Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhancing sub-bandgap external quantum efficiency by photomultiplication for narrowband organic near-infrared photodetectors.

ABSTRACT: Detection of electromagnetic signals for applications such as health, product quality monitoring or astronomy requires highly responsive and wavelength selective devices. Photomultiplication-type organic photodetectors have been shown to achieve high quantum efficiencies mainly in the visible range. Much less research has been focused on realizing near-infrared narrowband devices. Here, we demonstrate fully vacuum-processed narrow- and broadband photomultiplication-type organic photodetectors. Devices are based on enhanced hole injection leading to a maximum external quantum efficiency of almost 2000% at -10 V for the broadband device. The photomultiplicative effect is also observed in the charge-transfer state absorption region. By making use of an optical cavity device architecture, we enhance the charge-transfer response and demonstrate a wavelength tunable narrowband photomultiplication-type organic photodetector with external quantum efficiencies superior to those of pin-devices. The presented concept can further improve the performance of photodetectors based on the absorption of charge-transfer states, which were so far limited by the low external quantum efficiency provided by these devices.

SUBMITTER: Kublitski J

PROVIDER: S-EPMC8282846 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Organic narrowband near-infrared photodetectors based on intermolecular charge-transfer absorption.

Project description:Blending organic electron donors and acceptors yields intermolecular charge-transfer states with additional optical transitions below their optical gaps. In organic photovoltaic devices, such states play a crucial role and limit the operating voltage. Due to its extremely weak nature, direct intermolecular charge-transfer absorption often remains undetected and unused for photocurrent generation. Here, we use an optical microcavity to increase the typically negligible external quantum efficiency in the spectral region of charge-transfer absorption by more than 40 times, yielding values over 20%. We demonstrate narrowband detection with spectral widths down to 36 nm and resonance wavelengths between 810 and 1,550 nm, far below the optical gap of both donor and acceptor. The broad spectral tunability via a simple variation of the cavity thickness makes this innovative, flexible and potentially visibly transparent device principle highly suitable for integrated low-cost spectroscopic near-infrared photodetection.

| S-EPMC5465315 | biostudies-literature

Photomultiplication-Type Organic Photodetectors for Near-Infrared Sensing with High and Bias-Independent Specific Detectivity.

Project description:Highly responsive organic photodetectors allow a plethora of applications in fields like imaging, health, security monitoring, etc. Photomultiplication-type organic photodetectors (PM-OPDs) are a desirable option due to their internal amplification mechanism. However, for such devices, significant gain and low dark currents are often mutually excluded since large operation voltages often induce high shot noise. Here, a fully vacuum-processed PM-OPD is demonstrated using trap-assisted electron injection in BDP-OMe:C60 material system. By applying only -1 V, compared with the self-powered working condition, the responsivity is increased by one order of magnitude, resulting in an outstanding specific detectivity of ≈1013 Jones. Remarkably, the superior detectivity in the near-infrared region is stable and almost voltage-independent up to -10 V. Compared with two photovoltaic-type photodetectors, these PM-OPDs exhibit the great potential to be easily integrated with state-of-the-art readout electronics in terms of their high responsivity, fast response speed, and bias-independent specific detectivity. The employed vacuum fabrication process and the easy-to-adapt PM-OPD concept enable seamless upscaling of production, paving the way to a commercially relevant photodetector technology.

| S-EPMC8895121 | biostudies-literature

Interface engineering for gain perovskite photodetectors with extremely high external quantum efficiency.

Project description:Efficient CH3NH3PbI3 photodetectors (PDs) with an extremely high gain of the maximum external quantum efficiency (EQE) of 140 000% within the ultraviolet region to the near infrared region (NIR) and an extremely high responsivity (R) under a low bias of -5 V were successfully fabricated. The fabricated devices manifested outstanding environmental stability with only 10% degradation of EQE after being exposed to air for 24 h. These obtained results indicate the promising potential of perovskite PDs for visible light communication applications.

| S-EPMC9056631 | biostudies-literature

Graphene/PbS quantum dot hybrid structure for application in near-infrared photodetectors.

Project description:A graphene-PbS quantum dot (QD) composite for application in high-performance near-infrared (NIR) photodetectors (PDs) is proposed in this study. A single-layer graphene flake and oleic acid-capped PbS QD composite is fabricated through the conventional sonication process, in hexane solution. Field emission scanning electron microscopy images of the graphene-PbS QD composite dispersed on a glass substrate confirm that the composite contains both aggregated graphene flakes and single-layer graphene with wrinkles; Transmission electron microscopy images reveal close packing with uniform size. The increased absorbance and quenched photoluminescence intensity of the graphene-PbS QD composite supports enhanced photoinduced charge transfer between graphene and the PbS QDs. Moreover, the specific Raman mode of the PbS QDs, embedded in the spectrum, is enhanced by combination with graphene, which can be interpreted by SERS as relevant to the photoinduced charge transfer between the Pbs QDs and graphene. For device application, a PD structure comprised by graphene-PbS QDs is fabricated. The photocurrent of the PD is measured using a conventional probe station with a 980-nm NIR laser diode. In the fabricated PD comprising graphene-PbS QDs, five-times higher photocurrent, 22% faster rise time, and 47% faster decay time are observed, compared to that comprising PbS QDs alone. This establishes the potential of the graphene-PbS QD composite for application in ultrathin, flexible, high-performance NIR PDs.

| S-EPMC7385648 | biostudies-literature

Synergistic-potential engineering enables high-efficiency graphene photodetectors for near- to mid-infrared light.

Project description:High quantum efficiency and wide-band detection capability are the major thrusts of infrared sensing technology. However, bulk materials with high efficiency have consistently encountered challenges in integration and operational complexity. Meanwhile, two-dimensional (2D) semimetal materials with unique zero-bandgap structures are constrained by the bottleneck of intrinsic quantum efficiency. Here, we report a near-mid infrared ultra-miniaturized graphene photodetector with configurable 2D potential well. The 2D potential well constructed by dielectric structures can spatially (laterally and vertically) produce a strong trapping force on the photogenerated carriers in graphene and inhibit their recombination, thereby improving the external quantum efficiency (EQE) and photogain of the device with wavelength-immunity, which enable a high responsivity of 0.2 A/W-38 A/W across a broad infrared detection band from 1.55 to 11 µm. Thereafter, a room-temperature detectivity approaching 1 × 109 cm Hz1/2 W-1 is obtained under blackbody radiation. Furthermore, a synergistic effect of electric and light field in the 2D potential well enables high-efficiency polarization-sensitive detection at tunable wavelengths. Our strategy opens up alternative possibilities for easy fabrication, high-performance and multifunctional infrared photodetectors.

| S-EPMC10858052 | biostudies-literature

Silicon/2D-material photodetectors: from near-infrared to mid-infrared.

Project description:Two-dimensional materials (2DMs) have been used widely in constructing photodetectors (PDs) because of their advantages in flexible integration and ultrabroad operation wavelength range. Specifically, 2DM PDs on silicon have attracted much attention because silicon microelectronics and silicon photonics have been developed successfully for many applications. 2DM PDs meet the imperious demand of silicon photonics on low-cost, high-performance, and broadband photodetection. In this work, a review is given for the recent progresses of Si/2DM PDs working in the wavelength band from near-infrared to mid-infrared, which are attractive for many applications. The operation mechanisms and the device configurations are summarized in the first part. The waveguide-integrated PDs and the surface-illuminated PDs are then reviewed in details, respectively. The discussion and outlook for 2DM PDs on silicon are finally given.

| S-EPMC8190178 | biostudies-literature

Improvement of Dynamic Performance and Detectivity in Near-Infrared Colloidal Quantum Dot Photodetectors by Incorporating Conjugated Polymers.

Project description:Colloidal quantum dots (CQDs) have a unique advantage in realizing near-infrared (NIR) photodetection since their optical properties are readily tuned by the particle size, but CQD-based photodetectors (QPDs) presently show a high dark current density (Jd) and insufficient dynamic characteristics. To overcome these two problems, we synthesized and introduced two types of conjugated polymers (CPs) by replacing the p-type CQD layer in the QPDs. The low dielectric constant and insulating properties of CPs under dark conditions effectively suppressed the Jd in the QPDs. In addition, the energy-level alignment and high-hole mobility of the CPs facilitated hole transport. Therefore, both the responsivity and specific detectivity were highly enhanced in the CP-based QPDs. Notably, the dynamic characteristics of the QPDs, such as the -3 dB cut-off frequency and rising/falling response times, were significantly improved in the CP-based QPDs owing to the sizable molecular ordering and fast hole transport of the CP in the film state as well as the low trap density, well-aligned energy levels, and good interfacial contact in the CP-based devices.

| S-EPMC9655137 | biostudies-literature

Near-infrared and visible light dual-mode organic photodetectors.

Project description:We report a dual-mode organic photodetector (OPD) that has a trilayer visible light absorber/optical spacer/near-infrared (NIR) light absorber configuration. In the presence of NIR light, photocurrent is produced in the NIR light-absorbing layer due to the trap-assisted charge injection at the organic/cathode interface at a reverse bias. In the presence of visible light, photocurrent is produced in the visible light-absorbing layer, enabled by the trap-assisted charge injection at the anode/organic interface at a forward bias. A high responsivity of >10 A/W is obtained in both short and long wavelengths. The dual-mode OPD exhibits an NIR light response operated at a reverse bias and a visible light response operated at a forward bias, with a high specific detectivity of ~1013 Jones in both NIR and visible light ranges. A bias-switchable spectral response OPD offers an attractive option for applications in environmental pollution detection, bioimaging process, wellness, and security monitoring in two distinct bands.

| S-EPMC6994203 | biostudies-literature

Highly efficient metallic optical incouplers for quantum well infrared photodetectors.

Project description:Herein, we propose a highly efficient metallic optical incoupler for a quantum well infrared photodetector (QWIP) operating in the spectrum range of 14~16??m, which consists of an array of metal micropatches and a periodically corrugated metallic back plate sandwiching a semiconductor active layer. By exploiting the excitations of microcavity modes and hybrid spoof surface plasmons (SSPs) modes, this optical incoupler can convert infrared radiation efficiently into the quantum wells (QWs) layer of semiconductor region with large electrical field component (Ez) normal to the plane of QWs. Our further numerical simulations for optimization indicate that by tuning microcavity mode to overlap with hybrid SSPs mode in spectrum, a coupled mode is formed, which leads to 33-fold enhanced light absorption for QWs centered at wavelength of 14.5??m compared with isotropic absorption of QWs without any metallic microstructures, as well as a large value of coupling efficiency (?) of |Ez|(2)?~?6. This coupled mode shows a slight dispersion over ~40° and weak polarization dependence, which is quite beneficial to the high performance infrared photodetectors.

| S-EPMC4960657 | biostudies-literature

Solution-processed near-infrared Cu(In,Ga)(S,Se)<sub>2</sub> photodetectors with enhanced chalcopyrite crystallization and bandgap grading structure via potassium incorporation.

Project description:Although solution-processed Cu(In,Ga)(S,Se)2 (CIGS) absorber layers can potentially enable the low-cost and large-area production of highly stable electronic devices, they have rarely been applied in photodetector applications. In this work, we present a near-infrared photodetector functioning at 980 nm based on solution-processed CIGS with a potassium-induced bandgap grading structure and chalcopyrite grain growth. The incorporation of potassium in the CIGS film promotes Se uptake in the bulk of the film during the chalcogenization process, resulting in a bandgap grading structure with a wide space charge region that allows improved light absorption in the near-infrared region and charge carrier separation. Also, increasing the Se penetration in the potassium-incorporated CIGS film leads to the enhancement of chalcopyrite crystalline grain growth, increasing charge carrier mobility. Under the reverse bias condition, associated with hole tunneling from the ZnO interlayer, the increasing carrier mobility of potassium-incorporated CIGS photodetector improved photosensitivity and particularly external quantum efficiency more than 100% at low light intensity. The responsivity and detectivity of the potassium-incorporated CIGS photodetector reach 1.87 A W-1 and 6.45 [Formula: see text] 1010 Jones, respectively, and the - 3 dB bandwidth of the device extends to 10.5 kHz under 980 nm near-infrared light.

| S-EPMC8035197 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data