissue Mineral Density) compared to mammalian bone, and (ii) IBs from small fish were 49% higher in Young's modulus than fish bones from larger fish while their TMD was not statistically different and crystal length was 8% higher in large fish bones. Our results revealed that teleost IB presents a hybrid nature of soft and hard tissue that differs from other bone types, which might be associated with their evolution from mineralized tendons. This study provides new data regarding teleost fish bone biomechanical and micro-structural properties.
| S-EPMC6995032 | biostudies-literature
Project description:Osteoporosis is a systemic skeletal disease characterized by low bone mass and bone structural deterioration that may result in fragility fractures. Use of bone imaging modalities to accurately predict fragility fractures is always an important issue, yet the current gold standard of dual-energy X-ray absorptiometry (DXA) for diagnosis of osteoporosis cannot fully satisfy this purpose. The latest high-resolution peripheral quantitative computed tomography (HR-pQCT) is a three-dimensional (3D) imaging device to measure not only volumetric bone density, but also the bone microarchitecture in a noninvasive manner that may provide a better fracture prediction power. This systematic review and meta-analysis was designed to investigate which HR-pQCT parameters at the distal radius and/or distal tibia could best predict fragility fractures. A systematic literature search was conducted in Embase, PubMed, and Web of Science with relevant keywords by two independent reviewers. Original clinical studies using HR-pQCT to predict fragility fractures with available full text in English were included. Information was extracted from the included studies for further review. In total, 25 articles were included for the systematic review, and 16 articles for meta-analysis. HR-pQCT was shown to significantly predict incident fractures and/or major osteoporotic fractures (MOFs). Of all the HR-pQCT parameters, our meta-analysis revealed that cortical volumetric bone mineral density (Ct.vBMD), trabecular thickness (Tb.Th), and stiffness were better predictors. Meanwhile, HR-pQCT parameters indicated better performance in predicting MOFs than incident fractures. Between the two standard measurement sites of HR-pQCT, the non-weight-bearing distal radius was a more preferable site than distal tibia for fracture prediction. Furthermore, most of the included studies were white-based, whereas very few studies were from Asia or South America. These regions should build up their densitometric databases and conduct related prediction studies. It is expected that HR-pQCT can be used widely for the diagnosis of osteoporosis and prediction of future fragility fractures. © 2021 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).
| S-EPMC9298023 | biostudies-literature
Project description:Older adults with type 2 diabetes (T2D) tend to have normal or greater areal bone mineral density (aBMD), as measured by DXA, than those who do not have diabetes (non-T2D). Yet risk of fracture is higher in T2D, including 40% to 50% increased hip fracture risk. We used HR-pQCT to investigate structural mechanisms underlying skeletal fragility in T2D. We compared cortical and trabecular bone microarchitecture, density, bone area, and strength in T2D and non-T2D. In secondary analyses we evaluated whether associations between T2D and bone measures differed according to prior fracture, sex, and obesity. Participants included 1069 members of the Framingham Study, who attended examinations in 2005 to 2008 and underwent HR-pQCT scanning in 2012 to 2015. Mean age was 64 ± 8 years (range, 40 to 87 years), and 12% (n = 129) had T2D. After adjustment for age, sex, weight, and height, T2D had lower cortical volumetric BMD (vBMD) (p < 0.01), higher cortical porosity (p = 0.02), and smaller cross-sectional area (p = 0.04) at the tibia, but not radius. Trabecular indices were similar or more favorable in T2D than non-T2D. Associations between T2D and bone measures did not differ according to sex or obesity status (all interaction p > 0.05); however, associations did differ in those with a prior fracture and those with no history of fracture. Specifically, cortical vBMD at the tibia and cortical thickness at the radius were lower in T2D than non-T2D, but only among those individuals with a prior fracture. Cortical porosity at the radius was higher in T2D than non-T2D, but only among those who did not have a prior fracture. Findings from this large, community-based study of older adults suggest that modest deterioration in cortical bone and reductions in bone area may characterize diabetic bone disease in older adults. Evaluation of these deficits as predictors of fracture in T2D is needed to develop prevention strategies in this rapidly increasing population of older adults. © 2017 American Society for Bone and Mineral Research.
| S-EPMC5771832 | biostudies-literature
Project description:Background contextAbnormalities in intervertebral rotation and translation are important to diagnosis and treatment planning for common spinal disorders. Tests that do not sufficiently load the spine can result in mis-diagnosed motion abnormalities. Upright flexion and extension x-rays are commonly used despite known limitations. Additional evidence is needed in support of preliminary studies suggesting that the change from standing to supine may sufficiently stress the spine to diagnose motion abnormalities.PurposeCompare intervertebral translation between flexion and extension to translation between upright and supine positions in a representative clinical population.Study design/settingProspective analysis of images retrospectively collected from routine clinical practices.MethodsAfter obtaining IRB approval for analysis of previously obtained images, patients were identified via chart reviews where a neutral-lateral x-ray and an MRI or CT exam were obtained for diagnosis of a spinal disorder and where flexion-extension x-rays had been obtained to help diagnose abnormal intervertebral motion. The mid-sagittal slice from the MRI or CT exam was paired with the neutral-lateral radiograph. Intervertebral translation at the L4-L5 and L5-S1 levels between supine and standing and between flexion and extension were measured from the images using previously validated methods. The translations were classified as normal or abnormal with reference to a previously obtained database of intervertebral motion in radiographically normal and asymptomatic volunteers.ResultsAt the L5-S1 level in particular, there tended to be greater translation between the supine and standing than between upright flexion and extension. On average, translations were below that found in asymptomatic volunteers. No abnormal translations were detected from flexion-extension radiographs whereas approximately 7% of levels had abnormal translations between supine and upright positions.ConclusionsIntervertebral translations between supine and standing, measured using the mid-sagittal slice from a MRI or CT exam and a lateral x-ray with the patient standing can help to identify abnormal motion. This would be particularly valuable for patients with limited flexion and extension. This study thereby adds to the evidence in support of measuring intervertebral motion between the supine and upright positions to detect abnormal intervertebral motion.
| S-EPMC8819970 | biostudies-literature