Dataset Information

Bioconversion of sago processing wastewater into biodiesel: Optimization of lipid production by an oleaginous yeast, Candida tropicalis ASY2 and its transesterification process using response surface methodology.

ABSTRACT:

Background

Biodiesel is an eco-friendly and renewable energy source and a valuable substitute for petro-diesel. Sago processing wastewater (SWW), a by-product of the cassava processing industry, has starch content ranging from 4 to 7 g L^-1 and serves as an outstanding source for producing microbial lipids by the oleaginous microorganisms. In the present study, Candida tropicalis ASY2 was employed to optimize single-cell oil (SCO) production using SWW and subsequent transesterification by response surface methodology. Variables such as starch content, yeast extract, airflow rate, pH, and temperature significantly influenced lipid production in a preliminary study. The lipid production was scaled up to 5 L capacity airlift bioreactor and its optimization was done by response surface methodology. The dried yeast biomass obtained under optimized conditions from 5 L bioreactor was subjected to a direct transesterification process. Biomass: methanol ratio, catalyst concentration, and time were the variables used to attain higher FAME yield in the transesterification optimization process.

Results

Under optimized conditions, the highest lipid yield of 2.68 g L^-1 was obtained with 15.33 g L^-1 of starch content, 0.5 g L^-1 of yeast extract, and 5.992 L min^-1 of airflow rate in a bioreactor. The optimized direct transesterification process yielded a higher FAME yield of 86.56% at 1:20 biomass: methanol ratio, 0.4 M catalyst concentration, and a time of 6.85 h.

Conclusions

Thus, this optimized process rendered the microbial lipids derived from C. tropicalis ASY2 as potentially alternative oil substitutes for sustainable biodiesel production to meet the rising energy demands.

SUBMITTER: Thangavelu K

PROVIDER: S-EPMC8394618 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Background:Without sufficient alternatives to crude oil, as demand continues to rise, the global economy will undergo a drastic decline as oil prices explode. Dependence on crude oil and growing environmental impairment must eventually be overcome by creating a sustainable and profitable alternative based on renewable and accessible feedstock. One of the promising solutions for the current and near-future is the substitution of fossil fuels with sustainable liquid feedstock for biofuel production. Among the different renewable liquid feedstock's studied, wastewater is the least explored one for biodiesel production. Sago wastewater is the byproduct of the cassava processing industry and has starch content ranging from 4 to 7%. The present investigation was aimed to produce microbial lipids from oleaginous yeast, Candida tropicalis ASY2 for use as biodiesel feedstock and simultaneously decontaminate the sago processing wastewater for reuse. Initial screening of oleaginous yeast to find an efficient amylolytic with maximum lipid productivity resulted in a potent oleaginous yeast strain, C. tropicalis ASY2, that utilizes SWW as a substrate. Shake flask experiments are conducted over a fermentation time of 240 h to determine a suitable fatty acid composition using GC-FID for biodiesel production with simultaneous removal of SWW pollutants using ASY2. Results:The maximum biomass of 0.021 g L-1 h-1 and lipid productivity of 0.010 g L-1 h-1 was recorded in SWW with lipid content of 49%. The yeast strain degraded cyanide in SWW (79%) and also removed chemical oxygen demand (COD), biological oxygen demand (BOD), nitrate (NO3), ammoniacal (NH4), and phosphate (PO4) ions (84%, 92%, 100%, 98%, and 85%, respectively). GC-FID analysis of fatty acid methyl esters (FAME) revealed high oleic acid content (41.33%), which is one of the primary fatty acids for biodiesel production. Conclusions:It is evident that the present study provides an innovative and ecologically sustainable technology that generates valuable fuel, biodiesel using SWW as a substrate and decontaminates for reuse.

Project description:BackgroundOleaginous microorganisms are sustainable alternatives for the production of biodiesel. Among them, oleaginous fungi are known for their rapid growth, short life cycles, no light requirement, easy scalability, and the ability to grow in cheap organic resources. Among all the sources used for biodiesel production, industrial wastewater streams have been least explored. We used oleaginous fungi to decontaminate sago processing wastewater and produce biodiesel.ResultsAmong the 15 isolates screened for lipid production and starch utilization using the Nile red staining assay and amylase plate screening, three isolates accumulated > 20% (w/w) of their dry cell mass as lipids. The isolate ASEF14 exhibited the highest lipid accumulation (> 40%) and was identified as Aspergillus caespitosus based on the 28S rRNA gene sequencing. The maximum lipid content of 54.4% in synthetic medium (SM) and 37.2% in sago processing wastewater (SWW) was produced by the strain. The Fourier-transform infrared (FTIR) spectroscopy of the fungal oil revealed the presence of functional peaks corresponding to major lipids. Principal component analysis (PCA) of the FTIR data revealed major changes in the fatty acid composition during the transition from the growth phase (Days 1-3) to the lipid accumulation phase (Days 4-7). The fatty acid methyl esters (FAME) analysis of fungal oil from SWW contained 43.82% and 9.62% of saturated and monounsaturated fatty acids, respectively. The composition and percentage of individual FAME derived from SWW were different from SM, indicating the effect of nutrient and fermentation time. The fuel attributes of the SM- and SWW-grown fungal biodiesel (kinematic viscosity, iodine value, cetane number, cloud and pour point, linolenic acid content, FA > 4 double bonds) met international (ASTM D6751, EN 14214) and national (IS 15607) biodiesel standards. In addition to biodiesel production, the strain removed various contaminants such as total solids (TS), total suspended solids (TSS), total dissolved solids (TDS), dissolved oxygen (DO), chemical oxygen demand (COD), biological oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP), and cyanide up to 58.6%, 53.0%, 35.2%, 94.5%, 89.3%, 91.3%, 74.0%, 47.0%, and 53.84%, respectively, from SWW.ConclusionThese findings suggested that A. caespitosus ASEF14 is a potential candidate with high lipid accumulating ability (37.27%), capable of using SWW as the primary growth medium. The medium and incubation time alter the FAME profile of this fungus. The physical properties of fungal oil were in accordance with the biodiesel standards. Moreover, it decontaminated SWW by reducing several polluting nutrients and toxicants. The fungal biodiesel produced by this cost-effective method could serve as an alternate path to meet global energy demand.

Project description:To produce biodiesel cost-effective, low-cost, high free fatty acid (FFA) oil feedstock is desirable. But high FFA creates difficulty during the base-catalyzed transesterification process by yield loss due to the formation of soap. However, these problems are overcome by the use of an acid catalyst. The acid catalysts can directly convert both triglycerides and FFAs into biodiesel without the formation of soaps or emulsions. The shortcomings of mostly used inorganic acids are that they work well for esterification of FFA present in low-cost oil, but their kinetics for transesterification of triglycerides present in oils is considerably slower. Corrosion of equipment is another major problem associated with an inorganic acid catalyst. The usage of an organic acid catalyst of the alkyl benzene sulfonic type, like 4-dodecyl benzene sulfonic acid (DBSA) minimizes these disadvantages of inorganic acid-catalyzed transesterification. The aim of the present investigation was to reduce the reaction time of transesterification of triglycerides further by using microwaves as a heating source in the presence of DBSA catalyst to achieve higher conversions under mild operating conditions. To optimize the transesterification variables for the higher conversion of biodiesel, the response surface methodology was employed to design the experiment. By using the DBSA catalyst under microwave heating at a temperature of 76 °C, conversion close to 100% in only 30 min of reaction time was obtained using a 0.09 molar ratio of catalyst to oil and 9.0 molar ratio of methanol to oil. A modified polynomial model was developed and was adequately fitted with the experimental data and could be used for understanding the effect of various process parameters. The catalyst to oil molar ratio and reaction temperature created a stronger effect on the biodiesel production than that exhibited by the methanol to oil molar ratio. It was observed that the microwave heating process outperformed conventional heating, providing a rapid, easy method for biodiesel synthesis from triglycerides in the presence of DBSA, an organic acid catalyst. The produced biodiesel was of good quality, as all the properties were within the prescribed limits of the ASTM D6751 standard.