Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Conformable AlN Piezoelectric Sensors as a Non-invasive Approach for Swallowing Disorder Assessment.

ABSTRACT: Deglutition disorders (dysphagia) are common symptoms of a large number of diseases and can lead to severe deterioration of the patient's quality of life. The clinical evaluation of this problem involves an invasive screening, whose results are subjective and do not provide a precise and quantitative assessment. To overcome these issues, alternative possibilities based on wearable technologies have been proposed. We explore the use of ultrathin, compliant, and flexible piezoelectric patches that are able to convert the laryngeal movement into a well-defined electrical signal, with extremely low anatomical obstruction and high strain resolution. The sensor is based on an aluminum nitride thin film, grown on a soft Kapton substrate, integrated with an electrical charge amplifier and low-power, wireless connection to a smartphone. An ad-hoc designed laryngeal motion simulator (LMS), which is able to mimic the motions of the laryngeal prominence, was used to evaluate its performances. The physiological deglutition waveforms were then extrapolated on a healthy volunteer and compared with the sEMG (surface electromyography) of the submental muscles. Finally, different tests were conducted to assess the ability of the sensor to provide clinically relevant information. The reliability of these features permits an unbiased evaluation of the swallowing ability, paving the way to the creation of a system that is able to provide a point-of-care automatic, unobtrusive, and real-time extrapolation of the patient's swallowing quality even during normal behavior.

SUBMITTER: Natta L

PROVIDER: S-EPMC8294609 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Aerosol-jet-printed, conformable microfluidic force sensors.

Project description:Force sensors that are thin, low-cost, flexible, and compatible with commercial microelectronic chips are of great interest for use in biomedical sensing, precision surgery, and robotics. By leveraging a combination of microfluidics and capacitive sensing, we develop a thin, flexible force sensor that is conformable and robust. The sensor consists of a partially filled microfluidic channel made from a deformable material, with the channel overlaying a series of interdigitated electrodes coated with a thin, insulating polymer layer. When a force is applied to the microfluidic channel reservoir, the fluid is displaced along the channel over the electrodes, thus inducing a capacitance change proportional to the applied force. The microfluidic molds themselves are made of low-cost sacrificial materials deposited via aerosol-jet printing, which is also used to print the electrode layer. We envisage a large range of industrial and biomedical applications for this force sensor.

| S-EPMC8063179 | biostudies-literature

Doping Engineering for Optimizing Piezoelectric and Elastic Performance of AlN.

Project description:The piezoelectric and elastic properties are critical for the performance of AlN-based 5G RF filters. The improvement of the piezoelectric response in AlN is often accompanied by lattice softening, which compromises the elastic modulus and sound velocities. Optimizing both the piezoelectric and elastic properties simultaneously is both challenging and practically desirable. In this work, 117 X0.125Y0.125Al0.75N compounds were studied with the high-throughput first-principles calculation. B0.125Er0.125Al0.75N, Mg0.125Ti0.125Al0.75N, and Be0.125Ce0.125Al0.75N were found to have both high C33 (>249.592 GPa) and high e33 (>1.869 C/m2). The COMSOL Multiphysics simulation showed that most of the quality factor (Qr) values and the effective coupling coefficient (Keff2) of the resonators made with these three materials were higher than those with Sc0.25AlN with the exception of the Keff2 of Be0.125Ce0.125AlN, which was lower due to the higher permittivity. This result demonstrates that double-element doping of AlN is an effective strategy to enhance the piezoelectric strain constant without softening the lattice. A large e33 can be achieved with doping elements having d-/f- electrons and large internal atomic coordinate changes of du/dε. The doping elements-nitrogen bond with a smaller electronegativity difference (ΔEd) leads to a larger elastic constant C33.

| S-EPMC10004460 | biostudies-literature

Non-invasive quantification of human swallowing using a simple motion tracking system.

Project description:The number of patients with dysphagia is rapidly increasing due to the ageing of the population. Therefore, the importance of objectively assessing swallowing function has received increasing attention. Videofluoroscopy and videoendoscopy are the standard clinical examinations for dysphagia, but these techniques are not suitable for daily use because of their invasiveness. Here, we aimed to develop a novel, non-invasive method for measuring swallowing function using a motion tracking system, the Kinect v2 sensor. Five males and five females with normal swallowing function participated in this study. We defined three mouth-related parameters and two larynx-related parameters and recorded data from 2.5?seconds before to 2.5?seconds after swallowing onset. Changes in mouth-related parameters were observed before swallowing and reached peak values at the time of swallowing. In contrast, larynx-related parameters showed little change before swallowing and reached peak values immediately after swallowing. This simple swallow tracking system (SSTS) successfully quantified the swallowing process from the oral phase to the laryngeal phase. This SSTS is non-invasive, wireless, easy to set up, and simultaneously measures the dynamics of swallowing from the mouth to the larynx. We propose the SSTS for use as a novel and non-invasive swallowing assessment tool in the clinic.

| S-EPMC5865167 | biostudies-literature

Localizing central swallowing functions by combining non-invasive brain stimulation with neuroimaging.

Project description: Not available

| S-EPMC7494555 | biostudies-literature

A non-invasive magnetic resonance imaging approach for assessment of real-time microcirculation dynamics.

Project description:We present a novel, non-invasive magnetic resonance imaging (MRI) technique to assess real-time dynamic vasomodulation of the microvascular bed. Unlike existing perfusion imaging techniques, our method is sensitive only to blood volume and not flow velocity. Using graded gas challenges and a long-life, blood-pool T 1-reducing agent gadofosveset, we can sensitively assess microvascular volume response in the liver, kidney cortex, and paraspinal muscle to vasoactive stimuli (i.e. hypercapnia, hypoxia, and hypercapnic hypoxia). Healthy adult rats were imaged on a 3 Tesla scanner and cycled through 10-minute gas intervals to elicit vasoconstriction followed by vasodilatation. Quantitative T 1 relaxation time mapping was performed dynamically; heart rate and blood oxygen saturation were continuously monitored. Laser Doppler perfusion measurements confirmed MRI findings: dynamic changes in T 1 corresponded with perfusion changes to graded gas challenges. Our new technique uncovered differential microvascular response to gas stimuli in different organs: for example, mild hypercapnia vasodilates the kidney cortex but constricts muscle vasculature. Finally, we present a gas challenge protocol that produces a consistent vasoactive response and can be used to assess vasomodulatory capacity. Our imaging approach to monitor real-time vasomodulation may be extended to other imaging modalities and is valuable for investigating diseases where microvascular health is compromised.

| S-EPMC5547069 | biostudies-other

Integrated Piezoelectric AlN Thin Film with SU-8/PDMS Supporting Layer for Flexible Sensor Array.

Project description:This research focuses on the development of a flexible tactile sensor array consisting of aluminum nitride (AlN) based on micro-electro-mechanical system (MEMS) technology. A total of 2304 tactile sensors were integrated into a small area of 2.5 × 2.5 cm2. Five hundred nm thick AlN film with strong c-axis texture was sputtered on Cr/Au/Cr (50/50/5 nm) layers as the sacrificial layer coated on a Si wafer. To achieve device flexibility, polydimethylsiloxane (PDMS) polymer and SU-8 photoresist layer were used as the supporting layers after etching away a release layer. Twenty-five mM (3-mercaptopropyl) trimethoxysilane (MPTMS) improves the adhesion between metal and polymers due to formation of a self-assembled monolayer (SAM) on the surface of the top electrode. The flexible tactile sensor has 8 × 8 channels and each channel has 36 sensor elements with nine SU-8 bump blocks. The tactile sensor array was demonstrated to be flexible by bending 90 degrees. The tactile sensor array was demonstrated to show clear spatial resolution through detecting the distinct electrical response of each channel under local mechanical stimulus.

| S-EPMC6982933 | biostudies-literature

Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate.

Project description:Epidermal electronic systems (EESs) are skin-like electronic systems, which can be used to measure several physiological parameters from the skin. This paper presents materials and a simple, straightforward fabrication process for skin-conformable inkjet-printed temperature sensors. Epidermal temperature sensors are already presented in some studies, but they are mainly fabricated using traditional photolithography processes. These traditional fabrication routes have several processing steps and they create a substantial amount of material waste. Hence utilizing printing processes, the EES may become attractive for disposable systems by decreasing the manufacturing costs and reducing the wasted materials. In this study, the sensors are fabricated with inkjet-printed graphene/PEDOT:PSS ink and the printing is done on top of a skin-conformable polyurethane plaster (adhesive bandage). Sensor characterization was conducted both in inert and ambient atmosphere and the graphene/PEDOT:PSS temperature sensors (thermistors) were able reach higher than 0.06% per degree Celsius sensitivity in an optimal environment exhibiting negative temperature dependence.

| S-EPMC5082757 | biostudies-literature

Piezoelectric-AlN resonators at two-dimensional flexural modes for the density and viscosity decoupled determination of liquids.

Project description:A micromachined resonator immersed in liquid provides valuable resonance parameters for determining the fluidic parameters. However, the liquid operating environment poses a challenge to maintaining a fine sensing performance, particularly through electrical characterization. This paper presents a piezoelectric micromachined cantilever with a stepped shape for liquid monitoring purposes. Multiple modes of the proposed cantilever are available with full electrical characterization for realizing self-actuated and self-sensing capabilities. The focus is on higher flexural resonances, which nonconventionally feature two-dimensional vibration modes. Modal analyses are conducted for the developed cantilever under flexural vibrations at different orders. Modeling explains not only the basic length-dominant mode but also higher modes that simultaneously depend on the length and width of the cantilever. This study determines that the analytical predictions for resonant frequency in liquid media exhibit good agreement with the experimental results. Furthermore, the experiments on cantilever resonators are performed in various test liquids, demonstrating that higher-order flexural modes allow for the decoupled measurements of density and viscosity. The measurement differences achieve 0.39% in density and 3.50% in viscosity, and the frequency instability is below 0.05‰. On the basis of these results, design guidelines for piezoelectric higher-mode resonators are proposed for liquid sensing.

| S-EPMC8976841 | biostudies-literature

Novel AlN/Pt/ZnO Electrode for High Temperature SAW Sensors.

Project description:In order to develop a film electrode for the surface acoustic wave (SAW) devices working in high temperature, harsh environments, novel AlN/Pt/ZnO multilayers were prepared using pulsed laser deposition (PLD) systems on langasite (LGS) substrates. The AlN film was used as a protective layer and the ZnO buffer layer was introduced to improve the crystal quality of Pt films. The results show that the resistances of Pt and AlN/Pt film electrodes violently increase above 600 °C and 800 °C, respectively, while the resistances of AlN/Pt/ZnO electrodes have more stable electrical resistance from room temperature to 1000 °C. The AlN/Pt/ZnO electrode, where the ZnO film was deposited at 600 °C, has the best temperature stability and can steadily work for 4 h at 1000 °C. The mechanism underlying the stable resistance of the AlN/Pt/ZnO electrode at a high temperature was investigated by analyzing the microstructure of the prepared samples. The proposed AlN/Pt/ZnO film electrode has great potential for applications in high temperature SAW sensors.

| S-EPMC5344621 | biostudies-other

Continuous Three-Dimensional Printing of Architected Piezoelectric Sensors in Minutes

Project description:Additive manufacturing (AM), also known as three-dimensional (3D) printing, is thriving as an effective and robust method in fabricating architected piezoelectric structures, yet most of the commonly adopted printing techniques often face the inherent speed-accuracy trade-off, limiting their speed in manufacturing sophisticated parts containing micro-/nanoscale features. Herein, stabilized, photo-curable resins comprising chemically functionalized piezoelectric nanoparticles (PiezoNPs) were formulated, from which microscale architected 3D piezoelectric structures were printed continuously via micro continuous liquid interface production (μCLIP) at speeds of up to ~60 μm s−1, which are more than 10 times faster than the previously reported stereolithography-based works. The 3D-printed functionalized barium titanate (f-BTO) composites reveal a bulk piezoelectric charge constant d33 of 27.70 pC N−1 with the 30 wt% f-BTO. Moreover, rationally designed lattice structures that manifested enhanced, tailorable piezoelectric sensing performance as well as mechanical flexibility were tested and explored in diverse flexible and wearable self-powered sensing applications, e.g., motion recognition and respiratory monitoring.

| S-EPMC9318352 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data