A novel method for extraction, quantification, and identification of microplastics in CreamType of cosmetic products.
Ontology highlight
ABSTRACT:
SUBMITTER: Lee S
PROVIDER: S-EPMC8433340 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Microplastics are small plastic particles found ubiquitously in marine environments. In this study, a hybridized method was developed for the extraction of microplastics (45-1000 μm) from sediments using sodium bromide solution for density separation. Method development was tested using spiked microplastics as internal standards. The method was then used to extract microplastics from sediments in Narragansett Bay, Rhode Island, USA. Suspect microplastics were analyzed with Raman spectroscopy. Microplastic abundance ranged from 40 particles/100 g sediment to 4.6 million particles/100 g sediment (wet weight). Cellulose acetate fibers were the most abundant microplastic. These results are some of the first data for microplastics in Rhode Island sediments.
| S-EPMC9019827 | biostudies-literature
Project description:In recent years, microplastics (MPs) contamination has been emphasized as one of the most global ecological problems. Bottom sediments were identified as one of the major sinks of MPs, while river-lake systems - as the main transport routs of MPs into the coastal seas and the World Ocean. Thus, the MPs determination in freshwater sediments is an important task for identifying sedimentation processes and contamination sources. Density separation is commonly used to extract anthropogenic particles from bottom sediments. The proposed method is dedicated to determining the abundance of MPs in freshwater organic-rich sediments. Repeated wet peroxide oxidation was applied to digest organic matter that can hamper the microplastic determination in a sample. Potassium formate with a density 1.5 g/mL was used as a separation solution. This method is intended to identify various types of MPs (fibers, films, fragments and beads) ranging in size from 0.174 to 5 mm. The effectiveness of the MPs extraction with potassium formate was 98.0 ± 2 % (р = 0.05; n = 16), while the extraction of MPs when analyzed under a microscope was 92.0 ± 4% (р = 0.05; n = 20).
| S-EPMC7691543 | biostudies-literature
Project description:Sampling, separation, detection, and characterization of microplastics (MPs) dispersed in natural water bodies and ecosystems is a challenging and critical issue for a better understanding of the hazards for the environment posed by such nearly ubiquitous and still largely unknown form of pollution. There is still the need for exhaustive, reliable, accurate, reasonably fast, and cost-efficient analytical protocols allowing the quantification not only of MPs but also of nanoplastics (NPs) and of the harmful molecular pollutants that may result from degrading plastics. Here a set of newly developed analytical protocols, integrated with specialized techniques such as pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS), for the accurate and selective determination of the polymers most commonly found as MPs polluting marine and freshwater sediments are presented. In addition, the results of an investigation on the low molecular weight volatile organic compounds (VOCs) released upon photo-oxidative degradation of microplastics highlight the important role of photoinduced fragmentation at a molecular level both as a potential source of hazardous chemicals and as accelerators of the overall degradation of floating or stranded plastic debris.
| S-EPMC8384832 | biostudies-literature
Project description:The agri-food industry is currently one of the main engines of economic development worldwide. The region of Murcia is a reference area in Europe for the cultivation of fruits and vegetables and produces the bulk of Spanish exports of broccoli (Brassica oleracea var. italica). The processing of fresh produce generates a huge number of by-products that represent an important economic and environmental problem when discarded. In this work, an advanced extraction technique using environmentally friendly solvents was applied to assess the revalorization of broccoli by-products, by performing a comparative analysis with conventional extraction. To achieve this goal, supercritical fluid extraction based on response surface methodology was performed using CO2 and ethanol as solvents. The results obtained showed that the supercritical fluid extracts were rich in β-carotene, phenolic compounds, chlorophylls and phytosterols. Moreover, in bioactivity assays, the supercritical fluid extracts exhibited a high antioxidant activity and a cytoprotective effect in a non-tumorigenic keratinocyte cell line exposed to ultraviolet B light. The results indicate that supercritical fluid extracts from broccoli by-products could potentially serve as an ingredient for cosmetic purposes.
| S-EPMC7760773 | biostudies-literature
Project description:In the present work, a method based on solvent extraction and gas chromatography-mass spectrometry (GC-MS) has been validated for the determination of 1,4-dioxane in cosmetics. Various solvents including ethyl acetate, hexane, methanol, dichloromethane and acetone have been used for the extraction of 1,4-dioxane, among them the ethyl acetate was found to be the most efficient extracting solvent. This method has offered excellent quality parameters for instance linearity (R2?>?0.9991), limit of detection (LOD, 0.00065-0.00091?µg/mL), limit of quantification (LOQ, 0.00217-0.00304?µg/mL) and, precision intra-day (1.65-2.60%, n?=?5) and inter-day (0.16-0.32%, n?=?5) in terms of relative standard deviation (RSD%). A total of thirty-nine cosmetic samples of different brands and origin have been studied. Among them, the 1,4-dioxane was found in twenty-three samples (FB1-FB7, MC1-MC4, MC6-MC8, HS3, HS5, BL1-BL3, BL5 and PLD1-PLD3) at the levels between 0.15?µg/mL and 9.92?µg/mL, whereas in sixteen samples (MC5, HS1, HS2, SG1-SG5, BL4 and HP1- HP6) was found to be not detected. The recovery values were achieved between 93% and 99% in both low and high level of spiked samples. In comparison to the traditional analytical techniques, the proposed method was found to be very sensitive and cost-effective for the routine analysis of 1,4-dioxane at low concentration in cosmetics.
| S-EPMC7090059 | biostudies-literature
Project description:The aim of this study was to develop and validate a simple, fast, and universal reversed-phase high-performance liquid chromatography method with fluorescence detection for the quantitation and evaluation of the stability of bakuchiol in cosmetic products. The analyte was extracted by tetrahydrofuran and separated on a Zorbax Eclipse Plus C18 analytical column (100 × 4.6 mm, 3.5 μm particle size) by a gradient elution program with the mobile phase consisting of water and acetonitrile and a flow rate of 1.0 mL min-1. The column temperature was held at 25 °C and fluorescence detection was performed at excitation and emission wavelengths of 264 and 338 nm, respectively. The stability studies of bakuchiol in cosmetic products were conducted under various conditions, including thermal and photolytic degradation, according to International Conference on Harmonization Guidelines. The calibration curve was linear in the range of 0.5-50.0 μg g-1 with a correlation coefficient greater than 0.9999. The limits of detection and quantification of the method were 0.1 and 0.5 μg g-1, respectively. Recovery values were in the range of 93.37-106.39 μg g-1, with relative standard deviations less than 6%. The method has been successfully applied to analyze different types of cosmetic products and proved to be reliable.
| S-EPMC10449805 | biostudies-literature
Project description:A reliable analytical method has been developed to quantify poly(vinyl chloride) (PVC) in environmental samples. Quantification was conducted via combustion ion chromatography (C-IC). Hydrogen chloride (HCl) was quantitatively released from PVC during thermal decomposition and trapped in an absorption solution. Selectivity of the marker HCl in complex environmental samples was ensured using cleanup via pressurized liquid extraction (PLE) with methanol at 100 °C (discarded) and tetrahydrofuran at 185 °C (collected). Using this method, recoveries of 85.5 ± 11.5% and a limit of quantification down to 8.3 μg/g were achieved. A variety of hard and soft PVC products could be successfully analyzed via C-IC with recoveries exceeding >95%. Furthermore, no measurable overdetermination was found for various organic and inorganic matrix ingredients, such as sodium chloride, sucralose, hydroxychloroquine, diclofenac, chloramphenicol, triclosan, or polychlorinated biphenyls. In addition, sediments and suspended particular matter showed PVC concentrations ranging up to 16.0 and 220 μg/g, respectively. However, the gap between determined polymer mass and particle masses could be significant since soft PVC products contain plasticizers up to 50 wt %. Hence, the results of the described method represent a sum of all chlorine-containing polymers, which are extractable under the chosen conditions.
| S-EPMC10061920 | biostudies-literature
Project description:Advances in next-generation sequencing (NGS) technology has provided us with an opportunity to analyze and evaluate the rich microbial communities present in all natural environments. The shorter reads obtained from the shortgun technology has paved the way for determining the taxonomic profile of a community by simply aligning the reads against the available reference genomes. While several computational methods are available for taxonomic profiling at the genus- and species-level, none of these methods are effective at the strain-level identification due to the increasing difficulty in detecting variation at that level. Here, we present MetaID, an alignment-free n-gram based approach that can accurately identify microorganisms at the strain level and estimate the abundance of each organism in a sample, given a metagenomic sequencing dataset.MetaID is an n-gram based method that calculates the profile of unique and common n-grams from the dataset of 2,031 prokaryotic genomes and assigns weights to each n-gram using a scoring function. This scoring function assigns higher weightage to the n-grams that appear in fewer genomes and vice versa; thus, allows for effective use of both unique and common n-grams for species identification. Our 10-fold cross-validation results on a simulated dataset show a remarkable accuracy of 99.7% at the strain-level identification of the organisms in gut microbiome. We also demonstrated that our model shows impressive performance even by using only 25% or 50% of the genome sequences for modeling. In addition to identification of the species, our method can also estimate the relative abundance of each species in the simulated metagenomic samples. The generic approach employed in this method can be applied for accurate identification of a wide variety of microbial species (viruses, prokaryotes and eukaryotes) present in any environmental sample.The proposed scoring function and approach is able to accurately identify and estimate the entire taxa in any metagenomic community. The weights assigned to the common n-grams by our scoring function are precisely calibrated to match the reads up to the strain level. Our multipronged validation tests demonstrate that MetaID is sufficiently robust to accurately identify and estimate the abundance of each taxon in any natural environment even when using incomplete or partially sequenced genomes.
| S-EPMC4042266 | biostudies-literature
Project description:ObjectiveWe describe a new method for identifying and quantifying the magnitude and rate of short-term weight faltering episodes, and assess how (a) these episodes relate to broader growth outcomes, and (b) different data collection intervals influence the quantification of weight faltering.Materials and methodsWe apply this method to longitudinal growth data collected every other day across the first year of life in Gambian infants (n = 124, males = 65, females = 59). Weight faltering episodes are identified from velocity peaks and troughs. Rate of weight loss and regain, maximum weight loss, and duration of each episode were calculated. We systematically reduced our dataset to mimic various potential measurement intervals, to assess how these intervals affect the ability to derive information about short-term weight faltering episodes. We fit linear models to test whether metrics associated with growth faltering were associated with growth outcomes at 1 year, and generalized additive mixed models to determine whether different collection intervals influence episode identification and metrics.ResultsThree hundred weight faltering episodes from 119 individuals were identified. The number and magnitude of episodes negatively impacted growth outcomes at 1 year. As data collection interval increases, weight faltering episodes are missed and the duration of episodes is overestimated, resulting in the rate of weight loss and regain being underestimated.ConclusionsThis method identifies and quantifies short-term weight faltering episodes, that are in turn negatively associated with growth outcomes. This approach offers a tool for investigators interested in understanding how short-term weight faltering relates to longer-term outcomes.
| S-EPMC8247282 | biostudies-literature
Project description:Advances in biotechnology have resulted in large-scale studies of DNA methylation. A differentially methylated region (DMR) is a genomic region with multiple adjacent CpG sites that exhibit different methylation statuses among multiple samples. Many so-called "supervised" methods have been established to identify DMRs between two or more comparison groups. Methods for the identification of DMRs without reference to phenotypic information are, however, less well studied. An alternative "unsupervised" approach was proposed, in which DMRs in studied samples were identified with consideration of nature dependence structure of methylation measurements between neighboring probes from tiling arrays. Through simulation study, we investigated effects of dependencies between neighboring probes on determining DMRs where a lot of spurious signals would be produced if the methylation data were analyzed independently of the probe. In contrast, our newly proposed method could successfully correct for this effect with a well-controlled false positive rate and a comparable sensitivity. By applying to two real datasets, we demonstrated that our method could provide a global picture of methylation variation in studied samples. R source codes to implement the proposed method were freely available at http://www.csjfann.ibms.sinica.edu.tw/eag/programlist/ICDMR/ICDMR.html.
| S-EPMC4018258 | biostudies-literature