Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Label Free Glucose Electrochemical Biosensor Based on Poly(3,4-ethylenedioxy thiophene):Polystyrene Sulfonate/Titanium Carbide/Graphene Quantum Dots.

ABSTRACT: The electrochemical biosensor devices based on enzymes for monitoring biochemical substances are still considered attractive. We investigated the immobilization of glucose oxidase (GOx) on a new composite nanomaterial poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS)/titanium carbide,(Ti₃C₂)/graphene quantum dots(GQD) modified screen-printed carbon electrode (SPCE) for glucose sensing. The characterization and electrochemical behavior of PEDOT:PSS/Ti₃C₂/GQD towards the electrocatalytic oxidation of GOx was analyzed by FTIR, XPS, SEM, cyclic voltammetry (CV), and differential pulse voltammetry (DPV). This composite nanomaterial was found to tend to increase the electrochemical behavior and led to a higher peak current of 100.17 µA compared to 82.01 µA and 95.04 µA for PEDOT:PSS and PEDOT:PSS/Ti₃C₂ alone. Moreover, the detection results demonstrated that the fabricated biosensor had a linear voltammetry response in the glucose concentration range 0-500 µM with a relatively sensitivity of 21.64 µAmM^-1cm^-2 and a detection limit of 65 µM (S/N = 3), with good stability and selectivity. This finding could be useful as applicable guidance for the modification screen printed carbon (SPCE) electrodes focused on composite PEDOT:PSS/Ti₃C₂/GQD for efficient detection using an enzyme-based biosensor.

SUBMITTER: Nashruddin SNA

PROVIDER: S-EPMC8393679 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Electroconductive Hydrogel Based on Functional Poly(Ethylenedioxy Thiophene).

Project description:Poly(ethylene dioxythiophene) with functional pendant groups bearing double bonds is synthesized and employed for the fabrication of electroactive hydrogels with advantageous characteristics: covalently cross-linked porous 3D scaffolds with notable swelling ratio, appropriate mechanical properties, electroactivity in physiological conditions, and suitability for proliferation and differentiation of C2C12 cells. This is a new approach for the fabrication of conductive engineered constructs.

| S-EPMC5024651 | biostudies-literature

Synthesis of Isothianaphthene (ITN) and 3,4-Ethylenedioxy-Thiophene (EDOT)-Based Low-Bandgap Liquid Crystalline Conjugated Polymers.

Project description:Copolymers, consisting of isothianaphthene and phenylene derivatives with liquid crystal groups, were synthesized via Migita-Kosugi-Stille polycondensation reaction. IR absorption, UV-vis optical absorption, and PL spectroscopy measurements were carried out. Thermotropic liquid crystallinity of the polymers with bandgap of ~2.5 eV was confirmed.

| S-EPMC5458956 | biostudies-other

Engineering a Poly(3,4-ethylenedioxythiophene):(Polystyrene Sulfonate) Surface Using Self-Assembling Molecules-A Chemical Library Approach.

Project description:The surface properties of poly(3,4-ethylenedioxythiophene):(polystyrene sulfonate) (PEDOT:PSS) affect the performance of many organic electronic devices. The work function determines the efficiency of the charge carrier transfer between PEDOT:PSS electrodes and the active layer of the device. The surface free energy affects phase separation in multicomponent blends that are typically used to fabricate active layers of organic light-emitting diodes and photovoltaic devices. Here, we present a method to prepare PEDOT:PSS films with a gradient work function and surface free energy. This modification was achieved by evaporation of trimethoxy(3,3,3-trifluoropropyl)silane in such a way that the degree of surface coverage of the molecules varied in the selected direction. Gradient films were used as electrodes to fabricate two-terminal PEDOT:PSS/poly(3-hexyl thiophene)/Au devices to rapidly screen for the influence of the modification on the performance of the prepared polymer diodes. Gradual changes in the morphology of the solution-cast model poly(3-butyl thiophene)/poly-bromostyrene films followed changes in the surface energy of the substrate.

| S-EPMC6641617 | biostudies-literature

A Bilayered Wood-Poly(3,4-ethylenedioxythiophene):Polystyrene Sulfonate Hydrogel Interfacial Evaporator for Sustainable Solar-Driven Sewage Purification and Desalination.

Project description:Solar-driven interfacial evaporation and purification is a promising solar energy conversion technology to produce clean water or solve water scarcity. Although wood-based photothermal materials have attracted particular interest in solar water purification and desalination due to their rapid water supply and great heat localization, challenges exist given their complicated processing methods and relatively poor stability. Herein, we propose a facile approach for fabricating a bilayered wood-poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (wood-PEDOT:PSS) hydrogel interfacial evaporator by direct drop-casting and dry-annealing. Benefiting from the unique combined merits of the wood-PEDOT:PSS hydrogel evaporator, i.e., excellent light absorption (~99.9%) and efficient photothermal conversion of nanofibrous PEDOT:PSS and the strong hydrophilicity and fast water transport from wood, the as-fabricated bilayered wood-PEDOT:PSS hydrogel evaporator demonstrates a remarkably high evaporation rate (~1.47 kg m-2 h-1) and high energy efficiency (~75.76%) at 1 kW m-2. We further demonstrate the practical applications of such an evaporator for sewage purification and desalination, showing outstanding performance stability and partial salt barrier capability against a continuous 10-day test in simulated seawater and an ultrahigh ion removal rate of 99.9% for metal ion-containing sewage. The design and fabrication of such novel, efficient wood-based interfacial evaporators pave the way for large-scale applications in solar water purification.

| S-EPMC10457931 | biostudies-literature

CdS quantum dots modified CuO inverse opal electrodes for ultrasensitive electrochemical and photoelectrochemical biosensor.

Project description:The CuO inverse opal photonic crystals (IOPCs) were synthesized by the sol-gel method and modified with CdS quantum dots by successive ionic layer adsorption and reaction (SILAR). CdS QDs modified CuO IOPCs FTO electrodes of different SILAR cycles were fabricated and their electrochemical properties were studied by cyclic voltammetry (CV) and chronoamperometry (I-t). Structure and morphology of the samples were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), high-resolution TEM (HRTEM), Energy-dispersive X-ray analysis (EDX) and X-ray diffraction pattern (XRD). The result indicated that the structure of IOPCs and loading of CdS QDs could greatly improve the electrochemical properties. Three SILAR cycles of CdS QDs sensitization was the optimum condition for preparing electrodes, it exhibited a sensitivity of 4345??A mM(-1) cm(-2) to glucose with a 0.15??M detection limit (S/N= 3) and a linear range from 0.15??M to 0.5?mM under a working potential of +0.7?V. It also showed strong stability, good reproducibility, excellent selectivity and fast amperometric response. This work provides a promising approach for realizing excellent photoelectrochemical nonenzymatic glucose biosensor of similar composite structure.

| S-EPMC4455289 | biostudies-literature

Coexistence of Write Once Read Many Memory and Memristor in blend of Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate and Polyvinyl Alcohol.

Project description:In this work, the coexistence of Write Once Read Many Memory (WORM) and memristor can be achieved in a single device of Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT: PSS) and Polyvinyl Alcohol (PVA) blend organic memory system. In memristor mode, the bistable resistance states of the device can be cycled for more than 1000 times. Once a large negative bias of -8V was applied to the device, it was switched to permanent high resistance state that cannot be restored back to lower resistance states. The mechanism of the memristor effect can be attributed to the charge trapping behaviour in PVA while the WORM effect can be explained as the electrochemical characteristic of PEDOT: PSS which harnesses the percolative conduction pathways. The results may facilitate multipurpose memory device with active tunability.

| S-EPMC5150231 | biostudies-literature

2D titanium carbide (MXene) for wireless communication.

Project description:With the development of the Internet of Things (IoT), the demand for thin and wearable electronic devices is growing quickly. The essential part of the IoT is communication between devices, which requires radio-frequency (RF) antennas. Metals are widely used for antennas; however, their bulkiness limits the fabrication of thin, lightweight, and flexible antennas. Recently, nanomaterials such as graphene, carbon nanotubes, and conductive polymers came into play. However, poor conductivity limits their use. We show RF devices for wireless communication based on metallic two-dimensional (2D) titanium carbide (MXene) prepared by a single-step spray coating. We fabricated a ~100-nm-thick translucent MXene antenna with a reflection coefficient of less than -10 dB. By increasing the antenna thickness to 8 ?m, we achieved a reflection coefficient of -65 dB. We also fabricated a 1-?m-thick MXene RF identification device tag reaching a reading distance of 8 m at 860 MHz. Our finding shows that 2D titanium carbide MXene operates below the skin depth of copper or other metals as well as offers an opportunity to produce transparent antennas. Being the most conductive, as well as water-dispersible, among solution-processed 2D materials, MXenes open new avenues for manufacturing various classes of RF and other portable, flexible, and wearable electronic devices.

| S-EPMC6155117 | biostudies-literature

Investigation of titanium coated imprinted polystyrene surfaces

Project description:In this study the gene expression differences between two titanium surfaces produced at Maastricht University were investigated. These two surfaces were: flat titanium-coated polystyrene and a titanium-coated polystyrene surface imprinted with a pattern selected from an earlier screening study (Ti1018). This pattern was selected based on the osteoinductive properties observed. As a positive control cells on the flat surface were treated with dexamethasone.

2018-09-25 | E-MTAB-7212 | biostudies-arrayexpress

Interaction behavior of polyion-counterion for sodium polystyrene sulfonate.

Project description:The specific conductances are measured for sodium polystyrene sulfonate in water and methanol-water mixture. The equivalent conductivity data against concentration are evaluated by scaling concept. The effects of the solvent composition and the polyelectrolyte concentration on the fractions of uncondensed counterions (f) , the polyion conductivities λp , the standard state free energies of counterion association ΔGAo , and the polyion transference number TP are calculated. The charge density (ξ) of sodium polystyrene sulfonate was used for the research article [1] to see the variation of the critical aggregation concentration of cetyltrimethyl ammonium bromide in sodium polystyrene sulfonate against the charge density of sodium polystyrene sulfonate.

| S-EPMC6710635 | biostudies-literature

3,4-Dimethyl-anilinium 4-methyl-benzene-sulfonate.

Project description:In the crystal structure of the title compound, C(8)H(12)N(+)·C(7)H(7)O(3)S(-), N-H?O hydrogen bonds link the cations and anions into ribbons parallel to the c axis. N-H?S inter-actions also occur.

| S-EPMC3201403 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data