Design and implementation of a jellyfish otolith-inspired MEMS vector hydrophone for low-frequency detection.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang R
PROVIDER: S-EPMC8433173 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The single-tone sound source localization (SSL) by majority of fly Ormia ochracea's ears-inspired directional microphones leaves a limited choice when an application like hearing aid (HA) demands broadband SSL. Here, a piezoelectric MEMS directional microphone using a modified mechanical model of fly's ear has been presented with primary focus to achieve SSL in most sensitive audio bands to mitigate the constraints of traditional SSL works. In the modified model, two optimized rectangular diaphragms have been pivoted by four optimized torsional beams; while the backside of the whole structure has been etched. As a result, the SSL relative to angular rotation of the incoming sound depicts the cosine dependency as an ideal pressure-gradient sensor. At the same time, the mechanical coupling leads the magnitude difference between two diaphragms which has been accounted as SSL in frequency domain. The idea behind this work has been analytical simulated first, and with the convincing mechanical results, the designed bio-inspired directional microphone (BDM) has been fabricated using commercially available MEMSCAP based on PiezoMUMPS processes. In an anechoic chamber, the fabricated device has been excited in free-field sound, and the SSL at 1 kHz frequency, rocking frequency, bending frequency, and in-between rocking and bending frequencies has been found in full compliance with the given angle of incidence of sound. With the measured inter-aural sensitivity difference (mISD) and directionality, the developed BDM has been demonstrated as a practical SSL device, and the results have been found in a perfect match with the given angle of incidence of sound. Furthermore, to facilitate the SSL in noisy environment, the noise has been optimized in all scopes, like the geometry of the diaphragm, supportive torsional beam, and sensing. As a result, the A-weighted noise of this work has been found less than 23 dBA across the audio bands, and the equivalent-input noise (EIN) has been found to be 25.52 dB SPL at 1 kHz frequency which are the lowest ever reported by a similar device. With the developed SSL in broadband-in addition to the lowest noise-the developed device can be extended in some audio applications like an HA device.
| S-EPMC7293328 | biostudies-literature
Project description:In this paper, the performance of Piezoelectric Micro Power Harvester (PMPH), which converts mechanical vibrations into electrical power via piezoelectric effect is measured based on L18 Orthogonal Array (OA) and Taguchi optimization methods, where 18 experiments are conducted instead of the trial and error approach. Eight control parameters are selected to study the proposed PMPH in the three levels. COMSOL Multiphysics 5.4 simulation software is used to examine all models in frequency and transient response analysis. MINITAB statistical software is used to analyse the simulation data through Taguchi tools and ANOVA test. The control factor, it is found, has more positive bearing on PMPH performance that has the higher delta function in Taguchi, and higher percentage in ANOVA. This method will hopefully reduce time needed in optimizing PMPH and in maintaining the material resources necessary in the fabrication process let alone cost saving [1].
| S-EPMC7704336 | biostudies-literature
Project description:Endoscopic optical-coherence tomography (OCT) systems require low cost mirrors with small footprint size, out-of-plane deflections and low bias voltage. These requirements can be achieved with electrothermal actuators based on microelectromechanical systems (MEMS). We present the design and modeling of polysilicon electrothermal actuators for a MEMS mirror (100 ?m × 100 ?m × 2.25 ?m). These actuators are composed by two beam types (2.25 ?m thickness) with different cross-section area, which are separated by 2 ?m gap. The mirror and actuators are designed through the Sandia Ultra-planar Multi-level MEMS Technology V (SUMMiT V®) process, obtaining a small footprint size (1028 ?m × 1028 µm) for actuators of 550 µm length. The actuators have out-of-plane displacements caused by low dc voltages and without use material layers with distinct thermal expansion coefficients. The temperature behavior along the actuators is calculated through analytical models that include terms of heat energy generation, heat conduction and heat energy loss. The force method is used to predict the maximum out-of-plane displacements in the actuator tip as function of supplied voltage. Both analytical models, under steady-state conditions, employ the polysilicon resistivity as function of the temperature. The electrothermal-and structural behavior of the actuators is studied considering different beams dimensions (length and width) and dc bias voltages from 0.5 to 2.5 V. For 2.5 V, the actuator of 550 µm length reaches a maximum temperature, displacement and electrical power of 115 °C, 10.3 µm and 6.3 mW, respectively. The designed actuation mechanism can be useful for MEMS mirrors of different sizes with potential application in endoscopic OCT systems that require low power consumption.
| S-EPMC6189825 | biostudies-literature
Project description:A number of physical arrangements for acoustic rainbow sensors have been suggested, where the aim is to separate different frequency components into different physical locations along the sensor. Although such spatial discrimination has been achieved with several designs of sensor, the resulting frequency responses at a given position along the sensor are generally not smoothly varying. In contrast, the cochlea provides an interesting natural example of a rainbow sensor, which has an exponential frequency distribution and whose response does vary smoothly with frequency. The design of a rainbow sensor is presented that has a number of discrete resonators and an exponential frequency distribution. We discuss the conditions for a smoothly varying frequency response in such a sensor, as part of a broader design strategy. It is shown that the damping within the resonators determines the trade-off between the frequency resolution and the number of elements required to achieve a smooth response. The connection is explained between this design and that of an effective acoustic absorber. The finite number of hair cells means that the cochlea itself can be thought of as being composed of discrete units and the conditions derived above are compared with those that are observed in the cochlea.
| S-EPMC7330050 | biostudies-literature
Project description:Robots for underwater exploration are typically comprised of rigid materials and driven by propellers or jet thrusters, which consume a significant amount of power. Large power consumption necessitates a sizeable battery, which limits the ability to design a small robot. Propellers and jet thrusters generate considerable noise and vibration, which is counterproductive when studying acoustic signals or studying timid species. Bioinspired soft robots provide an approach for underwater exploration in which the robots are comprised of compliant materials that can better adapt to uncertain environments and take advantage of design elements that have been optimized in nature. In previous work, we demonstrated that frameless DEAs could use fluid electrodes to apply a voltage to the film and that effective locomotion in an eel-inspired robot could be achieved without the need for a rigid frame. However, the robot required an off-board power supply and a non-trivial control signal to achieve propulsion. To develop an untethered soft swimming robot powered by DEAs, we drew inspiration from the jellyfish and attached a ring of frameless DEAs to an inextensible layer to generate a unimorph structure that curves toward the passive side to generate power stroke, and efficiently recovers the original configuration as the robot coasts. This swimming strategy simplified the control system and allowed us to develop a soft robot capable of untethered swimming at an average speed of 3.2 mm/s and a cost of transport of 35. This work demonstrates the feasibility of using DEAs with fluid electrodes for low power, silent operation in underwater environments.
| S-EPMC7806063 | biostudies-literature
Project description:The geometric designs of MEMS devices can profoundly impact their physical properties and eventual performances. However, it is challenging for researchers to rationally consider a large number of possible designs, as it would be very time- and resource-consuming to study all these cases using numerical simulation. In this paper, we report the use of deep learning techniques to accelerate the MEMS design cycle by quickly and accurately predicting the physical properties of numerous design candidates with vastly different geometric features. Design candidates are represented in a nonparameterized, topologically unconstrained form using pixelated black-and-white images. After sufficient training, a deep neural network can quickly calculate the physical properties of interest with good accuracy without using conventional numerical tools such as finite element analysis. As an example, we apply our deep learning approach in the prediction of the modal frequency and quality factor of disk-shaped microscale resonators. With reasonable training, our deep learning neural network becomes a high-speed, high-accuracy calculator: it can identify the flexural mode frequency and the quality factor 4.6 × 103 times and 2.6 × 104 times faster, respectively, than conventional numerical simulation packages, with good accuracies of 98.8 ± 1.6% and 96.8 ± 3.1%, respectively. When simultaneously predicting the frequency and the quality factor, up to ~96.0% of the total computation time can be saved during the design process. The proposed technique can rapidly screen over thousands of design candidates and promotes experience-free and data-driven MEMS structural designs.
| S-EPMC9424241 | biostudies-literature
Project description:In this research, a high-efficiency design method of the capacitive MEMS accelerometer is proposed. As the MEMS accelerometer has high precision and a compact structure, much research has been carried out, which mainly focused on the structural design and materials selection. To overcome the inconvenience and inaccuracy of the traditional design method, an orthogonal design and the particle swarm optimization (PSO) algorithm are introduced to improve the design efficiency. The whole process includes a finite element method (FEM) simulation, high-efficiency design, and verification. Through the theoretical analysis, the working mechanism of capacitive MEMS accelerometer is clear. Based on the comparison among the sweep calculation results of these parameters in the FEM software, four representative structural parameters are selected for further study, and they are le, nf, lf and wPM, respectively. le and lf are the length of the sensing electrode and fixed electrode on the right. nf is the number of electrode pairs, and wPM is the width of the mass block. Then, in order to reduce computation, an orthogonal design is adopted and finally, 81 experimental groups are produced. Sensitivity SV and mass Ma are defined as evaluation parameters, and structural parameters of experimental groups are imported into the FEM software to obtain the corresponding calculation results. These simulation data are imported into neural networks with the PSO algorithm. For a comprehensively accurate examination, three cases are used to verify our design method, and every case endows the performance parameters with different weights and expected values. The corresponding structural parameters of each case are given out after 24 iterations. Finally, the maximum calculation errors of SV and Ma are 1.2941% and 0.1335%, respectively, proving the feasibility of the high-efficiency design method.
| S-EPMC10609016 | biostudies-literature
Project description:This paper presents an airflow vector sensor for drones. Drones are expected to play a role in various industrial fields. However, the further improvement of flight stability is a significant issue. In particular, compact drones are more affected by wind during flight. Thus, it is desirable to detect air current directly by an airflow sensor and feedback to the control. In the case of a drone in flight, the sensor should detect wind velocity and direction, particularly in the horizontal direction, for a sudden crosswind. In addition, the sensor must also be small, light, and highly sensitive. Here, we propose a compact spherical airflow sensor for drones. Three highly sensitive microelectromechanical system (MEMS) differential pressure (DP) sensor chips were built in the spherical housing as the sensor elements. The 2D wind direction and velocity can be measured from these sensor elements. The fabricated airflow sensor was attached to a small toy drone. It was demonstrated that the sensor provided an output corresponding to the wind velocity and direction when horizontal wind was applied via a fan while the drone was flying. The experimental results demonstrate that the proposed sensor will be helpful for directly measuring the air current for a drone in flight.
| S-EPMC8838244 | biostudies-literature
Project description:Morpho butterflies are well known for their brilliant iridescent colors, which arise from periodic arrays of scales. These brilliant colors have a low angle dependence, in contrast to similar phenomena that are commonly caused by the periodic structures. We designed a structure with a low incident and viewing angle dependence inspired by Morpho butterflies. This structure was studied using the finite-difference time-domain method. The lamellae distribution of tree-like structure was found to be the determining factor for producing a low incident angle dependence. Two advanced models were designed to produce a low viewing angle dependence. Model I was constructed using two layers of scales. The particle swarm optimization algorithm was used to construct Model II. The angle dependence of Model II exhibited a large viewing angle range under various incident angles.
| S-EPMC3852364 | biostudies-other
Project description:Micro-electro mechanical system (MEMS) based oscillators are revolutionizing the timing industry as a cost effective solution, enhanced with more features, superior performance and better reliability. The design of a sustaining amplifier was triggered primarily to replenish MEMS resonator's high motion losses due to the possibility of their 'system-on-chip' integrated circuit solution. The design of a sustaining amplifier observing high gain and adequate phase shift for an electrostatic clamp-clamp (C-C) beam MEMS resonator, involves the use of an 180nm CMOS process with an unloaded Q of 1000 in realizing a fixed frequency oscillator. A net 122dBΩ transimpedance gain with adequate phase shift has ensured 17.22MHz resonant frequency oscillation with a layout area consumption of 0.121 mm2 in the integrated chip solution, the sustaining amplifier draws 6.3mW with a respective phase noise of -84dBc/Hz at 1kHz offset is achieved within a noise floor of -103dBC/Hz. In this work, a comparison is drawn among similar design studies on the basis of a defined figure of merit (FOM). A low phase noise of 1kHz, high figure of merit and the smaller size of the chip has accredited to the design's applicability towards in the implementation of a clock generative integrated circuit. In addition to that, this complete silicon based MEMS oscillator in a monolithic solution has offered a cost effective solution for industrial or biomedical electronic applications.
| S-EPMC4938437 | biostudies-literature