Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Microwave Assisted Selective Hydrolysis of Polyamides from Multicomponent Carpet Waste.

ABSTRACT: Selective hydrolysis of polyamide-6 (PA-6) and polyamide-66 (PA-66) from commercial multicomponent PA-6/PA-66/polypropylene (PP) carpet is demonstrated by a microwave-assisted acid catalyzed hydrothermal process, yielding monomeric products and solid polypropylene residue. First, an effective method is established to chemically recycle neat PA-6 and PA-66 granules using microwave irradiation. The optimized, hydrochloric acid (HCl) catalyzed process leads to selective production of monomers, 6-aminocaproic acid or adipic acid and hexamethylenediamine, after only 30 min. A piece of commercial carpet is then recycled using the same reaction conditions, but with the alteration of the reaction time from 1 to 6 h. The produced water-soluble products and the remaining solid residue are carefully characterized, proving that the polyamide-part of the carpet is selectively hydrolyzed into water-soluble monomers and the polypropylene-part remains as an unconverted solid that can be further used to produce recycled filaments containing the carpet residue and virgin polypropylene. The developed process opens the possibility to recycle multicomponent materials, such as carpets, through selective hydrolysis. It can also contribute to a circular economy, producing original monomers and materials ready for a new life-cycle.

SUBMITTER: Backstrom E

PROVIDER: S-EPMC8272014 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Chemical Recycling of Aliphatic Polyamides by Microwave-Assisted Hydrolysis for Efficient Monomer Recovery.

Project description:We report on a simple and efficient chemical recycling process for aliphatic polyamides (PA 66, PA 1010, PA 11, and PA 12), whereby PAs are converted exclusively into their constituent monomers even in the presence of reinforcement additives, such as carbon- and glass-fibers. In this process, the rate of PA hydrolysis reaction, performed under microwave irradiation in the presence of HCl as an acid catalyst, depends on the PA type, the HCl/amide mole ratio, and the type and amount of reinforcement additives. PA 66 is completely converted into the constituent monomers at 200 °C and a 1.25 HCl/amide mole ratio in 10 min. Long-chain PAs (PA 11, PA 12, and PA 1010) and PAs containing glass- or carbon-fiber reinforcement additives need at the same experimental conditions longer reaction times. Alternatively, they can be completely hydrolyzed at 200 °C within a comparable reaction time at a higher HCl/amide mole ratio of 2.5. Complete and straightforward conversion of PAs into the constituent monomers in the absence of side reactions simplifies the isolation and purification of monomers and reinforcement additives, which have been recovered in high yields and quality comparable to those of commercially available chemicals.

| S-EPMC7662757 | biostudies-literature

Microwave assisted synthesis of Py-Im polyamides.

Project description:Microwave synthesis was utilized to rapidly build Py-Im polyamides in high yields and purity using Boc-protection chemistry on Kaiser oxime resin. A representative polyamide targeting the 5'-WGWWCW-3' (W = A or T) subset of the consensus Androgen and Glucocorticoid Response Elements was synthesized in 56% yield after 20 linear steps and HPLC purification. It was confirmed by Mosher amide derivatization of the polyamide that a chiral ?-amino acid does not racemize after several additional coupling steps.

| S-EPMC3365540 | biostudies-literature

Circular Design and Functionalized Upcycling of Waste Commodity Polystyrene via C-H Activation Using Microwave-Assisted Multicomponent Synthesis.

Project description:The inefficient reuse and recycling of plastics-and the current surge of medical and take-out food packaging use during the pandemic-have exacerbated the environmental burden. This impels the development of alternative recycling/upcycling methods to pivot toward circularity. We report the use of the Mannich three-component coupling reaction for the modification of polystyrene (PS) recovered with a 99.1% yield from waste food containers to form functionalized nitrogen and oxygen-rich PS derivatives. A series of functionalized PS with increasing moles of formaldehyde (F) and morpholine (M) (0.5 × 10-2, 1.0 × 10-2, and 2.0 × 10-2 mol) was achieved using a sol-gel-derived Fe-TiO2 catalyst in a solvent-free, microwave-assisted synthesis. Modified polymers were characterized with viscometry, 1H NMR, 13CNMR (DEPT) FTIR, XPS, UV, and TGA. Functionalization scaled with an increasing ratio, validating the 3CR approach. Further functionalization was constrained by a competing oxidative degradation; however, the varying hydrogen bond density due to nitrogen and oxygen-rich species at higher ratios was shown to compensate for molecular weight loss. The integration of the N-cyclic quaternary ammonium cations exhibited the potential of functionalized polymers for ion-exchange membrane applications.

| S-EPMC10384716 | biostudies-literature

Microwave-Assisted Acid Hydrolysis vs. Conventional Hydrolysis to Produce Sapogenin-Rich Products from Fenugreek Extracts.

Project description:The acid hydrolysis of saponins is commonly performed by conventional heating to produce sapogenin-rich products of bioactive interest, but alternative hydrolysis methods and their impact on bioactivity have been unexplored. We compared the conventional method with microwave-assisted acid hydrolysis (MAAH) of a commercial saponin-rich extract from a typical saponin source, fenugreek, focusing on the study of temperature (100, 120, 130, 140, 150 °C) and time (10, 20, 30, 40 min) of hydrolysis. The impact of these factors was assayed on both the sapogenin yield and the bioactivity of the hydrolyzed products, specifically their antioxidant and lipase inhibitory activities. The highest sapogenin content (34 g/100 g extract) was achieved by MAAH at 140 °C and 30 min, which was higher than conventional hydrolysis at both reference conditions (100 °C, 60 min, 24.6 g/100 g extract) and comparative conditions (140 °C, 30 min, 17 g/100 g extract) (p < 0.001). Typical steroid artifacts from sapogenins were observed in very small amounts, regardless of the method of hydrolysis. Antioxidant activity of MAAH hydrolyzed extracts (around 80% DPPH inhibition) was barely affected by time and temperature, but pancreatic lipase inhibitory activity was higher (>65%) at lower MAAH temperature (<130 °C) and time (<30 min) of hydrolysis. MAAH is shown as a valid alternative to produce selective sapogenin-rich extracts from fenugreek with minor impact on their bioactivities, and whose magnitude can be modulated by the hydrolysis conditions.

| S-EPMC9266256 | biostudies-literature

Chemical Recycling of Polyurethane Waste via a Microwave-Assisted Glycolysis Process.

Project description:In this work, we explored a microwave-assisted glycolysis process to chemically recycle rigid polyurethane (PU) foam waste to obtain a single-phase product with suitable physio-chemical properties as a secondary raw material for the preparation of new rigid PU products. Such an approach was compared to a conventionally heated (ConvH) process, analyzing the performances of different catalysts. The use of microwaves allowed a 94% decrease in the reaction time scale of rigid PU depolymerization, with a concurrent 45% reduction in energy expense. By using a PU/diethylene glycol mass ratio of 1.5, best performances were obtained with a 30 mmol/100gPU potassium acetate concentration, both in terms of the product viscosity and aromatic amine byproduct content. The glycolysis products recovered were employed in substitution to virgin polyol for rigid PU foam preparation, showing improved compressive strength and comparable thermal insulation properties up to a 30% content with respect to the traditional non-recycled counterpart.

| S-EPMC9909786 | biostudies-literature

Microwave-Assisted Catalytic Synthesis of Bio-Based Copolymers from Waste Cooking Oil.

Project description:Solvent-free copolymerization of epoxides derived from fatty esters of waste cooking oil with phthalic anhydride using (salen)CrIIICl as catalyst and n-Bu₄NCl/DMAP (tetrabutylammonium chloride/4-(dimethylamino)pyridine) as co-catalysts was carried out for the first time under microwave irradiation, where reaction time was reduced from a number of hours to minutes. The polyesters were obtained with molecular weight (Mw = 3100-6750 g/mol) and dispersity values (D = 1.18-1.92) when (salen)CrIIICl/n-Bu₄NCl was used as catalysts. Moreover, in the case of DMAP as a co-catalyst, polyesters with improved molecular weight (Mw = 5500-6950 g/mol) and narrow dispersity values (D = 1.07-1.28) were obtained even at reduced concentrations of (salen)CrIIICl and DMAP. The obtained products were characterized and evaluated by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), proton nuclear magnetic resonance (¹H-NMR) spectroscopy, gel permeation chromatography (GPC), thermogravimetric analysis (TGA) and differential scanning calorimetric (DSC) Techniques.

| S-EPMC5503379 | biostudies-literature

Cellulosic Ethanol Production Using Waste Wheat Stillage after Microwave-Assisted Hydrotropic Pretreatment.

Project description:One of the key elements influencing the efficiency of cellulosic ethanol production is the effective pretreatment of lignocellulosic biomass. The aim of the study was to evaluate the effect of microwave-assisted pretreatment of wheat stillage in the presence of sodium cumene sulphonate (NaCS) hydrotrope used for the production of second-generation bioethanol. As a result of microwave pretreatment, the composition of the wheat stillage biomass changed significantly when compared with the raw material used, before treatment. Microwave-assisted pretreatment with NaCS effectively reduced the lignin content and hemicellulose, making cellulose the dominant component of biomass, which accounted for 42.91 ± 0.10%. In post pretreatment, changes in biomass composition were also visible on FTIR spectra. The peaks of functional groups and bonds characteristic of lignins (C-O vibration in the syringyl ring, asymmetric bending in CH3, and aromatic skeleton C-C stretching) decreased. The pretreatment of the analyzed lignocellulosic raw material with NaCS resulted in the complete conversion of glucose to ethanol after 48 h of the process, with yield (in relation to the theoretical one) of above 91%. The highest observed concentration of ethanol, 23.57 ± 0.10 g/L, indicated the high effectiveness of the method used for the pretreatment of wheat stillage that did not require additional nutrient supplementation.

| S-EPMC9506164 | biostudies-literature

Microwave-assisted enzymatic hydrolysis to produce xylooligosaccharides from rice husk alkali-soluble arabinoxylan.

Project description:The prebiotic properties of xylooligosaccharides (XOS) and arabino-xylooligosaccharides (AXOS) produced from rice husk (RH) using microwave treatment combined with enzymatic hydrolysis were evaluated. The RH was subjected to microwave pretreatment at 140, 160 and 180 °C for 5, 10 and 15 min to obtain crude arabinoxylan (AX). Increasing microwave pretreatment time increased sugar content. Crude AX was extracted with 2% (w/v) sodium hydroxide at 25 °C for 24 h and used as a substrate for XOS production by commercial xylanases. Results showed that oligosaccharides produced by Pentopan Mono BG and Ultraflo Max provided xylobiose and xylotriose as the main products. AXOS was also present in the oligosaccharides that promoted growth of Lactobacillus spp. and resisted degradation by over 70% after exposure to simulated human digestion.

| S-EPMC8741828 | biostudies-literature

Microwave-assisted conversion of palm kernel shell biomass waste to photoluminescent carbon dots.

Project description:In the present work, palm kernel shell (PKS) biomass waste has been used as a low-cost and easily available precursor to prepare carbon dots (CDs) via microwave irradiation method. The impacts of the reacting medium: water and diethylene glycol (DEG), and irradiation period, as well as the presence of chitosan on the CDs properties, have been investigated. The synthesized CDs were characterized by several physical and optical analyses. The performance of the CDs in terms of bacteria cell imaging and copper (II) ions sensing and removal were also explored. All the CDs possessed a size of 6-7 nm in diameter and the presence of hydroxyl and alkene functional groups indicated the successful transformation of PKS into CDs with carbon core consisting of C = C elementary unit. The highest quantum yield (44.0%) obtained was from the CDs synthesised with DEG as the reacting medium at irradiation period of 1 min. It was postulated that the high boiling point of DEG resulted in a complete carbonisation of PKS into CDs. Subsequently, the absorbance intensity and photoluminescence intensity were also much higher compared to other precursor formulation. All the CDs fluoresced in the bacteria culture, and fluorescence quenching occurred in the presence of heavy metal ions. These showed the potential of CDs synthesised from PKS could be used for cellular imaging and detection as well as removal of heavy metal ions.

| S-EPMC7712893 | biostudies-literature

Phase-Selective Microwave Assisted Synthesis of Iron(III) Aminoterephthalate MOFs.

Project description:Iron(III) aminoterephthalate Metal-Organic Frameworks (Fe-BDC-NH2 MOFs) have been demonstrated to show potential for relevant industrial and societal applications (i.e., catalysis, drug delivery, gas sorption). Nevertheless, further analysis is required in order to achieve their commercial production. In this work, a systematic synthetic strategy has been followed, carrying out microwave (MW) assisted hydro/solvothermal reactions to rapidly evaluate the influence of different reaction parameters (e.g., time, temperature, concentration, reaction media) on the formation of the benchmarked MIL-101-NH2, MIL-88B-NH2, MIL-53-NH2 and MIL-68-NH2 solids. Characterization of the obtained solids by powder X-ray diffraction, dynamic light scattering and transmission electron microscopy allowed us to identify trends to the contribution of the evaluated parameters, such as the relevance of the concentration of precursors and the impact of the reaction medium on phase crystallization. Furthermore, we presented here for the first time the MW assisted synthesis of MIL-53-NH2 in water. In addition, pure MIL-101-NH2 was also produced in water while MIL-88-NH2 was the predominant phase obtained in ethanol. Pure phases were produced with high space-time yields, unveiling the potential of MW synthesis for MOF industrialization.

| S-EPMC7142456 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data