Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Numerical simulation study on the crack propagation of conglomerate.

ABSTRACT: The conglomerate reservoir is rich in oil and gas reserves; however, the gravel's mechanical properties and laws are difficult to gain through laboratory experiments, which furthermore constrain the hydraulic fracturing design. To analyse the failure law of conglomerate, we simulated the uniaxial compression test based on discrete element software PFC2D and analysed the effect of different cementation strength, gravel content and gravel geometry on the rock deformation and failure characteristics. Results show that (i) as the cementation strength decreases, the compressive strength and elasticity modulus both reduce clearly, while the crack shapes get more complex and the critical value is 0.3; (ii) as the gravel content increases, the conglomerate strength first decreases then increases under the influences of cracks bypassing gravels; cementation strength and gravel content of the conglomerate both contribute to the increase in local additional stress, which leads to a series of changes in crack shapes and mechanical properties of the conglomerate. Based on the above research, the conglomerate strength and crack shapes after failure are relatively complex due to the common influence of cementation strength and gravel content. The gravel edge crack caused by stress concentration is the micro-mechanism that affects the conglomerate mechanical properties.

SUBMITTER: Luo S

PROVIDER: S-EPMC8292759 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Wave Propagation of Junctional Remodeling in Collective Cell Movement of Epithelial Tissue: Numerical Simulation Study.

Project description:During animal development, epithelial cells forming a monolayer sheet move collectively to achieve the morphogenesis of epithelial tissues. One driving mechanism of such collective cell movement is junctional remodeling, which is found in the process of clockwise rotation of Drosophila male terminalia during metamorphosis. However, it still remains unknown how the motions of cells are spatiotemporally organized for collective movement by this mechanism. Since these moving cells undergo elastic deformations, the influence of junctional remodeling may mechanically propagate among them, leading to spatiotemporal pattern formations. Here, using a numerical cellular vertex model, we found that the junctional remodeling in collective cell movement exhibits spatiotemporal self-organization without requiring spatial patterns of molecular signaling activity. The junctional remodeling propagates as a wave in a specific direction with a much faster speed than that of cell movement. Such propagation occurs in both the absence and presence of fluctuations in the contraction of cell boundaries.

| S-EPMC5516087 | biostudies-literature

Crack propagation in bamboo's hierarchical cellular structure.

Project description:Bamboo, as a natural hierarchical cellular material, exhibits remarkable mechanical properties including excellent flexibility and fracture toughness. As far as bamboo as a functionally graded bio-composite is concerned, the interactions of different constituents (bamboo fibers; parenchyma cells; and vessels.) alongside their corresponding interfacial areas with a developed crack should be of high significance. Here, by using multi-scale mechanical characterizations coupled with advanced environmental electron microscopy (ESEM), we unambiguously show that fibers' interfacial areas along with parenchyma cells' boundaries were preferred routes for crack growth in both radial and longitudinal directions. Irrespective of the honeycomb structure of fibers along with cellular configuration of parenchyma ground, the hollow vessels within bamboo culm affected the crack propagation too, by crack deflection or crack-tip energy dissipation. It is expected that the tortuous crack propagation mode exhibited in the present study could be applicable to other cellular natural materials as well.

| S-EPMC4083283 | biostudies-literature

Sideways and stable crack propagation in a silicone elastomer.

Project description:We have discovered a peculiar form of fracture that occurs in a highly stretchable silicone elastomer (Smooth-On Ecoflex 00-30). Under certain conditions, cracks propagate in a direction perpendicular to the initial precut and in the direction of the applied load. In other words, the crack deviates from the standard trajectory and instead propagates perpendicular to that trajectory. The crack arrests stably, and thus the material ahead of the crack front continues to sustain load, thereby enabling enormous stretchabilities. We call this phenomenon "sideways" and stable cracking. To explain this behavior, we first perform finite-element simulations that demonstrate a propensity for sideways cracking, even in an isotropic material. The simulations also highlight the importance of crack-tip blunting on the formation of sideways cracks. Next, we provide a hypothesis on the origin of sideways cracking that relates to microstructural anisotropy (in a nominally isotropic elastomer). To substantiate this hypothesis, we transversely prestretch samples to various extents before fracture testing, as to determine the influence of microstructural arrangement (chain alignment and strain-induced crystallization) on fracture energy. We also perform microstructural characterization that indicates that significant chain alignment and strain-induced crystallization indeed occur in this material upon stretching. We conclude by characterizing how a number of loading conditions, such as sample geometry and strain rate, affect this phenomenon. Overall, this paper provides fundamental mechanical insight into basic phenomena associated with fracture of elastomers.

| S-EPMC6511042 | biostudies-literature

Protein unfolding under force: crack propagation in a network.

Project description:The mechanical unfolding of a set of 12 proteins with diverse topologies is investigated using an all-atom constraint-based model. Proteins are represented as polypeptides cross-linked by hydrogen bonds, salt bridges, and hydrophobic contacts, each modeled as a harmonic inequality constraint capable of supporting a finite load before breaking. Stereochemically acceptable unfolding pathways are generated by minimally overloading the network in an iterative fashion, analogous to crack propagation in solids. By comparing the pathways to those from molecular dynamics simulations and intermediates identified from experiment, it is demonstrated that the dominant unfolding pathways for 9 of the 12 proteins studied are well described by crack propagation in a network.

| S-EPMC3145275 | biostudies-literature

Comparative Study on Crack Initiation and Propagation of Glass under Thermal Loading.

Project description:This paper explores the fracture process based on finite element simulation. Both probabilistic and deterministic methods are employed to model crack initiation, and several commonly used criteria are utilized to predict crack growth. It is concluded that the criteria of maximum tensile stress, maximum normal stress, and maximum Mises stress, as well as the Coulomb-Mohr criterion are able to predict the initiation of the first crack. The mixed-mode criteria based on the stress intensity factor (SIF), energy release rate, and the maximum principal stress, as well as the SIF-based maximum circumferential stress criterion are suitable to predict the crack propagation.

| S-EPMC5456625 | biostudies-other

Crack initiation and propagation in sweet cherry skin: A simple chain reaction causes the crack to 'run'.

Project description:Rain cracking severely affects the commercial production of many fleshy-fruit species, including of sweet cherries. The objectives were to investigate how the gaping macroscopic cracks (macrocracks) of a rain-cracked fruit can develop from microscopic cracks in the cuticle (microcracks). Incubating fruit in deionized water is well known to cause significant macrocracking. We found that after a lag phase of 2 h, the numbers and lengths of macrocracks increased. Macrocrack number approached an asymptote at 12 h, whereas macrocrack length continued to increase. The rate of macrocrack propagation (extension at the crack tip) was initially 10.8 mm h-1 but then decreased to a near-constant 0.5 mm h-1. Light microscopy revealed three characteristic zones along a developing macrocrack. In zone I (ahead of the crack), the cuticle was intact, the epidermal cells were unbroken and their cell walls were thin. In zone II, the cuticle was fractured, the first epidermal cells died and their cell walls began to thicken (swell). In zone III, most epidermal cells had died, their cell walls were swollen and cell:cell separation began along the middle lamellae. The thickness of the anticlinal epidermal cell walls and the percentage of intact living cells along a crack were closely and negatively related. Cracks were stained by calcofluor white, but there was no binding of monoclonal antibodies (mAbs) specific for hemicelluloses (LM11, LM21, LM25). Strong binding was obtained with the anti-homogalacturonan mAb (LM19), indicating the presence of unesterified homogalacturonans on the crack surface. We conclude that macrocrack propagation is related to cell death and to cell wall swelling. Cell wall swelling weakens the cell:cell adhesion between neighbouring epidermal cells, which separate along their middle lamellae. The skin macrocrack propagates like a 'run' in a fine, knitted fabric.

| S-EPMC6668808 | biostudies-literature

Crack propagation and fracture in silicon wafers under thermal stress.

Project description:The behaviour of microcracks in silicon during thermal annealing has been studied using in situ X-ray diffraction imaging. Initial cracks are produced with an indenter at the edge of a conventional Si wafer, which was heated under temperature gradients to produce thermal stress. At temperatures where Si is still in the brittle regime, the strain may accumulate if a microcrack is pinned. If a critical value is exceeded either a new or a longer crack will be formed, which results with high probability in wafer breakage. The strain reduces most efficiently by forming (hhl) or (hkl) crack planes of high energy instead of the expected low-energy cleavage planes like {111}. Dangerous cracks, which become active during heat treatment and may shatter the whole wafer, can be identified from diffraction images simply by measuring the geometrical dimensions of the strain-related contrast around the crack tip. Once the plastic regime at higher temperature is reached, strain is reduced by generating dislocation loops and slip bands and no wafer breakage occurs. There is only a small temperature window within which crack propagation is possible during rapid annealing.

| S-EPMC3769070 | biostudies-literature

Study on the Interference Law of Staged Fracturing Crack Propagation in Horizontal Wells of Tight Reservoirs.

Project description:Horizontal well multistage fracturing technology is a high-efficiency method for tight oil and gas production, which increases the contact area between the wellbore and stratum by forming multiple transverse hydraulic fractures (HFs). The stress interference caused by the created HFs will affect the propagation geometries of the subsequent HFs, and then affect the overall fracturing treatment performance. In order to study the distribution of HFs and law of interference among multiple fractures during horizontal well multistage fracturing in tight reservoirs, in this paper, the effects of horizontal stress difference, perforation spacing, and net pressure in the created fracture on the initiation and propagation of multiple cracks were specially studied through large-scale hydraulic fracturing experiments and numerical simulation. The results showed that under high horizontal stress difference, multiple HFs with small spacing tended to coalesce at a place where the length has extended to a certain level. It was also found that the initiation pressures of HFs within subsequent stages increase with the rise of net pressure in created HFs, which causes the subsequent fractures to deviate from the direction perpendicular to the horizontal wellbore and then to gradually deflect toward it. Moreover, the ratio of fracture spacing to fracture height, and the net pressure are the key parameters to determine the deflection degree of HFs for multistage fracturing. In addition, the deflection degree of subsequent HFs was expected to enhance with the decreasing ratio of fracture spacing to fracture height and increasing net pressure in created HFs. It was useful for mitigating stress interference to lengthen the stage spacing, control the fracture height, and reduce the net pressure. The research results have a reference value for the optimal design of the fracture spacing for multistage fracturing.

| S-EPMC7226883 | biostudies-literature

Velocity mode transition of dynamic crack propagation in hyperviscoelastic materials: A continuum model study.

Project description:Experiments of crack propagation in rubbers have shown that a discontinuous jump of crack propagation velocity can occur as energy release rate increases, which is known as the "mode transition" phenomenon. Although it is believed that the mode transition is strongly related to the mechanical properties, the nature of the mode transition had not been revealed. In this study, dynamic crack propagation on an elastomer was investigated using the finite element method (FEM) with a hyperviscoelastic material model. A series of pure shear test was carried out numerically with FEM simulations and crack velocities were measured under various values of tensile strain. As a result, our FEM simulations successfully reproduced the mode transition. The success of realising the mode transition phenomenon by a simple FEM model, which was achieved for the first time ever, helped to explain that the phenomenon occurs owing to a characteristic non-monotonic temporal development of principal stress near the crack tip.

| S-EPMC5301218 | biostudies-other

Nonlinear fracture toughness measurement and crack propagation resistance of functionalized graphene multilayers.

Project description:Despite promising applications of two-dimensional (2D) materials, one major concern is their propensity to fail in a brittle manner, which results in a low fracture toughness causing reliability issues in practical applications. We show that this limitation can be overcome by using functionalized graphene multilayers with fracture toughness (J integral) as high as ~39 J/m2, measured via a microelectromechanical systems-based in situ transmission electron microscopy technique coupled with nonlinear finite element fracture analysis. The measured fracture toughness of functionalized graphene multilayers is more than two times higher than graphene (~16 J/m2). A linear fracture analysis, similar to that previously applied to other 2D materials, was also conducted and found to be inaccurate due to the nonlinear nature of the stress-strain response of functionalized graphene multilayers. A crack arresting mechanism of functionalized graphene multilayers was experimentally observed and identified as the main contributing factor for the higher fracture toughness as compared to graphene. Molecular dynamics simulations revealed that the interactions among functionalized atoms in constituent layers and distinct fracture pathways in individual layers, due to a random distribution of functionalized carbon atoms in multilayers, restrict the growth of a preexisting crack. The results inspire potential strategies for overcoming the relatively low fracture toughness of 2D materials through chemical functionalization.

| S-EPMC5889190 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data