Gaseous Elemental Mercury (GEM) in the Mexico City Metropolitan Area.
Ontology highlight
ABSTRACT:
SUBMITTER: Morton-Bermea O
PROVIDER: S-EPMC8271313 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Emissions of gaseous elemental mercury (GEM or Hg0) from different sources in urban areas are important subjects for environmental investigations. In this study, atmospheric Hg measurements were conducted to investigate air pollution in the urban environment by carrying out several mobile surveys in Mexico City. This work presents atmospheric concentrations of GEM in terms of diurnal variation trends and comparisons with criteria for pollutant concentrations such as CO, SO2, NO2, PM2.5, and PM10. The concentration of GEM was measured during the pre-rainy period by using a high-resolution active air sampler, the Lumex RA 915 M mercury analyzer. In comparison with those for other cities worldwide, the GEM concentrations were similar or slightly elevated, and they ranged from 0.20 to 30.23 ng m-3. However, the GEM concentration was significantly lower than those in contaminated areas, such as fluorescent lamp factory locations and gold mining zones. The GEM concentrations recorded in Mexico City did not exceed the WHO atmospheric limit of 200 ng m-3. We performed statistical correlation analysis which suggests equivalent sources between Hg and other atmospheric pollutants, mainly NO2 and SO2, emitted from urban combustion and industrial plants. The atmospheric Hg emissions are basically controlled by sunlight radiation, as well as having a direct relationship with meteorological parameters. The area of the city studied herein is characterized by high traffic density, cement production, and municipal solid waste (MSW) treatment, which constantly release GEM into the atmosphere. In this study, we included the simulation with the HYSPLIT dispersion model from three potential areas of GEM release. Emissions from industrial corridors and volcanic plumes localized outside the urban area contribute to the pollution of Mexico City and mainly affect the northern area during specific periods and climate conditions. Using the USEPA model, we assessed the human health risk resulting from exposure to inhaled GEM among residents of Mexico City. The results of the health risk assessment indicated no significant noncarcinogenic risk (hazard quotient (HQ) < 1) or consequent adverse effects for children and adults living in the sampling area over the study period. GEM emissions inventory data is necessary to improve our knowledge about the Hg contribution and effect in urban megacity areas with the objective to develop public safe policy and implementing the Minamata Convention.
| S-EPMC9130986 | biostudies-literature
Project description:Atmospheric mercury measurements carried out in the recent decades have been a subject of bias largely due to insufficient consideration of metrological traceability and associated measurement uncertainty, which are ultimately needed for the demonstration of comparability of the measurement results. This is particularly challenging for gaseous HgII species, which are reactive and their ambient concentrations are very low, causing difficulties in proper sampling and calibration. Calibration for atmospheric HgII exists, but barriers to reliable calibration are most evident at ambient HgII concentration levels. We present a calibration of HgII species based on nonthermal plasma oxidation of Hg0 to HgII. Hg0 was produced by quantitative reduction of HgII in aqueous solution by SnCl2 and aeration. The generated Hg0 in a stream of He and traces of reaction gas (O2, Cl2, or Br2) was then oxidized to different HgII species by nonthermal plasma. A highly sensitive 197Hg radiotracer was used to evaluate the oxidation efficiency. Nonthermal plasma oxidation efficiencies with corresponding expanded standard uncertainty values were 100.5 ± 4.7% (k = 2) for 100 pg of HgO, 96.8 ± 7.3% (k = 2) for 250 pg of HgCl2, and 77.3 ± 9.4% (k = 2) for 250 pg of HgBr2. The presence of HgO, HgCl2, and HgBr2 was confirmed by temperature-programmed desorption quadrupole mass spectrometry (TPD-QMS). This work demonstrates the potential for nonthermal plasma oxidation to generate reliable and repeatable amounts of HgII compounds for routine calibration of ambient air measurement instrumentation.
| S-EPMC9201811 | biostudies-literature
Project description:Mercury has a strong environmental impact since both its organic and inorganic forms are toxic, and it represents a pollutant of global concern. Liquid Hg is highly volatile and can be released during natural and anthropogenic processes in the hydrosphere, biosphere and atmosphere. In this study, the distribution of Gaseous Elemental Mercury (GEM) and the total and leached mercury concentrations on paint, plaster, roof tiles, concrete, metals, dust and wood structures were determined in the main buildings and structures of the former Hg-mining area of Abbadia San Salvatore (Siena, Central Italy). The mining complex (divided into seven units) covers a surface of about 65 ha and contains mining structures and managers' and workers' buildings. Nine surveys of GEM measurements were carried out from July 2011 to August 2015 for the buildings and structures located in Units 2, 3 and 6, the latter being the area where liquid mercury was produced. Measurements were also performed in February, April, July, September and December 2016 in the edifices and mining structures of Unit 6. GEM concentrations showed a strong variability in time and space mostly depending on ambient temperature and the operational activities that were carried out in each building. The Unit 2 surveys carried out in the hotter period (from June to September) showed GEM concentrations up to 27,500 ng·m-3, while in Unit 6, they were on average much higher, and occasionally, they saturated the GEM measurement device (>50,000 ng·m-3). Concentrations of total (in mg·kg-1) and leached (in ?g·L-1) mercury measured in different building materials (up to 46,580 mg·kg-1 and 4470 mg·L-1, respectively) were highly variable, being related to the edifice or mining structure from which they were collected. The results obtained in this study are of relevant interest for operational cleanings to be carried out during reclamation activities.
| S-EPMC5409626 | biostudies-literature
Project description:Sources of neurotoxic mercury in forests are dominated by atmospheric gaseous elemental mercury (GEM) deposition, but a dearth of direct GEM exchange measurements causes major uncertainties about processes that determine GEM sinks. Here we present three years of forest-level GEM deposition measurements in a coniferous forest and a deciduous forest in northeastern USA, along with flux partitioning into canopy and forest floor contributions. Annual GEM deposition is 13.4 ± 0.80 μg m-2 (coniferous forest) and 25.1 ± 2.4 μg m-2 (deciduous forest) dominating mercury inputs (62 and 76% of total deposition). GEM uptake dominates in daytime during active vegetation periods and correlates with CO2 assimilation, attributable to plant stomatal uptake of mercury. Non-stomatal GEM deposition occurs in the coniferous canopy during nights and to the forest floor in the deciduous forest and accounts for 24 and 39% of GEM deposition, respectively. Our study shows that GEM deposition includes various pathways and is highly ecosystem-specific, which complicates global constraints of terrestrial GEM sinks.
| S-EPMC10175444 | biostudies-literature
Project description:In the Mexico City metropolitan area (MCMA), 70% of the water for 18 million inhabitants is derived from the Basin of Mexico regional aquifer. To provide an overview of the quality of the groundwater, a longitudinal study was conducted, in which 30 sites were randomly selected from 1,575 registered extraction wells. Samples were taken before and after chlorine disinfection during both the rainy and dry seasons (2000-2001). Microbiological parameters (total coliforms, fecal coliforms, streptococci, and Vibrio spp.), the presence of Helicobacter pylori, and physicochemical parameters, including the amount of trihalomethanes (THMs), were determined. Although microorganisms and inorganic and organic compounds were evident, they did not exceed current permissible limits. Chlorine levels were low, and the bacterial counts were not affected by chlorine disinfection. Eighty-four bacterial species from nine genera normally associated with fecal contamination were identified in water samples. H. pylori was detected in at least 10% of the studied samples. About 40% of the samples surpassed the THM concentration allowed by Mexican and U.S. regulations, with levels of chloroform being high. The quality of the water distributed to the MCMA varied between the rainy and dry seasons, with higher levels of pH, nitrates, chloroform, bromodichloromethane, total organic carbon, and fecal streptococci during the dry season. This study showed that the groundwater distribution system is susceptible to contamination and that there is a need for a strict, year-round disinfection strategy to ensure adequate drinking-water quality. This situation in one of the world's megacities may reflect what is happening in large urban centers in developing countries which rely on a groundwater supply.
| S-EPMC1214652 | biostudies-literature
Project description:We implemented a spatial model for analysing PM 10 maxima across the Mexico City metropolitan area during the period 1995-2016. We assumed that these maxima follow a non-identical generalized extreme value (GEV) distribution and modeled the trend by introducing multivariate smoothing spline functions into the probability GEV distribution. A flexible, three-stage hierarchical Bayesian approach was developed to analyse the distribution of the PM 10 maxima in space and time. We evaluated the statistical model's performance by using a simulation study. The results showed strong evidence of a positive correlation between the PM 10 maxima and the longitude and latitude. The relationship between time and the PM 10 maxima was negative, indicating a decreasing trend over time. Finally, a high risk of PM 10 maxima presenting levels above 1000 μ g/m 3 (return period: 25 yr) was observed in the northwestern region of the study area.
| S-EPMC5551172 | biostudies-other
Project description:Evolutionary analyses of viral sequences can provide insights into transmission dynamics, which in turn can optimize prevention interventions. Here, we characterized the dynamics of HIV transmission within the Mexico City metropolitan area. HIV pol sequences from persons recently diagnosed at the largest HIV clinic in Mexico City (between 2016 and 2021) were annotated with demographic/geographic metadata. A multistep phylogenetic approach was applied to identify putative transmission clades. A data set of publicly available sequences was used to assess international introductions. Clades were analyzed with a discrete phylogeographic model to evaluate the timing and intensity of HIV introductions and transmission dynamics among municipalities in the region. A total of 6,802 sequences across 96 municipalities (5,192 from Mexico City and 1,610 from the neighboring State of Mexico) were included (93.6% cisgender men, 5.0% cisgender women, and 1.3% transgender women); 3,971 of these sequences formed 1,206 clusters, involving 78 municipalities, including 89 clusters of ≥10 sequences. Discrete phylogeographic analysis revealed (i) 1,032 viral introductions into the region, over one-half of which were from the United States, and (ii) 354 migration events between municipalities with high support (adjusted Bayes factor of ≥3). The most frequent viral migrations occurred between northern municipalities within Mexico City, i.e., Cuauhtémoc to Iztapalapa (5.2% of events), Iztapalapa to Gustavo A. Madero (5.4%), and Gustavo A. Madero to Cuauhtémoc (6.5%). Our analysis illustrates the complexity of HIV transmission within the Mexico City metropolitan area but also identifies a spatially active transmission area involving a few municipalities in the north of the city, where targeted interventions could have a more pronounced effect on the entire regional epidemic. IMPORTANCE Phylogeographic investigation of the Mexico City HIV epidemic illustrates the complexity of HIV transmission in the region. An active transmission area involving a few municipalities in the north of the city, with transmission links throughout the region, is identified and could be a location where targeted interventions could have a more pronounced effect on the entire regional epidemic, compared with those dispersed in other manners.
| S-EPMC9327710 | biostudies-literature
Project description:Background. Mexico City Metropolitan Area (MCMA) has the largest number of COVID-19 (coronavirus disease 2019) cases in Mexico and is at risk of exceeding its hospital capacity in early 2021. Methods. We used the Stanford-CIDE Coronavirus Simulation Model (SC-COSMO), a dynamic transmission model of COVID-19, to evaluate the effect of policies considering increased contacts during the end-of-year holidays, intensification of physical distancing, and school reopening on projected confirmed cases and deaths, hospital demand, and hospital capacity exceedance. Model parameters were derived from primary data, literature, and calibrated. Results. Following high levels of holiday contacts even with no in-person schooling, MCMA will have 0.9 million (95% prediction interval 0.3-1.6) additional COVID-19 cases between December 7, 2020, and March 7, 2021, and hospitalizations will peak at 26,000 (8,300-54,500) on January 25, 2021, with a 97% chance of exceeding COVID-19-specific capacity (9,667 beds). If MCMA were to control holiday contacts, the city could reopen in-person schools, provided they increase physical distancing with 0.5 million (0.2-0.9) additional cases and hospitalizations peaking at 12,000 (3,700-27,000) on January 19, 2021 (60% chance of exceedance). Conclusion. MCMA must increase COVID-19 hospital capacity under all scenarios considered. MCMA's ability to reopen schools in early 2021 depends on sustaining physical distancing and on controlling contacts during the end-of-year holiday.
| S-EPMC8512280 | biostudies-literature
Project description:Meteorology and long-term trends in air pollutant concentrations may obscure the results from short-term policies implemented to improve air quality. This study presents changes in CO, NO2, O3, SO2, PM10, and PM2.5 based on their anomalies during the COVID-19 partial (Phase 2) and total (Phase 3) lockdowns in Mexico City (MCMA). To minimise the impact of the air pollutant long-term trends, pollutant anomalies were calculated using as baseline truncated Fourier series, fitted with data from 2016 to 2019, and then compared with those from the lockdown. Additionally, days with stagnant conditions and heavy rain were excluded to reduce the impact of extreme weather changes. Satellite observations for NO2 and CO were used to contrast the ground-based derived results. During the lockdown Phase 2, only NO2 exhibited significant decreases (p < 0.05) of between 10 and 23% due to reductions in motor vehicle emissions. By contrast, O3 increased (p < 0.05) between 16 and 40% at the same sites where NO2 decreased. During Phase 3, significant decreases (p < 0.05) were observed for NO2 (43%), PM10 (20%), and PM2.5 (32%) in response to the total lockdown. Although O3 concentrations were lower in Phase 3 than during Phase 2, those did not decrease (p < 0.05) from the baseline at any site despite the total lockdown. SO2 decreased only during Phase 3 in a near-road environment. Satellite observations confirmed that NO2 decreased and CO stabilised during the total lockdown. Air pollutant changes during the lockdown could be overestimated between 2 and 10-fold without accounting for the influences of meteorology and long-term trends in pollutant concentrations. Air quality improved significantly during the lockdown driven by reduced NO2 and PM2.5 emissions despite increases in O3, resulting in health benefits for the MCMA population. A health assessment conducted suggested that around 588 deaths related to air pollution exposure were averted during the lockdown. Our results show that to reduce O3 within the MCMA, policies must focus on reducing VOCs emissions from non-mobile sources. The measures implemented during the COVID-19 lockdowns provide valuable information to reduce air pollution through a range of abatement strategies for emissions other than from motor vehicles.
| S-EPMC8026884 | biostudies-literature
Project description:We present a direct comparison between two independent methods for the measurement of gaseous elemental mercury (GEM) mass concentration: isotope dilution cold-vapor inductively coupled plasma mass spectrometry (ID-CV-ICP-MS) and laser absorption spectroscopy (LAS). The former technique combined with passive sorbent tube sampling is currently the primary method at NIST for mercury gas standards traceability to the International System of Units (SI). This traceability is achieved via measurements on a mercury-containing reference material. The latter technique has been recently developed at NIST and involves real-time measurements of light attenuation caused by GEM, with SI traceability based in part on the known spontaneous emission lifetime of the probed 6 1S0-6 3P1 intercombination transition of elemental mercury (Hg0). Using a steady-flow Hg0-in-air generator to produce samples measured by both methods, we use LAS to measure the sample gas and in parallel we collect the Hg0 on sorbent tubes to be subsequently analyzed using ID-CV-ICP-MS. Over the examined mass concentration range (41 μg/m3 to 287 μg/m3 Hg0 in air), the relative disagreement between the two approaches ranged from (1.0 to 1.8)%. The relative combined standard uncertainty on average is 0.4% and 0.9%, for the LAS and MS methods, respectively. Our comparison studies help validate the accuracy of the ID-CV-ICP-MS primary method as well as establish the LAS technique as an attractive alternative primary method for SI-traceable measurements of GEM.
| S-EPMC8202126 | biostudies-literature