Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effects of a Sodium Phosphate Electrolyte Additive on Elevated Temperature Performance of Spinel Lithium Manganese Oxide Cathodes.

ABSTRACT: LiMn2O4 (LMO) spinel cathode materials suffer from severe degradation at elevated temperatures because of Mn dissolution. In this research, monobasic sodium phosphate (NaH2PO4, P2) is examined as an electrolyte additive to mitigate Mn dissolution; thus, the thermal stability of the LMO cathode material is improved. The P2 additive considerably improves the cyclability and storage performances of LMO/graphite and LMO/LMO symmetric cells at 60 °C. We explain that P2 suppresses the hydrofluoric acid content in the electrolyte and forms a protective cathode electrolyte interphase layer, which mitigates the Mn dissolution behavior of the LMO cathode material. Considering its beneficial role, the P2 additive is a useful additive for spinel LMO cathodes that suffer from severe Mn dissolution.

SUBMITTER: Jo M

PROVIDER: S-EPMC8402163 | biostudies-literature | 2021 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Effects of a Sodium Phosphate Electrolyte Additive on Elevated Temperature Performance of Spinel Lithium Manganese Oxide Cathodes.

Jo Minsang M Park Seong-Hyo SH Lee Hochun H

Materials (Basel, Switzerland) 20210819 16

LiMn2O4 (LMO) spinel cathode materials suffer from severe degradation at elevated temperatures because of Mn dissolution. In this research, monobasic sodium phosphate (NaH2PO4, P2) is examined as an electrolyte additive to mitigate Mn dissolution; thus, the thermal stability of the LMO cathode material is improved. The P2 additive considerably improves the cyclability and storage performances of LMO/graphite and LMO/LMO symmetric cells at 60 °C. We exp ...[more]

PMID: 34443193

Similar Datasets

Cost-Efficient Film-Forming Additive for High-Voltage Lithium-Nickel-Manganese Oxide Cathodes.

Project description:The operating voltage of lithium-nickel-manganese oxide (LiNi0.5Mn1.5O4, LNMO) cathodes far exceeds the oxidation stability of the commercial electrolytes. The electrolytes undergo oxidation and decomposition during the charge/discharge process, resulting in the capacity fading of a high-voltage LNMO. Therefore, enhancing the interphasial stability of the high-voltage LNMO cathode is critical to promoting its commercial application. Applying a film-forming additive is one of the valid methods to solve the interphasial instability. However, most of the proposed additives are expensive, which increases the cost of the battery. In this work, a new cost-efficient film-forming electrolyte additive, 4-trifluoromethylphenylboronic acid (4TP), is adopted to enhance the long-term cycle stability of LNMO/Li cell at 4.9 V. With only 2 wt % 4TP, the capacity retention of LNMO/Li cell reaches up to 89% from 26% after 480 cycles. Moreover, 4TP is effective in increasing the rate performance of graphite anode. These results show that the 4TP additive can be applied in high-voltage LIBs, which significantly increases the manufacturing cost while improving the battery performance.

| S-EPMC8613853 | biostudies-literature

Fluorination Effect on Lithium- and Manganese-Rich Layered Oxide Cathodes.

Project description:Lithium- and manganese-rich (LMR) layered oxides are promising high-energy cathodes for next-generation lithium-ion batteries, yet their commercialization has been hindered by a number of performance issues. While fluorination has been explored as a mitigating approach, results from polycrystalline-particle-based studies are inconsistent and the mechanism for improvement in some reports remains unclear. In the present study, we develop an in situ fluorination method that leads to fluorinated LMR with no apparent impurities. Using well-defined single-crystal Li1.2Ni0.2Mn0.6O2 (LNMO) as a platform, we show that a high fluorination level leads to decreased oxygen activities, reduced side reactions at high voltages, and a broadly improved cathode performance. Detailed characterization reveals a particle-level Mn3+ concentration gradient from the surface to the bulk of fluorinated-LNMO crystals, ascribed to the formation of a Ni-rich LizNixMn2-xO4-yFy (x > 0.5) spinel phase on the surface and a "spinel-layered" coherent structure in the bulk where domains of a LiNi0.5Mn1.5O4 high-voltage spinel phase are integrated into the native layered framework. This work provides fundamental understanding of the fluorination effect on LMR and key insights for future development of high-energy Mn-based cathodes with an intergrown/composite crystal structure.

| S-EPMC10928714 | biostudies-literature

Introducing 4s-2p Orbital Hybridization to Stabilize Spinel Oxide Cathodes for Lithium-Ion Batteries.

Project description:Oxides composed of an oxygen framework and interstitial cations are promising cathode materials for lithium-ion batteries. However, the instability of the oxygen framework under harsh operating conditions results in fast battery capacity decay, due to the weak orbital interactions between cations and oxygen (mainly 3d-2p interaction). Here, a robust and endurable oxygen framework is created by introducing strong 4s-2p orbital hybridization into the structure using LiNi0.5 Mn1.5 O4 oxide as an example. The modified oxide delivers extraordinarily stable battery performance, achieving 71.4 % capacity retention after 2000 cycles at 1 C. This work shows that an orbital-level understanding can be leveraged to engineer high structural stability of the anion oxygen framework of oxides. Moreover, the similarity of the oxygen lattice between oxide electrodes makes this approach extendable to other electrodes, with orbital-focused engineering a new avenue for the fundamental modification of battery materials.

| S-EPMC9320803 | biostudies-literature

Amorphous Vanadium Oxide Thin Films as Stable Performing Cathodes of Lithium and Sodium-Ion Batteries.

Project description:Herein, we report additive- and binder-free pristine amorphous vanadium oxide (a-VOx) for Li- and Na-ion battery application. Thin films of a-VOx with a thickness of about 650 nm are grown onto stainless steel substrate from crystalline V2O5 target using pulsed laser deposition (PLD) technique. Under varying oxygen partial pressure (pO2) environment of 0, 6, 13 and 30 Pa, films bear O/V atomic ratios 0.76, 2.13, 2.25 and 2.0, respectively. The films deposited at 6‑30 Pa have a more atomic percentage of V5+ than that of V4+ with a tendency of later state increased as pO2 rises. Amorphous VOx films obtained at moderate pO2 levels are found superior to other counterparts for cathode application in Li- and Na-ion batteries with reversible capacities as high as 300 and 164 mAh g-1 at 0.1 C current rate, respectively. At the end of the 100th cycle, 90% capacity retention is noticed in both cases. The observed cycling trend suggests that more is the (V5+) stoichiometric nature of a-VOx better is the electrochemistry.

| S-EPMC6235769 | biostudies-literature

The Importance of Structural Uniformity and Chemical Homogeneity in Cobalt-Free Lithium Excess Nickel Manganese Oxide Cathodes.

Project description:This study explores the relationships between material quench rate during processing and the resulting structural and electrochemical properties of Li[Ni0.25 Li0.167 Mn0.583 ]O2 . Samples of this lithium-rich material are prepared with highly contrasting postfiring cooling methods: a rapid water emersion quench or closed-door oven cooling. The contrasting approaches result in samples with different structural, chemical, and electrochemical behaviors; after cycling the rapidly quenched material yields greater capacity, greater stability, and initially lower, but more stable voltages than the slower cooled samples. Through the use of scanning tunneling electron microscopy, X-Ray Diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) it is demonstrated that rapidly quenched powders are more structurally uniform and chemically homogenous before cycling. By comparing these precycling sample to postcycling samples, it is then examined how this increased structural uniformity and chemical homogeneity leads to the superior electrochemical properties of the rapidly quenched samples.

| S-EPMC10238218 | biostudies-literature

Thermal behavior and microstructures of cathodes for liquid electrolyte-based lithium batteries.

Project description:Lithium-ion batteries are widely used as a power source for portable equipment. However, the use of highly flammable organic solvents in the liquid electrolyte component in these batteries presents a serious safety concern. In this study, the thermal stability of battery cathodes comprising LiNi1/3Mn1/3Co1/3O2 (NMC) and LiPF6-based electrolyte solutions have been investigated using transmission electron microscopy (TEM) and differential scanning calorimetry (DSC) methods. Ex situ TEM measurements revealed that significant structural change occurred in the charged NMC composite after heating at a temperature above the exothermal peaks. It was found that LiF nanocrystallites precipitated in LiPF6 and that a number of nanoscale stacking faults developed in the [Formula: see text] layered structure of NMC. The results suggested that the decomposition reaction of LiPF6 and the structural change of NMC were directly associated with the exothermic reaction in the liquid electrolyte-based NMC electrode composite.

| S-EPMC6199343 | biostudies-literature

Electrochemically activated spinel manganese oxide for rechargeable aqueous aluminum battery.

Project description:Aluminum is a naturally abundant, trivalent charge carrier with high theoretical specific capacity and volumetric energy density, rendering aluminum-ion batteries a technology of choice for future large-scale energy storage. However, the frequent collapse of the host structure of the cathode materials and sluggish kinetics of aluminum ion diffusion have thus far hampered the realization of practical battery devices. Here, we synthesize AlxMnO2·nH2O by an in-situ electrochemical transformation reaction to be used as a cathode material for an aluminum-ion battery with a configuration of Al/Al(OTF)3-H2O/AlxMnO2·nH2O. This cell is not only based on aqueous electrolyte chemistry but also delivers a high specific capacity of 467 mAh g-1 and a record high energy density of 481 Wh kg-1. The high safety of aqueous electrolyte, facile cell assembly and the low cost of materials suggest that this aqueous aluminum-ion battery holds promise for large-scale energy applications.

| S-EPMC6325165 | biostudies-literature

Lithium manganese(II) diaqua-boro-phosphate monohydrate.

Project description:The title compound, LiMn(H(2)O)(2)[BP(2)O(8)]·H(2)O, is built up of an open framework of helical borophosphate ribbons inter-connected by MnO(4)(H(2)O)(2) octa-hedra, forming one-dimensional channels along [001] occupied by Li(+) cations and disordered H(2)O mol-ecules (site occupancy 0.5). The Li cations reside in two partially occupied sites [occupancies = 0.42 (3) and 0.289 (13)] near the helices.

| S-EPMC2961901 | biostudies-literature

Overlooked electrolyte destabilization by manganese (II) in lithium-ion batteries.

Project description:Transition-metal dissolution from cathode materials, manganese in particular, has been held responsible for severe capacity fading in lithium-ion batteries, with the deposition of the transition-metal cations on anode surface, in elemental form or as chelated-complexes, as the main contributor for such degradations. In this work we demonstrate with diverse experiments and calculations that, besides interfacial manganese species on anode, manganese(II) in bulk electrolyte also significantly destabilizes electrolyte components with its unique solvation-sheath structure, where the decompositions of carbonate molecules and hexafluorophosphate anion are catalyzed via their interactions with manganese(II). The manganese(II)-species eventually deposited on anode surface resists reduction to its elemental form because of its lower electrophilicity than carbonate molecule or anion, whose destabilization leads to sustained consumption. The reveal understanding of the once-overlooked role of manganese-dissolution in electrolytes provides fresh insight into the failure mechanism of manganese-based cathode chemistries, which serves as better guideline to electrolyte design for future batteries.

| S-EPMC6668472 | biostudies-literature

High Energy Density Lithium–Sulfur Batteries Based on Carbonaceous Two-Dimensional Additive Cathodes

Project description:The increasing demand for electrical energy storage makes

| S-EPMC10052352 | biostudies-literature