Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Valence band engineering of GaAsBi for low noise avalanche photodiodes.

ABSTRACT: Avalanche Photodiodes (APDs) are key semiconductor components that amplify weak optical signals via the impact ionization process, but this process' stochastic nature introduces 'excess' noise, limiting the useful signal to noise ratio (or sensitivity) that is practically achievable. The APD material's electron and hole ionization coefficients (α and β respectively) are critical parameters in this regard, with very disparate values of α and β necessary to minimize this excess noise. Here, the analysis of thirteen complementary p-i-n/n-i-p diodes shows that alloying GaAs with ≤ 5.1 % Bi dramatically reduces β while leaving α virtually unchanged-enabling a 2 to 100-fold enhancement of the GaAs α/β ratio while extending the wavelength beyond 1.1 µm. Such a dramatic change in only β is unseen in any other dilute alloy and is attributed to the Bi-induced increase of the spin-orbit splitting energy (∆so). Valence band engineering in this way offers an attractive route to enable low noise semiconductor APDs to be developed.

SUBMITTER: Liu Y

PROVIDER: S-EPMC8346614 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Skin-like low-noise elastomeric organic photodiodes.

Project description:[Figure: see text].

| S-EPMC8673773 | biostudies-literature

Plasmonic field confinement for separate absorption-multiplication in InGaAs nanopillar avalanche photodiodes.

Project description:Avalanche photodiodes (APDs) are essential components in quantum key distribution systems and active imaging systems requiring both ultrafast response time to measure photon time of flight and high gain to detect low photon flux. The internal gain of an APD can improve system signal-to-noise ratio (SNR). Excess noise is typically kept low through the selection of material with intrinsically low excess noise, using separate-absorption-multiplication (SAM) heterostructures, or taking advantage of the dead-space effect using thin multiplication regions. In this work we demonstrate the first measurement of excess noise and gain-bandwidth product in III-V nanopillars exhibiting substantially lower excess noise factors compared to bulk and gain-bandwidth products greater than 200 GHz. The nanopillar optical antenna avalanche detector (NOAAD) architecture is utilized for spatially separating the absorption region from the avalanche region via the NOA resulting in single carrier injection without the use of a traditional SAM heterostructure.

| S-EPMC4667247 | biostudies-literature

Single-photon property characterization of 1.3 μm emissions from InAs/GaAs quantum dots using silicon avalanche photodiodes.

Project description:We developed a new approach to test the single-photon emissions of semiconductor quantum dots (QDs) in the optical communication band. A diamond-anvil cell pressure device was used for blue-shifting the 1.3 μm emissions of InAs/GaAs QDs to 0.9 μm for detection by silicon avalanche photodiodes. The obtained g((2))(0) values from the second-order autocorrelation function measurements of several QD emissions at 6.58 GPa were less than 0.3, indicating that this approach provides a convenient and efficient method of characterizing 1.3 μm single-photon source based on semiconductor materials.

| S-EPMC3887382 | biostudies-literature

Detection efficiency calibration of single-photon silicon avalanche photodiodes traceable using double attenuator technique.

Project description:A highly accurate method for the determination of the detection efficiency of a silicon single-photon avalanche diode (Si-SPAD) is presented. This method is based on the comparison of the detected count rate of the Si-SPAD compared to the photon rate determined from a calibrated silicon diode using a modified attenuator technique, in which the total attenuation is measured in two attenuation steps. Furthermore, a validation of this two-step method is performed using attenuators of higher transmittance. The setup is a tabletop one, laser-based, and fully automated. The measurement uncertainty components are determined and analyzed in detail. The obtained standard measurement uncertainty is < 0.5%. Main contributions are the transmission of the neutral density filters used as attenuators and the spectral responsivity of the calibrated analog silicon diode. Furthermore, the dependence of the detection efficiency of the Si-SPAD on the mean photon number of the impinging laser radiation with Poissonian statistics is investigated.

| S-EPMC4396655 | biostudies-other

Valence band behaviour of zirconium oxide, Photoelectron and Auger spectroscopy study.

Project description:In this study X-ray Photoelectron Spectroscopy and Ultraviolet Photoelectron Spectroscopy were combined to investigate the effect of oxygen incorporation on the valence band behaviour of ZrOx. The Auger transitions involving valence bands are found to mimic the self-folded density of state measured using Ultraviolet Photoelectron Spectroscopy. The valence band once constructed in a sub-oxide form, stays at a fixed energy position despite the change in the stoichiometry. This behaviour is found to be useful in setting a reference for X-ray Photoelectron Spectroscopy charge correction. The results of the charged corrected spectra were compared to other methods and found to be in great agreement. Finally, a correlation between the core-level binding energy and the structural property of ZrOx is given.

| S-EPMC6214953 | biostudies-literature

Valence band structure of InAs(1-x)Bi(x) and InSb(1-x)Bi(x) alloy semiconductors calculated using valence band anticrossing model.

Project description:The valence band anticrossing model has been used to calculate the heavy/light hole and spin-orbit split-off energies in InAs(1-x)Bi(x) and InSb(1-x)Bi(x) alloy systems. It is found that both the heavy/light hole, and spin-orbit split E + levels move upwards in energy with an increase in Bi content in the alloy, whereas the split E - energy for the holes shows a reverse trend. The model is also used to calculate the reduction of band gap energy with an increase in Bi mole fraction. The calculated values of band gap variation agree well with the available experimental data.

| S-EPMC3925516 | biostudies-other

Stabilizing Non-Fullerene Organic Photodiodes through Interface Engineering Enabled by a Tin Ion-Chelated Polymer.

Project description:The recent emergence of non-fullerene acceptors (NFAs) has energized the field of organic photodiodes (OPDs) and made major breakthroughs in their critical photoelectric characteristics. Yet, stabilizing inverted NF-OPDs remains challenging because of the intrinsic degradation induced by improper interfaces. Herein, a tin ion-chelated polyethyleneimine ethoxylated (denoted as PEIE-Sn) is proposed as a generic cathode interfacial layer (CIL) of NF-OPDs. The chelation between tin ions and nitrogen/oxygen atoms in PEIE-Sn contributes to the interface compatibility with efficient NFAs. The PEIE-Sn can effectively endow the devices with optimized cascade alignment and reduced interface defects. Consequently, the PEIE-Sn-OPD exhibits properties of anti-environmental interference, suppressed dark current, and accelerated interfacial electron extraction and transmission. As a result, the unencapsulated PEIE-Sn-OPD delivers high specific detection and fast response speed and shows only slight attenuation in photoelectric performance after exposure to air, light, and heat. Its superior performance outperforms the incumbent typical counterparts (ZnO, SnO2 , and PEIE as the CILs) from metrics of both stability and photoelectric characteristics. This finding suggests a promising strategy for stabilizing NF-OPDs by designing appropriate interface layers.

| S-EPMC10558641 | biostudies-literature

An antibonding valence band maximum enables defect-tolerant and stable GeSe photovoltaics.

Project description:In lead-halide perovskites, antibonding states at the valence band maximum (VBM)-the result of Pb 6s-I 5p coupling-enable defect-tolerant properties; however, questions surrounding stability, and a reliance on lead, remain challenges for perovskite solar cells. Here, we report that binary GeSe has a perovskite-like antibonding VBM arising from Ge 4s-Se 4p coupling; and that it exhibits similarly shallow bulk defects combined with high stability. We find that the deep defect density in bulk GeSe is ~1012 cm-3. We devise therefore a surface passivation strategy, and find that the resulting GeSe solar cells achieve a certified power conversion efficiency of 5.2%, 3.7 times higher than the best previously-reported GeSe photovoltaics. Unencapsulated devices show no efficiency loss after 12 months of storage in ambient conditions; 1100 hours under maximum power point tracking; a total ultraviolet irradiation dosage of 15 kWh m-2; and 60 thermal cycles from -40 to 85 °C.

| S-EPMC7844217 | biostudies-literature

Attosecond intra-valence band dynamics and resonant-photoemission delays in W(110).

Project description:Time-resolved photoelectron spectroscopy with attosecond precision provides new insights into the photoelectric effect and gives information about the timing of photoemission from different electronic states within the electronic band structure of solids. Electron transport, scattering phenomena and electron-electron correlation effects can be observed on attosecond time scales by timing photoemission from valence band states against that from core states. However, accessing intraband effects was so far particularly challenging due to the simultaneous requirements on energy, momentum and time resolution. Here we report on an experiment utilizing intracavity generated attosecond pulse trains to meet these demands at high flux and high photon energies to measure intraband delays between sp- and d-band states in the valence band photoemission from tungsten and investigate final-state effects in resonant photoemission.

| S-EPMC8184802 | biostudies-literature

Low-Noise Dual-Band Polarimetric Image Sensor Based on 1D Bi<sub>2</sub> S<sub>3</sub> Nanowire.

Project description:With the increasing demand for detection accuracy and sensitivity, dual-band polarimetric image sensor has attracted considerable attention due to better object recognition by processing signals from diverse wavebands. However, the widespread use of polarimetric sensors is still limited by high noise, narrow photoresponse range, and low linearly dichroic ratio. Recently, the low-dimensional materials with intrinsic in-plane anisotropy structure exhibit the great potential to realize direct polarized photodetection. Here, strong anisotropy of 1D layered bismuth sulfide (Bi2 S3 ) is demonstrated experimentally and theoretically. The Bi2 S3 photodetector exhibits excellent device performance, which enables high photoresponsivity (32 A W-1 ), Ion /Ioff ratio (1.08 × 104 ), robust linearly dichroic ratio (1.9), and Hooge parameter (2.0 × 10-5 at 1 Hz) which refer to lower noise than most reported low-dimensional materials-based devices. Impressively, such Bi2 S3 nanowire exhibits a good broadband photoresponse, ranging from ultraviolet (360 nm) to short-wave infrared (1064 nm). Direct polarimetric imaging is implemented at the wavelengths of 532 and 808 nm. With these remarkable features, the 1D Bi2 S3 nanowires show great potential for direct dual-band polarimetric image sensors without using any external optical polarizer.

| S-EPMC8292854 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data