Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Performance Evaluation of Commercially Available Masks in Korea for Filtering Airborne Droplets Containing Bacteria.

ABSTRACT: The coronavirus disease (COVID-19) pandemic is a global health threat and has posed a challenge for society and social care services as well as healthcare systems. Due to the risks involved in being exposed to the virus, public health actions such as wearing masks and physical distancing are necessary to reduce its spread. However, using non-validated masks is a serious issue as such masks may provide inadequate protection against airborne bioaerosol transmission, resulting in the spread of the virus. Therefore, it is necessary to evaluate the filtering performances of the masks against bioaerosols as well as particulate matter (PM). Here, we evaluated the filtering performances of sixteen different masks (four brands each of woven, antidroplet, KF80, and KF94 masks) commercially available in Korea with high market shares. As a simulation of being exposed to bioaerosols and to the yellow dust commonly found in Korea, the filtration efficiency levels of the masks were tested against airborne bacteria-containing droplets and against fine dusts of different ranges of particle sizes. Their filtration efficiency levels against the droplets showed strong positive correlations, specifically Pearson correlation coefficient r values of 0.917, 0.905, and 0.894, with their efficiency levels against PM1.0, PM2.5, and PM10, respectively. The results of this study should be useful for choosing appropriate masks, including those that meet filtering performance requirements.

SUBMITTER: Lee EH

PROVIDER: S-EPMC8345791 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks.

Project description:In the case of pandemic crisis situations, a crucial lack of protective material such as protective face masks for healthcare professionals can occur. A proof of concept (PoC) and prototype are presented, demonstrating a reusable custom-made three-dimensionally (3D) printed face mask based on materials and techniques (3D imaging and 3D printing) with global availability. The individualized 3D protective face mask consists of two 3D-printed reusable polyamide composite components (a face mask and a filter membrane support) and two disposable components (a head fixation band and a filter membrane). Computer-aided design (CAD) was used to produce the reusable components of the 3D face mask based on individual facial scans, which were acquired using a new-generation smartphone with two cameras and a face scanning application. 3D modelling can easily be done by CAD designers worldwide with free download software. The disposable non-woven melt-blown filter membrane is globally available from industrial manufacturers producing FFP2/3 protective masks for painting, construction, agriculture, and the textile industry. Easily available Velcro fasteners were used as a disposable head fixation band. A cleaning and disinfection protocol is proposed. Leakage and virological testing of the reusable components of the 3D face mask, following one or several disinfection cycles, has not yet been performed and is essential prior to its use in real-life situations. This PoC should allow the reader to consider making and/or virologically testing the described custom-made 3D-printed face masks worldwide. The surface tessellation language (STL) format of the original virtual templates of the two reusable components described in this paper can be downloaded free of charge using the hyperlink (Supplementary Material online).

| S-EPMC7132499 | biostudies-literature

Genotyping performance evaluation of commercially available HIV-1 drug resistance test.

Project description:BackgroundATCC HIV-1 drug resistance test kit was designed to detect HIV-1 drug resistance (HIVDR) mutations in the protease and reverse transcriptase genes for all HIV-1 group M subtypes and circulating recombinant forms. The test has been validated for both plasma and dried blood spot specimen types with viral load (VL) of ≥1000 copies/ml. We performed an in-country assessment on the kit to determine the genotyping sensitivity and its accuracy in detecting HIVDR mutations using plasma samples stored under suboptimal conditions.MethodsAmong 572 samples with VL ≥1000 copies/ml that had been genotyped by ViroSeq assay, 183 were randomly selected, including 85 successful genotyped and 98 unsuccessful genotyped samples. They were tested with ATCC kits following the manufacturer's instructions. Sequence identity and HIVDR patterns were analysed with Stanford University HIV Drug Resistance HIVdb program.ResultsOf the 183 samples, 127 (69.4%) were successfully genotyped by either method. While ViroSeq system genotyped 85/183 (46.5%) with median VL of 32,971 (IQR: 11,150-96,506) copies/ml, ATCC genotyped 115/183 (62.8%) samples with median VL of 23,068 (IQR: 7,397-86,086) copies/ml. Of the 98 unsuccessful genotyped samples with ViroSeq assay, 42 (42.9%) samples with lower median VL of 13,906 (IQR: 6,122-72,329) copies/ml were successfully genotyped using ATCC. Sequence identity analysis revealed that the sequences generated by both methods were >98% identical and yielded similar HIVDR profiles at individual patient level.ConclusionThis study confirms that ATCC kit showed greater sensitivity in genotyping plasma samples stored in suboptimal conditions experiencing frequent and prolonged power outage. Thus, it is more sensitive particularly for subtypes A and A/G HIV-1 in resource-limited settings.

| S-EPMC6023177 | biostudies-literature

Diagnostic performance of commercially available COVID-19 serology tests in Brazil.

Project description:Timely and accurate laboratory testing is essential for managing the global COVID-19 pandemic. Reverse transcription polymerase chain reaction remains the gold-standard for SARS-CoV-2 diagnosis, but several practical issues limit the test's use. Immunoassays have been indicated as an alternative for individual and mass testing.ObjectivesTo access the performance of 12 serological tests for COVID-19 diagnosis.MethodsWe conducted a blind evaluation of six lateral-flow immunoassays (LFIAs) and six enzyme-linked immunosorbent assays (ELISAs) commercially available in Brazil for detecting anti-SARS-CoV-2 antibodies.ResultsConsidering patients with seven or more days of symptoms, the sensitivity ranged from 59.5% to 83.1% for LFIAs and from 50.7% to 92.6% for ELISAs. For both methods, the sensitivity increased with clinical severity and days of symptoms. The agreement among LFIAs performed with digital blood and serum was moderate. Specificity was, in general, higher for LFIAs than for ELISAs. Infectious diseases prevalent in the tropics, such as HIV, leishmaniasis, arboviruses, and malaria, represent conditions with the potential to cause false-positive results with these tests, which significantly compromises their specificity.ConclusionThe performance of immunoassays was only moderate, affected by the duration and clinical severity of the disease. Absence of discriminatory power between IgM/IgA and IgG has also been demonstrated, which prevents the use of acute-phase antibodies for decisions on social isolation.

| S-EPMC7544564 | biostudies-literature

Evaluation of commercially available small RNA methods for plant samples

Project description:Plant small RNAs are a diverse and complex set of molecules, ranging in length from 21 to 24 nt, involved in a wide range of essential biological processes. Nowadays, high-throughput sequencing is the most commonly used method for the discovery and quantification of small RNAs. However, it is known that several biases can occur during the preparation of small RNA libraries, especially using low input RNA. We used two types of plant biological samples to evaluate the performance of seven commercially available methods for small RNA library construction, using different RNA input amounts. We show that when working with plant material, library construction methods have differing capabilities to capture small RNAs, and that different library construction methods provide better results when applied to the detection of microRNAs, phased small RNAs, or tRNA-derived fragments.

2021-08-01 | GSE156973 | GEO

Commercially available alternatives to palm oil.

Project description:Since several years there has been a demand for food products free of palm oil, noticeable in the Western European market. Alternatives based on liquid oils, fully hydrogenated fats, and exotic fats like shea and sal etc., have been developed by the research groups of several specialty oils and fats suppliers. This article describes the advantages and disadvantages of those products and compares them to similar products based on palm oil. It is also discussed how reasonable the replacement of palm products would be, since sustainable and 3-MCPD/glycidolester-reduced palm based specialty oils are also available on the market.

| S-EPMC4834613 | biostudies-other

Assessing the airborne survival of bacteria in populations of aerosol droplets with a novel technology.

Project description:The airborne transmission of infection relies on the ability of pathogens to survive aerosol transport as they transit between hosts. Understanding the parameters that determine the survival of airborne microorganisms is critical to mitigating the impact of disease outbreaks. Conventional techniques for investigating bioaerosol longevity in vitro have systemic limitations that prevent the accurate representation of conditions that these particles would experience in the natural environment. Here, we report a new approach that enables the robust study of bioaerosol survival as a function of relevant environmental conditions. The methodology uses droplet-on-demand technology for the generation of bioaerosol droplets (1 to greater than 100 per trial) with tailored chemical and biological composition. These arrays of droplets are captured in an electrodynamic trap and levitated within a controlled environmental chamber. Droplets are then deposited on a substrate after a desired levitation period (less than 5 s to greater than 24 h). The response of bacteria to aerosolization can subsequently be determined by counting colony forming units, 24 h after deposition. In a first study, droplets formed from a suspension of Escherichia coli MRE162 cells (108 ml-1) with initial radii of 27.8 ± 0.08 µm were created and levitated for extended periods of time at 30% relative humidity. The time-dependence of the survival rate was measured over a time period extending to 1 h. We demonstrate that this approach can enable direct studies at the interface between aerobiology, atmospheric chemistry and aerosol physics to identify the factors that may affect the survival of airborne pathogens with the aim of developing infection control strategies for public health and biodefence applications.

| S-EPMC6364649 | biostudies-literature

Conventional culture methods with commercially available media unveil the presence of novel culturable bacteria.

Project description:Recent metagenomic analysis has revealed that our gut microbiota plays an important role in not only the maintenance of our health but also various diseases such as obesity, diabetes, inflammatory bowel disease, and allergy. However, most intestinal bacteria are considered 'unculturable' bacteria, and their functions remain unknown. Although culture-independent genomic approaches have enabled us to gain insight into their potential roles, culture-based approaches are still required to understand their characteristic features and phenotypes. To date, various culturing methods have been attempted to obtain these 'unculturable' bacteria, but most such methods require advanced techniques. Here, we have tried to isolate possible unculturable bacteria from a healthy Japanese individual by using commercially available media. A 16S rRNA (ribosomal RNA) gene metagenomic analysis revealed that each culture medium showed bacterial growth depending on its selective features and a possibility of the presence of novel bacterial species. Whole genome sequencing of these candidate strains suggested the isolation of 8 novel bacterial species classified in the Actinobacteria and Firmicutes phyla. Our approach indicates that a number of intestinal bacteria hitherto considered unculturable are potentially culturable and can be cultured on commercially available media. We have obtained novel gut bacteria from a healthy Japanese individual using a combination of comprehensive genomics and conventional culturing methods. We would expect that the discovery of such novel bacteria could illuminate pivotal roles for the gut microbiota in association with human health.

| S-EPMC6363062 | biostudies-literature

Phylogenetic affiliation of soil bacteria that degrade aliphatic polyesters available commercially as biodegradable plastics.

Project description:Thirty-nine morphologically different soil bacteria capable of degrading poly(beta-hydroxyalkanoate), poly(epsilon-caprolactone), poly(hexamethylene carbonate), or poly(tetramethylene succinate) were isolated. Their phylogenetic positions were determined by 16S ribosomal DNA sequencing, and all of them fell into the classes Firmicutes and Proteobacteria. Determinations of substrate utilization revealed characteristic patterns of substrate specificities.

| S-EPMC90957 | biostudies-literature

A performance comparison of eight commercially available automatic classifiers for facial affect recognition.

Project description:In the wake of rapid advances in automatic affect analysis, commercial automatic classifiers for facial affect recognition have attracted considerable attention in recent years. While several options now exist to analyze dynamic video data, less is known about the relative performance of these classifiers, in particular when facial expressions are spontaneous rather than posed. In the present work, we tested eight out-of-the-box automatic classifiers, and compared their emotion recognition performance to that of human observers. A total of 937 videos were sampled from two large databases that conveyed the basic six emotions (happiness, sadness, anger, fear, surprise, and disgust) either in posed (BU-4DFE) or spontaneous (UT-Dallas) form. Results revealed a recognition advantage for human observers over automatic classification. Among the eight classifiers, there was considerable variance in recognition accuracy ranging from 48% to 62%. Subsequent analyses per type of expression revealed that performance by the two best performing classifiers approximated those of human observers, suggesting high agreement for posed expressions. However, classification accuracy was consistently lower (although above chance level) for spontaneous affective behavior. The findings indicate potential shortcomings of existing out-of-the-box classifiers for measuring emotions, and highlight the need for more spontaneous facial databases that can act as a benchmark in the training and testing of automatic emotion recognition systems. We further discuss some limitations of analyzing facial expressions that have been recorded in controlled environments.

| S-EPMC7182192 | biostudies-literature

Performance comparison of four commercially available cytometers using fluorescent, polystyrene, submicron-scale beads.

Project description:Accurate comparison of flow cytometric data requires an understanding of how the cytometric fingerprint of a sample may vary from instrument to instrument. Key sources of variability include the number, wavelengths, and power of excitation lasers; the number and types of emission detectors; sample-handling systems and options; and whether fixed or dynamic detector voltages are used. To explore this variability, suspensions of three sizes (0.2, 0.5, and 0.8 μm-diameter) of solid, fluorescent, polystyrene beads were prepared. The suspensions were then run on four flow cytometers, keeping instrument settings as consistent as possible. The results are displayed graphically in Figure 3 of the article "Flow cytometry applications in water treatment, distribution, and reuse: A review" (DOI: 10.1016/j.watres.2018.12.016) [1]. This dataset contains the complete FCS files generated from the experimental comparison. In the development and application of flow cytometry to water quality assessment, we recommend data sharing in this manner to enable comprehensive reporting, meaningful comparison of results obtained using different cytometer models, enhanced exploration of data along multiple parameters, and use of acquired data for computational advancements in the field.

| S-EPMC6451693 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data