Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Multicomponent SF₆ decomposition product sensing with a gas-sensing microchip.

ABSTRACT: A difficult issue restricting the development of gas sensors is multicomponent recognition. Herein, a gas-sensing (GS) microchip loaded with three gas-sensitive materials was fabricated via a micromachining technique. Then, a portable gas detection system was built to collect the signals of the chip under various decomposition products of sulfur hexafluoride (SF₆). Through a stacked denoising autoencoder (SDAE), a total of five high-level features could be extracted from the original signals. Combined with machine learning algorithms, the accurate classification of 47 simulants was realized, and 5-fold cross-validation proved the reliability. To investigate the generalization ability, 30 sets of examinations for testing unknown gases were performed. The results indicated that SDAE-based models exhibit better generalization performance than PCA-based models, regardless of the magnitude of noise. In addition, hypothesis testing was introduced to check the significant differences of various models, and the bagging-based back propagation neural network with SDAE exhibits superior performance at 95% confidence.

SUBMITTER: Chu J

PROVIDER: S-EPMC8433328 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Gas-Sensing Performance of Metal Oxide Heterojunction Materials for SF6 Decomposition Gases: A DFT Study.

Project description:The online monitoring of GIS equipment can be realized through detecting SF6 decomposition gasses. Metal oxide heterojunctions are widely used as gas-sensing materials. In this study, the structural and electrical properties of In2O3-ZnO and TiO2-ZnO heterojunctions were analyzed based on density functional theory calculations. After heterojunction structural optimization, the electrical conductivity of these two heterojunctions was enhanced compared to each intrinsic model, and the electrical conductivity is ranked as follows: In2O3-ZnO heterojunction > TiO2-ZnO heterojunction. The gas-sensing response of these two heterojunctions to four SF6 decomposition gasses, H2S, SO2, SOF2, and SO2F2, was investigated. For gas adsorption systems, the adsorption energy, charge transfer, density of states, charge difference density, and frontier molecular orbitals were calculated to analyze the adsorption and gas-sensing performance. For gas adsorption on the In2O3-ZnO heterojunction surface, the induced conductivity changes are in the following order: H2S > SO2F2 > SOF2 > SO2. For gas adsorption on the TiO2-ZnO heterojunction surface, H2S and SOF2 increase conductivity, and SO2 and SO2F2 decrease conductivity.

| S-EPMC11311645 | biostudies-literature

Facile Fabrication of Au Nanoparticles/Tin Oxide/Reduced Graphene Oxide Ternary Nanocomposite and Its High-Performance SF6 Decomposition Components Sensing.

Project description:A high-performance sensor for detecting SF6 decomposition components (H2S and SOF2) was fabricated via hydrothermal method using Au nanoparticles/tin oxide/reduced graphene oxide (AuNPs-SnO2-reduced graphene oxide [rGO]) hybrid nanomaterials. The sensor has gas-sensing properties that responded and recovered rapidly at a relatively low operating temperature. The structure and micromorphology of the prepared materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Raman spectroscopy, energy-dispersive spectroscopy (EDS), and Brunauer-Emmett-Teller (BET). The gas-sensing properties of AuNPs-SnO2-rGO hybrid materials were studied by exposure to target gases. Results showed that AuNPs-SnO2-rGO sensors had desirable response/recovery time. Compared with pure rGO (210/452 s, 396/748 s) and SnO2/rGO (308/448 s, 302/467 s), the response/recovery time ratios of AuNPs-SnO2-rGO sensors for 50 ppm H2S and 50 ppm SOF2 at 110°C were 26/35 s and 41/68 s, respectively. Furthermore, the two direction-resistance changes of the AuNPs-SnO2-rGO sensor when exposed to H2S and SOF2 gas made this sensor a suitable candidate for selective detection of SF6 decomposition components. The enhanced sensing performance can be attributed to the heterojunctions with the highly conductive graphene, SnO2 films and Au nanoparticles.

| S-EPMC6660266 | biostudies-literature

Theoretical Study on Adsorption Behavior of SF6 Decomposition Components on Mg-MOF-74.

Project description:SF6 gas is an arc extinguishing medium that is widely used in gas insulated switchgear (GIS). When insulation failure occurs in GIS, it leads to the decomposition of SF6 in partial discharge (PD) and other environments. The detection of the main decomposition components of SF6 is an effective method to diagnose the type and degree of discharge fault. In this paper, Mg-MOF-74 is proposed as a gas sensing nanomaterial for detecting the main decomposition components of SF6. The adsorption of SF6, CF4, CS2, H2S, SO2, SO2F2 and SOF2 on Mg-MOF-74 was calculated by Gaussian16 simulation software based on density functional theory. The analysis includes parameters of the adsorption process such as binding energy, charge transfer, and adsorption distance, as well as the change in bond length, bond angle, density of states, and frontier orbital of the gas molecules. The results show that Mg-MOF-74 has different degrees of adsorption for seven gases, and chemical adsorption will lead to changes in the conductivity of the system; therefore, it can be used as a gas sensing material for the preparation of SF6 decomposition component gas sensors.

| S-EPMC10254539 | biostudies-literature

Reactivity of Xantphos-Type Rhodium Complexes Towards SF4 : SF3 Versus SF2 Complex Generation.

Project description:S-F-bond activation of sulfur tetrafluoride at [Rh(Cl)(tBu xanPOP)] (1; tBu xanPOP=9,9-dimethyl-4,5-bis-(di-tert-butylphosphino)-xanthene) led to the formation of the cationic complex [Rh(F)(Cl)(SF2 )(tBu xanPOP)][SF5 ] (2 a) together with trans-[Rh(Cl)(F)2 (tBu xanPOP)] (3) and cis-[Rh(Cl)2 (F)(tBu xanPOP)] (4) which both could also be obtained by the reaction of SF5 Cl with 1. In contrast to that, the conversion of SF4 at the methyl complex [Rh(Me)(tBu xanPOP)] (5) gave the isolable and room-temperature stable cationic λ4 -trifluorosulfanyl complex [Rh(Me)(SF3 )(tBu xanPOP)][SF5 ] (6). Treatment of 6 with the Lewis acids BF3 or AsF5 produced the dicationic difluorosulfanyl complex [Rh(Me)(SF2 )(tBu xanPOP)][BF4 ]2 (8 a) or [Rh(Me)(SF2 )(tBu xanPOP)][AsF6 ]2 (8 b), respectively. Refluorination of 8 a was possible with the use of dimethylamine giving [Rh(Me)(SF3 )(tBu xanPOP)][BF4 ] (9). A reaction of 6 with trichloroisocyanuric acid (TClCA) gave the fluorido complex [Rh(F)(Cl)(SF2 )(tBu xanPOP)][Cl] (2 b) together with chloromethane and SF5 Cl.

| S-EPMC9322540 | biostudies-literature

Dysprosium Doped Zinc Oxide for NO2 Gas Sensing.

Project description:Pure and dysprosium-loaded ZnO films were grown by radio-frequency magnetron sputtering. The films were characterized using a wide variety of morphological, compositional, optical, and electrical techniques. The crystalline structure, surface homogeneity, and bandgap energies were studied in detail for the developed nanocomposites. The properties of pure and dysprosium-doped ZnO thin films were investigated to detect nitrogen dioxide (NO2) at the ppb range. In particular, ZnO sensors doped with rare-earth materials have been demonstrated as a feasible strategy to improve the sensitivity in comparison to their pure ZnO counterparts. In addition, the sensing performance was studied and discussed under dry and humid environments, revealing noteworthy stability and reliability under different experimental conditions. In this perspective, additional gaseous compounds such as ammonia and ethanol were measured, resulting in extremely low sensing responses. Therefore, the gas-sensing mechanisms were discussed in detail to better understand the NO2 selectivity given by the Dy-doped ZnO layer.

| S-EPMC9317177 | biostudies-literature

Photo-enhanced gas sensing of SnS2 with nanoscale defects.

Project description:Recently a SnS2 based NO2 gas sensor with a 30 ppb detection limit was demonstrated but this required high operation temperatures. Concurrently, SnS2 grown by chemical vapor deposition is known to naturally contain nanoscale defects, which could be exploited. Here, we significantly enhance the performance of a NO2 gas sensor based on SnS2 with nanoscale defects by photon illumination, and a detection limit of 2.5 ppb is achieved at room temperature. Using a classical Langmuir model and density functional theory simulations, we show S vacancies work as additional adsorption sites with fast adsorption times, higher adsorption energies, and an order of magnitude higher resistance change compared with pristine SnS2. More interestingly, when electron-hole pairs are excited by photon illumination, the average adsorption time first increases and then decreases with NO2 concentration, while the average desorption time always decreases with NO2 concentration. Our results give a deep understanding of photo-enhanced gas sensing of SnS2 with nanoscale defects, and thus open an interesting window for the design of high performance gas sensing devices based on 2D materials.

| S-EPMC9059496 | biostudies-literature

Ti3C2Tx as a Sensor for SF6/N2 Nitrogen-Containing Fault Decomposition Characteristic Products: A Theoretical Study.

Project description:The SF6/N2 gas mixture is an alternative gas to SF6. SF6/N2 will decompose and generate nitrogenous characteristic gases, such as NO, NO2, N2O, and NF3, when exposed to long-term partial discharge. The adsorption models of Ti3C2Tx (T=O, F, OH) and NO, NO2, N2O, NF3 were constructed, and the most stable adsorption structure was selected in this paper. The electron density and density of states of the adsorption system were further analyzed to study the adsorption behavior, and the sensing performance was evaluated in the end. The results are as follows: four gases could be spontaneously adsorbed on Ti3C2Tx, and strong adsorption occurred when surface terminal groups were OH, forming hydrogen or chemical bonds with significant charge transfer. Results show that Ti3C2(OH)2 had a stronger sensing ability than Ti3C2F2 and Ti3C2O2. The conductivity of the Ti3C2Tx with different terminal groups was improved after the adsorption of NO and NO2, showing Ti3C2Tx had a good sensing ability for NO and NO2. It was difficult for the four gases to desorb from the Ti3C2(OH)2 surface, but the adsorption on the Ti3C2F2, Ti3C2O2 surface had a short recovery time at room temperature.

| S-EPMC9268492 | biostudies-literature

Effect of Unsaturated Sn Atoms on Gas-Sensing Property in Hydrogenated SnO2 Nanocrystals and Sensing Mechanism.

Project description:Sensing reaction mechanism is crucial for enhancing the sensing performance of semiconductor-based sensing materials. Here we show a new strategy to enhancing sensing performance of SnO2 nanocrystals by increasing the density of unsaturated Sn atoms with dangling bonds at the SnO2 surface through hydrogenation. A concept of the surface unsaturated Sn atoms serving as active sites for the sensing reaction is proposed, and the sensing mechanism is described in detail at atomic and molecule level for the first time. Sensing properties of other metal oxide sensors and catalytic activity of other catalysts may be improved by using the hydrogenation strategy. The concept of the surface unsaturated metal atoms serving as active sites may be very useful for understanding the sensing and catalytic reaction mechanisms and designing advanced sensing sensors, catalysts and photoelectronic devices.

| S-EPMC5430629 | biostudies-literature

Improved Gas Sensing Capabilities of MoS2/Diamond Heterostructures at Room Temperature.

Project description:Molybdenum disulfide (MoS2) and nanocrystalline diamond (NCD) have attracted considerable attention due to their unique electronic structure and extraordinary physical and chemical properties in many applications, including sensor devices in gas sensing applications. Combining MoS2 and H-terminated NCD (H-NCD) in a heterostructure design can improve the sensing performance due to their mutual advantages. In this study, the synthesis of MoS2 and H-NCD thin films using appropriate physical/chemical deposition methods and their analysis in terms of gas sensing properties in their individual and combined forms are demonstrated. The sensitivity and time domain characteristics of the sensors were investigated for three gases: oxidizing NO2, reducing NH3, and neutral synthetic air. It was observed that the MoS2/H-NCD heterostructure-based gas sensor exhibits improved sensitivity to oxidizing NO2 (0.157%·ppm-1) and reducing NH3 (0.188%·ppm-1) gases compared to pure active materials (pure MoS2 achieves responses of 0.018%·ppm-1 for NO2 and -0.0072%·ppm-1 for NH3, respectively, and almost no response for pure H-NCD at room temperature). Different gas interaction model pathways were developed to describe the current flow mechanism through the sensing area with/without the heterostructure. The gas interaction model independently considers the influence of each material (chemisorption for MoS2 and surface doping mechanism for H-NCD) as well as the current flow mechanism through the formed P-N heterojunction.

| S-EPMC10360066 | biostudies-literature

Rh-doped MoTe2 Monolayer as a Promising Candidate for Sensing and Scavenging SF6 Decomposed Species: a DFT Study.

Project description:In this work, the adsorption and sensing behaviors of Rh-doped MoTe2 (Rh-MoTe2) monolayer upon SO2, SOF2, and SO2F2 are investigated using first-principles theory, wherein the Rh doping behavior on the pure MoTe2 surface is included as well. Results indicate that TMo is the preferred Rh doping site with Eb of - 2.69 eV, and on the Rh-MoTe2 surface, SO2 and SO2F2 are identified as chemisorption with Ead of - 2.12 and - 1.65 eV, respectively, while SOF2 is physically adsorbed with Ead of - 0.46 eV. The DOS analysis verifies the adsorption performance and illustrates the electronic behavior of Rh doping on gas adsorption. Band structure and frontier molecular orbital analysis provide the basic sensing mechanism of Rh-MoTe2 monolayer as a resistance-type sensor. The recovery behavior supports the potential of Rh-doped surface as a reusable SO2 sensor and suggests its exploration as a gas scavenger for removal of SO2F2 in SF6 insulation devices. The dielectric function manifests that Rh-MoTe2 monolayer is a promising optical sensor for selective detection of three gases. This work is beneficial to explore Rh-MoTe2 monolayer as a sensing material or a gas adsorbent to guarantee the safe operation of SF6 insulation devices in an easy and high-efficiency manner.

| S-EPMC7295872 | biostudies-literature