Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High-performance photonic transformers for DC voltage conversion.

ABSTRACT: Direct current (DC) converters play an essential role in electronic circuits. Conventional high-efficiency DC voltage converters, especially step-up type, rely on switching operation, where energy is periodically stored within and released from inductors and/or capacitors connected in a variety of circuit topologies. Since these energy storage components, especially inductors, are fundamentally difficult to scale down, miniaturization of switching converters proves challenging. Furthermore, the resulting switching currents produce significant electromagnetic noise. To overcome the limitations of switching converters, photonic transformers, where voltage conversion is achieved through light emission and detection processes, have been demonstrated. However, the demonstrated efficiency is significantly below that of the switching converter. Here we perform a detailed balance analysis and show that with a monolithically integrated design that enables efficient photon transport, the photonic transformer can operate with a near-unity conversion efficiency and high voltage conversion ratio. We validate the theory with a transformer constructed with off-the-shelf discrete components. Our experiment showcases near noiseless operation and a voltage conversion ratio that is significantly higher than obtained in previous photonic transformers. Our findings point to the possibility of a high-performance optical solution to miniaturizing DC power converters and improving the electromagnetic compatibility and quality of electrical power.

SUBMITTER: Zhao B

PROVIDER: S-EPMC8333049 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High-performance fractional order terminal sliding mode control strategy for DC-DC Buck converter.

Project description:This paper presents an adaption of the fractional order terminal sliding mode control (AFTSMC) strategy for DC-DC Buck converter. The following strategy aims to design a novel nonlinear sliding surface function, with a double closed-loop structure of voltage and current. This strategy is a fusion of two characteristics: terminal sliding mode control (TSMC) and fractional order calculation (FOC). In addition, the influence of "the controller parameters" on the "performance of double closed-loop system" is investigated. It is observed that the value of terminal power has to be chosen to make a compromise between start-up and transient response of the converter. Therefore the AFTSMC strategy chooses the value of the terminal power adaptively, and this strategy can lead to the appropriate number of fractional order as well. Furthermore, through the fractional order analysis, the system can reach the sliding mode surface in a finite time. And the theoretical considerations are verified by numerical simulation. The performance of the AFTSMC and TSMC strategies is tested by computer simulations. And the comparison simulation results show that the AFTSMC exhibits a considerable improvement in terms of a faster output voltage response during load changes. Moreover, AFTSMC obtains a faster dynamical response, smaller steady-state error rate and lower overshoot.

| S-EPMC5662226 | biostudies-literature

The Functionalized Single-Walled Carbon Nanotubes Gas Sensor With Pd Nanoparticles for Hydrogen Detection in the High-Voltage Transformers.

Project description:Single-walled carbon nanotubes (SWCNTs) have been widely discussed and applied as novel gas sensing nanomaterials. Hydrogen is one of the remarkable fault characteristic gases in high-voltage oil-paper insulated transformers. In this paper, 3.07 wt% Pd nanoparticles (NPs) were used to decorate SWCNTs. The unloaded, the carboxylated, and the Pd-doped SWCNTs were fabricated into three planar gas sensors, and their gas sensing properties to hydrogen were studied. Gas sensing mechanism was analyzed. Results show that the optimal operating temperature of a Pd-doped SWCNTs-based gas sensor is 125°C lower than that of the unloaded SWCNTs-based gas sensor, and it shows the highest gas sensing response value. This is attributed to the decreasing work function of Pd, which reduces the hole carries in the nanotubes.

| S-EPMC7154150 | biostudies-literature

High voltage DC power supply with power factor correction based on LLC resonant converter.

Project description:This paper presents analysis, design and experimentation of a high voltage DC power supply (HVDCPS) with power factor correction based on LLC resonant converter. For power factor correction improvement, the proposed topology has an input rectifier with two filter capacitors, two inductors with a bus capacitor (Cbus) and a resonant tank. To prevent the reverse current flow towards the source diodes (D9 & D10) are employed. A couple of power switches are inserted in a single leg that makes a half-bridge network. To form an LLC resonance circuit, a capacitor and two inductors are connected to the primary winding of the high voltage transformer (HVT). To rectify the high frequency and high voltage, a full-bridge rectifier is inserted to secondary side of high voltage transformer (HVT). The secondary diodes always get on and off under zero current switching (ZCS) due to discontinuous conduction mode of proposed topology. It is found that due to power factor correction, less cost, lower losses and smaller size, the proposed topology achieves several major improvements over the conventional high voltage power supply. To obtain zero voltage switching (ZVS) the converter operate in a narrow frequency range. The output voltage can be varied or regulate through pulse width modulation of power switches. Due to ZVS and ZCS, the proposed topology has minimum switching losses and therefore higher efficiency. To verify the feasibility of the proposed topology a prototype is being implemented and verified by simulation & experimental results for 1.5KV prototype of the proposed topology. The results make sure the achievement, good efficiency and successful operation of the proposed topology.

| S-EPMC7505463 | biostudies-literature

Selecting High-Performance Gold Nanorods for Photothermal Conversion.

Project description:In this work, we establish a new paradigm on identifying optimal arbitrarily shaped metallic nanostructures for photothermal applications. Crucial thermo-optical parameters that rule plasmonic heating are appraised, exploring a nanoparticle size-dependence approach. Our results indicate two distinct figures of merit for the optimization of metallic nanoheaters, under both non-cumulative femtosecond and continuum laser excitation. As a case study, gold nanorods are evaluated for infrared photothermal conversion in water, and the influence of the particle length and diameter are depicted. For non-cumulative femtosecond pulses, efficient photothermal conversion is observed for gold nanorods of small volumes. For continuous wave (CW) excitation at 800 nm and 1064 nm, the optimal gold nanorod dimensions (in water) are, respectively, 90 × 25nm and 150 × 30 nm. Figure of Merit (FoM) variations up to 700% were found considering structures with the same peak wavelength. The effect of collective heating is also appraised. The designing of high-performance plasmonic nanoparticles, based on quantifying FoM, allows a rational use of nanoheaters for localized photothermal applications.

| S-EPMC9737450 | biostudies-literature

Deep-learning-powered photonic analog-to-digital conversion.

Project description:Analog-to-digital converters (ADCs) must be high speed, broadband, and accurate for the development of modern information systems, such as radar, imaging, and communications systems; photonic technologies are regarded as promising technologies for realizing these advanced requirements. Here, we present a deep-learning-powered photonic ADC architecture that simultaneously exploits the advantages of electronics and photonics and overcomes the bottlenecks of the two technologies, thereby overcoming the ADC tradeoff among speed, bandwidth, and accuracy. Via supervised training, the adopted deep neural networks learn the patterns of photonic system defects and recover the distorted data, thereby maintaining the high quality of the electronic quantized data succinctly and adaptively. The numerical and experimental results demonstrate that the proposed architecture outperforms state-of-the-art ADCs with developable high throughput; hence, deep learning performs well in photonic ADC systems. We anticipate that the proposed architecture will inspire future high-performance photonic ADC design and provide opportunities for substantial performance enhancement for the next-generation information systems.

| S-EPMC6804794 | biostudies-literature

In vivo conversion of BM plasmacytoid DC into CD11b+ conventional DC during virus infection.

Project description:DC are a highly heterogeneous population that plays a critical role in host defense. We previously demonstrated that virus infection induces BM plasmacytoid DC (pDC) differentiation into CD11b(+) conventional DC (cDC) upon in vitro culture with Fms-like tyrosine kinase 3 ligand (Flt3L). Here we use immunoglobulin D-J rearrangements and pDC adoptive transfer to provide definitive proof supporting BM pDC conversion into CD11b(+) cDC during in vivo viral infection. We show that in vivo BM pDC conversion into CD11b(+) cDC relates to enhanced ability to prime virus-specific T cells. Furthermore, we demonstrate that in vivo pDC conversion does not rely on viral infection of BM pDC, but instead is mediated by type I IFN signaling. Finally, by exploiting recently identified pDC-specific Ab, we provide further characterizations of the BM pDC fraction that exhibits this broader developmental plasticity. Collectively, these data indicate that BM pDC actively contribute to the CD11b(+) cDC pool during in vivo viral infection and delineates molecular, functional, and phenotypic features of this novel developmental pathway.

| S-EPMC2897746 | biostudies-literature

Conversion of Reactive Carbon Solutions into CO at Low Voltage and High Carbon Efficiency.

Project description:Electrolyzers are now capable of reducing carbon dioxide (CO2) into products at high reaction rates but are often characterized by low energy efficiencies and low CO2 utilization efficiencies. We report here an electrolyzer that reduces 3.0 M KHCO3(aq) into CO(g) at a high rate (partial current density for CO of 220 mA cm-2) and a CO2 utilization efficiency of 40%, at a voltage of merely 2.3 V. These results were made possible by using: (i) a reactive carbon solution enriched in KHCO3 as the feedstock instead of gaseous CO2; (ii) a cation exchange membrane instead of an anion exchange membrane, which is common to the field; and (iii) the hydrogen oxidation reaction (HOR) at the anode instead of the oxygen evolution reaction (OER). The voltage reported here is the lowest reported for any CO2 to CO electrolyzer that operates at high current densities (i.e., a partial current density for CO greater than 200 mA cm-2) with a CO2 utilization efficiency of greater than 20%. This study highlights how the choice of feedstock, membrane, and anode chemistries affects the rate and efficiency at which CO2 is converted into products.

| S-EPMC9228564 | biostudies-literature

High-performance silver nanowires transparent conductive electrodes fabricated using manufacturing-ready high-speed photonic sinterization solutions.

Project description:On the long road towards low-cost flexible hybrid electronics, integration and printable solar energy harvesting solutions, there is an urgent need for high-performance transparent conductive electrodes produced using manufacturing-ready techniques and equipment. In recent years, randomly-distributed metallic nanowire-based transparent mesh electrodes have proven highly-promising as they offer a superb compromise between high performances and low fabrication costs. Unfortunately, these high figure-of-merit transparent mesh electrodes usually rely heavily on extensive post-deposition processing. While conventional thermal annealing yields good performances, it is especially ill-suited for deposition on low-temperature substrates or for high-throughput manufacturing solutions. Similarly, laser-induced annealing severely limits the processing time for electrodes covering large surfaces. In this paper, we report the fabrication of ultra high-performance silver nanowires-based transparent conductive electrodes fabricated using optimized manufacturing-ready ultrafast photonic curing solutions. Using conventional indium tin oxide (ITO) as our benchmark for transparent electrodes, we demonstrate a 2.6-2.7 [Formula: see text] performance gain using two different figure-of-merit indicators. Based on these results, we believe this research provides an ideal manufacturing-ready approach for the large-scale and low-cost fabrication of ultra high-performance transparent electrodes for flexible hybrid electronics and solar-energy harvesting applications.

| S-EPMC8683411 | biostudies-literature

Vertically Transported Graphene Oxide for High-Performance Osmotic Energy Conversion.

Project description:Reverse electrodialysis is a promising method to harvest the osmotic energy stored between seawater and freshwater, but it has been a long-standing challenge to fabricate permselective membranes with the power density surpassing the industry benchmark of 5.0 W m-2 for half a century. Herein, a vertically transported graphene oxide (V-GO) with the combination of high ion selectivity and ultrafast ion permeation is reported, whose permeation is three orders of magnitude higher than the extensively studied horizontally transported GO (H-GO). By mixing artificial seawater and river water, an unprecedented high output power density of 10.6 W m-2 is obtained, outperforming all existing materials. Molecular dynamics (MD) simulations reveal the mechanism of the ultrafast transport in V-GO results from the quick entering of ions and the large accessible area as well as the apparent short diffusion paths in V-GO. These results will facilitate the practical application of osmotic energy and bring an innovative design strategy for various systems involving ultrafast transport, such as filtration and catalysis.

| S-EPMC7312320 | biostudies-literature

High-Performance N2-to-NH3 Conversion Electrocatalyzed by Mo2C Nanorod.

Project description:The synthesis of NH3 is mainly dominated by the traditional energy-consuming Haber-Bosch process with a mass of CO2 emission. Electrochemical conversion of N2 to NH3 emerges as a carbon-free process for the sustainable artificial N2 reduction reaction (NRR), but requires an efficient and stable electrocatalyst. Here, we report that the Mo2C nanorod serves as an excellent NRR electrocatalyst for artificial N2 fixation to NH3 with strong durability and acceptable selectivity under ambient conditions. Such a catalyst shows a high Faradaic efficiency of 8.13% and NH3 yield of 95.1 ?g h-1 mg-1 cat at -0.3 V in 0.1 M HCl, surpassing the majority of reported electrochemical conversion NRR catalysts. Density functional theory calculation was carried out to gain further insight into the catalytic mechanism involved.

| S-EPMC6346386 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data