Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Structure and dielectric properties of (1-x)Bi_0.5Na_0.5TiO_3-xBaTiO₃ piezoceramics prepared using hydrothermally synthesized powders.

ABSTRACT: The influence of different processing parameters and various Ba²⁺ addition (up to 10 mol%) on the structure and dielectric properties of Bi_0.5Na_0.5TiO₃-BaTiO₃ (BNT-BT) ceramics was investigated. The powders were hydrothermally synthesized in the alkaline environment at 180°C for different time periods. X-ray diffraction confirmed the presence of dominant rhombohedral Bi_0.5Na_0.5TiO₃ phase and a small amount of secondary pyrochlore Bi₂Ti₂O₇ phase in the pure BNT powders. In addition, one-dimensional Na₂Ti₂O₇ structure was also observed in the powder hydrothermally treated for a long time (i.e. 48 h). The amount of secondary pyrochlore phase in the BNT-BT powders increases with the increase of Ba²⁺ content. The synthesized powders were pressed into pellets and finally sintered at various temperatures up to 1150°C. High density (more than 90%TD) was obtained in all BNT-BT sintered samples. Optimal sintering parameters were chosen in order to obtain dense ceramics with the optimal phase composition. The temperature dependence of dielectric properties for the BNT-BT ceramics was also studied. Relaxor behaviour of BNT-based ceramics and broad transition peaks are evident in all samples. Dielectric constant up to 400 as well as an acceptable low dielectric loss at temperatures lower than 200°C were obtained in BNT-BT ceramics.

SUBMITTER: Nesterovic A

PROVIDER: S-EPMC8316791 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

TiOxNy Modified TiO2 Powders Prepared by Plasma Enhanced Atomic Layer Deposition for Highly Visible Light Photocatalysis.

Project description:In this work, TiN film deposited by plasma enhanced atomic layer deposition (PEALD) is adopted to modify the commercial anatase TiO2 powders. A series of analyses indicate that the surface modification of 20, 50 and 100 cycles of TiN by PEALD does not change the morphology, crystal size, lattice parameters, and surface area of TiO2 nano powders, but forms an ultrathin amorphous layer of nitrogen doped TiO2 (TiOxNy) on the powder surfaces. This ultrathin TiOxNy can facilitate the absorption of TiO2 in visible light spectrum. As a result, TiOxNy coated TiO2 powders exhibit excellent photocatalytic degradation towards methyl orange under the visible light with good photocatalytic stability compared to pristine TiO2 powders. TiOxNy (100 cycles PEALD TiN) coated TiO2 powders exhibit the excellent photocatalytic activity with the degradation efficiency of 96.5% in 2?hours, much higher than that of pristine TiO2 powder of only 4.4%. These results clearly demonstrate that only an ultrathin surface modification layer can dramatically improve the visible light photocatalytic activity of commercial TiO2 powders. Therefore, this surface modification using ALD is an extremely promising route to prepare visible light active photocatalysts.

| S-EPMC6092356 | biostudies-literature

Anisotropy of Percolation Threshold of BaTiO3-Ni0.5Zn0.5Fe2O4 Composite Films.

Project description:A systematic study on the magnetic and electrical percolation phenomena of BaTiO3 (BTO)-NiZnF2O4 (NZFO) composite films is presented in this work with the purpose of simplifying the preparation process of high-performance 1-3-type multiferroic composite films. Results show that the percolation threshold of the composite films depends on the macroscopic dimension of the material. The low-dimensional nature of the composite films results in different percolation thresholds with topological transition in vertical and horizontal directions. BTO-NZFO composite films with a grain size of 15 nm and a thickness of 100 nm exhibited a percolation threshold of 0.18 in the normal direction and a percolation threshold of 0.48 in the horizontal direction. In light of this intriguing feature, a novel multiferroic composite film with 1-3 structure and strong magnetoelectric coupling was easily prepared by a 0-3 process via controlling the NZFO content in the region between two percolation thresholds.

| S-EPMC6536557 | biostudies-literature

MgNb2 O6 Modified K0.5 Na0.5 NbO3 Eco-Piezoceramics: Scalable Processing, Structural Distortion and Complex Impedance at Resonance.

Project description:In this work, piezoceramics of the lead-free composition K0.5 Na0.5 NbO3 with an increasing amount of MgNb2 O6 (0, 0.5, 1, 2 wt.%) were prepared through conventional solid-state synthesis and sintered in air atmosphere at 1100 °C. The effect of magnesium niobate addition on structure, microstructure and piezoelectric properties was evaluated. The ceramics maintain the orthorhombic Amm2 phase for all compositions, while an orthorhombic Pbcm secondary phase was found for increasing the concentration of MgNb2 O6 . Our results show that densification of these ceramics can be significantly improved up to 94.9 % of theoretical density by adding a small amount of magnesium-based oxide (1 wt.%). Scanning electron microscopy morphology of the 1 wt.% system reveals a well-packed structure with homogeneous grain size of ∼2.72 μm. Dielectric and piezoelectric properties become optimal for 0.5-1.0 wt.% of MgNb2 O6 that shows, with respect to the unmodified composition, either higher piezoelectric coefficients, lower anisotropy and relatively low piezoelectric losses (d33 =97 pC N-1 ; d31 =-36.99 pC N-1 and g31 =-14.04×10-3 mV N-1 ; Qp (d31 )=76 and Qp (g31 )=69) or enhanced electromechanical coupling factors (kp =29.06 % and k31 =17.25 %).

| S-EPMC8369846 | biostudies-literature

Sonochemical activation in aqueous medium for solid-state synthesis of BaTiO3 powders.

Project description:BaTiO3-based oxide compounds are important ceramic materials for multilayer ceramic capacitors. In this paper, we report a sonochemical activation process of BaCO3 and TiO2 in an aqueous medium for the synthesis of BaTiO3 powders through a solid-state process. Owing to the physical and chemical effects of the ultrasonication in aqueous medium on the raw materials, BaTiO3 powders could be successfully synthesized at relatively low temperatures through a solid-state reaction, which was significantly enhanced as compared to the case in ethanol medium. Detailed investigations on the resulting BaTiO3 powders and ceramics were performed, and a model to understand the role of aqueous medium on the enhancement of the solid-state reaction was proposed in terms of Ba2+ ion leaching and zeta potential of TiO2, which are strongly affected by the pH of the aqueous medium. Our results are not only helpful for cost-effective synthesis of BaTiO3 through the highly reliable solid-state reaction process, but they also provide an understanding of the role of aqueous medium for the sonochemical process using raw materials with partial solubility in water.

| S-EPMC8683772 | biostudies-literature

Monoclinic distortion, polarization rotation and piezoelectricity in the ferroelectric Na0.5Bi0.5TiO3.

Project description:The relationship between crystal structure and physical properties in the ferroelectric Na0.5Bi0.5TiO3 (NBT) has been of interest for the last two decades. Originally, the average structure was held to be of rhombohedral (R3c) symmetry with a fixed polarization direction. This has undergone a series of revisions, however, based on high-resolution X-ray diffraction, total neutron scattering, and optical and electron microscopy. The recent experimental findings suggest that the true average symmetry is monoclinic (space group Cc), which allows for a rotatable spontaneous polarization. Neither polarization rotation nor its potentially important real role in enhanced piezoelectricity is well understood. The present work describes an in situ investigation of the average monoclinic distortion in NBT by time-resolved single-crystal X-ray diffraction under external electric fields. The study presents a high-resolution inspection of the characteristic diffraction features of the monoclinic distortion - splitting of specific Bragg reflections - and their changes under a cyclic electric field. The results favour a model in which there is direct coupling between the shear monoclinic strain and the polarization rotation. This suggests that the angle of polarization rotation under a sub-coercive electric field could be 30° or more.

| S-EPMC6038949 | biostudies-literature

Compositional induced structural phase transitions in (1 - x)(K0.5Na0.5)NbO3-x(Ba0.5Sr0.5)TiO3 ferroelectric solid solutions.

Project description:Ferroelectric materials exhibiting switchable and spontaneous polarization have strong potential to be utilized in various novel electronic devices. Solid solutions of different perovskite structures induce the coexistence of various phases and enhance the physical functionalities around the phase coexistence region. The construction of phase diagrams is important as they describe the material properties, which are linked to the underpinning physics determining the system. Here we present the phase diagram of (K0.5Na0.5NbO3)-(Ba0.5Sr0.5TiO3) (KNN-BST) system as a function of composition and their associated physical properties. Lead-free (1 - x)KNN-xBST (0 ≤ x ≤ 0.3) solid solution ceramics were synthesized by conventional solid-state reaction technique. The X-ray diffraction and Raman spectroscopic studies indicate composition-dependent structural phase transitions from an orthorhombic phase for x = 0 to orthorhombic + tetragonal dual-phase (for 0.025 ≤ x ≤ 0.15), then a tetragonal + cubic dual-phase (x = 0.2) and finally a cubic single phase for x ≥ 0.25 at room temperature (RT). Among these, the orthorhombic + tetragonal dual-phase system shows an enhanced value of the dielectric constant at room temperature. The phase transition temperatures, orthorhombic to tetragonal (TO-T) and tetragonal to cubic (TC), decrease with the increase in BST concentrations. The ferroelectric studies show a decrease of both 2Pr and EC values with a rise in BST concentration and x = 0.025 showed a maximum piezoelectric coefficient.

| S-EPMC10625606 | biostudies-literature

Local disorder in Na0.5Bi0.5TiO3-piezoceramic determined by 3D electron diffuse scattering.

Project description:Local structural distortions in Na0.5Bi0.5TiO3-based solid solutions have been proved to play a crucial role in understanding and tuning their enhanced piezoelectric properties near the morphotropic phase boundary. In this work all local structural disorders in a lead-free ternary system, namely 85%Na0.5Bi0.5TiO3-10%Bi0.5K0.5TiO3-5%BaTiO3, were mapped in reciprocal space by 3D electron diffraction. Furthermore, a comprehensive model of the local disorder was developed by analysing the intensity and morphology of the observed weak diffuse scattering. We found that the studied ceramics consists of plate-like in-phase oxygen octahedral nanoscale domains randomly distributed in an antiphase tilted matrix. In addition, A-site chemical short-range order of Na/Bi and polar displacements contribute to different kinds of diffuse scattering. The proposed model explains all the observed diffraction features and offers insight into the ongoing controversy over the nature of local structural distortions in Na0.5Bi0.5TiO3-based solid solutions.

| S-EPMC5624983 | biostudies-literature

Intrinsic and tunable ferromagnetism in Bi0.5Na0.5TiO3 through CaFeO3-δ modification.

Project description:New (1-x)Bi0.5Na0.5TiO3 + xCaFeO3-δ solid solution compounds were fabricated using a sol-gel method. The CaFeO3-δ materials were mixed into host Bi0.5Na0.5TiO3 materials to form a solid solution that exhibited similar crystal symmetry to those of Bi0.5Na0.5TiO3 phases. The random distribution of Ca and Fe cations in the Bi0.5Na0.5TiO3 crystals resulted in a distorted structure. The optical band gaps decreased from 3.11 eV for the pure Bi0.5Na0.5TiO3 samples to 2.34 eV for the 9 mol% CaFeO3-δ-modified Bi0.5Na0.5TiO3 samples. Moreover, the Bi0.5Na0.5TiO3 samples exhibited weak photoluminescence because of the intrinsic defects and suppressed photoluminescence with increasing CaFeO3-δ concentration. Experimental and theoretical studies via density functional theory calculations showed that pure Bi0.5Na0.5TiO3 exhibited intrinsic ferromagnetism, which is associated with the possible presence of Bi, Na, and Ti vacancies and Ti3+-defect states. Further studies showed that such an induced magnetism by intrinsic defects can also be enhanced effectively with CaFeO3-δ addition. This study provides a basis for understanding the role of secondary phase as a solid solution in Bi0.5Na0.5TiO3 to facilitate the development of lead-free ferroelectric materials.

| S-EPMC7148307 | biostudies-literature

Interfacial Oxygen Octahedral Coupling-Driven Robust Ferroelectricity in Epitaxial Na0.5Bi0.5TiO3 Thin Films.

Project description:The oxygen octahedral rotation (OOR) forms fundamental atomic distortions and symmetries in perovskite oxides and definitely determines their properties and functionalities. Therefore, epitaxial strain and interfacial structural coupling engineering have been developed to modulate the OOR patterns and explore novel properties, but it is difficult to distinguish the 2 mechanisms. Here, different symmetries are induced in Na0.5Bi0.5TiO3 (NBT) epitaxial films by interfacial oxygen octahedral coupling rather than epitaxial strain. The NBT film grown on the Nb:SrTiO3 substrate exhibits a paraelectric tetragonal phase, while with La0.5Sr0.5MnO3 as a buffer layer, a monoclinic phase and robust ferroelectricity are obtained, with a remanent polarization of 42 μC cm-2 and a breakdown strength of 7.89 MV cm-1, which are the highest record among NBT-based films. Moreover, the interfacial oxygen octahedral coupling effect is demonstrated to propagate to the entire thickness of the film, suggesting an intriguing long-range effect. This work provides a deep insight into understanding the structure modulation in perovskite heterostructures and an important avenue for achieving unique functionalities.

| S-EPMC10351392 | biostudies-literature

Enhanced Energy Storage Performance in Na0.5Bi0.5TiO3-Based Relaxor Ferroelectric Ceramics via Compositional Tailoring.

Project description:Owing to the high power density, excellent operational stability and fast charge/discharge rate, and environmental friendliness, the lead-free Na0.5Bi0.5TiO3 (NBT)-based relaxor ferroelectrics exhibit great potential in pulsed power capacitors. Herein, novel lead-free (1-x)(0.7Na0.5Bi0.5TiO3-0.3Sr0.7Bi0.2TiO3)-xBi(Mg0.5Zr0.5)O3 (NBT-SBT-xBMZ) relaxor ferroelectric ceramics were successfully fabricated using a solid-state reaction method and designed via compositional tailoring. The microstructure, dielectric properties, ferroelectric properties, and energy storage performance were investigated. The results indicate that appropriate Bi(Mg0.5Zr0.5)O3 content can effectively enhance the relaxor ferroelectric characteristics and improve the dielectric breakdown strength by forming fine grain sizes and diminishing oxygen vacancy concentrations. Therefore, the optimal Wrec of 6.75 J/cm3 and a η of 79.44% were simultaneously obtained in NBT-SBT-0.15BMZ at 20 °C and 385 kV/cm. Meanwhile, thermal stability (20-180 °C) and frequency stability (1-200 Hz) associated with the ultrafast discharge time of ~49.1 ns were also procured in the same composition, providing a promising material system for applications in power pulse devices.

| S-EPMC9457184 | biostudies-literature