Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Novel AlN/Pt/ZnO Electrode for High Temperature SAW Sensors.

ABSTRACT: In order to develop a film electrode for the surface acoustic wave (SAW) devices working in high temperature, harsh environments, novel AlN/Pt/ZnO multilayers were prepared using pulsed laser deposition (PLD) systems on langasite (LGS) substrates. The AlN film was used as a protective layer and the ZnO buffer layer was introduced to improve the crystal quality of Pt films. The results show that the resistances of Pt and AlN/Pt film electrodes violently increase above 600 °C and 800 °C, respectively, while the resistances of AlN/Pt/ZnO electrodes have more stable electrical resistance from room temperature to 1000 °C. The AlN/Pt/ZnO electrode, where the ZnO film was deposited at 600 °C, has the best temperature stability and can steadily work for 4 h at 1000 °C. The mechanism underlying the stable resistance of the AlN/Pt/ZnO electrode at a high temperature was investigated by analyzing the microstructure of the prepared samples. The proposed AlN/Pt/ZnO film electrode has great potential for applications in high temperature SAW sensors.

SUBMITTER: Liu X

PROVIDER: S-EPMC5344621 | biostudies-other | 2017 Jan

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High-temperature resistive gas sensors based on ZnO/SiC nanocomposites.

Project description:Increasing requirements for environmental protection have led to the need for the development of control systems for exhaust gases monitored directly at high temperatures in the range of 300-800 °C. The development of high-temperature gas sensors requires the creation of new materials that are stable under these conditions. The stability of nanostructured semiconductor oxides at high temperature can be enhanced by creating composites with highly dispersed silicon carbide (SiC). In this work, ZnO and SiC nanofibers were synthesized by electrospinning of polymer solutions followed by heat treatment, which is necessary for polymer removal and crystallization of semiconductor materials. ZnO/SiC nanocomposites (15-45 mol % SiC) were obtained by mixing the components in a single homogeneous paste with subsequent thermal annealing. The composition and microstructure of the materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The electrophysical and gas sensing properties of the materials were investigated by in situ conductivity measurements in the presence of the reducing gases CO and NH3 (20 ppm), in dry conditions (relative humidity at 25 °C RH25 = 0) and in humid air (RH25 = 30%) in the temperature range 400-550 °C. The ZnO/SiC nanocomposites were characterized by a higher concentration of chemisorbed oxygen, higher activation energy of conductivity, and higher sensor response towards CO and NH3 as compared with ZnO nanofibers. The obtained experimental results were interpreted in terms of the formation of an n-n heterojunction at the ZnO/SiC interface.

| S-EPMC6664407 | biostudies-literature

Measuring Torque and Temperature in a Rotating Shaft Using Commercial SAW Sensors.

Project description:Real-time monitoring of torque in a rotating shaft is not easy to implement with technologies such as optic fiber sensors or strain gages. Surface acoustic wave (SAW) sensors are wireless and passive and can be used to monitor strain in moving parts. Commercial solutions (sensors, antennas and interrogation unit) can easily be purchased from some companies; however, they are not customized and may not meet the specificity of the measurements. In order to evaluate the adequacy of commercial off-the-shelf (COTS) solutions, temperature and strain sensors fabricated by SENSeOR (Besançon, France) were mounted on a load cell. The sensors were calibrated using a thermal chamber and a universal testing machine. The load cell was then assembled together with a steel shaft that rotated at different speeds inside an oven. The commercial antennas were replaced with an RF (radio frequency) coupler and the sensors were interrogated with the commercial interrogation unit. The influence of rotation in the accuracy on the measurements, as well as the adequacy of the sensors structure, was evaluated. It can be concluded that SAW sensors can be used to measure temperature or torque in a rotating environment; however, some customization of the components is required in order to overcome the limitations posed by COTS sensing solutions.

| S-EPMC5539725 | biostudies-other

Tungsten as a Chemically-Stable Electrode Material on Ga-Containing Piezoelectric Substrates Langasite and Catangasite for High-Temperature SAW Devices.

Project description:Thin films of tungsten on piezoelectric substrates La₃Ga₅SiO14 (LGS) and Ca₃TaGa₃Si₂O14 (CTGS) have been investigated as a potential new electrode material for interdigital transducers for surface acoustic wave-based sensor devices operating at high temperatures up to 800 °C under vacuum conditions. Although LGS is considered to be suitable for high-temperature applications, it undergoes chemical and structural transformation upon vacuum annealing due to diffusion of gallium and oxygen. This can alter the device properties depending on the electrode nature, the annealing temperature, and the duration of the application. Our studies present evidence for the chemical stability of W on these substrates against the diffusion of Ga/O from the substrate into the film, even upon annealing up to 800 °C under vacuum conditions using Auger electron spectroscopy and energy-dispersive X-ray spectroscopy, along with local studies using transmission electron microscopy. Additionally, the use of CTGS as a more stable substrate for such applications is indicated.

| S-EPMC5456496 | biostudies-other

Design of high-sensitivity La-doped ZnO sensors for CO<sub>2</sub> gas detection at room temperature.

Project description:For the sake of people's health and the safety of the environment, more efforts should be directed towards the fabrication of gas sensors that can operate effectively at room temperature (RT). In this context, increased attention has been paid to developing gas sensors based on rare-earth (RE)-doped transparent conducting oxides (TCO). In this report, lanthanum-doped zinc oxide (La-doped ZnO) films were fabricated by sol-gel and spin-coating techniques. XRD analysis revealed the hexagonal structure of the ZnO films, with preferred growth along the (002) direction. The crystallite size was decreased from 33.21 to 26.41 nm with increasing La content to 4.0 at.%. The UV-vis-NIR indicating that the films are highly transparent (˃ 80%), La-doping increased the UV blocking ability of the films and narrowed the optical band gap (Eg) from 3.275 to 3.125 eV. Additionally, La-doping has influenced the refractive index of the samples. Gas sensing measurements were performed at ambient temperature (30 °C) and a relative humidity (RH) of 30%, employing different flow rates of carbon dioxide (CO2) gas used synthetically with air. Among the evaluated sensors, the ZnO: 4.0 at.% La sensor exhibited the most significant gas response, with a value of 114.22%. This response was observed when the sensor was subjected to a flow rate of 200 SCCM of CO2 gas. Additionally, the sensor revealed a response time of 24.4 s and a recovery time of 44 s. The exceptional performance exhibited by the sensor makes it very appropriate for a wide range of industrial applications. Additionally, we assessed the effect of humidity, selectivity, reusability, repeatability, detection limit, and limit of quantification.

| S-EPMC10603051 | biostudies-literature

High-quality AlN grown with a single substrate temperature below 1200 °C.

Project description:1.5-?m AlN grown by metal-organic chemical vapor deposition (MOCVD), with a single substrate temperature of 1180?°C, exhibits atomically flat surface and the XRD (102) peak width of 427?arcsec. The results are achieved with a pulsed NH3-flow condition, serving as an alternative for the commonly used temperature-varied buffer structure, which is often complicated and time-consuming. Inserting two pulsed-NH3-flow AlN layers in the epitaxial structure not only releases the lattice strain via the formation of three-dimensional nano-islands, but also smoothens the surface with prolonged lateral migration of Al adatoms. This effective growth technique substantially simplifies the manufacture of device-quality AlN.

| S-EPMC5541044 | biostudies-literature

High-performance gas sensors with temperature measurement.

Project description:There are a number of gas ionization sensors using carbon nanotubes as cathode or anode. Unfortunately, their applications are greatly limited by their multi-valued sensitivity, one output value corresponding to several measured concentration values. Here we describe a triple-electrode structure featuring two electric fields with opposite directions, which enable us to overcome the multi-valued sensitivity problem at 1 atm in a wide range of gas concentrations. We used a carbon nanotube array as the first electrode, and the two electric fields between the upper and the lower interelectrode gaps were designed to extract positive ions generated in the upper gap, hence significantly reduced positive ion bombardment on the nanotube electrode, which allowed us to maintain a high electric field near the nanotube tips, leading to a single-valued sensitivity and a long nanotube life. We have demonstrated detection of various gases and simultaneously monitoring temperature, and a potential for applications.

| S-EPMC3569919 | biostudies-literature

Twofold Porosity and Surface Functionalization Effect on Pt-Porous GaN for High-Performance H<sub>2</sub>-Gas Sensors at Room Temperature.

Project description:The achievement of H2 detection, up to 25 ppm, at room temperature using sulfur-treated, platinum (Pt)-decorated porous GaN is reported in this study. This achievement is attributed to the large lateral pore size, Pt catalyst, and surface treatment using organic sulfide. The performance of H2-gas sensors is studied as a function of the operating temperature by providing an adsorption activation energy of 22 meV at 30 ppm H2, confirming the higher sensitivity of the sulfide-treated Pt-porous GaN sensor. Furthermore, the sensing response of the sulfide-treated Pt-porous GaN gas sensor increases with the increase in porosity (surface-to-volume ratio) and pore radii. Using the Knudsen diffusion-surface reaction equation, the H2 gas concentration profile is simulated and fitted within the porous GaN layer, revealing that H2 diffusion is limited by small pore radii because of its low diffusion rate. The simulated gas sensor responses to H2 versus the pore diameter show the same trend as observed for the experimental data. The sulfide-treated Pt-porous GaN sensor achieves ultrasensitive H2 detection at room temperature for 125 nm pore radii.

| S-EPMC6648823 | biostudies-literature

High Temperature AlGaN/GaN Membrane Based Pressure Sensors.

Project description:A highly sensitive Gallium Nitride (GaN) diaphragm based micro-scale pressure sensor with an AlGaN/GaN heterostructure field effect transistor (HFET) deflection transducer has been designed and fabricated for high temperature applications. The performance of the pressure sensor was studied over a pressure range of 20 kPa, which resulted in an ultra-high sensitivity of ~0.76%/kPa, with a signal-to-noise ratio as high as 16 dB, when biased optimally in the subthreshold region. A high gauge factor of 260 was determined from strain distribution in the sensor membrane obtained from finite element simulations. A repeatable sensor performance was observed over multiple pressure cycles up to a temperature of 200 °C.

| S-EPMC6187712 | biostudies-literature

Ga2O3(Sn) Oxides for High-Temperature Gas Sensors.

Project description:Gallium(III) oxide is a promising functional wide-gap semiconductor for high temperature gas sensors of the resistive type. Doping of Ga2O3 with tin improves material conductivity and leads to the complicated influence on phase content, microstructure, adsorption sites, donor centers and, as a result, gas sensor properties. In this work, Ga2O3 and Ga2O3(Sn) samples with tin content of 0-13 at.% prepared by aqueous co-precipitation method were investigated by X-ray diffraction, nitrogen adsorption isotherms, X-ray photoelectron spectroscopy, infrared spectroscopy and probe molecule techniques. The introduction of tin leads to a decrease in the average crystallite size, increase in the temperature of β-Ga2O3 formation. The sensor responses of all Ga2O3(Sn) samples to CO and NH3 have non-monotonous character depending on Sn content due to the following factors: the formation of donor centers and the change of free electron concentration, increase in reactive chemisorbed oxygen ions concentration, formation of metastable Ga2O3 phases and segregation of SnO2 on the surface of Ga2O3(Sn) grains.

| S-EPMC8624813 | biostudies-literature

Simulation/Experiment Confrontation, an Efficient Approach for Sensitive SAW Sensors Design.

Project description:Sensitivity is one of the most important parameters to put in the foreground in all sensing applications. Its increase is therefore an ongoing challenge, particularly for surface acoustic wave (SAW) sensors. Herein, finite element method (FEM) simulation using COMSOL Multiphysics software is first used to simulate the physical and electrical properties of SAW delay line. Results indicate that 2D configuration permits to accurately obtain all pertinent parameters, as in 3D simulation, with very substantial time saving. A good agreement between calculation and experiment, in terms of transfer functions (S21 spectra), was also shown to evaluate the dependence of the SAW sensors sensitivity on the operating frequency; 2D simulations have been conducted on 104 MHz and 208 MHz delay lines, coated with a polyisobutylene (PIB) as sensitive layer to dichloromethane (DCM). A fourfold increase in sensitivity was obtained by doubling frequency. Both sensors were then realized and tested as chem-sensors to detect zinc ions in liquid media. 9-{[4-({[4-(9anthrylmethoxy)phenyl]sulfanyl} methyl)]methyl] anthracene (TDP-AN) was selected as the sensing layer. Results show a comparable response curves for both designed sensors, in terms of limit of detection and dissociation constants Kd values. On the other hand, experimental sensitivity values were of the order of [7.0 ± 2.8] × 108 [°/M] and [16.0 ± 7.6] × 108 [°/M] for 104 MHz and 208 MHz sensors, respectively, confirming that the sensitivity increases with frequency.

| S-EPMC7506909 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data