Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Efficient and Stable Large-Area Perovskite Solar Cells with Inorganic Perovskite/Carbon Quantum Dot-Graded Heterojunction.

ABSTRACT: This work reports on a compositionally graded heterojunction for photovoltaic application by cooperating fluorine-doped carbon quantum dots (FCQDs in short) into the CsPbI_2.5Br_0.5 inorganic perovskite layer. Using this CsPbI_2.5Br_0.5/FCQDs graded heterojunction in conjunction with low-temperature-processed carbon electrode, a power conversion efficiency of 13.53% for 1 cm² all-inorganic perovskite solar cell can be achieved at AM 1.5G solar irradiation. To the best of our knowledge, this is one of the highest efficiency reported for carbon electrode based all-inorganic perovskite solar cells so far, and the first report of 1 cm² carbon counter electrode based inorganic perovskite solar cell with PCE exceeding 13%. Moreover, the inorganic perovskite/carbon quantum dot graded heterojunction photovoltaics maintained over 90% of their initial efficiency after thermal aging at 85° for 1056 hours. This conception of constructing inorganic perovskite/FCQDs graded heterojunction offers a feasible pathway to develop efficient and stable photovoltaics for scale-up and practical applications.

SUBMITTER: Sun Q

PROVIDER: S-EPMC8292841 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Stepwise-Process-Controlled Ligand Management Strategy for Efficient and Stable Perovskite Quantum Dot Solar Cells.

Project description:CsPbI3 perovskite quantum dots (QDs) have attracted much attention in the field of solar cells because of their excellent photovoltaic properties. Conventional modification of long-chain insulating ligands can ensure good dispersion and film-forming stability of QDs, but the limitations of their low defect passivation ability and poor charge transport ability will make them fail to achieve high efficiency in the corresponding solar cell devices. In this study, by introducing "Benzylphosphonic acid" short-chain ligands to the surface of CsPbI3 QDs, the ligands were re-administered on the surface during the preparation of the CsPbI3 QDs as well as during the film-forming process. The strong coordination ability of Benzenephosphonic acid can effectively passivate defects on the surface of CsPbI3 QDs and inhibit non-radiative recombination and phase transition. Meanwhile, this short-chain ligand can effectively promote the charge exchange between adjacent QDs and improve the electrical transport properties of the film. The efficiency of the Benzylphosphonic acid-modified CsPbI3 QDs solar cell reaches 13.91% compared to the unmodified device (PCE of 11.4%). The storage stability and operation stability of the device are also significantly improved. (The efficiency remains at 91% of the original for 800 h of atmospheric storage; the efficiency remains at 92% of the original for 200 h of continuous light exposure.) The present strategy realizes the simultaneous improvement of photovoltaic properties and stability of CsPbI3 QD solar cells and also provides a reference for surface ligand engineering to realize highly efficient and stable perovskite quantum dot solar cells.

| S-EPMC10708130 | biostudies-literature

Graded Heterojunction Improves Wide-Bandgap Perovskite for Highly Efficient 4-Terminal Perovskite/Silicon Tandem Solar Cells.

Project description:Wide-bandgap (WBG) perovskite solar cells (PSCs) are essential for highly efficient and stable silicon/perovskite tandem solar cells. In this study, we adopted a synthetic strategy with lead thiocyanate (Pb(SCN)2) additive and methylammonium chloride (MACl) posttreatment to enhance the crystallinity and improve the interface of WBG perovskite films with a bandgap of 1.68 eV. The excessive PbI2 was formed at grain boundaries and converted into MAPbI3-xClx perovskites, which are utilized to form the graded heterojunction (GHJ) and compressive strain. This is beneficial for passivating nonradiative recombination defects, suppressing halide phase segregation, and facilitating carrier extraction. Subsequently, the device with GHJ delivered a champion efficiency of 20.30% and superior stability in ambient air and under 85 °C. Finally, we achieved a recorded efficiency of 30.91% for 4-terminal WBG perovskite/TOPCon tandem silicon solar cells. Our findings demonstrate a promising approach for fabricating efficient and stable WBG PSCs through the formation of GHJ.

| S-EPMC10351391 | biostudies-literature

NiO/Perovskite Heterojunction Contact Engineering for Highly Efficient and Stable Perovskite Solar Cells.

Project description:Recent research shows that the interface state in perovskite solar cells is the main factor which affects the stability and performance of the device, and interface engineering including strain engineering is an effective method to solve this issue. In this work, a CsBr buffer layer is inserted between NiO x hole transport layer and perovskite layer to relieve the lattice mismatch induced interface stress and induce more ordered crystal growth. The experimental and theoretical results show that the addition of the CsBr buffer layer optimizes the interface between the perovskite absorber layer and the NiO x hole transport layer, reduces interface defects and traps, and enhances the hole extraction/transfer. The experimental results show that the power conversion efficiency of optimal device reaches up to 19.7% which is significantly higher than the efficiency of the device without the CsBr buffer layer. Meanwhile, the device stability is also improved. This work provides a deep understanding of the NiO x /perovskite interface and provides a new strategy for interface optimization.

| S-EPMC7284208 | biostudies-literature

Organic-Inorganic Perovskite Films and Efficient Planar Heterojunction Solar Cells by Magnetron Sputtering.

Project description:Organic-inorganic halide perovskites have been widely used in photovoltaic technologies. Despite tremendous progress in their efficiency and stability, perovskite solar cells (PSCs) are still facing the challenges of upscaling and stability for practical applications. As a mature film preparation technology, magnetron sputtering has been widely used to prepare metals, metallic oxides, and some semiconductor films, which has great application potential in the fabrication of PSCs. Here, a unique technology where high-quality perovskite films are prepared via magnetron sputtering for controllable composition, solvent-free, large-area, and massive production, is presented. This strategy transforms the perovskite materials from powder to thin films by magnetron sputtering and post-treatment (vapor-assisted treatment with methanaminium iodide gas and methylamine gas treatment), which is greatly favorable to manufacture tandem solar cells. The power conversion efficiency (PCE) of PSCs with perovskite films fabricated by magnetron sputtering is 6.14%. After optimization, high-performance perovskite films with excellent electronic properties are obtained and stable PSCs with excellent reproducibility are realized, showing a PCE of up to 15.22%. The entirely novel synthetic approach opens up a new and promising way to achieve high-throughput magnetron sputtering for large-area production in commercial applications of planar heterojunction and tandem PSCs.

| S-EPMC8596124 | biostudies-literature

All-inorganic quantum dot assisted enhanced charge extraction across the interfaces of bulk organo-halide perovskites for efficient and stable pin-hole free perovskite solar cells.

Project description:In spite of achieving high power conversion efficiency (PCE), organo-halide perovskites suffer from long term stability issues. Especially the grain boundaries of polycrystalline perovskite films are considered as giant trapping sites for photo-generated carriers and therefore play an important role in charge transportation dynamics. Surface engineering via grain boundary modification is the most promising way to resolve this issue. A unique antisolvent-cum-quantum dot (QD) assisted grain boundary modification approach has been employed for creating monolithically grained, pin-hole free perovskite films, wherein the choice of all-inorganic CsPbBr x I3-x (x = 1-2) QDs is significant. The grain boundary filling by QDs facilitates the formation of compact films with 1-2 ?m perovskite grains as compared to 300-500 nm grains in the unmodified films. The solar cells fabricated by CsPbBr1.5I1.5 QD modification yield a PCE of ?16.5% as compared to ?13% for the unmodified devices. X-ray photoelectron spectral analyses reveal that the sharing of electrons between the PbI6 - framework in the bulk perovskite and Br- ions in CsPbBr1.5I1.5 QDs facilitates the charge transfer process while femtosecond transient absorption spectroscopy (fs-TAS) suggests quicker trap filling and enhanced charge carrier recombination lifetime. Considerable ambient stability up to ?720 h with <20% PCE degradation firmly establishes the strategic QD modification of bulk perovskite films.

| S-EPMC6979373 | biostudies-literature

Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture.

Project description:All-inorganic CsPbI3 perovskite quantum dots have received substantial research interest for photovoltaic applications because of higher efficiency compared to solar cells using other quantum dots materials and the various exciting properties that perovskites have to offer. These quantum dot devices also exhibit good mechanical stability amongst various thin-film photovoltaic technologies. We demonstrate higher mechanical endurance of quantum dot films compared to bulk thin film and highlight the importance of further research on high-performance and flexible optoelectronic devices using nanoscale grains as an advantage. Specifically, we develop a hybrid interfacial architecture consisting of CsPbI3 quantum dot/PCBM heterojunction, enabling an energy cascade for efficient charge transfer and mechanical adhesion. The champion CsPbI3 quantum dot solar cell has an efficiency of 15.1% (stabilized power output of 14.61%), which is among the highest report to date. Building on this strategy, we further demonstrate a highest efficiency of 12.3% in flexible quantum dot photovoltaics.

| S-EPMC7817685 | biostudies-literature

Compositionally Graded Absorber for Efficient and Stable Near-Infrared-Transparent Perovskite Solar Cells.

Project description:Compositional grading has been widely exploited in highly efficient Cu(In,Ga)Se2, CdTe, GaAs, quantum dot solar cells, and this strategy has the potential to improve the performance of emerging perovskite solar cells. However, realizing and maintaining compositionally graded perovskite absorber from solution processing is challenging. Moreover, the operational stability of graded perovskite solar cells under long-term heat/light soaking has not been demonstrated. In this study, a facile partial ion-exchange approach is reported to achieve compositionally graded perovskite absorber layers. Incorporating compositional grading improves charge collection and suppresses interface recombination, enabling to fabricate near-infrared-transparent perovskite solar cells with power conversion efficiency of 16.8% in substrate configuration, and demonstrate 22.7% tandem efficiency with 3.3% absolute gain when mechanically stacked on a Cu(In,Ga)Se2 bottom cell. Non-encapsulated graded perovskite device retains over 93% of its initial efficiency after 1000 h operation at maximum power point at 60 °C under equivalent 1 sun illumination. The results open an avenue in exploring partial ion-exchange to design graded perovskite solar cells with improved efficiency and stability.

| S-EPMC5867048 | biostudies-literature

All-inorganic perovskite quantum dot light-emitting memories.

Project description:Field-induced ionic motions in all-inorganic CsPbBr3 perovskite quantum dots (QDs) strongly dictate not only their electro-optical characteristics but also the ultimate optoelectronic device performance. Here, we show that the functionality of a single Ag/CsPbBr3/ITO device can be actively switched on a sub-millisecond scale from a resistive random-access memory (RRAM) to a light-emitting electrochemical cell (LEC), or vice versa, by simply modulating its bias polarity. We then realize for the first time a fast, all-perovskite light-emitting memory (LEM) operating at 5 kHz by pairing such two identical devices in series, in which one functions as an RRAM to electrically read the encoded data while the other simultaneously as an LEC for a parallel, non-contact optical reading. We further show that the digital status of the LEM can be perceived in real time from its emission color. Our work opens up a completely new horizon for more advanced all-inorganic perovskite optoelectronic technologies.

| S-EPMC8298456 | biostudies-literature

Optically Resonant Bulk Heterojunction PbS Quantum Dot Solar Cell.

Project description:We design an optically resonant bulk heterojunction solar cell to study optoelectronic properties of nanostructured p-n junctions. The nanostructures yield strong light-matter interaction as well as distinct charge-carrier extraction behavior, which together improve the overall power conversion efficiency. We demonstrate high-resolution substrate conformal soft-imprint lithography technology in combination with state-of-the art ZnO nanoparticles to create a nanohole template in an electron transport layer. The nanoholes are infiltrated with PbS quantum dots (QDs) to form a nanopatterned depleted heterojunction. Optical simulations show that the absorption per unit volume in the cylindrical QD absorber layer is enhanced by 19.5% compared to a planar reference. This is achieved for a square array of QD nanopillars of 330 nm height and 320 nm diameter, with a pitch of 500 nm on top of a residual QD layer of 70 nm, surrounded by ZnO. Electronic simulations show that the patterning results in a current gain of 3.2 mA/cm2 and a slight gain in voltage, yielding an efficiency gain of 0.4%. Our simulations further show that the fill factor is highly sensitive to the patterned structure. This is explained by the electric field strength varying strongly across the patterned absorber. We outline a path toward further optimized optically resonant nanopattern geometries with enhanced carrier collection properties. We demonstrate a 0.74 mA/cm2 current gain for a patterned cell compared to a planar cell in experiments, owing to a much improved infrared response, as predicted by our simulations.

| S-EPMC9527793 | biostudies-literature

Highly Efficient and Stable White Light-Emitting Diodes Using Perovskite Quantum Dot Paper.

Project description:Perovskite quantum dots (PQDs) are a competitive candidate for next-generation display technologies as a result of their superior photoluminescence, narrow emission, high quantum yield, and color tunability. However, due to poor thermal resistance and instability under high energy radiation, most PQD-based white light-emitting diodes (LEDs) show only modest luminous efficiency of ≈50 lm W-1 and a short lifetime of <100 h. In this study, by incorporating cellulose nanocrystals, a new type of QD film is fabricated: CH3NH3PbBr3 PQD paper that features 91% optical absorption, intense green light emission (518 nm), and excellent stability attributed to the complexation effect between the nanocellulose and PQDs. The PQD paper is combined with red K2SiF6:Mn4+ phosphor and blue GaN LED chips to fabricate a high-performance white LED demonstrating ultrahigh luminous efficiency (124 lm W-1), wide color gamut (123% of National Television System Committee), and long operation lifetime (240 h), which paves the way for advanced lighting technology.

| S-EPMC6918104 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data