Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Homogeneous Catalysis and Heterogeneous Recycling: A Simple Zn(II) Catalyst for Green Fatty Acid Esterification.

ABSTRACT: This work describes the use of simple zinc(II) salts (ZnCl₂, ZnCO₃, Zn(OAc)₂, ZnO, Zn(ClO₄)₂, Zn(TfO)₂, and Zn(BF₄)₂) as effective catalysts for the esterification of fatty acids with long-chain alcohols and simple polyols through a homogeneous system that allows the gradual and selective removal of water. The results show that the catalytic activity depends on the nature of the counterion: the most effective are the salts with poorly coordinating anions (perchlorate and triflate) or containing basic Brønsted anions (oxide, acetate, and carbonate). However, only with the latter is it possible to fully recover the catalyst at the end of each run, which is easily filtered in the form of zinc carboxylate, given its insolubility in the ester produced. In this way, it is possible to recycle the catalyst numerous times, without any loss of activity. This beneficial prerogative couples the efficiency of the homogeneous catalysis with the advantage of the heterogeneous catalysis. The process is, therefore, truly sustainable, given its high efficiency, low energy consumption, ease of purification, and the absence of auxiliary substances and byproducts.

SUBMITTER: Melchiorre M

PROVIDER: S-EPMC8297397 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Autonomous Reaction Network Exploration in Homogeneous and Heterogeneous Catalysis.

Project description:Autonomous computations that rely on automated reaction network elucidation algorithms may pave the way to make computational catalysis on a par with experimental research in the field. Several advantages of this approach are key to catalysis: (i) automation allows one to consider orders of magnitude more structures in a systematic and open-ended fashion than what would be accessible by manual inspection. Eventually, full resolution in terms of structural varieties and conformations as well as with respect to the type and number of potentially important elementary reaction steps (including decomposition reactions that determine turnover numbers) may be achieved. (ii) Fast electronic structure methods with uncertainty quantification warrant high efficiency and reliability in order to not only deliver results quickly, but also to allow for predictive work. (iii) A high degree of autonomy reduces the amount of manual human work, processing errors, and human bias. Although being inherently unbiased, it is still steerable with respect to specific regions of an emerging network and with respect to the addition of new reactant species. This allows for a high fidelity of the formalization of some catalytic process and for surprising in silico discoveries. In this work, we first review the state of the art in computational catalysis to embed autonomous explorations into the general field from which it draws its ingredients. We then elaborate on the specific conceptual issues that arise in the context of autonomous computational procedures, some of which we discuss at an example catalytic system.Graphical abstractSupplementary informationThe online version contains supplementary material available at 10.1007/s11244-021-01543-9.

| S-EPMC8816766 | biostudies-literature

Titanium dioxide as a catalyst support in heterogeneous catalysis.

Project description:The lack of stability is a challenge for most heterogeneous catalysts. During operations, the agglomeration of particles may block the active sites of the catalyst, which is believed to contribute to its instability. Recently, titanium oxide (TiO2) was introduced as an alternative support material for heterogeneous catalyst due to the effect of its high surface area stabilizing the catalysts in its mesoporous structure. TiO2 supported metal catalysts have attracted interest due to TiO2 nanoparticles high activity for various reduction and oxidation reactions at low pressures and temperatures. Furthermore, TiO2 was found to be a good metal oxide catalyst support due to the strong metal support interaction, chemical stability, and acid-base property. The aforementioned properties make heterogeneous TiO2 supported catalysts show a high potential in photocatalyst-related applications, electrodes for wet solar cells, synthesis of fine chemicals, and others. This review focuses on TiO2 as a support material for heterogeneous catalysts and its potential applications.

| S-EPMC4213406 | biostudies-other

Combining Zn Ion Catalysis with Homogeneous Gold Catalysis: An Efficient Annulation Approach to N-Protected Indoles.

Project description:The Fischer indole synthesis is perhaps the most powerful method for indole preparation, but it often suffers from low regioselectivities with unsymmetric aliphatic ketone substrates and strong acidic conditions and is not suitable for ?,?-unsaturated ketones. In this article, we disclose an efficient synthesis of N-protected indoles from N-arylhydroxamic acids/N-aryl-N-hydroxycarbamates and a variety of alkynes via a cooperative gold and zinc catalysis. The zinc catalysis is similar to the related zinc ion catalysis in metalloenzymes such as human carbonic anhydrase II and substantially enhances the O-nucleophilicity of N-acylated hydroxamines by forming the corresponding Zn chelates. The Zn chelates can attack gold-activated alkynes to form O-alkenyl-N-arylhydroxamates, which can undergo facile 3,3-sigmatropic rearrangements and subsequent cyclodehydrations to yield N-protected indole products. This new chemistry offers several important improvements over the Fischer indole synthesis: a) the reaction conditions are mildly acidic and can tolerate sensitive groups such as Boc; b) broader substrate scopes including substrates with pendant carbonyl groups (reactive in the Fischer chemistry) and alkyl chlorides (e.g., 3f); c) better regioselectivities for the formation of 2-substituted indoles under much milder conditions; d) 2-alkenylindoles can be prepared readily in good to excellent yields, but the Fischer chemistry could not; e) with internal alkynes both steric and electronic controls are available for achieving good regioselectivities, while the Fischer chemistry is in general problematic.

| S-EPMC3826563 | biostudies-literature

Crossing the divide between homogeneous and heterogeneous catalysis in water oxidation.

Project description:Enhancing the surface binding stability of chromophores, catalysts, and chromophore-catalyst assemblies attached to metal oxide surfaces is an important element in furthering the development of dye sensitized solar cells, photoelectrosynthesis cells, and interfacial molecular catalysis. Phosphonate-derivatized catalysts and molecular assemblies provide a basis for sustained water oxidation on these surfaces in acidic solution but are unstable toward hydrolysis and loss from surfaces as the pH is increased. Here, we report enhanced surface binding stability of a phosphonate-derivatized water oxidation catalyst over a wide pH range (1-12) by atomic layer deposition of an overlayer of TiO2. Increased stability of surface binding, and the reactivity of the bound catalyst, provides a hybrid approach to heterogeneous catalysis combining the advantages of systematic modifications possible by chemical synthesis with heterogeneous reactivity. For the surface-stabilized catalyst, greatly enhanced rates of water oxidation are observed upon addition of buffer bases -H2PO(-)(4)/HPO(2-)(4), B(OH)3/B(OH)2 O-, HPO(2-)4 /PO(3-)(4) - and with a pathway identified in which O-atom transfer to OH(-) occurs with a rate constant increase of 10(6) compared to water oxidation in acid.

| S-EPMC3876227 | biostudies-literature

Asymmetric Full Saturation of Vinylarenes with Cooperative Homogeneous and Heterogeneous Rhodium Catalysis.

Project description:Homogeneous and heterogeneous catalyzed reactions can seldom operate synergistically under the same conditions. Here we communicate the use of a single rhodium precursor that acts in both the homogeneous and heterogeneous phases for the asymmetric full saturation of vinylarenes that, to date, constitute an unmet bottleneck in the field. A simple asymmetric hydrogenation of a styrenic olefin, enabled by a ligand accelerated effect, accounted for the facial selectivity in the consecutive arene hydrogenation. Tuning the ratio between the phosphine ligand and the rhodium precursor controlled the formation of homogeneous and heterogeneous catalytic species that operate without interference from each other. The system is flexible in terms of both the chiral ligand and the nature of the external olefin. We anticipate that our findings will promote the development of asymmetric arene hydrogenations.

| S-EPMC8662739 | biostudies-literature

A recyclable heterogeneous-homogeneous-heterogeneous NiO/AlOOH catalysis system for hydrocarboxylation of acetylene to acrylic acid.

Project description:Concerns about the high-valued utilization of coal- and natural gas-based acetylene has provided particular impetus for exploration of acrylic acid (AA) production via one-step hydrocarboxylation reaction. Motivated by simple recovery, recycling and reuse of the catalyst, we report a high-performance NiO/AlOOH catalyst with AA space-time-yield of 412 gAA gcat. -1 h-1, obtainable by a simple incipient wetness impregnation method. Detailed kinetic and controlled experiments confirmed that nickel species on such a solid catalyst provide a heterogeneous-homogeneous-heterogeneous catalytic cycle where the chelates formed between CO and leached nickel act as the active species. The thorough recovery of leached nickel species improves the catalyst stability greatly. These preliminary findings indicate further prospects for new heterogeneous catalyst design in traditional homogeneous catalytic systems.

| S-EPMC9048467 | biostudies-literature

Construction of a Keggin heteropolyacid/Ni-MOF catalyst for esterification of fatty acids.

Project description:This work reports the one-pot solvothermal synthesis of a Keggin heteropolyacid (phosphomolybdic acid, tungstophosphoric acid, or silicotungstic acid) immobilized on Ni-MOF composite catalysts for esterification of fatty acids, and the composites were further analyzed by XRD, FTIR, NH3-TPD, SEM, TEM, N2 adsorption/desorption, and XPS. Among the contrastive syntheses (i.e., HPW/Ni-MOF, HSiW/Ni-MOF, and HPMo/Ni-MOF), HPMo/Ni-MOF exhibits the most active catalyst toward fatty acids esterification, and the characterization results also revealed that HPMo/Ni-MOF has a strong acidity, large specific surface area, and appropriate average pore size. More significantly, this catalyst exhibits a good catalytic performance (86.1% conversion) during esterification under the optimized reaction conditions, and the HPMo/Ni-MOF catalyst can remain stable after the tenth cycle with a conversion of 73.5%. Intriguingly, the esterification reaction kinetics was studied, and the activation energy was found to be 64.6 kJ mol-1. The results indicated that the esterification of fatty acids using the HPMo/Ni-MOF catalyst is a chemically controlled reaction.

| S-EPMC9042312 | biostudies-literature

Bridging the Homogeneous-Heterogeneous Divide: Modeling Spin for Reactivity in Single Atom Catalysis.

Project description:Single atom catalysts (SACs) are emergent catalytic materials that have the promise of merging the scalability of heterogeneous catalysts with the high activity and atom economy of homogeneous catalysts. Computational, first-principles modeling can provide essential insight into SAC mechanism and active site configuration, where the sub-nm-scale environment can challenge even the highest-resolution experimental spectroscopic techniques. Nevertheless, the very properties that make SACs attractive in catalysis, such as localized d electrons of the isolated transition metal center, make them challenging to study with conventional computational modeling using density functional theory (DFT). For example, Fe/N-doped graphitic SACs have exhibited spin-state dependent reactivity that remains poorly understood. However, spin-state ordering in DFT is very sensitive to the nature of the functional approximation chosen. In this work, we develop accurate benchmarks from correlated wavefunction theory (WFT) for relevant octahedral complexes. We use those benchmarks to evaluate optimal DFT functional choice for predicting spin state ordering in small octahedral complexes as well as models of pyridinic and pyrrolic nitrogen environments expected in larger SACs. Using these guidelines, we determine Fe/N-doped graphene SAC model properties and reactivity as well as their sensitivities to DFT functional choice. Finally, we conclude with broad recommendations for computational modeling of open-shell transition metal single-atom catalysts.

| S-EPMC6476907 | biostudies-literature

Glass surface as strong base, 'green' heterogeneous catalyst and degradation reagent.

Project description:Systematic screening of accelerated chemical reactions at solid/solution interfaces has been carried out in high-throughput fashion using desorption electrospray ionization mass spectrometry and it provides evidence that glass surfaces accelerate various base-catalyzed chemical reactions. The reaction types include elimination, solvolysis, condensation and oxidation, whether or not the substrates are pre-charged. In a detailed mechanistic study, we provide evidence using nanoESI showing that glass surfaces can act as strong bases and convert protic solvents into their conjugate bases which then act as bases/nucleophiles when participating in chemical reactions. In aprotic solvents such as acetonitrile, glass surfaces act as 'green' heterogeneous catalysts that can be recovered and reused after simple rinsing. Besides their use in organic reaction catalysis, glass surfaces are also found to act as degradation reagents for phospholipids with increasing extents of degradation occurring at low concentrations. This finding suggests that the storage of base/nucleophile-labile compounds or lipids in glass containers should be avoided.

| S-EPMC8294000 | biostudies-literature

Electrochemical recycling of homogeneous catalysts.

Project description:Homogeneous catalysts have rapid kinetics and keen reaction selectivity. However, their widespread use for industrial catalysis has remained limited because of challenges in reusability. Here, we propose a redox-mediated electrochemical approach for catalyst recycling using metallopolymer-functionalized electrodes for binding and release. The redox platform was investigated for the separation of key platinum and palladium homogeneous catalysts used in organic synthesis and industrial chemical manufacturing. Noble metal catalysts for hydrosilylation, silane etherification, Suzuki cross-coupling, and Wacker oxidation were recycled electrochemically. The redox electrodes demonstrated high sorption uptake for platinum-based catalysts (Qmax up to 200 milligrams of platinum per gram of adsorbent) from product mixtures, with up to 99.5% recovery, while retaining full catalytic activity over multiple cycles. The combination of mechanistic studies and electronic structure calculations indicate that selective interactions with anionic intermediates during the catalytic cycle played a key role in the separations. Last, continuous flow cell studies support the scalability and favorable technoeconomics of electrochemical recycling.

| S-EPMC9581474 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data