Gold Leaching from an Oxide Ore Using Thiocyanate as a Lixiviant: Process Optimization and Kinetics.
Ontology highlight
ABSTRACT:
SUBMITTER: Azizitorghabeh A
PROVIDER: S-EPMC8280645 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The presence of sulfur impurities in complex iron ores represents a significant challenge for the iron mining and steel-making industries as their removal often necessitates the use of hazardous chemicals and energy-intensive processes. Here, we examined the microbial and mineralogical composition of both primary and secondary iron concentrates, identifying the presence of Sulfobacillus spp. and Leptospirillum spp., while sulfur-oxidizing bacteria were absent. We also observed that these concentrates displayed up to 85% exposed pyrrhotite. These observations led us to explore the capacity of Acidithiobacillus thiooxidans to remove pyrrhotite-sulfur impurities from iron concentrates. Employing stirred tank bioreactors operating at 30°C and inoculated with 5·106 (At. thiooxidans cells mL-1), we achieved 45.6% sulfur removal over 16 days. Then, we evaluated packed leaching columns operated at 30°C, where the At. thiooxidans enriched system reached 43.5% desulfurization over 60 days. Remarkably, sulfur removal increased to 80% within 21 days under potassium limitation. We then compared the At. thiooxidans-mediated desulfurization process, with and without air supply, under potassium limitation, varying the initial biomass concentration in 1-m columns. Aerated systems facilitated approximately 70% sulfur removal across the entire column with minimal iron loss. In contrast, non-aerated leaching columns achieved desulfurization levels of only 6% and 26% in the lower and middle sections of the column, respectively. Collectively, we have developed an efficient, scalable biological sulfur-removal technology for processing complex iron ores, aligning with the burgeoning demand for sustainable practices in the mining industry.
| S-EPMC10751661 | biostudies-literature
Project description:Metal-organic frameworks (MOFs) are currently recognized as unique platforms for environmental studies. This study evaluated the potential of nine MOFs from ZIF-8, ZIF-67, and UIO-66 families for the removal of ciprofloxacin (CIP), a toxic, bio-accumulative, and persistent fluoroquinolone antibiotic. ZIF-67-SO4, with a rhombic crystalline morphology and 1375 m2/g BET surface area, has the highest CIP adsorption efficiency among the studied MOFs. The mathematical sorption model predicted that the highest CIP removal (99.2%) occurs when adsorbent dose, pH, and agitation time are adjusted to 6.82, 832.4 mg/L, and 39.95 min, respectively. Further studies revealed that the CIP adsorbed onto ZIF-67-SO4 in monolayer (qmax: 2537.5 mg/g) and chemisorption controlled the rate of the process. Mass transfer kinetic coefficients improved significantly by sonication at 35 KHz in comparison with mechanical agitation. Thermodynamic parameters (minus signs of ?G° [7.8 to 14.2], positive signs of ?H° (58.9 KJ/mol), and ?S° (0.23 KJ/mol·K)) demonstrated the spontaneous, endothermic, and chemical sorption of CIP. The level of cobalt leached from ZIF-67-SO4 structure varied 1.2-4.5 mg/L, depending on pH, mixing time, and agitation type. In conclusion, the excellent adsorption properties of ZIF-67-SO4 for CIP, made it an outstanding candidate for environmental protection purposes.
| S-EPMC6835299 | biostudies-literature
Project description:Within the various approaches to organic waste handling, composting has been recognized as an acceptable method to valorize organic waste. Composting is an aerobic technique of microbial disruption of organic matter which results with compost as a final product. To guarantee the quality of the compost, key process factors (like the moisture content, temperature, pH, and carbon-to-nitrogen ratio) must be maintained. In order to optimize the process, nine composting trials using grape skins were conducted in the present study under various initial moisture content and air flow rate conditions over the course of 30 days. The processes were monitored through physicochemical variables and microbiological activity. Also, the kinetics of the organic matter degradation and microbial growth were investigated. Although the thermophile phase was only achieved in experiments 3 and 8, the important variables proved the efficiency of all nine composting processes. The organic carbon content and C/N ratio decreased after the 30 days of composting processes and a great color change was noticed too. The values for the germination index for all experiments were above 80%, which means that the final products are non-toxic for plants. Also, the greatest change in organic carbon content in was evident in experiment 3; it decreased from 71.57 to 57.31%. And consequently, the rate of degradation for that experiment was the highest, at 0.0093 1/day. Furthermore, the response surface methodology was used to identify optimal operating conditions for grape skin composting and the obtained conditions were 58.15% for the initial moisture content and 1.0625 L/min for the air flow rate.
| S-EPMC10968801 | biostudies-literature
Project description:Seafloor massive sulfide deposits have attracted much interest as mineral resources. Therefore, the potential environmental impacts of full-scale mining should be considered. In this study, we focused on metal and metalloid contamination that could be triggered by accidental leakage and dispersion of hydrothermal ore particulates from mining vessels into surface seawater. We determined the leaching potential of metals and metalloids from four hydrothermal ores collected from the Okinawa Trough into aerobic seawater and then evaluated the toxic effects of ore leachates on a phytoplankton species, Skeletonema marinoi-dohrnii complex, which is present ubiquitously in the ocean. Large amounts of metals and metalloids were released from the ground hydrothermal ores into seawater within 5 min under aerobic conditions. The main components of leachates were Zn + Pb, As + Sb, and Zn + Cu, which were obtained from the Fe-Zn-Pb-rich and Zn-Pb-rich zero-age, Ba-rich, and Fe-rich ores, respectively. The leachates had different chemical compositions from those of the ore. The rapid release and difference in chemical compositions between the leachates and the ores indicated that substances were not directly dissolved from the sulfide-binding mineral phase but from labile phases mainly on the adsorption-desorption interface of the ores under these conditions. All ore leachates inhibited the growth of S. marinoi-dohrnii complex but with different magnitudes of toxic effects. These results indicate that the fine particulate matter of hydrothermal ores is a potential source of toxic contamination that may damage primary production in the ocean. Therefore, we insist on the necessity for the prior evaluation of toxic element leachability from mineral ores into seawater to minimize mining impacts on the surface environment.
| S-EPMC6044885 | biostudies-literature
Project description:Microbial cellulases are the enzymes widely studied due to their enormous applications in biochemical industry. Among 12 fungal isolates isolated from mangrove plant debris and soil sample collected from Valanthakad Mangroves, Kerala, India, 3 of them were found to exhibit cellulolytic activity. Among them, the most potent isolate which exhibited maximum cellulolytic activity was identified as Trichoderma viride VKF3 [Gene bank accession number- JX683684.1] based on colony morphology, microscopic observation and molecular centeracterization using D1/D2 region amplification. The isolate T. viride VKF3 was found to be non-phytopathogenic against the selected plants. Neighbour joining tree depicted its least divergence rate from the root taxon HM466686.1. T. viride VKF3 was grown under dynamic carbon, nitrogen sources, pH and temperature of the medium to draw out the optimum conditions for cellulase production. Protein stability kinetics and biomass production was also studied upto 11(th) day of incubation. It was evident from the study, that dextrose and beef extract could be used as major carbon and nitrogen sources in submerged fermentation at pH 9.0 and incubation temperature of 25°C to get maximum CMCase yield. Optimum enzyme recovery period was identified between 5(th) to 9(th) days of incubation beyond which the enzyme activity was reduced. By comparing two fermentation methods, submerged fermentation was found to be the best for maximum enzyme production. But utilization of substrates like sugarcane bagasse and cassava starch waste in the SSF offers a better scope in biodegradation of solid waste contributing to solid waste management.
| S-EPMC3940716 | biostudies-literature
Project description:In this study, several machine learning models were used to analyze the process variables of electric-field-enhanced pyrolusite leaching and predict the leaching rate of manganese, and the applicability of those models in the leaching process of hydrometallurgy was compared. It showed that there was no correlation between the six leaching conditions; in addition to the leaching time, the concentrations of sulfuric acid and ferrous sulfate had great influences on the leaching of pyrolusite. The results of the prediction models showed that the support vector regression model has the best prediction performance, with regression index (R 2) = 0.92 and mean square error = 25.04, followed by the gradient boosting regression model (R 2 > 0.85). In this research, machine learning models were applied to the optimization of the manganese leaching process, and the research process and methods were also applicable to other hydrometallurgical processes for majorization and result prediction.
| S-EPMC9798733 | biostudies-literature
Project description:Gold nanoparticles are one of the most used nanomaterials. They are usually synthesized by the reduction of gold(III) chloride. However, the presence of halide ions in the reaction mixture is not always welcome. In some cases, these ions have detrimental influence on the morphology and structure of resulting nanoparticles. Here, we present a simple and halogen-free procedure to prepare gold nanoparticles by reduction of gold(III) oxide in neat oleylamine. The method provides the particles with an average size below 10 nm and dispersity of tens of percent. The process of nanoparticle formation was monitored using UV-Vis spectroscopy. The structure and chemical composition of the nanoparticles was determined by SEM, XPS and EDX. We also proposed the mechanism of reduction of gold(III) oxide based on MS, IR and NMR data. Importantly, the synthetic protocol is general and applicable for the preparation of other coinage metal nanoparticles from the corresponding metal oxides. For instance, we demonstrated that the absence of halogen enables efficient alloying of metals when preparing gold-silver bimetallic nanoparticles.
| S-EPMC5003902 | biostudies-other
Project description:Manganese nodules from ocean bed are potential resources of Cu, Ni, and Co for which land-based deposits are scarce in India. The present work describes a novel approach of using glycerol, a nontoxic biomass-derived reductant, for the reductive acid leaching of manganese nodules. Parameters such as acid concentration, time, temperature, and pulp density were optimized for leaching. The optimal leaching conditions were found to be 10% (w/v) pulp density and 10% (v/v) H2SO4 at 80 °C with 1% (v/v) glycerol yielding >95% of Ni and >98% Cu, Co, and Mn extraction within an hour. Kinetic analysis of the data based on the initial rate method showed that the leaching process was chemical reaction-controlled with an apparent activation energy of 55.47 kJ/mol. Various oxidation intermediates of glycerol formed during leaching were identified using mass spectrometry and Raman spectroscopy, and a probable oxidation pathway of glycerol during the leaching process has been elucidated based on the analysis. Glycerol was oxidized to glyceraldehyde, glyceric acid, tartronic acid, dihydroxyacetone, hydroxy pyruvic acid, glyoxalic acid, oxalic acid, and finally converted to CO2 during leaching. The fast reaction kinetics, near-complete dissolution of manganese, and other associated metals in the nodule can be attributed to the participation of all intermediate products of glycerol oxidation in redox reactions with MnO2, enhancing the overall reduction leaching efficiency.
| S-EPMC8209816 | biostudies-literature
Project description:Nitric oxide (NO) releasing polymers have been widely applied as biomaterials for a variety of biomedical implants and devices. However, the chemical leaching of NO donors and their byproduct species is almost always observed during the application of polymers doped with NO donors, unless the donor is covalently linked to the polymer. Herein, we report the first NO releasing poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) fluorinated copolymer prepared by incorporating a fluorinated S-nitrosothiol as the NO donor. Under physiological conditions, the resulting polymeric films can release NO for 16?days. Importantly, due to both fluorine-fluorine and electrostatic charge interactions between the fluorinated NO donor and the PVDF-HFP copolymer, the total chemical leaching of the fluorinated NO donor and its disulfide product after 9?day was only 0.6% (mol%) of the initial amount of NO donor loaded into the film. These new NO release PVDF-HFP films exhibit antimicrobial and anti-biofilm activities against both Gram positive S. aureus and Gram negative P. aeruginosa strains. The NO-releasing PVDF-HFP polymer can also be coated on Teflon tubing to release NO under physiological conditions for extended time periods. This NO-releasing PVDF-HFP copolymer with greatly reduced chemical leaching could help enhance the biocompatibility and antimicrobial activity of various biomedical devices. STATEMENT OF SIGNIFICANCE: Fluoropolymers have been widely used in creating various biomedical implants and devices. However, nitric oxide (NO) release fluoropolymers have not been well studied to date. Additionally, in the application of biomaterials doped with NO donors, a significant amount of NO donors and their byproducts almost always leach into aqueous environment. We now report an NO releasing poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) fluoropolymer by incorporating a new fluorinated S-nitrosothiol. The NO release can last for 16?days under physiological conditions. The total chemical leaching was determined to be only 0.6?mol% of the initial S-nitrosothiol loaded. As expected, significant antimicrobial/anti-biofilm activities of the NO release PVDF-HFP film were observed against Gram positive S. aureus and Gram negative P. aeruginosa bacterial strains.
| S-EPMC6513704 | biostudies-literature
Project description:A new composite metal-insulator-metal (MIM) system consisting of exceptionally dense non-close-packed (NCP) arrays of gold or silver nanoparticles, porous anodic aluminum oxide (PAAO), and bulk aluminum substrate interacts strongly with visible light and may become a very useful component for optical applications. The proposed MIM structure can be synthesized using accessible lithography-free chemical and physical processes (anodization and capillary force assisted colloidal particle deposition) that are suitable for the low-cost production of specialized devices. Here, we present a systematic study to determine the essential MIM structure parameters (nanoparticle size and PAAO layer thickness) for localized surface plasmon resonance (LSPR) refractometric sensing. A performance comparison was done by recording the spectra of scattered light upon angled illumination in media with different refractive indices. A clear advantage for maximizing the signal to background ratio was observed in the case of 60 and 80 nm Au nanoparticles with a PAAO thickness in a narrow range between 300 and 375 nm. Sensitivity exceeding a 200 nm peak wavelength shift per refractive index unit was found for 60 nm Au nanoparticles on approximately 500-nm-thick PAAO. The experimental observations were supported by finite-difference time-domain (FDTD) simulations.
| S-EPMC9648095 | biostudies-literature