High-cell-density fed-batch cultivations of Vibrio natriegens.
Ontology highlight
ABSTRACT: Objectives
With generation times of less than 10 min under optimal conditions, the halophilic Vibrio natriegens is the fastest growing non-pathogenic bacterium isolated so far. The availability of the full genome and genetic engineering tools and its ability to utilize a wide range of carbon sources make V. natriegens an attractive host for biotechnological production processes. However, high-cell-density cultivations, which are desired at industrial-scale have not been described so far.Results
In this study we report fed-batch cultivations of V. natriegens in deep-well plates and lab-scale bioreactor cultivations at different temperatures in mineral salt medium (MSM). Upon switching from exponential glucose to constant glucose-feeding cell death was induced. Initial NaCl concentrations of 15-18 g L-1 and a temperature reduction from 37 to 30 °C had a positive effect on cell growth. The maximal growth rate in MSM with glucose was 1.36 h-1 with a specific oxygen uptake rate of 22 mmol gCDW-1 h-1. High biomass yields of up to 55 g L-1 after only 12 h were reached.Conclusions
The shown fed-batch strategies demonstrate the potential of V. natriegens as a strong producer in industrial biotechnology.
SUBMITTER: Thiele I
PROVIDER: S-EPMC8397650 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BackgroundO2-tolerant [NiFe]-hydrogenases offer tremendous potential for applications in H2-based technology. As these metalloenzymes undergo a complicated maturation process that requires a dedicated set of multiple accessory proteins, their heterologous production is challenging, thus hindering their fundamental understanding and the development of related applications. Taking these challenges into account, we selected the comparably simple regulatory [NiFe]-hydrogenase (RH) from Cupriavidus necator as a model for the development of bioprocesses for heterologous [NiFe]-hydrogenase production. We already reported recently on the high-yield production of catalytically active RH in Escherichia coli by optimizing the culture conditions in shake flasks.ResultsIn this study, we further increase the RH yield and ensure consistent product quality by a rationally designed high cell density fed-batch cultivation process. Overall, the bioreactor cultivations resulted in ˃130 mg L-1 of catalytically active RH which is a more than 100-fold increase compared to other RH laboratory bioreactor scale processes with C. necator. Furthermore, the process shows high reproducibility of the previously selected optimized conditions and high productivity.ConclusionsThis work provides a good opportunity to readily supply such difficult-to-express complex metalloproteins economically and at high concentrations to meet the demand in basic and applied studies.
| S-EPMC9484157 | biostudies-literature
Project description:Vibrio natriegens is a halophilic bacterium with the fastest generation time of non-pathogenic bacteria reported so far. It therefore has high potential as a production strain for biotechnological production processes or other applications in biotechnology. Culture media for V. natriegens typically contain high sodium chloride concentrations. The corresponding high chloride concentrations can lead to corrosion processes on metal surfaces in bioreactors. Here we report the development of a low-chloride chemically defined medium for V. natriegens. Sodium chloride was completely replaced by the sodium salts disodium hydrogen phosphate, disodium sulfate, and sodium citrate, while keeping the total concentration of sodium ions constant. The use of citrate prevents the occurrence of precipitates, especially of ammonium magnesium phosphate. With this defined medium, high-cell-density fed-batch cultivations in laboratory-scale bioreactors using exponential feeding yielded biomass concentrations of more than 60 g L-1. KEY POINTS: A defined medium for V. natriegens that only contains traces of chloride was developed Corrosion processes on metal surfaces in industrial bioreactors can thus be prevented High yields of biomass can be achieved in fed-batch cultivation with this medium.
| S-EPMC10638117 | biostudies-literature
Project description:BackgroundIn the biopharmaceutical industry, Escherichia coli (E. coli) strains are among the most frequently used bacterial hosts for producing recombinant proteins because they allow a simple process set-up and they are Food and Drug Administration (FDA)-approved for human applications. Widespread use of E. coli in biotechnology has led to the development of many different strains, and selecting an ideal host to produce a specific protein of interest is an important step in developing a production process. E. coli B and K-12 strains are frequently employed in large-scale production processes, and therefore are of particular interest. We previously evaluated the individual cultivation characteristics of E. coli BL21 and the K-12 hosts RV308 and HMS174. To our knowledge, there has not yet been a detailed comparison of the individual performances of these production strains in terms of recombinant protein production and system stability. The present study directly compared the T7-based expression hosts E. coli BL21(DE3), RV308(DE3), and HMS174(DE3), focusing on evaluating the specific attributes of these strains in relation to high-level protein production of the model protein recombinant human superoxide dismutase (SOD). The experimental setup was an exponential carbon-limited fed-batch cultivation with minimal media and single-pulse induction.ResultsThe host strain BL21(DE3) produced the highest amounts of specific protein, followed by HMS174(DE3) and RV308(DE3). The expression system HMS174(DE3) exhibited system stability by retaining the expression vector over the entire process time; however, it entirely stopped growing shortly after induction. In contrast, BL21(DE3) and RV308(DE3) encountered plasmid loss but maintained growth. RV308(DE3) exhibited the lowest ppGpp concentration, which is correlated with the metabolic stress level and lowest degradation of soluble protein fraction compared to both other strains.ConclusionsOverall, this study provides novel data regarding the individual strain properties and production capabilities, which will enable targeted strain selection for producing a specific protein of interest. This information can be used to accelerate future process design and implementation.
| S-EPMC3698069 | biostudies-literature
Project description:BackgroundThe fungal ribotoxin hirsutellin A (HtA) exhibits strong insecticidal activity; however, efficient systems for expressing recombinant HtA (rHtA) are lacking. Here, we established an efficient heterologous expression system to produce large amounts of rHtA.ResultsRecombinant Pichia pastoris transformants with high levels of secretory rHtA were screened, and in a fed-batch reactor, rHtA was secreted at levels up to 80 mg/l following methanol induction, which was more than sixfold higher than that in shake flasks. Approximately 7 mg of highly pure rHtA was obtained from 300 ml of fed-batch culture supernatant by Ni+-nitriloacetic acid affinity chromatography and CM Sepharose ion-exchange chromatography. Mass spectrometry results revealed rHtA as a native N-terminal non-glycosylated monomeric protein with a molecular weight of 15.3 kDa. Purified rHtA exhibited excellent thermal and protease stability and dose-dependent cytotoxicity to Sf9 insect cells and insecticidal activity against Galleria mellonella larvae.ConclusionsThis is the first report of rHtA expression in P. pastoris. The rHtA was expressed at a high level under high-cell-density fed-batch fermentation and was efficiently purified using a two-step purification method. Purified rHtA exhibited thermal and protease stability, as well as appropriate bioactivities. Our results indicate that fed-batch production by P. pastoris is an efficient method to produce functional rHtA.
| S-EPMC6195745 | biostudies-literature
Project description:In bioprocess development, the host and the genetic construct for a new biomanufacturing process are selected in the early developmental stages. This decision, made at the screening scale with very limited information about the performance in larger reactors, has a major influence on the efficiency of the final process. To overcome this, scale-down approaches during screenings that show the real cell factory performance at industrial-like conditions are essential. We present a fully automated robotic facility with 24 parallel mini-bioreactors that is operated by a model-based adaptive input design framework for the characterization of clone libraries under scale-down conditions. The cultivation operation strategies are computed and continuously refined based on a macro-kinetic growth model that is continuously re-fitted to the available experimental data. The added value of the approach is demonstrated with 24 parallel fed-batch cultivations in a mini-bioreactor system with eight different Escherichia coli strains in triplicate. The 24 fed-batch cultivations were run under the desired conditions, generating sufficient information to define the fastest-growing strain in an environment with oscillating glucose concentrations similar to industrial-scale bioreactors.
| S-EPMC7711848 | biostudies-literature
Project description:A time series of whole-genome transcription profiling of Escherichia coli K-12 W3110 was performed during a carbon-limited fed-batch process. The application of a constant feed rate led to the identification of a dynamic sequence of diverse carbon limitation responses (e.g., the hunger response) and at the same time provided a global view of how cellular and extracellular resources are used: the synthesis of high-affinity transporters guarantees maximal glucose influx, thereby preserving the phosphoenolpyruvate pool, and energy-dependent chemotaxis is reduced in order to provide a more economic "work mode." sigma(S)-mediated stress and starvation responses were both found to be of only minor relevance. Thus, the experimental setup provided access to the hunger response and enabled the differentiation of the hunger response from the general starvation response. Our previous topological model of the global regulation of the E. coli central carbon metabolism through the crp, cra, and relA/spoT modulons is supported by correlating transcript levels and metabolic fluxes and can now be extended. The substrate is extensively oxidized in the tricarboxylic acid (TCA) cycle to enhance energy generation. However, the general rate of oxidative decarboxylation within the pentose phosphate pathway and the TCA cycle is restricted to a minimum. Fine regulation of the carbon flux through these pathways supplies sufficient precursors for biosyntheses. The pools of at least three precursors are probably regulated through activation of the (phosphoenolpyruvate-)glyoxylate shunt. The present work shows that detailed understanding of the genetic regulation of bacterial metabolism provides useful insights for manipulating the carbon flux in technical production processes.
| S-EPMC2583496 | biostudies-literature
Project description:The majority of recombinant protein therapeutics are produced with Chinese Hamster Ovary (CHO) cells. Productivity depends on the initial cell line engineering in terms of integration site or choice of an appropriate promotor for the recombinant gene expression, as well as media and process parameter optimization. Here, proteomic profiling is used to identify optimization targets for a pharmaceutical relevant cell line system. Triplicates of CHO-K1 cell 2 L bioreactor fedbatch cultivations were performed and daily sampled for nLC-MS/MS proteomic analysis. Collected data from day 3 up to day 11 showed high Pearson correlation of 93.7 ± 4 % with ca. 2500 proteins quantified. The different growth phases were separated by principal component analysis and hierarchical clustering approaches. Subsequent statistical analysis revealed distinct protein profiles, where steady increase or decrease over time were the most prominent clusters. Fisher exact enrichment tests yielded in significantly enriched protein annotations which were successfully mapped to growth and metabolic changes during fedbatch cell cultivation. Major improvements in cellular and process understanding were achieved and yielded in the identification of promising new targets, like strong endogenous promotors, for cellular engineering and process optimization of this biopharmaceutical relevant cell line.
2021-01-25 | PXD018439 | Pride
Project description:BACKGROUND: The analysis of transcriptional levels of the genes involved in protein synthesis and secretion is a key factor to understand the host organism's responses to recombinant protein production, as well as their interaction with the cultivation conditions. Novel techniques such as the sandwich hybridization allow monitoring quantitatively the dynamic changes of specific RNAs. In this study, the transcriptional levels of some genes related to the unfolded protein response (UPR) and central metabolism of Pichia pastoris were analysed during batch and fed-batch cultivations using an X-33-derived strain expressing a Rhizopus oryzae lipase under control of the formaldehyde dehydrogenase promoter (FLD1), namely the alcohol oxidase gene AOX1, the formaldehyde dehydrogenase FLD1, the protein disulfide isomerase PDI, the KAR2 gene coding for the BiP chaperone, the 26S rRNA and the R. oryzae lipase gene ROL. RESULTS: The transcriptional levels of the selected set of genes were first analysed in P. pastoris cells growing in shake flask cultures containing different carbon and nitrogen sources combinations, glycerol + ammonium, methanol + methylamine and sorbitol + methylamine. The transcriptional levels of the AOX1 and FLD1 genes were coherent with the known regulatory mechanism of C1 substrates in P. pastoris, whereas ROL induction lead to the up-regulation of KAR2 and PDI transcriptional levels, thus suggesting that ROL overexpression triggers the UPR. This was further confirmed in fed-batch cultivations performed at different growth rates. Transcriptional levels of the analysed set of genes were generally higher at higher growth rates. Nevertheless, when ROL was overexpressed in a strain having the UPR constitutively activated, significantly lower relative induction levels of these marker genes were detected. CONCLUSION: The bead-based sandwich hybridization assay has shown its potential as a reliable instrument for quantification of specific mRNA species in P. pastoris cells grown in fed-batch cultures. As a proof-of-principle, the influence of the carbon and nitrogen sources, the specific growth rate, as well as the ROL overexpression on the transcriptional levels of a reduced set of bioprocess-relevant genes has been quantitatively studied, revealing that ROL overexpression and secretion seems to trigger the UPR in P. pastoris, resulting in a physiological bottleneck for the production process.
| S-EPMC1950523 | biostudies-literature
Project description:BackgroundScale-up to industrial production level of a fermentation process occurs after optimization at small scale, a critical transition for successful technology transfer and commercialization of a product of interest. At the large scale a number of important bioprocess engineering problems arise that should be taken into account to match the values obtained at the small scale and achieve the highest productivity and quality possible. However, the changes of the host strain's physiological and metabolic behavior in response to the scale transition are still not clear.ResultsHeterogeneity in substrate and oxygen distribution is an inherent factor at industrial scale (10,000 L) which affects the success of process up-scaling. To counteract these detrimental effects, changes in dissolved oxygen and pressure set points and addition of diluents were applied to 10,000 L scale to enable a successful process scale-up. A comprehensive semi-quantitative and time-dependent analysis of the exometabolome was performed to understand the impact of the scale-up on the metabolic/physiological behavior of the host microorganism. Intermediates from central carbon catabolism and mevalonate/ergosterol synthesis pathways were found to accumulate in both the 10 L and 10,000 L scale cultures in a time-dependent manner. Moreover, excreted metabolites analysis revealed that hypoxic conditions prevailed at the 10,000 L scale. The specific product yield increased at the 10,000 L scale, in spite of metabolic stress and catabolic-anabolic uncoupling unveiled by the decrease in biomass yield on consumed oxygen.ConclusionsAn optimized S. cerevisiae fermentation process was successfully scaled-up to an industrial scale bioreactor. The oxygen uptake rate (OUR) and overall growth profiles were matched between scales. The major remaining differences between scales were wet cell weight and culture apparent viscosity. The metabolic and physiological behavior of the host microorganism at the 10,000 L scale was investigated with exometabolomics, indicating that reduced oxygen availability affected oxidative phosphorylation cascading into down- and up-stream pathways producing overflow metabolism. Our study revealed striking metabolic and physiological changes in response to hypoxia exerted by industrial bioprocess up-scaling.
| S-EPMC4016033 | biostudies-literature
Project description:BackgroundSmall-scale cultivation vessels, which allow fed-batch operation mode, become more and more important for fast and reliable early process development. Recently, the polymer-based feeding system was introduced to allow fed-batch conditions in microtiter plates. Maximum glucose release rates of 0.35 mg/h per well (48-well-plate) at 37 °C can be achieved with these plates, depending on the media properties. The fed-batch cultivation of fluorescent protein-expressing E. coli at oxygen transfer rate levels of 5 mmol/L/h proved to be superior compared to simple batch cultivations. However, literature suggests that higher glucose release rates than achieved with the currently available fed-batch microtiter plate are beneficial, especially for fast-growing microorganisms. During the fed-batch phase of the cultivation, a resulting oxygen transfer rate level of 28 mmol/L/h should be achieved.ResultsCustomization of the polymer matrix enabled a considerable increase in the glucose release rate of more than 250% to up to 0.90 mg/h per well. Therefore, the molecular weight of the prepolymer and the addition of a hydrophilic PDMS-PEG copolymer allowed for the individual adjustment of a targeted glucose release rate. The newly developed polymer matrix was additionally invariant to medium properties like the osmotic concentration or the pH-value. The glucose release rate of the optimized matrix was constant in various synthetic and complex media. Fed-batch cultivations of E. coli in microtiter plates with the optimized matrix revealed elevated oxygen transfer rates during the fed-batch phase of approximately 28 mmol/L/h. However, these increased glucose release rates resulted in a prolonged initial batch phase and oxygen limitations. The newly developed polymer-based feeding system provides options to manufacture individual feed rates in a range from 0.24-0.90 mg/h per well.ConclusionsThe optimized polymer-based fed-batch microtiter plate allows higher reproducibility of fed-batch experiments since cultivation media properties have almost no influence on the release rate. The adjustment of individual feeding rates in a wide range supports the early process development for slow, average and fast-growing microorganisms in microtiter plates. The study underlines the importance of a detailed understanding of the metabolic behavior (through online monitoring techniques) to identify optimal feed rates.
| S-EPMC7457294 | biostudies-literature