Asphaltene biotransformation for heavy oil upgradation.
Ontology highlight
ABSTRACT:
SUBMITTER: Zargar AN
PROVIDER: S-EPMC8423941 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Deposition of asphaltene aggregates can easily depress the oil production, because it may clog the wellbores, annulus, pipelines, and surface facilities. Moreover, asphaltene molecules have a negative effect on the catalytic reactions in the refinery process. Therefore, in this work, three different ionic liquids (IL-H, IL-CH3, and IL-NO2) were synthesized, and characterized using FT-IR and NMR spectroscopy to evaluate their efficiency as asphaltene dispersants. The thermal gravimetric analysis of the prepared ILs showed that IL-H, IL-NO2, and IL-CH3 were thermally stable up to 280 °C. The ILs showed good dispersion activity of the petroleum asphaltenes, where the asphaltene onset precipitation (AOP) was changed from 7.5 to 10.5, 11, and 13.5 ml added n-heptane after the use of IL-H, IL-NO2, and IL-CH3, respectively. Moreover, the colloidal instability index of crude oil was changed from 0.92 (unstable asphaltene) to 0.69 (stable asphaltene). It is noted during the experiments that the presence of an alkyl chain attached to the ionic liquid moiety increases the efficiency of the dispersant. This may be owing to the formation of π-π* with asphaltene molecules due to the presence of electron donating group. Quantum chemical parameters were calculated for the prepared ILs, and the theoretical data confirmed the experimental results.
| S-EPMC10567904 | biostudies-literature
Project description:Asphaltenes are heavy petroleum crude oil components which limit the production of petroleum crude oil due to their aggregation and their stabilization for all petroleum crude oil water emulsions. The present study aimed to modify the chemical structures of isolated asphaltenes by converting them into amphiphilic polymers containing ionic liquid moieties (PILs) to demulsify the emulsion and replace the asphaltene layers surrounding the oil or water droplets in petroleum crude oil emulsions. The literature survey indicated that no modification occurred to produce the PILs from the asphaltenes. In this respect, the asphaltenes were modified via oxidation of the lower aliphatic chain through carboxylation followed by conversion to asphaltene acid chloride that reacted with ethoxylated N-alkyl pyridinium derivatives. Moreover, the carboxylation of asphaltenes was carried out through the Diels-Alder reaction with maleic anhydride that was linked with ethoxylated N-alkyl pyridinium derivatives to produce amphiphilic asphaltene PILs. The produced PILs from asphaltenes acid chloride and maleic anhydride were designated as AIL and AIL-2. The chemical structure and thermal stability of the polymeric asphaltene ionic liquids were evaluated. The modified structure of asphaltenes AIL and AIL-2 exhibited different thermal characteristics involving glass transition temperatures (Tg) at -68 °C and -45 °C, respectively. The new asphaltenes ionic liquids were adsorbed at the asphaltenes surfaces to demulsify the heavy petroleum crude emulsions. The demulsification data indicated that the mixing of AIL and AIL-2 100 at different ratios with ethoxylated N-alkyl pyridinium were demulsified with 100% of the water from different compositions of O:W emulsions 50:50, 90:10, and 10:90. The demulsification times for the 50:50, 90:10, and 10:90 O:W emulsions were 120, 120, and 60 min, respectively. The interaction of the PILs with asphaltene and mechanism of demulsification was also investigated.
| S-EPMC7362221 | biostudies-literature
Project description:Microbial Enhanced Oil Recovery (MEOR) is a potential technology for residual heavy oil recovery. Many heavy oil fields in Oman and elsewhere have difficulty in crude oil recovery because it is expensive due to its high viscosity. Indigenous microbes are capable of improving the fluidity of heavy oil, by changing its high viscosity and producing lighter oil fractions. Many spore-forming bacteria were isolated from soil samples collected from oil fields in Oman. Among the isolates, an autochthonous spore-forming bacterium was found to enhance heavy oil recovery, which was identified by 16S rDNA sequencing as Paenibacillus ehimensis BS1. The isolate showed maximum growth at high heavy oil concentrations within four days of incubation. Biotransformation of heavy crude oil to light aliphatic and aromatic compounds and its potential in EOR was analyzed under aerobic and anaerobic reservoir conditions. The isolates were grown aerobically in Bushnell-Haas medium with 1% (w/v) heavy crude oil. The crude oil analyzed by GC-MS showed a significant biotransformation from the ninth day of incubation under aerobic conditions. The total biotransformation of heavy crude oil was 67.1% with 45.9% in aliphatic and 85.3% in aromatic fractions. Core flooding experiments were carried out by injecting the isolates in brine supplemented with Bushnell-Haas medium into Berea sandstone cores and were incubated for twelve days under oil reservoir conditions (50°C). The extra recovered oil was analyzed by GC-MS. The residual oil recovered from core flood experiments ranged between 10-13% compared to the control experiment. The GC-MS analyses of the extra recovered oil showed 38.99% biotransformation of heavy to light oil. The results also indicated the presence of 22.9% extra aliphatic compounds in the residual crude oil recovered compared to that of a control. The most abundant compound in the extra recovered crude oil was identified as 1-bromoeicosane. The investigations showed the potential of P. ehimensis BS1 in MEOR technology by the biotransformation of heavy to lighter crude oil under aerobic and reservoir conditions. Heavy oil recovery and biotransformation to lighter components are of great economic value and a few studies have been done.
| S-EPMC5308839 | biostudies-literature
Project description:Large amount of drilling waste associated with the expansion of the Orinoco Oil Belt (OOB), the biggest proven reserve of extra-heavy crude oil (EHCO) worldwide, is usually impregnated with EHCO and highly salinized water-based drilling fluids. Oxidative exoenzymes (OE) of the lignin-degrading enzyme system (LDS) of fungi catalyse the oxidation of a wide range of toxic pollutants. However, very little evidences on fungal degradation or biotransformation of EHCO have been reported, which contain high amounts of asphaltenes and its biodegradation rate is very limited. The aims of this work were to study the ability of Pestalotiopsis palmarum BM-04 to synthesize OE, its potential to biotransform EHCO and to survive in extreme environmental conditions. Enzymatic studies of the LDS showed the ability of this fungus to overproduce high amounts of laccase (LACp) in presence of wheat bran or lignin peroxidase (LIPp) with EHCO as sole carbon and energy source (1300 U mgP(-1) in both cases). FT-IR spectroscopy with Attenuated Total Reflectance (ATR) analysis showed the enzymatic oxidation of carbon and sulfur atoms in both maltenes and asphaltenes fractions of biotreated EHCO catalysed by cell-free laccase-enriched OE using wheat bran as inducer. UV-visible spectrophotometry analysis revealed the oxidation of the petroporphyrins in the asphaltenes fraction of biotreated EHCO. Tolerance assays showed the ability of this fungus to grow up to 50,000 p.p.m. of EHCO and 2000 mM of NaCl. These results suggest that P. palmarum BM-04 is a hopeful alternative to be used in remediation processes in extreme environmental conditions of salinity and EHCO contamination, such as the drilling waste from the OOB.
| S-EPMC3815938 | biostudies-literature
Project description:In oil fields, the formation of water-in-waxy crude oil emulsion is inevitable. The dissolved/crystallized state wax can interact with asphaltenes and then greatly affect the emulsion stability. However, studies on this aspect are still insufficient. In this work, the effects of the test temperature (30 °C well above the wax appearance temperature (WAT) and 15 °C well below the WAT) and asphaltene concentration (0∼1.5 wt %) on the stability of the water-in-model waxy crude oil emulsions containing 10 wt % wax were systematically investigated. When the model crude oils contain no wax, the flowability of the oils is good and the asphaltene concentration has little influence on the oil rheology. Increasing the asphaltene concentration facilitates the adsorption of asphaltenes to the oil-water interface, thus reducing the interfacial tension and water droplet size while enhancing the interfacial dilatational modulus. The stability of the emulsions improves with the increase in the asphaltene concentration, but the emulsions are still unstable. When the model crude oils contain 10 wt % wax, the WAT slightly decreases from the initial 25 to 24 °C after the addition of asphaltenes. The oil rheology is greatly improved by the addition of 0.05 wt % asphaltenes. With the further increase of the asphaltene concentration, the improved rheological ability of the asphaltenes deteriorates rapidly. At the asphaltene concentration of 1.5 wt %, the oil rheology is dramatically aggravated. The stability of the emulsion containing 10 wt % wax is mainly controlled by two aspects: on the one hand, the dissolved-state wax (30 °C) could facilitate the adsorption of asphaltenes to the interface, further reduce the interfacial tension and the water droplet size, and enhance the interfacial dilatational modulus; on the other hand, the wax crystals precipitated in the oil phase (15 °C) can form a stronger network structure at relatively high asphaltene concentrations (0.5∼1.5 wt %) and then immobilize the water droplets. The above two aspects greatly improve the sedimentation and coalescence stabilities of the emulsions at 15 °C. In addition, we did not find persuasive evidence showing that the wax could crystallize around the water droplets and strengthen the oil-water interfacial films.
| S-EPMC8908777 | biostudies-literature
Project description:Most of the microbial degradation in oil reservoirs is believed to take place at the oil-water transition zone (OWTZ). However, a recent study indicates that there is microbial life enclosed in microliter-sized water droplets dispersed in heavy oil of Pitch Lake in Trinidad and Tobago. This life in oil suggests that microbial degradation of oil also takes place in water pockets in the oil-bearing rock of an oil leg independent of the OWTZ. However, it is unknown whether microbial life in water droplets dispersed in oil is a generic property of oil reservoirs rather than an exotic exception. Hence, we took samples from three heavy-oil seeps, Pitch Lake (Trinidad and Tobago), the La Brea Tar Pits (California, USA), and an oil seep on the McKittrick oil field (California, USA). All three tested oil seeps contained dispersed water droplets. Larger droplets between 1 and 10 μl revealed high cell densities of up to 109 cells ml-1 Testing for ATP content and LIVE/DEAD staining showed that these populations consist of active and viable microbial cells with an average of 60% membrane-intact cells and ATP concentrations comparable to those of other subsurface ecosystems. Microbial community analyses based on 16S rRNA gene amplicon sequencing revealed the presence of known anaerobic oil-degrading microorganisms. Surprisingly, the community analyses showed similarities between all three oil seeps, revealing common OTUs, although the sampling sites were thousands of kilometers apart. Our results indicate that small water inclusions are densely populated microhabitats in heavy oil and possibly a generic trait of degraded-oil reservoirs.IMPORTANCE Our results confirmed that small water droplets in oil are densely populated microhabitats containing active microbial communities. Since these microhabitats occurred in three tested oil seeps which are located thousands of kilometers away from each other, such populated water droplets might be a generic trait of biodegraded oil reservoirs and might be involved in the overall oil degradation process. Microbial degradation might thus also take place in water pockets in the oil-bearing oil legs of the reservoir rock rather than only at the oil-water transition zone.
| S-EPMC7237766 | biostudies-literature
Project description:Asphaltenes, a distinct class of molecules found in crude oil, exhibit insolubility in nonpolar solvents like n-heptane but are soluble in aromatic solvents such as toluene and benzene. Understanding asphaltenes is crucial in the petroleum industry due to their detrimental effects on oil processing, resulting in significant economic losses and production disruptions. While no singular structure defines asphaltenes, two major molecular architectures, namely archipelago and continental models, have gained wide acceptance for their consistency with various experimental investigations and subsequent use in computational studies. The archipelago model comprises two or more polyaromatic hydrocarbon entities interconnected via aliphatic side chains. In contrast, the island or continental model features a unified polyaromatic hydrocarbon moiety with 4 to 10 fused aromatic rings, averaging around 7 rings. To establish a comprehensive collection, we meticulously curated over 250 asphaltene structures derived from previous experimental and computational studies in this field. Our curation process involved an extensive literature survey, conversion of figures from publications into molecular structure files, careful verification of conversion accuracy, and structure editing to ensure alignment with molecular formulas. Our database provides digital structure files and optimized geometries for both predominant structural motifs. The optimization procedure commenced with the PM6 semi-empirical method, followed by further optimization utilizing density functional theory employing the B3LYP functional and the 6-31+G(d,p) basis set. Furthermore, we compiled a range of structural and electronic features for these molecules, serving as a valuable foundation for employing machine learning algorithms to investigate asphaltenes. This work provides a ready to use structural database of asphaltenes and sets the stage for future research endeavours in this domain.
| S-EPMC10716757 | biostudies-literature
Project description:Asphaltenes, heavy aromatic components of crude oil, are known to adsorb on surfaces and can lead to pipe clogging or hinder oil recovery. Because of their multicomponent structure, the details of their interactions with surfaces are complex. We investigate the effect of the physicochemical properties of the substrate on the extent and mechanism of this adsorption. Using wetting measurements, we relate the initial kinetics of deposition to the interfacial energy of the surface. We then quantify the long-term adsorption dynamics using a quartz crystal microbalance and ellipsometry. Finally, we investigate the mechanism and morphology of adsorption with force spectroscopy measurements as a function of surface chemistry. We determine different adsorption regimes differing in orientation, packing density, and initial kinetics on different substrate functionalizations. Specifically, we find that alkane substrates delay the initial monolayer formation, fluorinated surfaces exhibit fast adsorption but low bonding strength, and hydroxyl substrates lead to a different adsorption orientation and a high packing density of the asphaltene layer.
| S-EPMC7307966 | biostudies-literature
Project description:TOrCs biotransformation, microbial composition and functional potential in biofiltration systems
| PRJEB43767 | ENA
Project description:To model foamy-oil flow in the development of heavy oil reservoirs, three depletion experiments were conducted with foamy oil treated as a pseudo-single-phase flow. In this pseudo single phase, dispersed bubbles are viewed as a part of the oil, and the redefined effective permeability varies with the changes of pressure depletion rate, oil viscosity, and gas saturation. A mathematical expression for the effective permeability was developed based on experiments, where the viscosity of foamy oil is assumed to be approximately equal to the saturated oil under equivalent conditions. The compressibility coefficient of foamy oil is treated as a volume-weighted compressibility coefficient of that of oil and gas phases. A new mathematical model for foamy-oil flow was proposed with consideration of foamy-oil supersaturation. To validate the mathematical model, the oil recovery and the production gas-oil ratio (GOR) calculated by the new model, conventional black oil model, supersaturation model and pseudo-bubble-point (PBP) model were all compared with those of the experimental data. The new model provided a substantially improved fit to the experimental data compared with the rest three models, which verifies the suitability of the mathematical model presented for simulating foamy-oil flow in the development of heavy oil reservoirs.
| S-EPMC5561122 | biostudies-literature