Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Exploration of 2D Ti₃C₂ MXene for all solution processed piezoelectric nanogenerator applications.

ABSTRACT: A new 2D titanium carbide (Ti₃C₂), a low dimensional material of the MXene family has attracted remarkable interest in several electronic applications, but its unique structure and novel properties are still less explored in piezoelectric energy harvesters. Herein, a systematic study has been conducted to examine the role of Ti₃C₂ multilayers when it is incorporated in the piezoelectric polymer host. The 0.03 g/L of Ti₃C₂ has been identified as the most appropriate concentration to ensure the optimum performance of the fabricated device with a generated output voltage of about 6.0 V. The probable reasons might be due to the uniformity of nanofiller distribution in the polyvinylidene difluoride (PVDF) and the incorporation of Ti₃C₂ in a polymer matrix is found to enhance the β-phase of PVDF and diminish the undesired α-phase configuration. Low tapping frequency and force were demonstrated to scavenge electrical energy from abundant mechanical energy resources particularly human motion and environmental stimuli. The fabricated device attained a power density of 14 µW.cm^-2 at 10.8 MΩ of load resistor which is considerably high among 2D material-based piezoelectric nanogenerators. The device has also shown stable electrical performance for up to 4 weeks and is practically able to store energy in a capacitor and light up a LED. Hence, the Ti₃C₂-based piezoelectric nanogenerator suggests the potential to realize the energy harvesting application for low-power electronic devices.

SUBMITTER: Auliya RZ

PROVIDER: S-EPMC8408174 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Solution-Processed Ti3 C2 Tx MXene Antennas for Radio-Frequency Communication.

Project description:Highly integrated, flexible, and ultrathin wireless communication components are in significant demand due to the explosive growth of portable and wearable electronic devices in the fifth-generation (5G) network era, but only conventional metals meet the requirements for emerging radio-frequency (RF) devices so far. Here, it is reported on Ti3 C2 Tx MXene microstrip transmission lines with low-energy attenuation and patch antennas with high-power radiation at frequencies from 5.6 to 16.4 GHz. The radiation efficiency of a 5.5 µm thick MXene patch antenna manufactured by spray-coating from aqueous solution reaches 99% at 16.4 GHz, which is about the same as that of a standard 35 µm thick copper patch antenna at about 15% of its thickness and 7% of the copper weight. MXene outperforms all other materials evaluated for patch antennas to date. Moreover, it is demonstrated that an MXene patch antenna array with integrated feeding circuits on a conformal surface has comparable performance with that of a copper antenna array at 28 GHz, which is a target frequency in practical 5G applications. The versatility of MXene antennas in wide frequency ranges coupled with the flexibility, scalability, and ease of solution processing makes MXene promising for integrated RF components in various flexible electronic devices.

| S-EPMC9119193 | biostudies-literature

Interfacial piezoelectric polarization locking in printable Ti3C2Tx MXene-fluoropolymer composites.

Project description:Piezoelectric fluoropolymers convert mechanical energy to electricity and are ideal for sustainably providing power to electronic devices. To convert mechanical energy, a net polarization must be induced in the fluoropolymer, which is currently achieved via an energy-intensive electrical poling process. Eliminating this process will enable the low-energy production of efficient energy harvesters. Here, by combining molecular dynamics simulations, piezoresponse force microscopy, and electrodynamic measurements, we reveal a hitherto unseen polarization locking phenomena of poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) perpendicular to the basal plane of two-dimensional (2D) Ti3C2Tx MXene nanosheets. This polarization locking, driven by strong electrostatic interactions enabled exceptional energy harvesting performance, with a measured piezoelectric charge coefficient, d33, of -52.0 picocoulombs per newton, significantly higher than electrically poled PVDF-TrFE (approximately -38 picocoulombs per newton). This study provides a new fundamental and low-energy input mechanism of poling fluoropolymers, which enables new levels of performance in electromechanical technologies.

| S-EPMC8155213 | biostudies-literature

2D/2D Heterojunction of R-scheme Ti3C2 MXene/MoS2 Nanosheets for Enhanced Photocatalytic Performance.

Project description:Combination of two-dimensional (2D) materials and semiconductors is considered to be an effective way for fabricating photocatalysts for solving the environmental pollution and energy crisis. In this work, novel 2D/2D heterojunction of R-scheme Ti3C2 MXene/MoS2 nanosheets is successfully synthesized by hydrothermal reaction. The photocatalytic activity of the Ti3C2 MXene/MoS2 composites is evaluated by photocatalytic degradation and hydrogen evolution reaction. Especially, 0.5 wt% Ti3C2 MXene/MoS2 sample exhibits optimum methyl orange (MO) degradation and H2 evolution rate of 97.4% and H2 evolution rate of 380.2 μmol h-1 g-1, respectively, which is attributed to the enhanced optical absorption ability and increased specific surface area. Additionally, Ti3C2 MXene coupled with MoS2 nanosheets is favorable for improving the photocurrent response and reducing the electrochemical impedance, leading to the enhanced electron transfer of excited semiconductor and inhibition of charge recombination. This work demonstrates that Ti3C2 MXene could be a promising carrier to construct 2D/2D heterojunction in photocatalytic degradation and hydrogen evolution reaction.

| S-EPMC7145887 | biostudies-literature

Ultrafast, One-Step, Salt-Solution-Based Acoustic Synthesis of Ti3C2 MXene.

Project description:The current quest for two-dimensional transition metal carbides and nitrides (MXenes) has been to circumvent the slow, hazardous, and laborious multistep synthesis procedures associated with conventional chemical MAX phase exfoliation. Here, we demonstrate a one-step synthesis method with local Ti3AlC2 MAX to Ti3C2Tz MXene conversion on the order of milliseconds, facilitated by proton production through solution dissociation under megahertz frequency acoustic excitation. These protons combined with fluorine ions from LiF to selectively etch the MAX phase into MXene, whose delamination is aided by the acoustic forcing. These results have important implications for the future applicability of MXenes, which crucially depend on the development of more efficient synthesis procedures. For proof-of-concept, we show that flexible electrodes fabricated by this method exhibit comparable electrochemical performance to that previously reported.

| S-EPMC8034768 | biostudies-literature

Double transition metal MXene (TixTa4-xC3) 2D materials as anodes for Li-ion batteries.

Project description:A bi-metallic titanium-tantalum carbide MXene, TixTa(4-x)C3 is successfully prepared via etching of Al atoms from parent TixTa(4-x)AlC3 MAX phase for the first time. X-ray diffractometer and Raman spectroscopic analysis proved the crystalline phase evolution from the MAX phase to the lamellar MXene arrangements. Also, the X-ray photoelectron spectroscopy (XPS) study confirmed that the synthesized MXene is free from Al after hydro fluoric acid (HF) etching process as well as partial oxidation of Ti and Ta. Moreover, the FE-SEM and TEM characterizations demonstrate the exfoliation process tailored by the TixTa(4-x)C3 MXene after the Al atoms from its corresponding MAX TixTa(4-x)AlC3 phase, promoting its structural delamination with an expanded interlayer d-spacing, which can allow an effective reversible Li-ion storage. The lamellar TixTa(4-x)C3 MXene demonstrated a reversible specific discharge capacity of 459 mAhg-1 at an applied C-rate of 0.5 °C with a capacity retention of 97% over 200 cycles. An excellent electrochemical redox performance is attributed to the formation of a stable, promising bi-metallic MXene material, which stores Li-ions on the surface of its layers. Furthermore, the TixTa(4-x)C3 MXene anode demonstrate a high rate capability as a result of its good electron and Li-ion transport, suggesting that it is a promising candidate as Li-ion anode material.

| S-EPMC7804453 | biostudies-literature

Ti3AlC2 MXene nanosheets as a novel corrosion inhibitor for carbon steel in 0.5 M sulfuric acid solution.

Project description:Herein we report that Ti3AlC2 MXene nanosheets were identified as a highly effective cathodic protection corrosion inhibitor for carbon steel in hydrochloric acid solution. Ti3AlC2 Mxene nanosheets form a stable inhibition layer on metal surfaces due to their high adsorption capacity and act as a barrier or protective film to prevent attacks from corrosive substances and thus lead to an extended metal service life.

| S-EPMC10828932 | biostudies-literature

Textured Asymmetric Membrane Electrode Assemblies of Piezoelectric Phosphorene and Ti3C2Tx MXene Heterostructures for Enhanced Electrochemical Stability and Kinetics in LIBs.

Project description:Black phosphorus with a superior theoretical capacity (2596 mAh g-1) and high conductivity is regarded as one of the powerful candidates for lithium-ion battery (LIB) anode materials, whereas the severe volume expansion and sluggish kinetics still impede its applications in LIBs. By contrast, the exfoliated two-dimensional phosphorene owns negligible volume variation, and its intrinsic piezoelectricity is considered to be beneficial to the Li-ion transfer kinetics, while its positive influence has not been discussed yet. Herein, a phosphorene/MXene heterostructure-textured nanopiezocomposite is proposed with even phosphorene distribution and enhanced piezo-electrochemical coupling as an applicable free-standing asymmetric membrane electrode beyond the skin effect for enhanced Li-ion storage. The experimental and simulation analysis reveals that the embedded phosphorene nanosheets not only provide abundant active sites for Li-ions, but also endow the nanocomposite with favorable piezoelectricity, thus promoting the Li-ion transfer kinetics by generating the piezoelectric field serving as an extra accelerator. By waltzing with the MXene framework, the optimized electrode exhibits enhanced kinetics and stability, achieving stable cycling performances for 1,000 cycles at 2 A g-1, and delivering a high reversible capacity of 524 mAh g-1 at - 20 ℃, indicating the positive influence of the structural merits of self-assembled nanopiezocomposites on promoting stability and kinetics.

| S-EPMC10774488 | biostudies-literature

Electrospinning of Flexible Poly(vinyl alcohol)/MXene Nanofiber-Based Humidity Sensor Self-Powered by Monolayer Molybdenum Diselenide Piezoelectric Nanogenerator.

Project description:Two-dimensional material has been widely investigated for potential applications in sensor and flexible electronics. In this work, a self-powered flexible humidity sensing device based on poly(vinyl alcohol)/Ti3C2Tx (PVA/MXene) nanofibers film and monolayer molybdenum diselenide (MoSe2) piezoelectric nanogenerator (PENG) was reported for the first time. The monolayer MoSe2-based PENG was fabricated by atmospheric pressure chemical vapor deposition techniques, which can generate a peak output of 35 mV and a power density of 42 mW m-2. The flexible PENG integrated on polyethylene terephthalate (PET) substrate can harvest energy generated by different parts of human body and exhibit great application prospects in wearable devices. The electrospinned PVA/MXene nanofiber-based humidity sensor with flexible PET substrate under the driven of monolayer MoSe2 PENG, shows high response of ∼40, fast response/recovery time of 0.9/6.3 s, low hysteresis of 1.8% and excellent repeatability. The self-powered flexible humidity sensor yields the capability of detecting human skin moisture and ambient humidity. This work provides a pathway to explore the high-performance humidity sensor integrated with PENG for the self-powered flexible electronic devices.

| S-EPMC8187675 | biostudies-literature

Electrostatic Self-assembly of 0D-2D SnO2 Quantum Dots/Ti3C2Tx MXene Hybrids as Anode for Lithium-Ion Batteries.

Project description:MXenes, a new family of two-dimensional (2D) materials with excellent electronic conductivity and hydrophilicity, have shown distinctive advantages as a highly conductive matrix material for lithium-ion battery anodes. Herein, a facile electrostatic self-assembly of SnO2 quantum dots (QDs) on Ti3C2Tx MXene sheets is proposed. The as-prepared SnO2/MXene hybrids have a unique 0D-2D structure, in which the 0D SnO2 QDs (~ 4.7 nm) are uniformly distributed over 2D Ti3C2Tx MXene sheets with controllable loading amount. The SnO2 QDs serve as a high capacity provider and the "spacer" to prevent the MXene sheets from restacking; the highly conductive Ti3C2Tx MXene can not only provide efficient pathways for fast transport of electrons and Li ions, but also buffer the volume change of SnO2 during lithiation/delithiation by confining SnO2 QDs between the MXene nanosheets. Therefore, the 0D-2D SnO2 QDs/MXene hybrids deliver superior lithium storage properties with high capacity (887.4 mAh g-1 at 50 mA g-1), stable cycle performance (659.8 mAh g-1 at 100 mA g-1 after 100 cycles with a capacity retention of 91%) and excellent rate performance (364 mAh g-1 at 3 A g-1), making it a promising anode material for lithium-ion batteries.

| S-EPMC7770891 | biostudies-literature

First observation on emergence of strong room-temperature ferroelectricity and multiferroicity in 2D-Ti3C2T x free-standing MXene film.

Project description:Two-dimensional (2D) multiferroics are key candidate materials towards advancement of smart technology. Here, we employed a simple synthesis approach to address the long-awaited dream of developing ferroelectric and multiferroic 2D materials, especially in the new class of materials called MXenes. The etched Ti3C2T x MXene was first synthesized after HF-treatment followed by a delamination process for successful synthesis of free-standing Ti3C2T x film. The free-standing film was then exposed to air at room-temperature and heated at different temperatures to form a TiO2 layer derived from the Ti3C2T x MXene itself. The ferroelectric measurement showed a clear polarization hysteresis loop at room-temperature. Also, due to the reported ferromagnetic behavior of Ti3C2T x MXene, our composite could show multiferroic properties at room-temperature. The magnetoelectric coupling test was also performed that showed a clear, switchable spontaneous polarization under applied magnetic field. TiO2 is reported to be an incipient ferroelectric that assumes a ferroelectric phase in composite form. The structural and morphological analysis confirmed successful synthesis of free-standing film and the Raman spectroscopy revealed the formation of different phases of TiO2 and the observed ferroelectricity could be due to structural deformation as a result of the formation of this new phase. The measured value of remanent polarization is 0.5 μC cm-2. This is the first report on the existence of a ferroelectric phase and multiferroic coupling in 2D free-standing MXene film at room-temperature which opens-up the possibility of 2D material-based electric and magnetic data storage applications at room-temperature.

| S-EPMC9426648 | biostudies-literature