Dataset Information

Study of the influencing factors of the liquid CO2 phase change fracturing effect in coal seams.

ABSTRACT: To study the influence of different factors on the cracking effect of the liquid CO2 phase transition, the mechanics of coal rock crack extension based on liquid CO2 phase change blast loading were studied. Through the application of simulation software to analyze the influence of coal seam physical parameters (in situ stress, gas pressure, modulus of elasticity and strength of coal) and blasting parameters (fracturing pore size and peak pressure of detonation)on the effect of liquid CO2 phase change cracking, the simulation results showed that the cracking effect of liquid CO2 phase change was positively correlated with the changes in gas pressure, elastic modulus, fracture hole diameter and peak vent pressure, negatively correlated with the variation in situ stress and compressive strength, and nearly independent of the tensile strength. In addition, by using Gray correlation analysis to analyze the influence degree of six main factors on the cracking effect, the calculation results showed that the effect of blasting parameters was greater than that of physical parameters. The main controlling factor that affected the blasting effect was the peak pressure of blasting release. By conducting comparative engineering trials with different blasting parameters, the test results showed that the crack effect of the coal seam was positively correlated with the change in fracture hole diameter and peak venting pressure, which was consistent with the results obtained from the simulation. The experimental results and simulation results for the effective radius of coal seam fracturing were basically consistent, with the error between the two types of results falling below 10%. Therefore, the reliability of the blasting numerical model was verified. In summary, the research results provide theoretical guidance for applying and promoting liquid CO2 fracturing technology in coal mines.

SUBMITTER: Jia J

PROVIDER: S-EPMC8294570 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BACKGROUND:Previous studies have associated elevated mortality risk in central Appalachia with coal-mining activities, but few have explored how different non-coal factors influence the association within each county. Consequently, there is a knowledge gap in identifying effective ways to address health disparities in coal-mining counties. To specifically address this knowledge gap, this study estimated the effect of living in a coal-mining county on non-malignant respiratory diseases (NMRD) mortality, and defined this as "coal-county effect." We also investigated what factors may accentuate or attenuate the coal-county effect. METHODS:An ecological epidemiology protocol was designed to observe the characteristics of three populations and to identify the effects of coal-mining on community health. Records for seven coal-mining counties (n?=?19,692) were obtained with approvals from the Virginia Department of Health Office of Vital Statistics for the years 2005 to 2012. Also requested were records from three adjacent coal counties (n?=?10,425) to provide a geographic comparison. For a baseline comparison, records were requested for eleven tobacco-producing counties (n?=?27,800). We analyzed the association of 57,917 individual mortality records in Virginia with coal-mining county residency, county-level socioeconomic status, health access, behavioral risk factors, and coal production. The development of a two-level hierarchical model allowed the coal-county effect to vary by county-level characteristics. Wald tests detected sets of significant factors explaining the variation of impacts across counties. Furthermore, to illustrate how the model estimations help explain health disparities, two coal-mining county case studies were presented. RESULTS:The main result revealed that coal-mining county residency increased the probability of dying from NMRD. The coal-county effect was accentuated by surface coal mining, high smoking rates, decreasing health insurance coverage, and a shortage of doctors. In Virginia coal-mining regions, the average coal-county effect increased by 147% (p-value<?0.01) when one doctor per 1000 left, and the effect increased by 68% (p-value<?0.01) with a 1% reduction of health insurance rates, holding other factors fixed. CONCLUSIONS:This study showed a high mortality risk of NMRD associated with residents living in Virginia coal-mining counties. Our results also revealed the critical role of health access in reducing health disparities related to coal exposure.

Project description:Ground fissures (GF), appearing in front of dumps, are one of the most obvious and harmful geological hazards in coal mining areas. Studying preferential flow and its influencing factors in the ground fissures of dumps may provide basic scientific support for understanding the rapid movement of water and vegetation restoration and reconstruction in mining areas. Based on field surveys of ground fissures, three typical ground fissures were selected in the studied dump. The morphological characteristics of preferential flow for ground fissures were determined through field dye tracing, laboratory experiments, and image processing technology. The results indicated that the lengths of the three ground fissures ranged from 104.84 cm to 120.83 cm, and the widths ranged from 2.86 cm to 9.85 cm. All of the ground fissure area densities were less than 10%, and the proportion of ground fissure surface area was small in the dump. The maximum fissure depth was 47 cm, and the minimum was 16 cm. The ground fissure widths ranged from 0 cm to 14.98 cm, and the fissure width and fissure width-to-depth ratios decreased with increasing soil depth. The stained area was greater than 90% in the 0-5 cm soil layers of the three fissures, and water movement was dominated by matrix flow. The stained width decreased from 90 cm to 20 cm with increasing soil depth. The preferential flow was mainly concentrated on both sides of the fissure, which was distributed as a "T" shape. The preferential flow stained area ratios were 27.23%, 31.97%, and 30.73%, respectively, and these values decreased with increasing soil depth. The maximum stained depths of the preferential flow among the three fissures were different, and the maximum stained depth of GF II was significantly larger than that of GF I and GF III (P < 0.05). The stained path numbers of the three fissures ranged from 0 to 49. With increasing soil depth, the stained path number first increased and then decreased. The stained path widths of the three fissures ranged from 0 cm to 90 cm. With the increase in soil depth, the stained path width decreased. The stained area ratio was significantly positively correlated with ground fissure width, the ground fissure width-to-depth ratio, soil saturated hydraulic conductivity, soil organic matter, and sand content and was significantly negatively correlated with soil water content and clay content. The stained path number was significantly positively correlated with ground fissure width, the ground fissure width-to-depth ratio, soil saturated hydraulic conductivity and soil organic matter. The stained path width was significantly positively correlated with the ground fissure width-to-depth ratio, soil saturated hydraulic conductivity, soil organic matter and sand content and was significantly negatively correlated with clay content. Plant roots could significantly increase the stained area ratio, stained path number, and width and promote the formation and development of preferential flow.

Dataset Information

Study of the influencing factors of the liquid CO2 phase change fracturing effect in coal seams.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets