Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Non-invasive Ventilation for Pediatric Hypoxic Acute Respiratory Failure Using a Simple Anesthetic Mask With 3D Printed Adaptor: A Case Report.

ABSTRACT: Non-invasive ventilation (NIV) is increasingly used in the supportive treatment of acute respiratory failure in children in the pediatric intensive care unit (PICU). However, finding an optimal fitting commercial available NIV face mask is one of the major challenges in daily practice, in particular for young children and those with specific facial features. Large air leaks and pressure-related skin injury due to suboptimal fit are important complications associated with NIV failure. Here, we describe a case of a 4-year old boy with cardiofaciocutaneous syndrome and rhinovirus-associated hypoxic acute respiratory failure who was successfully supported with NIV delivered by a simple anesthetic mask connected to a headgear by an in-house developed and 3D printed adaptor. This case is an example of the clinical challenge related to pediatric NIV masks in the PICU, but also shows the potential of alternative NIV interfaces e.g., by using a widely available and relatively cheap simple anesthetic mask. Further personalized strategies (e.g., by using 3D scanning and printing techniques) that optimize NIV mask fitting in children are warranted.

SUBMITTER: Muller GJ

PROVIDER: S-EPMC8421850 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Quadrupling the N95 Supply during the COVID-19 Crisis with an Innovative 3D-Printed Mask Adaptor.

Project description:The need for personal protective equipment during the COVID-19 pandemic is far outstripping our ability to manufacture and distribute these supplies to hospitals. In particular, the medical N95 mask shortage is resulting in healthcare providers reusing masks or utilizing masks with filtration properties that do not meet medical N95 standards. We developed a solution for immediate use: a mask adaptor, outfitted with a quarter section of an N95 respirator that maintains the N95 seal standard, thereby quadrupling the N95 supply. A variety of designs were 3D-printed and optimized based on the following criteria: seal efficacy, filter surface area and N95 respirator multiplicity. The final design is reusable and features a 3D-printed soft silicone base as well as a rigid 3D-printed cartridge to seal one-quarter of a 3M 1860 N95 mask. Our mask passed the computerized N95 fit test for six individuals. All files are publicly available with this publication. Our design can provide immediate support for healthcare professionals in dire need of medical N95 masks by extending the current supply by a factor of four.

| S-EPMC7551339 | biostudies-literature

A 3D printed smartphone adaptor for nasolaryngoscopy.

Project description:ObjectiveThe objective of this project is to create a three-dimensional (3D) printed smartphone adaptor for flexible nasolaryngoscopy (FNL) to provide an affordable alternative to commercial options and a better fit than generic telescope phone adaptors.MethodWe designed an adaptor using computer aided software to connect an iPhone XS to an Olympus Rhino-Laryngo Fibre Scope. We experimented with various 3D printing materials and iterative designs to create a case that allowed for quality recording of a nasolaryngoscope exam using the iPhone's built in ×2 telescopic zoom lens.ResultsOur 3D printed adaptor provides a cost-effective alternative to commercially available FNL smartphone adaptors and is capable of capturing high-quality images and videos of the nasopharynx and larynx. These images are useful for senior clinician review, decrease the need for repeat examination, can be utilized for education, avail telehealth review, and provides a way to digitally record examinations to electronic medical records for future comparison without the need for an endoscopy tower.ConclusionSmartphone adaptors for FNL have been established to be of clinical value. Despite being simple devices, they continue to be expensive. This potentially limits access to junior clinicians, who stand to gain most from the ability to review images of examinations with senior colleagues. Our 3D printed smartphone case provides a cost-effective alternative, with a better fit than generic adaptors, at a print cost of $29 AUD. This is $131 AUD less than the next cheapest commercial alternative. The files are freely available for use and modification.Level of evidence4.

| S-EPMC7042649 | biostudies-literature

3D Printed and Electrospun, Transparent, Hierarchical Polylactic Acid Mask Nanoporous Filter.

Project description:Face masks are becoming one of the most useful personal protective equipment with the outbreak of the coronavirus (CoV) pandemic. The entire world is experiencing shortage of disposable masks and melt-blown non-woven fabrics, which is the raw material of the mask filter. Recyclability of the discarded mask is also becoming a big challenge for the environment. Here, we introduce a facile method based on electrospinning and three-dimensional printing to make changeable and biodegradable mask filters. We printed polylactic acid (PLA) polymer struts on a PLA nanofiber web to fabricate a nanoporous filter with a hierarchical structure and transparent look. The transparent look overcomes the threatening appearance of the masks that can be a feasible way of reducing the social trauma caused by the current CoV disease-19 pandemic. In this study, we investigated the effects of nozzle temperature on the optical, mechanical, and morphological and filtration properties of the nanoporous filter.

| S-EPMC7557519 | biostudies-literature

3D-printed N95 equivalent for personal protective equipment shortages: the Kansas City Mask

Project description:Personal protective equipment (PPE) shortages represent a persistent and critical challenge during the COVID-19 pandemic. Communities of 3D printing hobbyists and experts responded by designing and producing homemade, 3D-printed PPE. This report discusses the design, manufacturing and validation of the Kansas City Mask (KC Mask). Once printed and assembled, masks were fit tested at Truman Medical Center in Kansas City, MO. The KC Mask was approved for use by pandemic response administration staff at the hospital. Fortunately, due to adequate PPE supply at the time of this publication, wide utilization of the KC mask has not been required. The authors endorse the KC Mask as a stopgap measure, proven to be effective in situations of critical PPE shortage based on Centers for Disease Control and Prevention (CDC) guidelines.

| S-EPMC7860929 | biostudies-literature

Simple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication.

Project description:The uptake of microfluidics by the wider scientific community has been limited by the fabrication barrier created by the skills and equipment required for the production of traditional microfluidic devices. Here we present simple 3D printed microfluidic devices using an inexpensive and readily accessible printer with commercially available printer materials. We demonstrate that previously reported limitations of transparency and fidelity have been overcome, whilst devices capable of operating at pressures in excess of 2000 kPa illustrate that leakage issues have also been resolved. The utility of the 3D printed microfluidic devices is illustrated by encapsulating dental pulp stem cells within alginate droplets; cell viability assays show the vast majority of cells remain live, and device transparency is sufficient for single cell imaging. The accessibility of these devices is further enhanced through fabrication of integrated ports and by the introduction of a Lego®-like modular system facilitating rapid prototyping whilst offering the potential for novices to build microfluidic systems from a database of microfluidic components.

| S-EPMC4822857 | biostudies-literature

Simple 3D printed stainless steel microreactors for online mass spectrometric analysis.

Project description:A simple flow chemistry microreactor with an electrospray ionization tip for real time mass spectrometric reaction monitoring is introduced. The microreactor was fabricated by a laser-based additive manufacturing technique from acid-resistant stainless steel 316L. The functionality of the microreactor was investigated by using an inverse electron demand Diels-Alder and subsequent retro Diels-Alder reaction for testing. Challenges and problems encountered are discussed and improvements proposed. Adsorption of reagents to the rough stainless steel channel walls, short length of the reaction channel, and making a proper ESI tip present challenges, but the microreactor is potentially useful as a disposable device.

| S-EPMC6609794 | biostudies-literature

A Fully 3D-Printed Steerable Instrument for Minimally Invasive Surgery.

Project description:In the field of medical instruments, additive manufacturing allows for a drastic reduction in the number of components while improving the functionalities of the final design. In addition, modifications for users' needs or specific procedures become possible by enabling the production of single customized items. In this work, we present the design of a new fully 3D-printed handheld steerable instrument for laparoscopic surgery, which was mechanically actuated using cables. The pistol-grip handle is based on ergonomic principles and allows for single-hand control of both grasping and omnidirectional steering, while compliant joints and snap-fit connectors enable fast assembly and minimal part count. Additive manufacturing allows for personalization of the handle to each surgeon's needs by adjusting specific dimensions in the CAD model, which increases the user's comfort during surgery. Testing showed that the forces on the instrument handle required for steering and grasping were below 15 N, while the grasping force efficiency was calculated to be 10-30%. The instrument combines the advantages of additive manufacturing with regard to personalization and simplified assembly, illustrating a new approach to the design of advanced surgical instruments where the customization for a single procedure or user's need is a central aspect.

| S-EPMC8703879 | biostudies-literature

Evaluation of Ventilation with Nasal Versus Face Mask After General Anesthesia Induction in Pediatric Patients.

Project description:BackgroundBecause of some difficulties during face mask ventilation in unconscious patients, such as upper airway obstruction patients, we conducted this study to compare nasal and face mask ventilation during general anesthesia induction.MethodsIn this clinical trial study, 70 patients between 3 and 12 years old undergoing elective lower abdominal surgery with general anesthesia were randomly divided into two groups. After administration of induction agents, one group was ventilated with the face mask and 100% oxygenation in three minutes and the other with the nasal mask. The mean expiratory volume, airway pressure, end-tidal CO2 (EtCO2), blood oxygen saturation (SpO2), and hemodynamic factors were recorded and compared in the baseline, two minutes after mask ventilation, and five minutes after intubation.ResultsThe mean EtCO2 in the second minute after ventilation was significantly higher in the nasal mask group than in the face mask group (P = 0.04). However, in the fifth minute after intubation, there was no significant difference between the two groups (P = 0.31). Other factors related to ventilation did not significantly differ between the two groups.ConclusionsIt can be concluded that nasal mask ventilation is as effective as facial mask ventilation. The nasal mask can replace the face mask if there is difficult face mask ventilation or airway obstruction.

| S-EPMC9923338 | biostudies-literature

Facile development of graphene-based air filters mounted on a 3D printed mask for COVID-19

Project description:COVID-19 belongs to a typical class of viruses that predominantly affects the human respiratory system, thereby proving to be fatal to many. The virus, along with other air pollutant particulates poses a severe threat to the human respiratory organs. Since the most common transmission mode is respiratory fomites and aerosol particulates, it is necessary to prevent their ingression through a mask. The primary use of masks is to prevent aerial particulates. This paper reveals the development of masks with air filters coated with functionalized graphene (fG) mounted on a 3D-printed facial mask replica. The fused deposition modeling (FDM) process is used for fabricating the facial mask replica. fG associated with nanosheets has an additional adsorbing capacity with a high surface area to volume ratio. fG coat is used over a polypropylene (PP) cloth through a dip coating method to enhance the antiviral and antimicrobial properties. The quality of fG was investigated through Raman spectroscopy and other characterization techniques such as SEM, XRD, and FTIR, which were used for visual interpretation of distributions of fG on a polypropylene (PP) fabric. Fabricated fG coated MB filters show 98.2% of bacterial filtration efficiency with 1.10 mbar of breathing resistance. The efficacy of the fG coated filter was tested against SARS-CoV-2 viral particles, which showed a complete arrest of viral transmission at the fG coated layer.

| S-EPMC8133801 | biostudies-literature

Simple 3D Printed Scaffold-Removal Method for the Fabrication of Intricate Microfluidic Devices.

Project description:An easy and cheap fabrication method for intricate polydimethylsiloxane microfluidic devices is presented. The acrylonitrile butadiene styrene scaffold-removal method uses cheap, off-the-shelf materials and equipment for the fabrication of intricate microfluidic devices. The versatility of the method is proven by the fabrication of 3D multilayer, ship-in-a-bottle, selective heating, sensing, and NMR microfluidic devices. The methodology is coined ESCARGOT: Embedded SCAffold RemovinG Open Technology.

| S-EPMC5034835 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data