Nickel-Catcher-Doped Zwitterionic Hydrogel Coating on Nickel-Titanium Alloy Toward Capture and Detection of Nickel Ions.
Ontology highlight
ABSTRACT:
SUBMITTER: Fu X
PROVIDER: S-EPMC8264594 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Zwitterionic hydrogels exhibit eminent nonfouling and hemocompatibility. Several key challenges hinder their application as coating materials for blood-contacting biomedical devices, including weak mechanical strength and low adhesion to the substrate. Here, we report a poly(carboxybetaine) microgel reinforced poly(sulfobetaine) (pCBM/pSB) pure zwitterionic hydrogel with excellent mechanical robustness and anti-swelling properties. The pCBM/pSB hydrogel coating was bonded to the PVC substrate via the entanglement network between the pSB and PVC chain. Moreover, the pCBM/pSB hydrogel coating can maintain favorable stability even after 21 d PBS shearing, 0.5 h strong water flushing, 1000 underwater bends, and 100 sandpaper abrasions. Notably, the pCBM/pSB hydrogel coated PVC tubing can not only mitigate the foreign body response but also prevent thrombus formation ex vivo in rats and rabbits blood circulation without anticoagulants. This work provides new insights to guide the design of pure zwitterionic hydrogel coatings for biomedical devices.
| S-EPMC9468150 | biostudies-literature
Project description:Surface treatment and bioactive metal ion incorporation are effective methods for the modification of titanium alloys to be used as biomaterials. However, few studies have demonstrated the use of air-plasma treatment in orthopedic biomaterial development. Additionally, no study has performed a direct comparison between unmodified titanium alloys and air-plasma-treated alloys with respect to their biocompatibility and osteogenesis. In this study, the biological activities of unmodified titanium alloys, air-plasma-treated titanium alloys, and air-plasma-treated strontium-doped/undoped calcium phosphate (CaP) coatings were compared. The strontium-doped CaP (Sr-CaP) coating on titanium alloys were produced by selective laser melting (SLM) technology as well as micro-arc oxidation (MAO) and air-plasma treatment. The results revealed that rapid air-plasma treatment improved the biocompatibility of titanium alloys and that Sr-CaP coating together with air-plasma treatment significantly enhanced both the biocompatibility and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). Overall, this study demonstrated that low temperature air-plasma treatment is a fast and effective surface modification which improves the biocompatibility of titanium alloys. Additionally, air-plasma-treated Sr-CaP coatings have numerous practical applications and may provide researchers with new tools to assist in the development of orthopedic implants.
| S-EPMC7235326 | biostudies-literature
Project description:In this study, the bottleneck challenge of membrane fouling is addressed via establishing a scalable concentration polarization (CP) enabled and surface-selective hydrogel coating using zwitterionic cross-linkable macromolecules as building blocks. First, a novel methacrylate-based copolymer with sulfobetain and methacrylate side groups was prepared in a simple three-step synthesis. Polymer gelation initiated by a redox initiator system (ammonium persulfate and tetramethylethylenediamine) for radical cross-linking was studied in bulk in order to identify minimum ("critical") concentrations to obtain a hydrogel. In situ reactive coating of a polyamide nanofiltration membrane was achieved via filtration of a mixture of the reactive compounds, utilizing CP to meet critical gelation conditions solely within the boundary layer. Because the feasibility was studied and demonstrated in dead-end filtration mode, the variable extent of CP was estimated in the frame of the film model, with an iterative calculation using experimental data as input. This allowed to discuss the influence of parameters such as solution composition or filtration rate on the actual polymer concentration and resulting hydrogel formation at the membrane surface. The zwitterionic hydrogel-coated membranes exhibited lower surface charge and higher flux during protein filtration, both compared to pristine membranes. Salt rejection was found to remain unchanged. Results further reveal that the hydrogel coating thickness and consequently the reduction in membrane permeance due to the coating can be tuned by variation of filtration time and polymer feed concentration, illustrating the novel modification method's promising potential for scale-up to real applications.
| S-EPMC7999987 | biostudies-literature
Project description:Blood-contacting devices must be designed to minimize the risk of bloodstream-associated infections, thrombosis, and intimal lesions caused by surface friction. However, achieving effective prevention of both bloodstream-associated infections and thrombosis poses a challenge due to the conflicting nature of antibacterial and antithrombotic activities, specifically regarding electrostatic interactions. This study introduced a novel biocompatible hydrogel of sodium alginate and zwitterionic carboxymethyl chitosan (ZW@CMC) with antibacterial and antithrombotic activities for use in catheters. The ZW@CMC hydrogel demonstrates a superhydrophilic surface and good hygroscopic properties, which facilitate the formation of a stable hydration layer with low friction. The zwitterionic-functionalized CMC incorporates an additional negative sulfone group and increased negative charge density in the carboxyl group. This augmentation enhances electrostatic repulsion and facilitates the formation of hydration layer. This leads to exceptional prevention of blood clotting factor adhesion and inhibition of biofilm formation. Subsequently, the ZW@CMC hydrogel exhibited biocompatibility with tests of in vitro cytotoxicity, hemolysis, and catheter friction. Furthermore, in vivo tests of antithrombotic and systemic inflammation models with catheterization indicated that ZW@CMC has significant advantages for practical applications in cardiovascular-related and sepsis treatment. This study opens a new avenue for the development of chitosan-based multifunctional hydrogel for applications in blood-contacting devices.
| S-EPMC10777421 | biostudies-literature
Project description:With the aging of the population in worldwide, valvular heart disease has become one of the most prominent life-threatening diseases in human health, and heart valve replacement surgery is one of the therapeutic methods for valvular heart disease. Currently, commercial bioprosthetic heart valves (BHVs) for clinical application are prepared with xenograft heart valves or pericardium crosslinked by glutaraldehyde. Due to the residual cell toxicity from glutaraldehyde, heterologous antigens, and immune response, there are still some drawbacks related to the limited lifespan of bioprosthetic heart valves, such as thrombosis, calcification, degeneration, and defectiveness of re-endothelialization. Therefore, the problems of calcification, defectiveness of re-endothelialization, and poor biocompatibility from the use of bioprosthetic heart valve need to be solved. In this study, hydrogel hybrid heart valves with improved anti-calcification and re-endothelialization were prepared by taking decellularized porcine heart valves as scaffolds following grafting with double bonds. Then, the anti-biofouling zwitterionic monomers 2-methacryloyloxyethyl phosphorylcholine (MPC) and vascular endothelial growth factor (VEGF) were utilized to obtain a hydrogel-coated hybrid heart valve (PEGDA-MPC-DHVs@VEGF). The results showed that fewer platelets and thrombi were observed on the surface of the PEGDA-MPC-DHVs@VEGF. Additionally, the PEGDA-MPC-DHVs@VEGF exhibited excellent collagen stability, biocompatibility and re-endothelialization potential. Moreover, less calcification deposition and a lower immune response were observed in the PEGDA-MPC-DHVs@VEGF compared to the glutaraldehyde-crosslinked DHVs (Glu-DHVs) after subcutaneous implantation in rats for 30 days. These studies demonstrated that the strategy of zwitterionic hydrogels loaded with VEGF may be an effective approach to improving the biocompatibility, anti-calcification and re-endothelialization of bioprosthetic heart valves. Graphical abstract Hybrid heart valves with VEGF-loaded zwitterionic hydrogel coating exhibit good hemocompatibility, decrease calcium deposition and promote adhesion of endothelial cells. Thus, strategy of coating with zwitterionic hydrogel and loaded VEGF may be an effective and potential approach to improve biocompatibility, anti-calcification and re-endothelialization of bioprosthetic heart valves.Image 1 Highlights • A new and promising strategy of overcoming defects of bioprosthetic heart valves.• The zwitterionic hydrogel with VEGF is utilized to improve anti-calcification and re-endothelialization properties of heart valves.• The hybrid heart valves with a VEGF-loaded zwitterionic hydrogel coating exhibits excellent biocompatibility.
| S-EPMC9583583 | biostudies-literature
Project description:Dispersed silver nanoparticles (AgNPs) on the surface of titanium alloy (Ti6Al4V) and titanium alloy modified by titania nanotube layer (Ti6Al4V/TNT) substrates were produced by the chemical vapor deposition method (CVD) using a novel precursor of the formula [Ag?(O?CC?F?)?(H?O)?]. The structure and volatile properties of this compound were determined using single crystal X-ray diffractometry, variable temperature IR spectrophotometry (VT IR), and electron inducted mass spectrometry (EI MS). The morphology and the structure of the produced Ti6Al4V/AgNPs and Ti6Al4V/TNT/AgNPs composites were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Moreover, measurements of hardness, Young's modulus, adhesion, wettability, and surface free energy have been carried out. The ability to release silver ions from the surface of produced nanocomposite materials immersed in phosphate-buffered saline (PBS) solution has been estimated using inductively coupled plasma mass spectrometry (ICP-MS). The results of our studies proved the usefulness of the CVD method to enrich of the Ti6Al4V/TNT system with silver nanoparticles. Among the studied surface-modified titanium alloy implants, the better nano-mechanical properties were noticed for the Ti6Al4V/TNT/AgNPs composite in comparison to systems non-enriched by AgNPs. The location of silver nanoparticles inside of titania nanotubes caused their lowest release rate, which may indicate suitable properties on the above-mentioned type of the composite for the construction of implants with a long term antimicrobial activity.
| S-EPMC6321524 | biostudies-literature
Project description:Presence of biofilms in drinking water distribution systems (DWDS) can be a nuisance, leading to several operational and maintenance issues (i.e., increased secondary disinfectants demand, pipe damage or increased flow resistance), and so far, no single control practice was found to be sufficiently effective. Here, we propose poly (sulfobetaine methacrylate) (P(SBMA))-based hydrogel coating application as a biofilm control strategy in DWDS. The P(SBMA) coating was synthetized through photoinitiated free radical polymerization on polydimethylsiloxane with different combinations of SBMA as a monomer, and N, N'-methylenebis (acrylamide) (BIS) as a cross-linker. The most stable coating in terms of its mechanical properties was obtained using 20% SBMA with a 20:1 SBMA:BIS ratio. The coating was characterized using Scanning Electron Microscopy, Energy Dispersive X-Ray Spectroscopy, and water contact angle measurements. The anti-adhesive performance of the coating was evaluated in a parallel-plate flow chamber system against adhesion of four bacterial strains representing genera commonly identified in DWDS biofilm communities, Sphingomonas and Pseudomonas. The selected strains exhibited varying adhesion behaviors in terms of attachment density and bacteria distribution on the surface. Despite these differences, after 4 h, presence of the P(SBMA)-based hydrogel coating significantly reduced the number of adhering bacteria by 97%, 94%, 98% and 99%, for Sphingomonas Sph5, Sphingomonas Sph10, Pseudomonas extremorientalis and Pseudomonas aeruginosa, respectively, compared to non-coated surfaces. These findings motivate further research into a potential application of a hydrogel anti-adhesive coating as a localized biofilm control strategy in DWDS, especially on materials known to promote excessive biofilm growth.
| S-EPMC9989184 | biostudies-literature
Project description:With the rapid development of perovskite solar cells (PSCs), lowering fabrication costs for PSCs has become a prominent challenge for commercialization. At present, gold is commonly used as the back metal electrode in state-of-the-art n-i-p structured PSCs due to its compatible work function, chemical inertness, and high conductivity. However, the high cost of gold and the expensive and time-consuming vacuum-based thin-film coating facilities may impede large-scale industrialization of PSCs. Here, we report a bilayer back electrode configuration consisting of an Ni-doped natural graphite layer with a fusible Bi-In alloy. This back electrode can be deposited in a vacuum-free approach and enables PSCs with a power conversion efficiency of 21.0%. These inexpensive materials and facile ambient fabrication techniques provide an appealing disruptive solution to low-cost PSC industrialization.
| S-EPMC10353479 | biostudies-literature
Project description:In this paper, Nb-doped BaTiO3 nanoparticles (BaNb0.47Ti0.53O3) were prepared using an electrochemical method in an alkaline solution, with titanium-niobium alloy as the electrode. The results indicated that under relatively mild conditions (normal temperature and pressure, V < 60 V, I < 5 A), cubic perovskite phase Nb-doped BaTiO3 nanoparticles with high crystallinity and uniform distribution can be synthesized. With this increase in alkalinity, the crystallinity of the sample increases, the crystal grain size decreases, and the particles become more equally dispersed. Furthermore, in our study, the average grain size of the nanoparticles was 5-20 nm, and the particles with good crystallinity were obtained at a concentration of 3 mol/L of NaOH. This provides a new idea and method for introducing foreign ions under high alkalinity conditions.
| S-EPMC9862403 | biostudies-literature
Project description:To enhance bacterial resistance and osteogenesis of titanium (Ti) -based implants, TiO2/calcium-phosphate coatings (TiCP) doped with various amounts of fluorine (F) (designated as TiCP-F1, TiCP-F6, and TiCP-F9) were prepared on Ti by micro-arc oxidation. The F doped TiCP coatings possess a microporous structure (pore size of 3-4 ?m in average diameter) which is evenly covered by nano-grains of 30-60?nm in size. Successful F incorporation into TiCP was determined by X-ray photoelectron spectroscopy, and it shows weak influence on the microstructure, phase compositions, surface roughness and wettability of TiCP. All the coatings bonded firmly to the Ti substrates and showed enduring high adhesion strength in biological circumstances. The bacterial resistance and osteogenesis of the coatings were evaluated by implanting testing materials in vitro and in an infected rabbit model caused by bacteria. Both the in vitro and in vivo results indicated that TiCP and TiCP-F1 were of much higher osteogenic activity compared with Ti but lacking of bacterial resistance, whereas TiCP with high F addition (TiCP-F6 and TiCP-F9) exhibited both dramatically improved bacterial resistance and osteogenesis. In summary, TiCP-F6 possessed the best antibacterial and osteogenic activities, especially exhibited excellent osseointegration efficacy in the infected rabbit model.
| S-EPMC6294799 | biostudies-other