Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

DFT Study of Methylene Blue Adsorption on ZnTiO₃ and TiO₂ Surfaces (101).

ABSTRACT: The search for alternative materials with high dye adsorption capacity, such as methylene blue (MB), remains the focus of current studies. This computational study focuses on oxides ZnTiO₃ and TiO₂ (anatase phase) and on their adsorptive properties. Computational calculations based on DFT methods were performed using the Viena Ab initio Simulation Package (VASP) code to study the electronic properties of these oxides. The bandgap energy values calculated by the Hubbard U (GGA + U) method for ZnTiO₃ and TiO₂ were 3.17 and 3.21 eV, respectively, which are consistent with the experimental data. The most favorable orientation of the MB adsorbed on the surface (101) of both oxides is semi-perpendicular. Stronger adsorption was observed on the ZnTiO₃ surface (-282.05 kJ/mol) than on TiO₂ (-10.95 kJ/mol). Anchoring of the MB molecule on both surfaces was carried out by means of two protons in a bidentate chelating (BC) adsorption model. The high adsorption energy of the MB dye on the ZnTiO₃ surface shows the potential value of using this mixed oxide as a dye adsorbent for several technological and environmental applications.

SUBMITTER: Jaramillo-Fierro X

PROVIDER: S-EPMC8270277 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

La<sup>3+</sup>'s Effect on the Surface (101) of Anatase for Methylene Blue Dye Removal, a DFT Study.

Project description:Density functional theory (DFT) is a widely used method for studying matter at the quantum level. In this study, the surface (101) of TiO2 (anatase phase) was considered to develop DFT calculations and explain the effect of lanthanum ion (La3+) on the electronic properties, adsorption capacity, and photocatalytic activity of this semiconductor. Due to the presence of the La3+ ion, the bandgap energy value of La/TiO2 (2.98 eV) was lower than that obtained for TiO2 (3.21 eV). TDOS analysis demonstrated the presence of hybrid levels in La/TiO2 composed mainly of O2p and La5d orbitals. The chemical nature of the La-O bond was estimated from PDOS analysis, Bader charge analysis, and ELF function, resulting in a polar covalent type, due to the combination of covalent and ionic bonds. In general, the adsorption of the methylene blue (MB) molecule on the surface (101) of La/TiO2 was energetically more favorable than on the surface (101) of TiO2. The thermodynamic stability of doping TiO2 with lanthanum was deduced from the negative heat-segmentation values obtained. The evidence from this theoretical study supports the experimental results reported in the literature and suggests that the semiconductor La/TiO2 is a potential catalyst for applications that require sunlight.

| S-EPMC9571724 | biostudies-literature

Functionalized Attapulgite for the Adsorption of Methylene Blue: Synthesis, Characterization, and Adsorption Mechanism.

Project description:Attapulgite (denoted as APT, also called palygorskite) has been regarded as the green material in the "21st century world" and has attracted widespread attention due to its advantages of low cost, natural abundance, nontoxic nature, and environmental friendliness. However, the limited adsorption sites and surface charges of natural APT greatly hinder its application as an adsorbent in industrial fields. In this work, natural APT was modified with sodium humate (SA) via a facile one-step hydrothermal process to improve its adsorption capacity and systematically studied its ability to remove methylene blue (MB) from aqueous solutions. The effect of hydrothermal modification in the presence of SA on the microscopic structure, morphology, and physicochemical properties of APT was studied by field-emission scanning electron microscopy, Fourier transform infrared spectrometry, X-ray diffraction, and Brunauer-Emmett-Teller analyses. The adsorption properties of the modified APT toward MB were evaluated systematically. The results demonstrated that the modified APT has a high adsorption capacity of 227.27 mg/g and also shows a high removal rate up to 99.7% toward MB in a dye solution with an initial concentration of 150 mg/L, which was a 64.7% increase as compared to that of raw APT. The adsorption kinetics could be fitted to the pseudo-second-order model, while the adsorption isotherm could be well-described with the Langmuir model. It was concluded that electrostatic attraction, hydrogen-bonding interaction, and chemical association are the main driving force during the adsorption process.

| S-EPMC8340108 | biostudies-literature

Coupling Adsorption-Photocatalytic Degradation of Methylene Blue and Maxilon Red.

Project description:The MB and MR removal process by two mechanisms of adsorption using rice straw (absence of UV light) and photodegradation on TiO2 surfaces was investigated. MB and MR removal efficiency were further intensified upon the sequential operation of adsorption followed by photocatalytic degradation over TiO2 under visible light irradiation. The TiO2 was used to remove methylene blue (MB) and Maxilon Red (MR) dye from aqueous media by continuous mode at 25 ± 2 °C, at pH 6.8 ± 0.2. Photo-illumination study revealed 75.81 and 65.51% MB and MR removal with the dose of 1 g/L TiO2 with an initial concentration of 5 mg/L within 120 min. This study can be deemed of potential applications for the removal of MB and MR dyes on an industrial level using the synergistic adsorption-photocatalytic oxidation approach. A probable photodegradation mechanism was proposed.

| S-EPMC9270313 | biostudies-literature

Prediction of Methylene Blue Removal by Nano TiO2 Using Deep Neural Network.

Project description:This paper deals with the prediction of methylene blue (MB) dye removal under the influence of titanium dioxide nanoparticles (TiO2 NPs) through deep neural network (DNN). In the first step, TiO2 NPs were prepared and their morphological properties were analysed by scanning electron microscopy. Later, the influence of as synthesized TiO2 NPs was tested against MB dye removal and in the final step, DNN was used for the prediction. DNN is an efficient machine learning tools and widely used model for the prediction of highly complex problems. However, it has never been used for the prediction of MB dye removal. Therefore, this paper investigates the prediction accuracy of MB dye removal under the influence of TiO2 NPs using DNN. Furthermore, the proposed DNN model was used to map out the complex input-output conditions for the prediction of optimal results. The amount of chemicals, i.e., amount of TiO2 NPs, amount of ehylene glycol and reaction time were chosen as input variables and MB dye removal percentage was evaluated as a response. DNN model provides significantly high performance accuracy for the prediction of MB dye removal and can be used as a powerful tool for the prediction of other functional properties of nanocomposites.

| S-EPMC8473325 | biostudies-literature

The Adsorption of Methylene Blue on Eco-Friendly Reduced Graphene Oxide.

Project description:Recently, green-prepared oxidized graphenes have attracted huge interest in water purification and wastewater treatment. Herein, reduced graphene oxide (rGO) was prepared by a scalable and eco-friendly method, and its potential use for the removal of methylene blue (MB) from water systems, was explored. The present work includes the green protocol to produce rGO and respective spectroscopical and morphological characterizations, as well as several kinetics, isotherms, and thermodynamic analyses to successfully demonstrate the adsorption of MB. The pseudo-second-order model was appropriated to describe the adsorption kinetics of MB onto rGO, suggesting an equilibrium time of 30 min. Otherwise, the Langmuir model was more suitable to describe the adsorption isotherms, indicating a maximum adsorption capacity of 121.95 mg g-1 at 298 K. In addition, kinetics and thermodynamic analyses demonstrated that the adsorption of MB onto rGO can be treated as a mixed physisorption-chemisorption process described by H-bonding, electrostatic, and ? - ? interactions. These results show the potential of green-prepared rGO to remove cationic dyes from wastewater systems.

| S-EPMC7221676 | biostudies-literature

Solar Light-Induced Methylene Blue Removal over TiO2/AC Composites and Photocatalytic Regeneration.

Project description:TiO2-containing photocatalysts, which combine TiO2 with carbon-based materials, are promising materials for wastewater treatment due to synergistic photodegradation and adsorption phenomena. In this work, TiO2/AC composites were produced by the in situ immobilization of TiO2 nanoparticles over activated carbon (AC) derived from spent coffee grains, using different TiO2/AC proportions. The TiO2/AC composites were tested as adsorbents (dark) and as photocatalysts in a combined adsorption+photocatalytic process (solar irradiation) for methylene blue (MB) removal from ultrapure water, and from a secondary effluent (SecEf) of an urban wastewater treatment plant. All the materials were characterized by XRD (X-ray powder diffraction), N2 adsorption-desorption isotherms at -196 °C, SEM (scanning electron microscopy), UV-Vis diffuse reflectance, FTIR (Fourier-transform infrared spectroscopy), TPD (temperature programmed desorption), XPS (X-ray photoelectron spectroscopy) and TGA (thermogravimetric analysis). The TiAC60 (60% C) composite presented the lowest band gap (1.84 eV), while, for TiAC29 (29% C), the value was close to that of bare TiO2 (3.18 vs. 3.17 eV). Regardless of the material, the solar irradiation improved the percentage of MB discolouration when compared to adsorption in dark conditions. In the case of simultaneous adsorption+photocatalytic assays performed in ultrapure water, TiAC29 presented the fastest MB removal. Nevertheless, both TiAC29 and TiAC60 led to excellent MB removal percentages (96.1-98.1%). UV-induced photoregeneration was a promising strategy to recover the adsorption capacity of the materials, especially for TiAC60 and AC (>95%). When the assays were performed in SecEf, all the materials promoted discolouration percentages close to those obtained in ultrapure water. The bulk water parameters revealed that TiAC60 allowed the removal of a higher amount of MB, associated with the overall improvement of the SecEf quality.

| S-EPMC8625254 | biostudies-literature

Scenarios of polaron-involved molecular adsorption on reduced TiO2(110) surfaces.

Project description:The polaron introduced by the oxygen vacancy (Vo) dominates many surface adsorption processes and chemical reactions on reduced oxide surfaces. Based on IR spectra and DFT calculations of NO and CO adsorption, we gave two scenarios of polaron-involved molecular adsorption on reduced TiO2(110) surfaces. For NO adsorption, the subsurface polaron electron transfers to a Ti:3d-NO:2p hybrid orbital mainly on NO, leading to the large redshifts of vibration frequencies of NO. For CO adsorption, the polaron only transfers to a Ti:3d state of the surface Ti5c cation underneath CO, and thus only a weak shift of vibration frequency of CO was observed. These scenarios are determined by the energy-level matching between the polaron state and the LUMO of adsorbed molecules, which plays a crucial role in polaron-adsorbate interaction and related catalytic reactions on reduced oxide surfaces.

| S-EPMC5522416 | biostudies-literature

Ag/AgCl/MIL-101(Fe) Catalyzed Degradation of Methylene Blue under Visible Light Irradation.

Project description:A novel photo-Fenton catalyst named Ag/AgCl/MIL-101(Fe) was synthesized by the method of precipitation and photo reduction and characterized by X-ray diffraction patterns (XRD), Brunauer-Emmett-Teller (BET) measurements, Fourier transform infrared spectra (FTIR), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectra. Moreover, the catalytic activity of the synthesized catalyst was tested using methylene blue (MB) as the target pollutant. The obtained results illustrated that the plasmonic material Ag/AgCl was successfully loaded on MIL-101(Fe) and the obtained catalyst exhibited an excellent catalytic activity under visible light at the neutral pH. According to the analyses of Plackett-Burman and Box-Behnken design, the optimum conditions for MB degradation were obtained. Under these conditions, the MB decolorization and mineralization efficiencies could reach to 99.75% and 65.43%, respectively. The recycling experiments also showed that the as-prepared catalyst displayed good reusability. In addition, the possible reaction mechanisms for the heterogeneous photo-Fenton system catalyzed by Ag/AgCl/MIL-101(Fe) were derived. The synthesized catalyst provides a promising approach to degrade organic pollutants in waste water.

| S-EPMC6540000 | biostudies-literature

Citrus Pectin-Derived Carbon Microspheres with Superior Adsorption Ability for Methylene Blue.

Project description:In this study, citrus pectin-derived, green, and tunable carbon microspheres with superior adsorption capacity and high adsorption rate, as well as good reusability toward methylene blue adsorption, were prepared by a facile hydrothermal method without any hazardous chemicals. The materials hold great potential for the treatment of methylene blue wastewater.

| S-EPMC5535227 | biostudies-literature

Fabrication and Adsorption Behavior of Magnesium Silicate Hydrate Nanoparticles towards Methylene Blue.

Project description:Magnesium silicate as a high-performance adsorption material has attracted increasing attention for the removal of organic dye pollution. Here, we prepared a series of magnesium silicate hydrates (MSH) in a hydrothermal route, and carefully investigated the corresponding adsorption behavior towards methylene blue (MB) as well as the effect of surface charge on adsorption capacity. The results show that surface charge plays a key role in the adsorption performance of MSH for MB, a negative surface charge density follows the increase of Si/Mg feeding ratio from 1.00 to 1.75, and furthermore the higher negative charge favors the improvement of the adsorption capacity. Among four investigated samples (MSH = 1.00, 1.25, 1.50, and 1.75), MSH-1.75 has the highest negative surface charge and shows the largest adsorption capacity for MB. For example, the equilibrium adsorption quantity is 307 mg·g−1 for MSH-1.75, which is 35% higher than that of 227 mg·g−1 for MSH-1.00. Besides, for MSH-1.75, the as-prepared sample with negative charge exhibits ca. 36% higher adsorption quantity compared to the sample at the zero point of charge (pHZPC). Furthermore, magnesium silicate hydrate material with Si/Mg feeding ratio = 1.75 demonstrates the promising removal efficiency of beyond 98% for methylene blue in 10 min, and the maximum adsorption capacity of 374 mg·g−1 calculated from the Langmuir isotherm model.

| S-EPMC5977285 | biostudies-literature